Manufacturer Navigation
Bürkle GmbH
Bürkle Laboratory Equipment at häberle – Sampling, Pumps & Accessories for ProfessionalsPremium Bürkle Products for Professional Laboratory ApplicationsBürkle has been synonymous with precision, innovation, and safety in laboratory equipment for decades. Whether in chemical analysis, pharm...
Show more
Our bestsellers
Storage bottles with threaded connector, HDPE
From
€195.00*
Colour graduation:
Blue
|
Dimensions (ØxH):
346 x 830 mm
|
Food safe:
Yes
|
Height:
830 mm
|
Manufacturer Article Number:
0402-0060
|
Material:
HDPE
|
No. of handles:
2
|
Nominal capacity:
60 l
|
UNSPSC:
41121820
|
Ø:
346 mm
Thick walled, robust storage bottles with sturdy carrying handle for safe transport and storage. The storage bottles can also be used as aspirator carboys. Via a threaded connector, a stopcock or other accessories with an inner thread / cap nut of 3/4" can be attached.Printed with blue litre graduation Food safe
Variants from €44.40*
Square wide-mouth containers, PVC, transparent
From
€1.44*
Colour:
Transparent
|
Depth:
38 mm
|
Dimensions (WxDxH):
38 x 38 x 63 mm
|
Height:
63 mm
|
Manufacturer Article Number:
0355-0050
|
Material:
PVC
|
Neck int. Ø:
23 mm
|
Nominal capacity:
50 ml
|
Type of closure:
Screw cap
|
Width:
38 mm
For liquids, powders and granules such as tablets, capsules, dyes and other samples.Screw lid PP, blackWith seal made of PE
16%
Wide-necked bottle, LDPE, transparent
€2.59*
€3.05*
(15.08% saved)
Colour:
Transparent
|
Food safe:
Yes
|
Height:
127 mm
|
Manufacturer Article Number:
0318-0250
|
Material:
LDPE
|
Material closure:
LDPE
|
Neck int. Ø:
31 mm
|
Nominal capacity:
250 ml
|
Sterile:
No
|
Thread Ø:
40 mm
|
Type of closure:
Screw cap
|
UNSPSC:
41121804
|
Ø:
64 mm
Sturdy bottle with wide-necked opening and screw cap. Particularly suitable for viscous media, powder, granules and pastes. Leakproof. Individual customer-specific printing possible.
Variants from €1.12*
Stand for Imhoff Sedimentation cones, PP
From
€93.50*
Adjustable height:
450 mm
|
Manufacturer Article Number:
7118-2000
|
Material:
PP/Steel
|
Max. adjustable height:
450 mm
|
Min. funnel Ø:
90 mm
|
No. of sedimentation cones:
2
|
UNSPSC:
41-12-18-09
The stand for sedimentation funnels is used to keep, hold or store Imhoff funnels safely and reliably during sedimentation. Two funnel holders ensure that Imhoff funnels will be held safely and securely and can be placed in an absolutely vertical position. Stand with two holders for sedimentation funnels, suitable for funnels 90 mm or more in diameter. Thanks to an innovative magnet concept no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand. With the corresponding accessory the holders for Imhoff funnels can also be replaced by holders for all-purpose funnels.PP, chrome-plated steelAdjustable height up to 450 mmFor funnels with Ø 90 mm or more
Automatic burettes with splinter protection, Schilling pattern, borosilicate glass 3.3
From
€78.50*
Division:
0.1 ml
|
Manufacturer Article Number:
9695-3015
|
Material:
Boro 3.3
|
Nominal volume burette:
15 ml
|
Overall height:
520 mm
|
Tolerance:
0,045 ± ml
|
Tolerance:
0,045 ±·ml
|
With Schellbach stripe:
Yes
Burette according to Dr. Schilling with splinter protection, with Schellbach stripes, automatic zero point extraction and Bürkle dosing device. The glass burette is covered with a plastic sheet which increases the tensile strength and serves as splinter protection. The probability that the burette breaks is reduced compared to conventional burettes and even in case the burette breaks, no dangerous splinters will be produced. The dosing device allows precise dosage via the pushbutton or via the micro-screw as well as precise dispensing via a fine spout tip.With splinter protectionAdjusted to ExShatterproof, resistant to chemicalsExact spout tip, fine droplet formationParts in contact with the medium: PE, natural rubber, PP, Borosilicate glass
22%
Jars with screw cap, LaboPlast®, PP
From
€0.26*
Colour:
White
|
Height:
31 mm
|
Manufacturer Article Number:
6214-0012
|
Material:
PP
|
Material closure:
PP
|
Nominal capacity:
12 ml
|
Sterile:
No
|
UNSPSC:
41104100
|
With cap Ø:
25 mm
White. Without residues, free of undercuts, sterilisable.
Hand pumps OTAL®, PP
€62.20*
Flow rate:
4 l/min
|
Immersion depth:
450 mm
|
Immersion tube Ø:
10 mm
|
Manufacturer Article Number:
5005-1000
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPFor small containers, up to 10 lUniversal bungs made of soft PVC, for container openings of 20 – 36 mmFor weak acids, alkalis and detergents
Siphons, LDPE/PVC
€61.60*
Flow rate:
9 l/min
|
Immersion depth:
1000 mm
|
Immersion tube Ø:
15 mm
|
Manufacturer Article Number:
5605-1000
Transparent with stopcock. Simple to use, suitable for occasional dispensing of non-aggressive liquids from a higher drum to a lower vessel, following the siphoning principle.
Our product suggestions
25%
Draining racks LaboPlast®, PVC, with drain channel
€169.13*
€225.50*
(25% saved)
Colour:
White
|
Depth:
141 mm
|
Dimensions (WxDxH):
400 x 141 x 400 mm
|
Height:
400 mm
|
Manufacturer Article Number:
9640-2040
|
Material:
PVC
|
No. of pegs:
33
|
UNSPSC:
41122805
|
Width:
400 mm
The stable rods are individually placed into the holes of the draining rack and are clicked into place. Their positions can be changed at any time.Scope of supply:Draining rack incl. wall mounting set (screws, dowels), removable drain channel incl. drainage connection and drain tube
Buckets, PP
From
€1.84*
Autoclavable:
No
|
Colour:
White
|
Food safe:
Yes
|
Height:
131 mm
|
Manufacturer Article Number:
2327-0001
|
Material:
PP
|
Nominal capacity:
1 l
|
With spout:
No
|
Ø:
132 mm
White. For transport, packaging and storage of foodstuffs, building materials and non-corrosive chemicals.Air-tight closureComplete with hermetically sealing lidFood-safe
Funnel stands LaboPlast®, PP
€90.10*
Adjustable height:
450 mm
|
Funnel:
40 ... 180 mm
|
Manufacturer Article Number:
9622-0200
|
Material:
PP/Steel
|
Max. adjustable height:
450 mm
|
Max. funnel Ø:
180 mm
|
Min. funnel Ø:
40 mm
|
No. of funnels:
2
White, unbreakable, chemically resistant.For 2 or 4 funnels. Robust, heavy base provides good stability. Variable height adjustment up to 450 mm. Thanks to a magnet system, no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand.With 2 or 4 aperture reduction inserts for small funnels. Suitable for funnels with diam. 40 to 180 mm.
Space-saving StopCock LaboPlast®, PP
From
€68.10*
Depth:
335 mm
|
Dimensions (WxDxH):
125 x 335 x 335 mm
|
Height:
335 mm
|
Manufacturer Article Number:
0435-0010
|
Material:
PP
|
Nominal capacity:
10 l
|
UNSPSC:
24112209
|
Width:
125 mm
|
With stopcock:
Yes
Space-saving StopCock set: 1 Flachmann LaboPlast® canister 5 l or 10 l with screw neck and 1 stopcock (9.139 997).
Variants from €54.10*
26%
Laboratory trays LaboPlast®, PP
From
€5.81*
Colour:
White
|
Depth int.:
176 mm
|
Ext. depth:
225 mm
|
Ext. height:
44 mm
|
Ext. width:
180 mm
|
External dimensions (WxDxH):
180 x 225 x 44 mm
|
Food safe:
Yes
|
Height int.:
39 mm
|
Int. width:
127 mm
|
Internal dimensions (WxDxH):
127 x 176 x 39 mm
|
Manufacturer Article Number:
4201-1318
|
Material:
PP
|
Max. temperature resistance:
60 °C
|
Nominal capacity:
1 l
|
Stackable:
Yes
|
Temperature resistance:
60 °C
|
With rim:
Yes
White multi-purpose trays. Injection-moulded. Durable and resist flexing, with strong, rounded rim. Stackable and hygienic. Surface is easy-to-clean. Resistant to many acids and alkaline solutions. Food-safe. Temperature resistant up to 60 °C.
Spray bottles LaboPlast®, PE / PP
€7.07*
Dimensions (ØxH):
60 x 220 mm
|
Height:
220 mm
|
Manufacturer Article Number:
0309-1025
|
Material:
PP/PE
|
Neck int. Ø:
18.0 mm
|
Nominal capacity:
250 ml
|
Nozzle Ø:
0.6 mm
|
Ø:
60 mm
Chemical resistant to a large extend. Trigger-action spray pump with continuously adjustable spray nozzle.Parts in contact with media made of PP, PE and stainless steelNozzle diameter 0.6mm; nozzle is continuously adjustableAmount sprayed per stroke: 1.2ml ±0.1ml
Pressure atomizer LaboPlast®, HDPE
€45.00*
Dimensions (ØxH):
142 x 315 mm
|
Height:
315 mm
|
Manufacturer Article Number:
0309-0100
|
Material:
HDPE
|
Max. temperature resistance:
30 °C
|
Neck int. Ø:
45 mm
|
Nominal capacity:
1500 ml
|
Ø:
142 mm
The pressure sprayer is ideal to spray a wide range of liquids uniformly. The pressurised spray has a working pressure of 4 bar. Extension for spray lance 30 cm available as accessory.Wetted parts PE, PP, glass-fibre reinforced PA, V2A, FKMBottle made of HDPEWith short spray nozzleLeft-handed and right-handed pistol controlAdjustable spray jetGraduation up to 1500 mlTemperature max. 30 °C
Powder funnels, PP
From
€44.90*
Colour:
Transparent
|
Funnel Ø:
360 mm
|
Manufacturer Article Number:
9606-0350
|
Material:
PP
|
Stem Ø:
65 mm
|
UNSPSC:
41121809
Transparent. For safe filling of containers. Food safe.
Variants from €6.95*