Connection size:
NS 14
|
Manufacturer Article Number:
6261850
|
Material:
Soda-lime glass
With core NS 14. Stopcock for lid tubulation.
Manufacturer Article Number:
0139600
|
UNSPSC:
40151502
Description:
Stopcock for VDC series
|
Description:
Absperrhahn
|
For:
VDC
|
Manufacturer Article Number:
6262107
Variants from €5.00*
Flange int. Ø:
150 mm
|
Height:
190 mm
|
Manufacturer Article Number:
0055000
|
Material:
PP/PC
|
Nominal capacity:
2.15 l
|
Suitable for vacuum:
Yes
|
With stopcock:
Yes
Crystal clear, PC dome lid. PP. Lower section and desiccant tray. Venting stopper with non-return valve in lid. Polychlorbutadiene rubber (CK) O-ring seal between lid and base which is compressed when vacuum is applied. Lightweight and easy to use.
Connection:
Tube connection
|
Manufacturer Article Number:
0139500
|
Material:
PP
|
UNSPSC:
40151502
|
Ultimate pressure:
9804 mbar
This pump will work on pressures up to 10 kg/cm². With built-in, non-return valve to eliminate back flow. Useful for vacuum removal of spilt chemicals, as well as for filter work. Easily dismantled for cleaning. Ø water tube 11.85 mm, Ø vacuum tube 9 mm.
Manufacturer Article Number:
0055100
|
Material:
PP
|
Plate Ø:
141 mm
PP. For use at room temperature. Not suitable for use with hot crucibles.
Manufacturer Article Number:
0055500
|
Material:
Neoprene
|
Ø:
150 mm
Neoprene rubber.
Description:
Plastic knob Ø 52 mm, PP, blue, without hole
|
Manufacturer Article Number:
9180000363
|
UNSPSC:
41-12-18-00
Flange ext. Ø:
171 mm
|
Flange int. Ø:
149 mm
|
Height:
206 mm
|
Manufacturer Article Number:
F42010-0000
|
Material:
PP/PC
|
Plate Ø:
140 mm
|
Suitable for vacuum:
Yes
|
With plate:
Yes
|
With stopcock:
Yes
This lightweight plastic vacuum desiccator holds a full vacuum of 760 mm Hg at room temperature for 24 hours.Polycarbonate lid with large ribbed buttonWhite PP baseIncl. 0.32 cm thick perforated plateConical polypropylene valve with PTFE cone, for hoses with 6.4 - 9.5 mm I.D.With neoprene O-ring, for sealing up to 0 °C without grease
Description:
R 3/8"
|
Manufacturer Article Number:
159665
|
UNSPSC:
41121815
Variants from €4.81*
Autoclavable:
No
|
Colour:
Transparent
|
Height:
330 mm
|
Manufacturer Article Number:
5311-0250
|
Material:
PC
|
Suitable for vacuum:
Yes
|
Type:
5311
|
With plate:
No
|
With stopcock:
Yes
Transparent, lightweight, unbreakable, for vacuum or non-vacuum use. With stopcock. Large, stable base. No danger of implosion. Capable of maintaining 0.95 bar negative pressure over a 24 hour period. With silicone O-ring, no lubrication required. Suitable for 230 mm diameter desiccator discs or plates. Max. height over plate 195 mm. Suitable for vacuum hoses with an inner diameter of 6 to 10 mm.Plate not included.
Colour:
Clear
|
DN:
300
|
Flange ext. Ø:
392 mm
|
Manufacturer Article Number:
632415270300
|
Material:
Boro 3.3
|
Plate Ø:
290 mm
|
UNSPSC:
41-12-30-04
|
With plate:
Yes
Clear glass, with porcelain plate, without vacuum connector.
Variants from €134.80*
DN:
150
|
Flange ext. Ø:
210 mm
|
Manufacturer Article Number:
632415272150
|
Material:
Boro 3.3
|
Plate Ø:
140 mm
|
Suitable for vacuum:
Yes
|
UNSPSC:
41-12-30-04
|
With plate:
Yes
|
With stopcock:
Yes
With porcelain plate. Vacuum-tight. The stopcock has an outer diameter of approx. 9 mm.
Variants from €316.90*
DN:
200
|
Flange ext. Ø:
269 mm
|
Manufacturer Article Number:
632415271200
|
Material:
Boro 3.3
|
Plate Ø:
190 mm
|
Suitable for vacuum:
Yes
|
UNSPSC:
41-12-30-04
|
With plate:
Yes
|
With stopcock:
Yes
With porcelain plate.
Variants from €255.20*
Autoclavable:
Yes
|
Colour:
Blue
|
Height:
262 mm
|
Manufacturer Article Number:
5309-0250
|
Material:
PC
|
Suitable for vacuum:
Yes
|
Type:
5309
|
UNSPSC:
41-12-30-04
|
With stopcock:
No
Transparent PC bell and blue PP lower part. Will not break or implode under vacuum provided that the operating instructions are obeyed. Lower part is resistant to diluted acids, alkalis and other common desiccants. Vacuum connection at lower part. TFE stopcock is suitable for vacuum tubing 6.4mm i.d. For air tight sealing it is sufficient to grease sealing surface a little. No additional sealing ring is necessary. The additional rim at the bell prevents grease stains on lab benches.
Flow rate per stroke:
36 ml
|
Manufacturer Article Number:
6132-0020
With PVC casing. Vacuum of approx. 86 mbar can be achieved and maintained. With outlet valve with detachable cover and separate vacuum release lever. Tubing connection nozzle fits tubing with an internal diameter of 6.4 mm. Supplied with 60 cm length of clear plastic tubing. Can be disassembled for repair or replacement of internal parts.
Flow rate per stroke:
15 ml
|
Manufacturer Article Number:
6131-0010
With PVC casing. Vacuum of approx. 86 mbar can be achieved and maintained. With outlet valve with detachable cover and separate vacuum release lever. Tubing connection nozzle fits tubing with an internal diameter of 6.4 mm. Supplied with 60 cm length of clear plastic tubing.
Connection size:
NS 24/29
|
Length:
124 mm
|
Manufacturer Article Number:
02822404
|
Material:
Boro 3.3
|
Olives ext. Ø:
8 mm
With PTFE spindle. For NOVUS-type desiccators.Cone: NS 24/29, bore: NW 2,5 mm, hose connection: outer dia. 8 mm.
Regenerationstemperatur:
100 °C
|
Regenerationszeit:
6 h
|
Regenerierbar:
Ja
|
Capacity:
30 g
|
Manufacturer Article Number:
F42049-0100
|
Weight g:
30
|
Ø mm:
72
For moisture reduction in desiccators and precision laboratory instruments. The transparent polypropylene dish allows visual inspection of silica gel, which changes in colour from blue to pale pink as it absorbs moisture. The desiccant can be easily regenerated by heating cartridges in an oven at 50°C overnight or at 100°C for 6 hours. For faster regeneration, remove the membrane lid, heat the spent gel crystals in a suitable glass or porcelain dish at 150°C in the oven for one hour.Inert, non-corrosive, non-toxic silica gelIndividually foil sealed
Connection size:
NS 24/29
|
Length:
108 mm
|
Manufacturer Article Number:
02842404
|
Material:
Boro 3.3
|
Olives ext. Ø:
8 mm
With PTFE spindle. For NOVUS-type desiccators.Cone: NS 24/29, bore: NW 2,5 mm, hose connection: outer dia. 8 mm.
Ext. depth:
305 mm
|
Ext. height:
178 mm
|
Ext. width:
305 mm
|
External dimensions (WxDxH):
305 x 305 x 178 mm
|
Manufacturer Article Number:
5317-0070
|
Material:
Acrylic
|
Max. no. of shelves:
3
|
Nominal capacity:
15 l
|
UNSPSC:
41-10-44-00
All components requiring controlled storage conditions can be stored in the transparent drying chambers, from anhydrous and hygroscopic materials to electronic equipment.Safe sealing with neoprene door sealsDoors secured with two stainless steel locks (three at the largest chamber) and a hinge running over the entire door heightRemovable tray with rim for solid desiccantsInserts are removable, height-adjustable and provided with holes
Manufacturer Article Number:
5312-0230
|
Plate Ø:
230 mm
Light-green, ceramic-metal composite. With numbered quadrants. Autoclavable.
Connection pressure side:
G1/8"
|
Connection suction side:
KF DN 16
|
Depth:
224 mm
|
Dimensions (WxDxH):
158 x 224 x 231 mm
|
Flow rate:
3 m³/h
|
Height:
231 mm
|
Manufacturer Article Number:
142030V430+80010
|
Max. voltage:
230 V
|
Noise level:
54 db(A)
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
SCROLLVAC 3S plus
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
0.1 mbar
|
Ultimate vacuum with gas ballast:
0.15 mbar
|
Weight:
8 kg
|
Width:
158 mm
The oil-free, dry-compressing vacuum pump works on the principle of a scroll compressor and combines a high pumping speed with a good ultimate vacuum. Ideal for small laboratories as well as applications in research and development. The integrated exhaust valve provides effective protection against a rapid pressure rise in the event of a power failure. Additional system protection is provided by the solenoid inlet valve with delay relay, which isolates the pump from the system and preserve the vacuum inside the system.Powerful, dry-operating alternative to diaphragm pumpsCan be operated horizontally or verticallyCompact design with low weightMax. pump speed of 3 m3/hCarrying handle facilitates transport of the pumpBuild-in manual gas ballastLong maintenance intervals due to oil-free operation, low maintenanceLow vibration and quiet operation
Variants from €4,132.10*
DN:
100
|
Manufacturer Article Number:
119C/90
|
Material:
Porcelain
|
Plate Ø:
90 mm
Perforated. Without feet. To DIN 12911. 20mm diameter central hole and 5mm diameter outer holes.
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*