Knick Elektronische

Multi meter Portavo 904 X Multi | Type: 904 X Multi

Article number: 9774716

€2,373.34*

Packaging unit: 1 piece

on order

Product information "Multi meter Portavo 904 X Multi | Type: 904 X Multi"
The world's only portable device for liquid analysis with ATEX approval for measurements up to Zone 0/1. Ideal for applications in the process industry. For the first time, Portavo enables direct on-site testing of process measuring points. It is compatible with almost all analog and Memosens process sensors. Memosens sensors with different parameters can be checked without changing the sensor cable.
  • The new MemoLog function allows the user to log calibration data from various Memosens measuring points, which can then be easily transferred to a computer via the standard USB connection. The Paraly SW 112 software enables user-friendly management of all recorded data
  • A sensor quiver protects the sensor from damage and drying out
  • The high-performance polymer housing ensures low water absorption and high impact resistance
  • Over 1000 hours of measurement with a single set of batteries (4 x AA)
  • Data logger with 5000 values
  • The mineral glass display is perfectly readable even after years
  • The world's only portable device for liquid analysis in hazardous locations

Specifications
pH/mV input (analogue): pH: mV:
-2 to 16 (0.01) -1300 to 1300 (1% meas. val.,0.3mV/K)
Temperature input: Temperature with NTC 30 kO: Temperature with Pt 1000:
-20 to +120°C (0.2K) -40 to +250°C (0.2K)
Memosens input (ISFET): pH: mV: Temperature range:
-2.000 to +16.000 (0.01) -2000 to +2000 (1% meas. val.,0.3mV/K) -50 to +250°C (0,2K)
Memosens input, Redox: mV: Temperature range:
-2000 to +2000 (1% meas. val.,0.3mV/K) -50 to +250 °C (0.2K)
Conductivity measuring range:
0.001µS/cm (c0.05cm-1) 0.01µS/cm (c=0.05 to 0.2cm-1) 0.1µS/cm (c0.2cm-1)
TDS: Salinity: Resistivity: Concentration:
0 to 1999mg/l 0.0 to 45.0g/kg 00.00 to 99.99MO x cm 0.00 to 9.99 (w/w) %
Conductivity input, Memosens: Measuring range Sensor SE 215 MS:
10µS/cm to 20mS/cm
Conductivity input: Temperature compensation: nLF:
Linear 0 to 20%/K, ref. temp. adjustable 0 to 120 °C
Memosens input, oxygen (optical): Saturation: Concentration:
0.000 to 1000.0% 000µg/l to 100.00mg/l
Partial pressure: Temperature measuring range:
0.0 to 2000mbar -20 to+150°C
Power supply: IP code acc. to DIN EN 60529:
4 x AA IP66/67 with pressure compensation
Type: 904 X Multi