Filter
Filter
La-Pha-Pack GmbH
Aluminium crimp seals ND11, ready assembled
Cap size:
ND11
|
Colour:
Silver
|
Colour septa:
Dark blue/white
|
Int. bore Ø:
5.5 mm
|
Material:
Aluminium
|
Material septa:
Silicone/PTFE
|
Shore hardness:
45 A
|
Thickness:
1.3 mm
|
With hole:
Yes
€87.45*
Macherey-Nagel GmbH & Co. KG
Crimp neck vials N11
Bottom shape (Cryo tubes, Tubes, Reaction vessels):
Flat
|
Cap size:
ND11
|
Colour:
Brown
|
Dimensions (ØxH):
11.6 x 32.0 mm
|
Height:
32.0 mm
|
Nominal capacity:
1.5 ml
|
With labelling field:
Yes
|
Ø:
11.6 mm
MaterialsAccording to the high requirements of chemical analyses, especially with regard to reproducibility combined with high detection sensivity, the container material for the respective samples is of great importance. In general, for this purpose vials made from glass are used. The hydrolytic resistance of the glass can be taken as a measure for its chemical inertness. Determination of the hydrolytic resistance and the resulting classification of a glass grade are governed by the German and international industrial standard DIN 12111 / ISO 719. Glass grades are classified in hydrolytic classes .We supply vials from the following classes:1st hydrolytic classGlass grades made from borosilicate, such as DURAN®, Pyrex®, Fiolax® and others belong to this group. Glass of this class, which is often called neutral glass, has a very good chemical resistiance towards acid and neutral solutions. The relatively low alkali content permits good values for the resistance towards alkaline solutions, too. If nothing else is stated, the vials of our programme are made from glass of the 1st hydrolytic class (manufactured in accordance with Eu.Ph. VI Ed., U.S.P. XXV Ed., DAB-10, Ph. Jap. 13).3rd hydrolytic class, Soda-lime glassGlass of this class, also called soft glass or lime soda glass, has a mediumhydrolytic resistance. For longtime storage of aqueous and especially alkaline-aqueous samples (for example to use them repeatedly) itis not recommended. Nevertheless, it can be used for many analytical applications.We supply the following types of sample bottles:vials with crimp top and corresponding capsscrew thread vials and srew capssealing disks for individual combinations of cap and sealExcept for a few frequently used combi packs, vials and caps can be ordered separately, thus allowing a wide range of possible combinations.Advantages of the DIN crimp top:Crimp top vials are available with 3 differnt rim heights: 3mm, DIN crimp top with 3,6mm and 4mm. When using only one crimper, tedious adjustments for the different heights are necessary. The standardized DIN crimp top avoids this problem. The rim height in accordance with DIN 58366 should be 3,6 +/- 0,2mm. We supply vials with DIN crimp top for volumes above 5ml.Except where explicitly mentioned, caps with sealing disks are supplied assembled, i. e. ready-to-use. Seals below the caps are shown for illustration purposes only, and they are pictured upside down.Standard glass vials with wide opening.
€15.30*
Macherey-Nagel GmbH & Co. KG
Crimp top vials and crimp caps N 11 as combi packs
Description:
Combipack N 11-1 HP, clear + N 11 N 20 TB/oA coloured aluminium caps andred silicone / white PTFE seals
Sealing disks assembled.
€333.00*
Macherey-Nagel GmbH & Co. KG
High performance crimping tool, electronic
Description:
Crimping head for 11 mm crimp caps
Easy to read from the digital LED display, the different jaw settings can be stored in separate programs.Exchangeable crimping / decapping headsDue to high motor power also suitable for magnetic and bi-metal crimp capsWith fixed 12 V DC power supplyOne year warranty
€231.00*
LLG Labware
Inserts for LLG-Short Thread Vials ND9/ND10 and LLG-Snap Ring Vials ND11, wide opening
Bottom shape (Cryo tubes, Tubes, Reaction vessels):
Conical
|
Colour:
Clear
|
Dimensions (ØxH):
6 x 31 mm
|
Height:
31 mm
|
Nominal capacity:
0.1 ml
|
Version (Vials):
Tip, 12 mm
|
Ø:
6 mm
€26.29*
LLG Labware
LLG Crimp Neck Vials economy ND11, wide opening
Bottom shape (Cryo tubes, Tubes, Reaction vessels):
Flat
|
Cap size:
ND11
|
Colour:
Clear
|
Dimensions (ØxH):
11.6 x 32 mm
|
Height:
32 mm
|
Nominal capacity:
1.5 ml
|
Ø:
11.6 mm
Hydrolytical class 1, expansion 70.
€80.88*
LLG Labware
LLG Crimp Neck Vials ND11, small opening
Bottom shape (Cryo tubes, Tubes, Reaction vessels):
Flat
|
Cap size:
ND11
|
Colour:
Clear
|
Dimensions (ØxH):
11.6 x 32 mm
|
Height:
32 mm
|
Nominal capacity:
1.5 ml
|
With labelling field:
No
|
Ø:
11.6 mm
€15.66*
LLG Labware
LLG Crimp Neck Vials ND11, wide opening
Bottom shape (Cryo tubes, Tubes, Reaction vessels):
Flat
|
Cap size:
ND11
|
Colour:
Brown
|
Dimensions (ØxH):
11.6 x 32 mm
|
Height:
32 mm
|
Nominal capacity:
1.5 ml
|
With labelling field:
No
|
Ø:
11.6 mm
€14.04*
LLG Labware
LLG Crimp neck vials ND13
Bottom shape (Cryo tubes, Tubes, Reaction vessels):
Flat
|
Cap size:
ND13
|
Colour:
Clear
|
Dimensions (ØxH):
16 x 32 mm
|
Height:
32 mm
|
Nominal capacity:
2 ml
|
Ø:
16 mm
€299.24*
LLG Labware
LLG Septa for Screw Caps ND24
Colour:
White/beige
|
Material:
Silicone/PTFE
|
Shore hardness:
45 A
|
Thickness:
3.2 mm
|
Ø:
22 mm
€66.46*
LLG Labware
LLG Septa for Screw Caps ND8
Cap size:
ND8
|
Colour:
Red/beige
|
Material:
Red Rubber/PTFE
|
Shore hardness:
45 A
|
Thickness:
1.30 mm
€7.37*
LLG Labware
LLG Snap Caps ND18 and ND22, LDPE
Cap size:
ND18
|
Colour:
Transparent
|
Material:
LDPE
For sealing of snap ring vials.
€7.92*
LLG Labware
LLG-2in1 KITs with crimp neck vials ND11 (wide opening)
Cover type:
Crimp Cap, silver, hole, Naturual Rubber red-orange /TEF transparent
|
Description:
clear
2in1 KITs contain 100 vials (1.5 ml) and 100 closures in an orange PP-Box. As both components are always required at the same time, 2in1 KITs are a convenient way to obtain and store all required items for analysis. All advantages of the individual components (cleanroom packaging of the vials, recloseability of the packaging, etc.) remain unchanged.Any other combination of vial and seal as a 2in1 KIT available.
€25.65*
LLG Labware
LLG-2in1 KITs with Screw Neck Vials ND8 (small opening)
Cover type:
Screw Cap, black, hole, Silicon white / PTFE red
|
Description:
clear
|
Type:
2in1 Kit
|
Volume ml:
1.5
2in1 KITs contain 100 vials (1.5 ml) and 100 closures in an orange PP-Box. As both components are always required at the same time, 2in1 KITs are a convenient way to obtain and store all required items for analysis. All advantages of the individual components (cleanroom packaging of the vials, recloseability of the packaging, etc.) remain unchanged.Any other combination of vial and seal as a 2in1 KIT available.
€51.09*
LLG Labware
LLG-2in1 KITs with Short Thread Vials ND9 (wide opening)
Cover type:
Short Thread Cap, black, hole,Silicon white / PTFE blue, slitted
|
Description:
clear
2in1 KITs contain 100 vials (1.5 ml) and 100 closures in an orange PP-Box. As both components are always required at the same time, 2in1 KITs are a convenient way to obtain and store all required items for analysis. All advantages of the individual components (cleanroom packaging of the vials, recloseability of the packaging, etc.) remain unchanged.Any other combination of vial and seal as a 2in1 KIT available.
€40.49*
LLG Labware
LLG-Aluminium Crimp Caps ND8, ready assembled
Cap size:
ND8
|
Colour:
Silver
|
Material:
Aluminium
|
With hole:
Yes
€6.49*
LLG Labware
LLG-Aluminium Crimp Seals ND11, ready assembled
Cap size:
ND11
|
Int. bore Ø:
5.5 mm
|
Material:
Aluminium
|
Material septa:
Aluminium
|
Thickness:
0.06 mm
|
With hole:
Yes
Crimp seals ND11 with aluminium septaSepta made from aluminium are suitable for storing standards or reactive substances that can attack normal septum materials. There is also no risk of contamination of the samples with plasticisers, silicone or butyl rubbers or by PTFE, FEP or TEF components. A ring placed above the aluminium septum achieves an excellent seal on the stopper system.PropertiesPlain lacquered cap with 5.5 mm holeElastomer- and halogen-freeExcellent seal tightness thanks to additional ringPackaged in plasticiser-free packaging (glass container)Application areasElastomer and plastomer analysisPhthalate analysisAnalysis of fluorinated/halogenated organic compoundsVOC analysis (volatile organic compounds)Analysis of polymerisation catalysts
€31.80*
LLG Labware
LLG-Aluminium Crimp Seals ND11, ready assembled
Cap size:
ND11
|
Colour:
Green
|
Colour septa:
Red-orange/transparent
|
Material:
Aluminium
|
Material septa:
Natural rubber/Butyl/TEF
|
Shore hardness:
45 A
|
Thickness:
1.00 mm
|
With hole:
Yes
€13.50*
LLG Labware
LLG-Aluminium Crimp Seals ND13, ready assembled and empty Crimp Caps ND13
Cap size:
ND13
|
Colour:
Silver
|
Int. bore Ø:
6 mm
|
Material:
Aluminium
|
With hole:
Yes
€9.35*
LLG Labware
LLG-Bimetal Crimp Seals ND20, ready assembled, magnetic
Cap size:
ND20
|
Colour:
Red
|
Int. bore Ø:
8 mm
|
With hole:
Yes
€16.59*
LLG Labware
LLG-Crimp Neck Micro-Vials ND8
Bottom shape (Cryo tubes, Tubes, Reaction vessels):
Conical
|
Cap size:
ND8
|
Colour:
Clear
|
Dimensions (ØxH):
7 x 40 mm
|
Height:
40 mm
|
Nominal capacity:
0.6 ml
|
Ø:
7 mm
€17.12*
LLG Labware
LLG-Crimp Neck Vial ND20 for the doping control
Bottom shape (Cryo tubes, Tubes, Reaction vessels):
Flat
|
Cap size:
ND20
|
Colour:
Clear
|
Dimensions (ØxH):
51.6 x 94.5 mm
|
Height:
94.5 mm
|
Nominal capacity:
100 ml
|
Version (Vials):
DIN crimp neck, flat
|
Ø:
51.6 mm
100 mL crimp neck vial, 51.6 x 94.5mm, clear, flat bottom, flat DIN crimp neck.
€56.07*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.32*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.32*
Your watch lists
Loading...