Top-Seller
Cylindrical, with drop-on cover. For sterilization and storage of pipette tips and small components made of glass or plastic.Accessory pipette tip rack inserts are available for Unicon 3, for easy dispensing after sterilization.
For the collection of liquid chemicals in the workplace. The HDPE filling inlet contains a self-closing ball float, an overfill spout and a spray shield. Additionally, a screw cap (GL 63) with sealing ring is included.
Light glove design for superior sensitivityGood elasticity for comfortable fit and easy finger movementsExcellent heat transfer properties for less sweatingMicro-rough structure in the finger area for safe gripOptimal combination of wall thickness and barrier propertiesAmbidextrous, non-sterilePowder-free, latex-freeExamination gloves according MDD 93/42/EWG, EN 455Protective gloves according to PPE Regulation EU 2016/425 (Cat. III)AQL 1.0According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 421, EN 420 Suitable for food handling.
For the protective storage and transportation of culture tubes.
Top-Seller
Cylindrical, with drop-on cover. For sterilization and storage of pipette tips and small components made of glass or plastic.Accessory pipette tip rack inserts are available for Unicon 3, for easy dispensing after sterilization.
For the collection of liquid chemicals in the workplace. The HDPE filling inlet contains a self-closing ball float, an overfill spout and a spray shield. Additionally, a screw cap (GL 63) with sealing ring is included.
Light glove design for superior sensitivityGood elasticity for comfortable fit and easy finger movementsExcellent heat transfer properties for less sweatingMicro-rough structure in the finger area for safe gripOptimal combination of wall thickness and barrier propertiesAmbidextrous, non-sterilePowder-free, latex-freeExamination gloves according MDD 93/42/EWG, EN 455Protective gloves according to PPE Regulation EU 2016/425 (Cat. III)AQL 1.0According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 421, EN 420 Suitable for food handling.
For the protective storage and transportation of culture tubes.
LABOR. FULL. SUPPLIED
We are laboratory specialists with our own product range and a strong partner of the most renowned manufacturers in the laboratory sector.
Our assortment ranges from consumables and equipment to chemicals and special products from the areas of research, development and quality management. Furthermore, we have a separate waste water area, which leaves nothing to be desired in this area.
The Entris® II Advance balances have a graphic touch display for easy operation and an integrated protection system for reliable weighing results.Modern sensors ensure very fast stabilisation timeAutomatic, internal calibration and adjustment function (isoCAL) for all "i" modelsReal-time levelling supportCalAuditTrail: automatic documentation of calibration and leveling processes, with date and time stampWeighing platform made of stainless steelAutomatic detection of connected Sartorius accessoriesDirect data transfer with 2 x USB-C and 1 x RS232 interface without need of additional software13 integrated applications with GLP/GMP-compliant protocolPipette Smart Test Application ProgramEasy to clean, high chemical resistanceMultilingual interfaceHigh weighing spaceEasy access to weighing platform through side doors and upper sliding doorSpecially coated windscreen against electrostatic chargeScope of supply:Analytical balance, power supply unit
DIN ISO 1773. With approximate graduations and beaded rim. From 50 ml with Retrace Code (Batch Identification), certificate available via the Internet. Erlenmeyer flasks are well suited for mixing, because of their conical shape. Uniform wall thickness distribution makes these beakers ideal for heating applications. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
Incubators for research, medicine, pharmacy, and food technology. Ideal for all applications with temperatures up to 80 °C, especially for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are excluded, and the load is warmed up particularly carefully.User-friendly, intuitive operating menuPrecise and homogeneous temperature control thanks to product-specific heating conceptPre-heated fresh air prevents temperature fluctuationsWith inner glass doorNatural convectionSterilization programme (4 h/160 °C) for sterilization of working chamberTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Tissue wiping cloth for professional use in laboratories. Highly absorbent and soft for wiping up small amounts of liquid and for cleaning pipettes and microscope slides. Chemical resistant and chemically neutral. 2-ply, white. Anti-static.
With flat PE capsWith conical bottom (15 and 50 ml) or with self-standing bottom (50 ml)Easy-to-read black volume graduationsWith a large frosted writing areaEngraved graduation at the conical bottom of each tubeMax. rotate speed up to 12000 x g for conical bottom tubes and 6000 x g for self-standing tubesAutoclavable at 121 °C and freezable to -80 °CLeak-proofFree of pyrogensDNase/RNase-freeAseptically or sterileFor research and development only.
The ergo disposable, protective, nitrile gloves combine the comfort and "feel" of latex with the physical and chemical endurance of nitrile, with no risk of allergies. The ideal glove for all applications requiring high tactile sensation and protection against chemicals.Thin - very comfortable to wearExcellent tactile sensitivity - similar to latexTried and tested quality product made of nitrileExcellent resistance to skin irritants in foodstuffsSpecially formulated for a more resilient gloveFor single use in applications with an increased need for safety when handling chemicalsFree from phthalates / softeners and allergenic latex proteinsPowder-freeEasy to wear and particularly skin-friendly through special finishing processColour: Lavender BlueSuitable for areas subject to HACCP standardsCat. III. AQL 1.5According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 420 Suitable for food handling.You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.
The powerful and user-friendly MiniSpin® plus microcentrifuge is extremely compact and have a small footprint. MiniSpin® plus provides the speed required for molecular biology separations.Especially quiet due to its carefully balanced driveMaintenance-free motorClear digital displayMinimal sample heating (after 20min. at max. speed only 12°C max. )Separate short-spin buttonAutomatic lid openingIntegral power supply unitCapacity: 12 x 1.5 / 2ml containersAutoclavable rotor (121 °C, 20 min.)Start-up / slow-down time less than 13 secs. (to / from max. speed).Includes "Black Line" aluminium rotorSpeed/rcf display switchTimer can be set for up to 99 minutesPermanent centrifuging optionThis centrifuges are General Lab Products for research purposes.
BRAND® Premium PCR platesUltra-thin walledEven and rapid heating of all samplesReinforced plate deckNo warping, no wiggling, for use with robotsFree of DNase, DNA, RNase and endotoxinsBRAND® PCR sealing filmHighly transparent for qPCRNon-tacky surfacePress-to-sealConvenient end tabsNo annoying adhesive residuesEvery package includes 50 PCR plates 96-well and 50 qPCR sealing films (Art. Nr. 4.000 237).
Can be stretched up to 200 % and clings around irregular shapes and surfaces. Parafilm® M is resistant to many polar substances such as saline solutions, inorganic acids and alkaline solutions for up to 48 hours (After this time it may become brittle).
häberle Laboratory supplies
We carry an extensive range of high-quality laboratory consumables and laboratory equipment of well-known trade names for your laboratory routine.We offer a large portfolio for the area of safety and occupational health. In particular, we round off our range with protective goggles and disposable gloves as well as chemical gloves.
We also stock a wide range of laboratory items for sampling in the area of quality assurance.
Offers
For the protective storage and transportation of culture tubes.
ISO 3819. With approximate graduations and spout. With easy-to-read scale and large labelling field for easy marking, in fired-on, highly durable white ceramic. Due to the uniformly wall thickness, it is suitable for use as a heating vessel. Glass Type I / neutral glass as per USP, EP and JP. With retrace code (Batch Identification). Certificate available via the Internet. Autoclavable.
Non-porous PFA (PFA fluoroplastic). With a central cone joint socket and GL threaded side necks as indicated, to accommodate heat sensors, electrodes or tubing. Vacuum-compatible under certain onditions. e.g. at 30 mbar pressure and 50°C max. temperature.For simple connection of tubing, we recommend the Bola laboratory screw fitting, which must be ordered separately (please ensure the correct size fitting is ordered for the tubing bore required).(Bola item numbers D 590 / D 593 / D 631 / D 632).
Autoclavable. For culture growth, transport and storage. Complete with aluminium or plastic screw cap and rubber sealing gasket. The 5 ml size has a frosted marking area.Further sizes available on request.Spare screw caps on request.
Flexible connecting line of a rubber tubing with a contracted metal spiral and double-sided end sockets according to DVGW 5501(P). Kink resistant. For connecting between safety gas connection fitting according to DIN 3383-4 and gas burners for laboratories according to DIN 30665 section 1.For all gases according to DVGW worksheet G 260, at pressures up to 100 mbar and temperatures up to 70°C. Installations according to DVGW-TRGI 2008 and DVGW worksheet G 621. DVGW Reg.-No. DG-4607AU2366. Sold only in specified lenght
