Capacity ml:
1000
|
Manufacturer Article Number:
ESS01
|
Type:
Storage solution
|
UNSPSC:
41-11-61-05
Cleaning, rinse, regeneration and storage solution. Designed to extend the useful life of pH electrodes.Cleaning, rinse, regeneration and storage solution. Designed to extend the useful life of pH electrodes.Hazardous Substance DataSDSLink
Variants from €28.91*
Manufacturer Article Number:
0105500
|
Material:
SAN
|
Nominal capacity:
1000 ml
|
Standard:
DIN 12672
|
Type of closure:
Screw cap
|
With stopcock:
No
Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.Graduations, ml:Subdivisions, ml0 to 20.12 to 100.510 to 1001.5100 to 30010300 to 100050
Manufacturer Article Number:
06460108
|
Measuring range °C:
37 ... 65
Strips for 8 temperatures. 5 types cover the measuring range 37 to 260 °C, each strip displays 8 different temperatures. Each strip measures 50 x 18 mm.
Battery/rechargeable battery:
4 x 1.5 V, AA
|
Conductivity:
0,001 µS/cm ... 1000 mS/cm
|
Conductivity accuracy:
±0.5 %
|
Conductivity resolution:
0,001 µS/0,01 µS/0,1 µS/1 µS/0,01 mS/0,1 mS/1 mS
|
Depth:
180 mm
|
Designation ANSI:
AA
|
Dimensions (WxDxH):
80 x 180 x 55 mm
|
Height:
55 mm
|
IP code:
IP 67
|
Interfaces:
USB
|
Manufacturer Article Number:
2CA301
|
Max. voltage battery/rechargeable battery:
1.5 V
|
No. of batteries/rechargeable batteries:
4
|
Salinity:
0 ... 70
|
Salinity resolution:
0.1
|
TDS accuracy:
±0,5 %
|
TDS range:
0 ... 1999 mg/l/0,01 ... 199,9 g/l
|
TDS resolution:
1 mg/l/0,01 g/l/0,1 g/l
|
Temperature:
-5.0 ... 105.0 °C
|
Temperature accuracy:
±0.1 °C
|
Temperature resolution:
0.1 °C
|
Type:
Cond 3310 Set 1
|
Type of auxiliary energy:
Battery/rechargeable battery
|
UNSPSC:
41-00-00-00
|
Width:
80 mm
Komfortables und vielseitiges Leitfähigkeitsmessgerät mit eingebautem zeitgesteuerten Datenlogger und Messwertspeicher für 5000 GLP-konforme Einträge für ausgedehnte Datensammlungen. Mit hinterleuchtetem Graphikdisplay und menügesteuerter Bedienung für ein Plus an Komfort und Sicherheit. Wasserdicht und robust. Für die Messung von Leitfähigkeit, spez. Widerstand, Salinität und TDS. Große Auswahl an anschließbaren Messzellen, erweiterte Zellkonstantenauswahl, automatische und manueller Temperaturkompensation (auch abschaltbar) mit linearer sowie nichtlinearer Funktion für Reinstwasser und natürliche Wasser nach EN 27 888.Lieferumfang: Konduktometer, Tragekoffer, Leitfähigkeits-Messzelle TetraCon® 325, Leitfähigkeitsstandard 1413 µS/cm bei 25 °C, Stativ, Becher, Kurzbedienungsanleitung, CD-ROM, Batterien, Software, USB-Kabel
Cable length:
3 m
|
Cell constant:
0.475 1/cm
|
Conductivity:
1 µS/cm ... 2 S/cm
|
Connection plug:
Digital
|
Manufacturer Article Number:
301711
|
Material shaft:
Epoxy
|
Max. pressure:
2.5 bar
|
Max. temperature:
100 °C
|
Min. temperature:
0 °C
|
Shaft length:
120 mm
|
Shaft Ø:
15.3 mm
|
Temperature:
0 ... 100 °C
|
Temperature sensor:
NTC 30 kOhm
|
Type:
TetraCon® 925-3
For connection to WTW IDS measuring instruments.IDS conductivity cell probe TetraCon® 925:Intelligent digital 4-pole cell with integral temperature sensor. Automatical transfer of the cell constant. Cable length 1.5 metres. Measuring range: 1µS/cm to 2S/cm.TetraCon® 925-3:Like TetraCon® 925, but cable length 3 mIDS conductivity cell probe TetraCon® 925/LV:Intelligent digital 4-pole cell with integral temperature sensor. Fork design, suitable for small volumes (at least 2.5ml) as well as for viscous samples. Automatical transfer of the cell constant. Cable length 1.5 metres. Measuring range: 1µS/cm to 2S/cm.IDS conductivity cell probe LR 925/01:Intelligent digital 2-pole cell with integral temperature sensor and flowthrough cell D 01/T for measuring of low conductivity values (
Variants from €620.00*
Depth:
300 mm
|
Dimensions (WxDxH):
150 x 300 x 294 mm
|
Height:
294 mm
|
Manufacturer Article Number:
0105600
|
No. of sedimentation cones:
2
|
Width:
150 mm
Acrylic/PP. To hold two Imhoff sedimentation cones. Compact and easy to transport even when fully loaded.
25%
Accuracy temperature:
±0.1 °C
|
Accuracy temperature Number:
0.1 °C
|
Battery/rechargeable battery:
4 x AA
|
Designation ANSI:
AA
|
IP code:
IP 67
|
Manufacturer Article Number:
2AA112
|
Max. temperature:
105 °C
|
Min. temperature:
-5 °C
|
No. of batteries/rechargeable batteries:
4
|
Temperature:
-5 ... 105 °C
|
Type:
pH 3110 Set 2
|
Type of auxiliary energy:
Battery/rechargeable battery
|
UNSPSC:
56-12-20-01
|
mV range:
±1200,0/±2000
|
mV range accuracy:
±0,3 (±1200,0)/±1 (±2000)
|
pH range:
-2,000 ... 19,999
|
pH range accuracy:
±0.1/±0.01/±0.005
|
pH range resolution:
0.1/0.01/0.001
Die WTW pH/mV Taschenmessgeräte der ProfiLine Serie sind robust und wasserdicht nach IP 67. Einfaches und funktionales pH/mV (Redox-)-Messgerät mit vereinfachter Tastatur zur klaren und sicheren Bedienung. Automatische AutoRead-Funktion für reproduzierbare Messergebnisse. 3-Punkt-Kalibrierung mit WTW Technischen Puffern oder DIN/NIST-Puffern. Die bewährte DIN-Buchse zum Anschluss der pH-Elektroden erlaubt problemlose pH-Messung in nasser Umgebung. Die Geräte können mit Batterien oder Akkus betrieben werden.Lieferumfang: pH-/Redox-Messgerät, Koffer, pH-Sensor SenTix® 41, Pufferlösung STP 4 und STP 7, 3 mol/l KCl, Stativ, Becher, Kurzbedienungsanleitung, CD-ROM, Batterien
Accuracy temperature ± °C:
0.5
|
Depth mm:
69
|
Height mm:
5
|
Manufacturer Article Number:
5005-0072
|
Measuring range temperature °C:
60
|
Protection class:
IP67
|
Range start temperature °C:
-30
|
Resolution temperature °C:
0.1
|
Storage readings:
10000
|
Type:
TempLOG TS60
|
Weight kg:
0.01
|
Width mm:
33
Ideal for low-cost temperature monitoring of transports. For evaluation, the data logger is connected to the USB interface and a PDF report is generated automatically. No hardware or software necessary.Auto generating PDF format data report60 days runtime10000 measurements every 10 minutesChange of configuration (alarm, interval ...) on requestIntegrated USB connectorStart by buttonLED Alarm displaySerial number stickerInclusive certificateFood-safe according to HACCPCompliant to EN12830 S,T,C,D,1 and GDPTemperature range:-30 ... 60 °CAccuracy:±0.5 °C at -20 °C ... 40 °C / ±1.0 °C in remaining rangeResolution:0.1 °CData memory:10000 measurementsRecording cycle:60 daysSampling interval:10 minutesShelf life:24 monthsDimensions (L x W x H):69 x 33 x 5 mmWeight:10 gIP code:IP67
Anzahl Messpositionen:
12
|
Messzeit:
7 d
|
Battery/rechargeable battery:
1 x CR2450
|
Designation IEC:
CR2450
|
GHS:
GHS05
|
Manufacturer Article Number:
208262
|
Max. measured value:
4000 mg/l
|
Max. pressure:
1250 hPa
|
Max. voltage:
240 V
|
Measured range:
0 ... 4,000 mg/l
|
Min. measured value:
0 mg/l
|
Min. pressure:
500 hPa
|
Min. voltage:
100 V
|
No. of batteries/rechargeable batteries:
1
|
Plug type:
Universal
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Pressure:
500 ... 1,250 hPa
|
Type:
OxiTop®-i IS 12
|
Type of auxiliary energy:
Battery/mains connection
Easy-to-use, respirometric measuring system for determining the biological oxygen demand (BOD). The method is based on changes of pressure in a closed system using measuring heads attached to the sample bottles. The BOD can be determined simultaneously in up to 6 or 12 samples.No dilution of the sample requiredDirect reading of the BOD, the time course and the intermediate values on the graphical display of the measuring headsInput of the used sample volume directly at the measuring headMonitoring time between 1 and 7 daysPermanent display of the current status at each measuring headColoured measuring heads with adjustable, numerical sample identificationScope of supply: OxiTop®-i IS 6: 6 x measuring heads (3 x blue, 3 x grey), 6 x sample bottles PF600, 6 x rubber quivers, overflow measurement flasks, 6 x stirring rods, stirring rod remover, stirring platform SI 6OxiTop®-i IS 12: 12 x measuring heads (6 x blue, 6 x grey), 12 x sample bottles PF600, 12 x rubber quivers, overflow measurement flasks, 12 x stirring rods, stirring rod remover, stirring platform SI 12An incubator is required to operate the OxiTop®-i IS. Please order separately.SpecificationsPressure range:500 ... 1250 hPaBOD range:0 ... 4000 mg/lDisplay:Graphical LCD, background-illuminatedPower supply of measuring heads:
Power supply of stirring platform:1 x CR 2450
100 ... 240 V, 50/60 HzEasy-to-use, respirometric measuring system for determining the biological oxygen demand (BOD). The method is based on changes of pressure in a closed system using measuring heads attached to the sample bottles. The BOD can be determined simultaneously in up to 6 or 12 samples.No dilution of the sample requiredDirect reading of the BOD, the time course and the intermediate values on the graphical display of the measuring headsInput of the used sample volume directly at the measuring headMonitoring time between 1 and 7 daysPermanent display of the current status at each measuring headColoured measuring heads with adjustable, numerical sample identificationScope of supply: OxiTop®-i IS 6: 6 x measuring heads (3 x blue, 3 x grey), 6 x sample bottles PF600, 6 x rubber quivers, overflow measurement flasks, 6 x stirring rods, stirring rod remover, stirring platform SI 6OxiTop®-i IS 12: 12 x measuring heads (6 x blue, 6 x grey), 12 x sample bottles PF600, 12 x rubber quivers, overflow measurement flasks, 12 x stirring rods, stirring rod remover, stirring platform SI 12An incubator is required to operate the OxiTop®-i IS. Please order separately.Hazardous Substance DataGHSH-SatzH290, H314P-SatzP280, P301+P330+P331, P305+P351+P338
Variants from €3,161.00*
For:
NS14/23
|
Manufacturer Article Number:
05605500
|
Material:
Stainless steel
Stainless steel, nickel-plated. For securing the NS stopper.
20%
Depth:
161 mm
|
Dimensions (WxDxH):
197 x 161 x 70 mm
|
Height:
70 mm
|
IP code:
IP 54
|
Manufacturer Article Number:
1FD760
|
Type:
MultiLab® Pro 20 IDS
|
Type of auxiliary energy:
Mains connection
|
Width:
197 mm
Digitales Multiparameter Messgerät mit 2 galvanisch getrennten Messkanälen für pH, Redox, mV, Leitfähigkeits-, Sauerstoff-, ISE- und Trübungsmessungen. Damit können bis zu 2 gleiche oder unterschiedliche Parameter simultan gemessen werden. Ideal für anspruchsvolle Aufgaben, auch in kritischen (GxP) Bereichen. Das brilliante 7" Touchdisplay mit Spezial-Touchscreen-Glas ist alkohol- und desinfektionsmittelbeständig und kann mit Handschuhen bedient werden. Vordefinierte Methoden, automatische Dokumentation, Metadaten-Sicherung und eine Onboard-Anleitung erleichtern die Handhabung und optimieren den Workflow.Funkvorbereitet für Intelligente Digitale Sensoren (IDS)Digitale SensorerkennungKabelgebundener oder drahtloser Sensoranschluss möglichVoreingestellte und definierbare PuffersätzeQSC-KalibrierungAutoRead-FunktionLIMS ready: einfache Einbindung in bestehende LIMS-SystemeGespeicherte Metadaten werden sicher über das LAN-Netzwerk transferiertDatenexport auch als PDF/A, JSON und csvSchnittstellen: 2 x USB-A und 1 x EthernetGxP-konformLieferumfang: Multiparameter Messgerät, Stativ, Universalnetzteil
20%
Depth:
161 mm
|
Dimensions (WxDxH):
197 x 161 x 70 mm
|
Height:
70 mm
|
IP code:
IP 54
|
Manufacturer Article Number:
1FD780
|
Type:
MultiLab® Pro 40 IDS
|
Type of auxiliary energy:
Mains connection
|
Width:
197 mm
Digitales Multiparameter Messgerät mit 4 galvanisch getrennten Messkanälen für pH, Redox, mV, Leitfähigkeits-, Sauerstoff-, ISE- und Trübungsmessungen. Damit können bis zu 4 gleiche oder unterschiedliche Parameter simultan gemessen werden. Ideal für anspruchsvolle Aufgaben, auch in kritischen (GxP) Bereichen. Das brilliante 7" Touchdisplay mit Spezial-Touchscreen-Glas ist alkohol- und desinfektionsmittelbeständig und kann mit Handschuhen bedient werden. Vordefinierte Methoden, automatische Dokumentation, Metadaten-Sicherung und eine Onboard-Anleitung erleichtern die Handhabung und optimieren den Workflow.Funkvorbereitet für Intelligente Digitale Sensoren (IDS)Digitale SensorerkennungKabelgebundener oder drahtloser Sensoranschluss möglichVoreingestellte und definierbare PuffersätzeQSC-KalibrierungAutoRead-FunktionLIMS ready: einfache Einbindung in bestehende LIMS-SystemeGespeicherte Metadaten werden sicher über das LAN-Netzwerk transferiertDatenexport auch als PDF/A, JSON und csvSchnittstellen: 2 x USB-A und 1 x EthernetGxP-konformLieferumfang: Multiparameter Messgerät, Stativ, Universalnetzteil
Ground size:
NS14/23
|
Manufacturer Article Number:
604 0100
|
Material:
Soda-lime glass
|
Nominal capacity:
100 ml
Winkler pattern. Soda-lime glass.For determination of dissolved oxygen in water. The measured capacity is specified to ± 0,01ml. With white labelling area. Solid, bevelled glass stopper, secured with an accessory spring clip. Each bottle is adjusted to the relevant stopper. Stoppers and bottles are therefore not interchangeable. Each bottle and its stopper is marked with a unique, matching identification number.
Depth:
180 mm
|
Description:
2 channels, meter only
|
Dimensions (WxDxH):
80 x 180 x 55 mm
|
Height:
55 mm
|
IP code:
IP 67
|
Interfaces:
USB-A, Mini USB-B
|
Manufacturer Article Number:
2FD560
|
Max. voltage:
240 V
|
Min. voltage:
100 V
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
Multi 3620
|
Type:
Multi 3620
|
Type of auxiliary energy:
Mains connection/rechargeable battery
|
Width:
80 mm
Professional digital multiparameter meters for mobile measurement, with 3, 2 or 1 universal measurement channels, wireless preparation, colour graphic display (black/white display for Multi 3510), data logger manually or automatically (timed) and 2 (1 for Multi 3510) waterproof USB interfaces suitable for field use. Easy to clean with a soft brush under water jet.Multi 3630: The Multi 3630 IDS with three universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to cable or wireless. Documentation of meter and sensor data. User control over MultiLab® users. With USB-A and Mini USB-B interface and colour display.Multi 3620: The Multi 3620 IDS with two universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to a cable or wireless. Documentation of meter and sensor data. User control over MultiLab® users. With USB-A and Mini USB-B interface and colour display.Multi 3510: Sequential multi-parameter measurement. All WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors can be connected to the universal channel, either with cable or wireless module. Data transfer to PC with MultiLab® Importer. With Mini USB-B interface and black/white display.Multi 3620 IDS: Single meter in a carrying case with Quick Start Guide, CD-ROM and batteries, driver software for USB, cable, power supplyMulti 3620 IDS SET C: Meter in a carrying case with IDS sensors (digital pH sensor SenTix® 940, digital conductivity cell TetraCon® 925), QSC Kit, buffer 4 and 7, conductivity standard, stand, beaker, CD-ROM, batteries, cables, power supply, arming SM ProMulti 3620 IDS SET G: Meter in a large carrying case with IDS sensors (digital pH sensor SenTix® 940-3, optical sensor FDO® 925-3, digital conductivity cell TetraCon® 925-3), QSC Kit, stand, beaker buffer 4 and 7, conductivity standard, CD-ROM, batteries, cable, power supply , arming SM ProSpecificationsMeasuring range:depending on IDS sensorMemory Multi 3510 IDS:manual: 500 data records
automatic: 4500 data recordsMemory Multi 3630 IDS / Multi 3620 IDS:manual: 500 data records
automatic: 10,000 data recordsDimensions (W x D x H):approx. 180 x 80 x 55 mmWeight:400 gPower supply Multi 3510 IDS:4 alkaline batteries, USBPower supply Multi 3630 IDS / Multi 3620 IDS:PSU with charging function, 4 NiMH batteries (AA type), USBIP code:IP 67
Adjusting program:
External
|
Depth:
292 mm
|
Depth weighing plate:
118 mm
|
Dimensions (WxDxH):
218 x 292 x 80 mm
|
Height:
80 mm
|
Linearity:
±0,002 g
|
Manufacturer Article Number:
BML-300D3
|
Max. load:
300 g
|
Readability:
0,001 g
|
Type:
BML-300D3
|
Type of auxiliary energy:
Mains connection/rechargeable battery
|
Weighing plate (WxD):
Ø 118 mm
|
Weight:
2 kg
|
Width:
218 mm
|
With draft shield:
Yes
Sturdy balances ideal for routine tasks in terms of fast stabilisation and accurate repeatable results as well as the large high contrast LCD display.Model BML-300D3 with low draft shield for quick and easy loading from aboveModel BML-500D3 with high draft shield with 3 sliding doors for easy accessLarge, backlit LCD display, digit height 22 mmEasy navigation through direct access to the different functionsComfortable formulation / documentation with separate tara print-buttonStable temperature behaviorSafe results through external calibrationOperation with power supply or integrated batteryWith RS232 interface
Variants from €226.80*
Accuracy humidity ± % r.F.:
5
|
Accuracy temperature ± °C:
1
|
Depth mm:
91.5
|
Height mm:
20
|
Manufacturer Article Number:
5005-0210
|
Measuring range end humidity % r.F.:
100
|
Measuring range temperature °C:
70
|
Range start temperature °C:
-40
|
Resolution humidity % r.F.:
0.1
|
Resolution temperature °C:
0.1
|
Storage readings:
100000
|
Type:
LOG210
|
Type of auxiliary energy:
1 x 3,6 V Lithium AA
|
Weight kg:
0.07
|
Width mm:
42
PDF-data logger with displayMemory size: 100.000 measurementsUsable without software (default settings) (5-minute-interval, without alarm settings)Automatic PDF creationMovement sensor for shock recording e.g.: door or windows closingFree adjustable recording interval: 10 seconds to 24 hoursMax-Min-Display memory (resettable)Time marking functions for measuring resultsBattery lifetime approx. 4 years (recording interval >15 minutes)Status- and Alarm-LEDsIncludes wall mountFree software LogConnect, for configuring (alarms, interval, changing display settings) or LogGraph2 for comfortable graphical and tabular display of measured values, incl. drag and zoom. Software is available as download.SpecificationsTemperatureMeasuring range:-40 to +70 °CAccuracy:0.1 °CPrecision:±0.5 °C (0 to +60 °C), otherwise ±1.0 °CHumidityMeasuring range:0 to 100 % R.H.Resolution:0.1% R.H.Accuracy:±3 % R.H. (40 to 60 %), ±3.5 % R.H. (20 to 40 % and 60 to 80 %), otherwise ±5 % R.H.Interface:
Housing:USB (integr.)
Plastic (ABS)Battery:1 x 3,6 Volt Lithium ½ AADimensions:91.5 x 42 x 20 mmWeight:approx. 70 g
Battery/rechargeable battery:
1 x 1.5 V, AA
|
Colour:
Grey
|
Depth:
74 mm
|
Designation ANSI:
AA
|
Dimensions (WxDxH):
44 x 74 x 115 mm
|
Height:
115 mm
|
Manufacturer Article Number:
30.1017.10
|
Max. temperature:
50 °C
|
Max. voltage battery/rechargeable battery:
1.5 V
|
Min. temperature:
-20 °C
|
No. of batteries/rechargeable batteries:
1
|
Temperature:
-20 ... 50 °C
|
Type of auxiliary energy:
Battery
|
Weight:
110 g
|
Width:
44 mm
Digital thermometer, wall hanging, for indoor or outdoor use. With blue, splash-proof casing, selectable °C/°F ranges and battery.Weight:161 gDimensions (W x D x H):75 x 44 x 115 mm
Manufacturer Article Number:
30.3039.IT
|
Type:
Profi-Thermo-/Hygrometer KlimaLogg Pro
For accurate long-time monitoring and documentation of temperature and humidity. The data is measured by the device, up to 8 additional wireless transmitters can be attached. With alarm function in case of exceeding or falling below the limit values for temperature and humidity.Memory for up to 50000 values, which can be transferred to the PC via a USB transceiver for documentation and evaluationDisplay of maximum and minimum values as well as dew point with date and timeConnector for controlling external devicesFree software for data evaluation available as downloadIntegrated radio-controlled clockCan be placed onto a tabletop or fixed to the wallScope of supply: Thermo-Hygrometer, USB-Transceiver, 3 x AA-Batteries, Operating InstructionsAdditional radio transmitters for measuring temperature and humidity are available separately.SpecificationsTemperature range:0 ... 50 °CTemperature resolution:
Temperature measuring interval:0.1 °C
15 secondsTemperature accuracy:±1 °CHumidity range:1 ... 99 %Humidity resolution:
Humidity measuring interval:1 %
15 secondsHumidity accuracy:±3 % (35 ... 75 % r.H.) / ±5 % (76 ... 99 % r.H.)Transceiver range:
Housing material:Max. 100 m
ABSDimensions (W x D x H):25 x 98 x 137 mmWeight:147 gPower supply:3 x AA 1.5 V
Depth:
325 mm
|
Depth weighing plate:
90 mm
|
Dimensions (WxDxH):
205 x 325 x 305 mm
|
Height:
305 mm
|
Linearity:
±0,3 mg
|
Manufacturer Article Number:
BML-220D4
|
Max. load:
220 g
|
Readability:
0,1 mg
|
Reproducibility:
0,3 mg
|
Type:
BML-220D4
|
Type of auxiliary energy:
Mains connection
|
Weighing plate (WxD):
Ø 90 mm
|
Weight:
6 kg
|
Width:
205 mm
|
With draft shield:
Yes
Sturdy balance ideal for routine tasks in terms of fast stabilisation and accurate repeatable results as well as the large high contrast LCD display.With large draft shield with 3 sliding doors for easy accessLarge, backlit LCD display, digit height 22 mmEasy navigation through direct access to the diferent functionsComfortable formulation / documentation with separate tara print-buttonStable temperature behaviourSafe results through external calibrationOperation with power supplyWith RS232 interface
Depth:
372 mm
|
Dimensions (WxDxH):
351 x 372 x 629 mm
|
Height:
629 mm
|
IP code:
IP 40
|
Interfaces:
RS 232, USB
|
Manufacturer Article Number:
0010013698
|
Max. Viscosity:
6000000 mPa·s
|
Max. speed:
200 1/min
|
Max. torque:
0.0673 mNm
|
Max. voltage:
240 V
|
Min. speed:
0.01 1/min
|
Min. viscosity:
15 mPa·s
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Reproducibility:
0,2 %
|
Speed:
0.01 ... 200 1/min
|
Torque:
0.0673 mNm
|
Type:
ROTAVISC lo-vi HELI Complete
|
Type of auxiliary energy:
Mains connection
|
Viscosity:
15 ... 6,000,000 mPa·s
|
Weight:
7.1 kg
|
Width:
351 mm
For simple or demanding viscosity measurement of low-viscosity liquids in all areas of application, ranging from the laboratory to quality control. The motorized HELISTAND moves the mounted viscometer and its rotating body slowly and uniformly up and down in the sample.Highest measurement accuracyStepless speed adjustment4.3" TFT displayDigital levelSimple ramp functionWith connection for ext. PT100 sensorScope of supply: Viscometers, stand HELISTAND, spindles SP set-1 and T-SP-SET, temperature sensor PT 100.8, protective bracketSpecificationsRotation speed:0.01 ... 200 rpmTemperature range:-100 ... 300 °CAccuracy:1 %Repeatability:0,2 %Stroke max.:142 mmDimensions stand (L x W x H):351 x 372 x 629 mmWeight:7.1 kgPower supply:100 ... 240 V, 50/60 HzProtection class acc. to DIN EN 60529:IP 40
Description:
Netzteil 24 V für LED/Summer-Kombination AL 251
|
Manufacturer Article Number:
1220-0355
Accessories for EBI 25 temperature and humidity data loggers.
Manufacturer Article Number:
03.2265
|
Type:
Micro III
|
UNSPSC:
41103903
Kleinzentrifuge für die Fettbestimmung in Milch und Milchprodukten nach Gerber oder nach Babcock.Mikroprozessorsteuerung mit Ist-Anzeige in Minuten und Sekunden, einstellbar von 1 bis 99 MinutenHeizung, Display mit 2 Segmentanzeigen, einstellbar von 0 bis 65 °CErhöhte Präzision dank geregelter DrehzahlUnwuchtabschaltung bei ungleichmäßiger Befüllung oder plötzlichem GlasbruchInkl. Rotor (Aluminium) und Hülsen (Messing)Kleinzentrifuge für die Fettbestimmung in Milch und Milchprodukten nach Gerber oder nach Babcock.Mikroprozessorsteuerung mit Ist-Anzeige in Minuten und Sekunden, einstellbar von 1 bis 99 MinutenHeizung, Display mit 2 Segmentanzeigen, einstellbar von 0 bis 65 °CErhöhte Präzision dank geregelter DrehzahlUnwuchtabschaltung bei ungleichmäßiger Befüllung oder plötzlichem GlasbruchInkl. Rotor (Aluminium) und Hülsen (Messing)
Depth:
180 mm
|
Description:
2 channels, with SenTix® 940, TetraCon® 925
|
Dimensions (WxDxH):
80 x 180 x 55 mm
|
Height:
55 mm
|
IP code:
IP 67
|
Interfaces:
USB-A, Mini USB-B
|
Manufacturer Article Number:
2FD56C
|
Max. voltage:
240 V
|
Min. voltage:
100 V
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
Multi 3620 SET C
|
Type:
Multi 3620 Set C
|
Type of auxiliary energy:
Mains connection/rechargeable battery
|
Width:
80 mm
Professionelle, digitale Multiparameter-Messgeräte für die mobile Messung, funkvorbereitet, Datenlogger manuell oder automatisch (zeitgesteuert). Leicht zu reinigen mit weicher Bürste unterm Wasserstrahl. Das Multi 3620 IDS mit zwei universellen Messkanälen arbeitet mit allen WTW IDS pH, ORP, Gelöst-Sauerstoff-Sensoren, Leitfähigkeitsmesszellen und Trübungssensoren, egal ob mit Kabel verbunden oder drahtlos über eine Funkverbindung. Dokumentation von Geräte- und Sensordaten. Benutzerverwaltung über MultiLab® User. Mit USB-A und Mini USB-B Anschluss und Farbdisplay.Lieferumfang: Gerät im Tragekoffer mit IDS-Sensoren (digitaler pH-Sensor SenTix® 940, digitale Leitfähigkeitsmesszelle TetraCon® 925), QSC-Kit, Puffer 4 und 7, Leitfähigkeitsstandard, Stativ, Becher, CD-ROM, Akkus, Kabel, Steckernetzgerät, Armierung SM Pro
Anzahl Messpositionen:
1
|
Accuracy:
0.01 ± s
|
Depth:
30 mm
|
Dimensions (WxDxH):
90 x 30 x 515 mm
|
Height:
515 mm
|
IP code:
IP 50
|
Manufacturer Article Number:
285417930
|
Max. measured value:
999.99 s
|
Max. voltage:
230 V
|
Measured range:
999.99 s
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ViscoClock plus M2
|
Type of auxiliary energy:
Mains connection
|
Weight:
450 g
|
Width:
90 mm
Die ViscoClock plus ist ein elektronisches Zeitmessgerät für Glas-Kapillarviskosimeter zur Bestimmung der kinematischen und relativen Viskosität. Der Nachfolger der bewährten ViscoClock bietet jetzt auch die Möglichkeit zur Datenspeicherung und eine erleichterte Handhabung. Die ViscoClock plus ist für folgende Viskosimeter von SI Analytics geeignet: Ubbelohde (DIN; ISO; ASTM; Mikro) und Mikro-Ostwald. Für Absolutmessungen der Viskosität sind Viskosimeter mit Kalibrierung für automatische Messungen zu verwenden. Die ViscoClock plus bestimmt die Durchlaufzeit im Viskosimeter automatisch unter Verwendung von Infrarot-Lichtschranken. Das Viskosimeter mit der Probe wird in die ViscoClock plus eingesetzt und zur Temperierung in ein Thermostatenbad gehängt. Nach erfolgter Temperierung wird die Probe in die Messkugel gepumpt und die Durchlaufzeit automatisch erfasst. Das große Display ermöglicht ein leichtes Ablesen der Messwerte sowie zusätzlicher Informationen: Datum, Uhrzeit, Proben- und Viskosimeter-Identifikationsnummer.Die ViscoClock plus ist in allen SI Analytics Durchsicht-Thermostaten einsetzbar.Lieferumfang: Gerät incl. Durchsichtthermostat CT72/2 für Temperaturen von -40 bis 150 °C
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*