Bürkle GmbH

Thick walled, robust storage bottles with sturdy carrying handle for safe transport and storage. The storage bottles can also be used as aspirator carboys. Via a threaded connector, a stopcock or other accessories with an inner thread / cap nut of 3/4" can be attached.Printed with blue litre graduation Food safe

For liquids, powders and granules such as tablets, capsules, dyes and other samples.Screw lid PP, blackWith seal made of PE

Sturdy bottle with wide-necked opening and screw cap. Particularly suitable for viscous media, powder, granules and pastes. Leakproof. Individual customer-specific printing possible.

The stand for sedimentation funnels is used to keep, hold or store Imhoff funnels safely and reliably during sedimentation. Two funnel holders ensure that Imhoff funnels will be held safely and securely and can be placed in an absolutely vertical position. Stand with two holders for sedimentation funnels, suitable for funnels 90 mm or more in diameter. Thanks to an innovative magnet concept no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand. With the corresponding accessory the holders for Imhoff funnels can also be replaced by holders for all-purpose funnels.PP, chrome-plated steelAdjustable height up to 450 mmFor funnels with Ø 90 mm or more

Burette according to Dr. Schilling with splinter protection, with Schellbach stripes, automatic zero point extraction and Bürkle dosing device. The glass burette is covered with a plastic sheet which increases the tensile strength and serves as splinter protection. The probability that the burette breaks is reduced compared to conventional burettes and even in case the burette breaks, no dangerous splinters will be produced. The dosing device allows precise dosage via the pushbutton or via the micro-screw as well as precise dispensing via a fine spout tip.With splinter protectionAdjusted to ExShatterproof, resistant to chemicalsExact spout tip, fine droplet formationParts in contact with the medium: PE, natural rubber, PP, Borosilicate glass

White. Without residues, free of undercuts, sterilisable.

Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPFor small containers, up to 10 lUniversal bungs made of soft PVC, for container openings of 20 – 36 mmFor weak acids, alkalis and detergents

Transparent with stopcock. Simple to use, suitable for occasional dispensing of non-aggressive liquids from a higher drum to a lower vessel, following the siphoning principle.

The stable rods are individually placed into the holes of the draining rack and are clicked into place. Their positions can be changed at any time.Scope of supply:Draining rack incl. wall mounting set (screws, dowels), removable drain channel incl. drainage connection and drain tube

White. For transport, packaging and storage of foodstuffs, building materials and non-corrosive chemicals.Air-tight closureComplete with hermetically sealing lidFood-safe

White, unbreakable, chemically resistant.For 2 or 4 funnels. Robust, heavy base provides good stability. Variable height adjustment up to 450 mm. Thanks to a magnet system, no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand.With 2 or 4 aperture reduction inserts for small funnels. Suitable for funnels with diam. 40 to 180 mm.

Space-saving StopCock set: 1 Flachmann LaboPlast® canister 5 l or 10 l with screw neck and 1 stopcock (9.139 997).

White multi-purpose trays. Injection-moulded. Durable and resist flexing, with strong, rounded rim. Stackable and hygienic. Surface is easy-to-clean. Resistant to many acids and alkaline solutions. Food-safe. Temperature resistant up to 60 °C.

Chemical resistant to a large extend. Trigger-action spray pump with continuously adjustable spray nozzle.Parts in contact with media made of PP, PE and stainless steelNozzle diameter 0.6mm; nozzle is continuously adjustableAmount sprayed per stroke: 1.2ml ±0.1ml

The pressure sprayer is ideal to spray a wide range of liquids uniformly. The pressurised spray has a working pressure of 4 bar. Extension for spray lance 30 cm available as accessory.Wetted parts PE, PP, glass-fibre reinforced PA, V2A, FKMBottle made of HDPEWith short spray nozzleLeft-handed and right-handed pistol controlAdjustable spray jetGraduation up to 1500 mlTemperature max. 30 °C

Transparent. For safe filling of containers. Food safe.