Quick delivery
Nabertherm GmbH
High-temperature chamber furnaces with SiC rod heating LHTC/LHTCT 03/14 - 08/16 series | Type/Controller: LHTCT 08/16/C550*
Article number: 9764588
Product information "High-temperature chamber furnaces with SiC rod heating LHTC/LHTCT 03/14 - 08/16 series | Type/Controller: LHTCT 08/16/C550*"
These powerful laboratory muffle furnaces are available for temperatures up to 1400 °C, 1500 °C, 1550 °C or 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces the all-rounders in the laboratory. Heating times of 40 minutes to 1400 °C can be achieved, depending on the furnace
model and the conditions of use.
Option:
* 220-240 V 1/N/PE 50/60 Hz connector as standard. Height plus max. 240 mm for the open LHTCT models.
External dimensions vary for versions with additional equipment. Dimensions on request.
model and the conditions of use.
- Tmax 1400 °C, 1500 °C, 1550 °C or 1600 °C
- Working Temperature 1500 °C (for models LHTC ../16), increased wear and tear of heating elements must be expected in case of working at higher temperatures
- Insulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2
- Housing made of sheets of textured stainless steel
- Dual shell housing for low external temperatures and high stability
- Furnace room lined with durable fiber material, not classified
- Optional flap door (LHTC) which can be used as work platform or lift door (LHTCT) with hot surface facing away from the operator (HTCT 01/ only with lift door)
- Switching system with solid-state-relays, power tuned to the SiC rods
- Controller is the programmable C 550 with adjustable ramps and holding times
- Easy replacement of heating rods
- Adjustable air inlet opening, exhaust air opening in the roof
- 400 V 3/N/PE 50/60 Hz connector as standard
Option:
- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
- Square saggar for charging of up to three layers
- Lid for top saggar
- Manual or automatic gas supply system
- Process control and documentation via VCD software package for monitoring, documentation and control
* 220-240 V 1/N/PE 50/60 Hz connector as standard. Height plus max. 240 mm for the open LHTCT models.
External dimensions vary for versions with additional equipment. Dimensions on request.
| Capacity litres: | 8.0 |
|---|---|
| External dimensions (W x D x H) mm: | 490 x 625 x 540 |
| Internal dimensions (W x D x H) mm: | 170 x 290 x 170 |
| Rating kW: | 13.0 |
| Temp. max. °C: | 1600 |
| Type/Controller: | LHTCT 08/16/C550* |