Riplate® round wells - Standard in MultifunctionRaised wells reduce the risk of cross-contamination and increase the security of hot sealing or sealing with adhesive foils. Riplate® 1ml is ideal for use in a thermocycler or for defrosting of samples in a hot-water bath. The U-shaped well bottom reduces the death-volume.Riplate® square wells - For a Maximum in CapacityRiplate® SW have been developed for optimal use of capacity when it comes to sample storage. Due to the SBS-format the outside dimensions of Riplate® are given. Form follows function: the construction of cavities is crucial for a maximum absorption of liquids.Riplate® medio - Saves 50% of Storage CapacityDue to the compact construction of Riplate® medio less than 50% stacking size is needed. Higher well rims allow an airtight closure or sealing of Riplate® medio. The alphanumeric marking allows registration and identification of single assays.Riplate® 384 - Optimized for Smaller VolumesAvailable in PS and PP for automated screening and storage systems. Alphanumeric marking for identification of samples. Round cavities for reduced capillary forces. With flat well-bottom - ideal for microscopic and optical applications.Field of application: screening, sample storage et al. Ritter Riplate® systems are in line with the SBS-standard and are suitalbe for automation systems with corresponding closing- and sealing-mechanism.

Developed for a range of uses, e.g. High-Throughput Screening (HTS), general analysis which requires a master reservoir plate, cell and tissue culture, sample storage, etc. Deep well plates can be used with all leading robotic systems and other autosampling devices.Capacities: 96 well: 0.5ml, 1.1ml, (1ml with lid), 1.2ml or 2.2ml (2ml with lid), 384 well: 0.3mlU-bottom wellsLow Profile and Standard profile96 well: 12 x 8 array, 384 well: 24 x 16 arrayHigh chemically-resistant polypropylene (e.g.: against DMSO, phenol, chloroform)ANSI/SLAS formatAlphanumeric well codingPlates suitable for freezing down to -80°C (PP) or -20°C (PS)One notched corner ensures correct orientation.StackableDNA-, RNase-, DNAse -free

The plates are suitable for sample collection, storage, combinatorial chemistry, substance libraries, bacteria and yeast cultures and as collection plates for Nunc filter plates. They are resistant to most chemicals, solvents and alcohols used in combinatorial chemistry.Colour naturalWith shared wall technologyRound bottom reduces fluid retention

The plates are suitable for agglutination tests, sample collection and storage.TransparentRound bottom for optimal sample recoveryAlphanumeric grid allows quick and easy identification of samplesFor use with robots and liquid handling systemsCan be closed with sealing mats and adhesive foil

Efficient performance of plasmid DNA, PCR and vacuum filtrations. Suitable for vacuum, filtration, centrifugation or overpressure processes. The plates are recommended for protein purification, lysate clarification and general filtration.The glass fibre plate has a PET frit and two layers of glass fibre membrane for binding DNA. The PET frits have a pore size of 20 µm.Specially designed for high throughput sample processingWith shared wall technology

Deep-well plates from Ratiolab are available as standard or low profile version with different volumes from 1,2 to 4,6 ml for each well.Available with U-bottom (low profile + standard) and as V-bottom versionSBS standard micro test plate formatWells with significantly larger cross section for reduced cross-contaminationImproved visual control due to clear polypropylene1,2 ml low profile is about half as high as conventional deep-well plates30 % less storage space when using low profile platesAutoclavable at 121 °C, 20 minTemperature resistant to -80 °C8 x 12 wells with alphanumeric code in micro test plate formatPrecise design, for use in automatic pipetting systems for High Throughput Screening (HTS)Optimum space for bar code labels on the side wallsSpace-saving and stackable* with square opening

DNA LoBind plates for maximum sample recovery from nucleic acids by reducing the binding of the sample to the surface. Suitable for preparation or storage of DNA and RNA samples, forensic trace analysis, preparation of dilution series in quantitative qPCR, sample preparation in next-generation sequencing and creation of genome or oligonucleotide libraries.PCR clean: free of human DNA, DNase, RNase and PCR inhibitorsHigh-contrast, alphanumeric letteringFrame white or blueRounded RecoverMax®-Well-DesignElevated well frames for reliable sealing*Available with bar code (on request)

High-performance plates for manual or automated applications. Suitable for sample storage and preparation, bacteria and yeast cultivation, DNA and RNA isolation, protein analysis and plasmid purification.Clear wellsFrame, white or colouredHigh-contrast, alphanumeric letteringAutoclavable (121 °C, 20 min)Centrifugation resistance up to 6000 × gRounded RecoverMax®-Well-DesignElevated well frames for reliable sealing, even with heat sealingStackablePCR clean: free of human DNA, DNase, RNase and PCR inhibitors or sterile*Available with bar code (on request)

UniFilter® 800, well capacity: 800µl. Drip director type long.

Produced in a cleanroom environmentRNase-, DNase-, Human DNA- and pyrogen-freeVirgin PolypropyleneChoice of well-types384 square wellspyramidal well bottom for optimal sample retrievalraised rims for optimal sealing and reduced risk of cross-contaminationraised rims on the corners to protect edges of sealschemical resistant (e.g. against DMSO, Phenol, Chloroform)autoclavable (121 °C)Virgin polypropylene, certified RNase, DNase and endotoxin free

Suitable for test preparation and for storage and transport of samples.ClearProduced under clean room conditionsCompatible with automated systemsRNase und DNase free

for sample storagealphanumeric gridthermoplastic elastomerflexible with end tabs

Cover mats reduce the maximum volume of wells, but improve sealing and reduce sample evaporation. Adhesive sealing films can also be used.

The pre-slit sealing mats are designed for use with shared wall microtiter plates and allow penetration into the well using a pipette tip or probe without damaging the caps. To store chemicals or compounds and to prevent contamination and evaporation of the well contents.Chemical resistantSolvent-resistantPierceableTemperature resistant down to -80 °C* individually packed** repeatedly pierceable