Vacuubrand GmbH & Co.KG

Fully equipped two-point vacuum controller with capacitive, gas type-independent absolute pressure measurement using an alumina-ceramic diaphragm. Ready to use due to standard laboratory connections.Scope of supply: Vacuum controller VACUU·SELECT® with chemistry suction line valve, check valve, integrated ceramic vacuum sensor, venting valve and power supply.Fully equipped two-point vacuum controller with capacitive, gas type-independent absolute pressure measurement using an alumina-ceramic diaphragm. Ready to use due to standard laboratory connections.Scope of supply: Vacuum controller VACUU·SELECT® with chemistry suction line valve, check valve, integrated ceramic vacuum sensor, venting valve and power supply.

The combination of speed controlled VARIO® chemistry diaphragm pumps and the new VACUU·SELECT vacuum controller makes the VARIO® select chemistry pumps the ideal solution for chemical processes that require precise vacuum, such as rotary evaporation, vacuum drying or vacuum concentration.High chemical resistance and therefore ideally suited for pumping aggressive gases and vapoursShort process times and smooth running due to optimal setting of the pressure via the VACUU·SELECT controllerThe VARIO® technology controls the vacuum precisely and efficiently via motor speedPower consumption, maintenance and noise are exceptionally lowThe outlet catchpot and solvent condenser combine to prevent solvent vapor emissions into the lab, allowing for nearly full recovery of solventsCountry-specific power cord versions available on request.

The packages enable convenient vacuum control in the fine vacuum range from 5 mbar down to 10-3 mbar and consist of a VACUU·SELECT vacuum controller, a VSP 3000 vacuum sensor, VV-B 15C solenoid-operated valve and all necessary small flange components. Measurement principle: Thermal conductivity (Pirani), chemically resistant plastics/ceramics.The packages enable convenient vacuum control in the fine vacuum range from 5 mbar down to 10-3 mbar and consist of a VACUU·SELECT vacuum controller, a VSP 3000 vacuum sensor, VV-B 15C solenoid-operated valve and all necessary small flange components. Measurement principle: Thermal conductivity (Pirani), chemically resistant plastics/ceramics.

Dieser Pumpstand bietet ein bewährtes Konzept der Vakuumerzeugung und -regelung für viele Verdampfungsprozesse. Der saugseitige Abscheider aus Glas mit Schutzbeschichtung hält Partikel und Tröpfchen zurück. Der druckseitige Emissionskondensator ermöglicht die nahezu hundertprozentige Rückgewinnung von Lösemitteln.Vakuum-Controller VACUU·SELECT mit grafischer BedienoberflächeVordefinierte Anwendungen ersparen Zeit und bringen reproduzierbare ErgebnisseAnwendungseditor ermöglicht eigene ProzessabläufeGute Chemikalien- und KondensatverträglichkeitÖlfrei

Powerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interfaceThe chemical-resistant version VACUU·PURE® 10C is protected against corrosion due to chemically resistant polymers on all wetted parts. A thick-walled PEEK encapsulation protects the spindles and stator inside the pumping chamber, providing high chemical resistance. An integrated sealing gas supply prevents the bearings from chemical attack. Due to the design-related high condensate compatibility, no gas ballast is required, even with high vapor loads.

The combination of speed controlled VARIO® chemistry diaphragm pumps and the new VACUU·SELECT vacuum controller makes the VARIO® select chemistry pumps the ideal solution for chemical processes that require precise vacuum, such as rotary evaporation, vacuum drying or vacuum concentration.High chemical resistance and therefore ideally suited for pumping aggressive gases and vapoursShort process times and smooth running due to optimal setting of the pressure via the VACUU·SELECT controllerThe VARIO® technology controls the vacuum precisely and efficiently via motor speedPower consumption, maintenance and noise are exceptionally lowThe outlet catchpot and solvent condenser combine to prevent solvent vapor emissions into the lab, allowing for nearly full recovery of solventsCountry-specific power cord versions available on request.

The powerful rotary vane pumps are ideal for laboratory and process applications that require a very good ultimate vacuum at medium to increased gas flow rate. Typical applications are lyophilisation, fine vacuum distillation, and drying chambers.High flow rate even at vacuum levels approaching ultimate vacuumHigh water vapor tolerance due to efficient gas ballastVery good ultimate vacuum even with gas ballastVacuum-tight at switch-off without suction nozzle valveLong oil change intervals due to large usable oil volumeEasy maintenance due to telescopic designScope of supply: Rotary vane pump, oil mist filter FO, butterfly valve VS 16, manual

The powerful rotary vane pumps are ideal for laboratory and process applications that require a very good ultimate vacuum at medium to increased gas flow rate. Typical applications are lyophilisation, fine vacuum distillation, and drying chambers.High flow rate even at vacuum levels approaching ultimate vacuumHigh water vapor tolerance due to efficient gas ballastVery good ultimate vacuum even with gas ballastVacuum-tight at switch-off without suction nozzle valveLong oil change intervals due to large usable oil volumeEasy maintenance due to telescopic designScope of supply: Rotary vane pump, manual

In explosionsgefährdeten Bereichen dürfen ausschließlich Betriebsmittel mit ATEX-Konformität eingesetzt werden. Diese Chemie-Membranpumpen mit der Gerätekategorie 2 (z.B. für Zone 1) bieten alle Vorteile ölfreier Chemie-Membranpumpen. Typische Anwendungen sind ATEX-Rotationsverdampfer und -Trockenschränke in explosionsgefährdeten Bereichen. Die ATEX-Zulassung umfasst sowohl das Innere der Pumpen (gepumpte Gase und Dämpfe), als auch die Umgebung der Pumpe (Aufstellungsort).Hervorragende Chemikalien- und KondensatverträglichkeitWeitgehend aus antistatischen MaterialienDruckgekapselter Motor mit integriertem, selbsthaltendem Überstrom- und Übertemperaturschutz für direkten 230 V / 50 Hz EinphasenanschlussÜberdruckventile intern und am AuslassMit Gasballasteinrichtung als getrennter InertgasanschlussSicherheitsmembrantechnik mit Möglichkeit zur Inertgasspülung und Membranriss-DetektionATEX-Konformität:Schöpfraum (gepumpte Gase): II 2G Ex h IIC T3 Gb XAußenraum (Umgebung der Pumpe): II 2G Ex h IIB T4 Gb X (mit Inertgasspülung) / II 3G Ex h IIB T4 Gc X (ohne Inertgasspülung)

The combined rough and fine vacuum gauge VACUU·VIEW extended works in the enhanced range from atmosphere down to 10-3 mbar. The chemically resistant combination of ceramic diaphragm sensor and ceramic jacketed Pirani sensor ensures reliable and precise measurements. The illuminated display enables comfortable reading.Compact design with integrated sensors for useful setup in laboratory and processChemically resistant, heavy duty vacuum sensors, highly reliable at harsh laboratory conditions even in case of very aggressive chemicalsHigh repeatability and long-term accuracy under all typical conditions reliable and repeatable resultsDisplay with menu driven handling, easy to use e.g. for unit settingsCompatible to gauge DCP 3000 and controller CVC 3000 or VACUU·SELECTThe product is delivered ready for use

Hohes Saugvermögen und Endvakuum. Für weites Einsatzgebiet im Labor und industriellen Betrieb bei korrosiven GasenKompromisslose Chemie-Ausführung durch Einsatz optimal chemikalienbeständiger FluorkunststoffeLange Membranlebensdauer durch PTFE-Sandwichdesign und optimale Radialfixierung der MembranWartungsfreundlich. Getrennter Membran- und Ventilwechsel durch neuartige Ventilinseln (patentiert). Einfache Demontage, Reinigung und zuverlässige Wiedermontage ohne NacheinstellungBesonders leise und laufruhig durch kompakten Antrieb mit patentiertem "fliegendem Motor". Ideal für den Einbau in empfindliche Geräte für Labor und IndustrieLeicht zu reinigen durch glatte OberflächenHohe Dampfverträglichkeit durch integrierte Chemieverschaltung und Gasballasteinrichtung

The diaphragm pumps ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are the perfect partner for both single and multiple filtrations.One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.In the chemistry diaphragm pumps ("C") all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE).An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum.Gas ballast for reliable pump performance.Two up to four stage chemistry diaphragm pumps (letters in the product name Z, D or V) are equipped with a manual gas ballast valve as standard. The supply of gas ballast minimizes the risk of condensation inside the pump.The diaphragm pumps ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are the perfect partner for both single and multiple filtrations.One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.In the chemistry diaphragm pumps ("C") all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE).An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum.Gas ballast for reliable pump performance.Two up to four stage chemistry diaphragm pumps (letters in the product name Z, D or V) are equipped with a manual gas ballast valve as standard. The supply of gas ballast minimizes the risk of condensation inside the pump.Diaphragm pumps ATEX-models available on request. Country-specific power cord versions available on request.

Standard pump oil. High viscosity, low vapour pressure, good chemical resistance.Hazardous Substance DataSDSLink

The BioChem-VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants with a powerful and long-lasting chemistry diaphragm pump, which is automatically turned on and off as needed.Extremely compact, space saving and low noise and thus the ideal tool in the workplaceEasy operation due to electronically adjustable suction power via touch panel, for strong or sensitive suction and reproducible operationAutoclavable collection bottle designed to reduce aerosol- and foam formationAspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube, mechanics is not in contact with mediaHighly reduced contamination risks for the vacuum pumping system due to hydrophobic 0.2 µm sterilisable filterReady to accept a second aspiration hand controller (optional)The BioChem-VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants with a powerful and long-lasting chemistry diaphragm pump, which is automatically turned on and off as needed.Extremely compact, space saving and low noise and thus the ideal tool in the workplaceEasy operation due to electronically adjustable suction power via touch panel, for strong or sensitive suction and reproducible operationAutoclavable collection bottle designed to reduce aerosol- and foam formationAspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube, mechanics is not in contact with mediaHighly reduced contamination risks for the vacuum pumping system due to hydrophobic 0.2 µm sterilisable filterReady to accept a second aspiration hand controller (optional)

Stainless steel/FPM (e.g. Viton®). For Type KF small flange.

Flanged tubing nozzles. For Type KF small flange.

Flanged at both ends. For Type KF small flange.