Filter
Filter
Filter size:
S
|
Manufacturer Article Number:
M 506-01
|
Material:
PP
|
Shelf life:
3 months
|
Thread:
GL 14
Lid with integrated ventilation openings and service life indicator. The filling of activated carbon is protected by two porous membranes made of PE. This allows an unobstructed flow of exhaust air, solvents are adsorbed by the activated carbon and only filtered air streams out.
Capillary connections:
4
|
Manufacturer Article Number:
307410-PP
|
No. of blind plugs:
3
|
No. of fittings:
4 x 1,6/4 x 2,3/4 x 3,2 mm
|
Thread:
GL 45
Screw caps, with freely movable insert made of PP, for connecting capillary tubing and air valve. For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.Insert made of PPFittings made of PPScope of supply:Cap, fittings (PP), air valve, service life indicator, labelling field
Capillary connections:
3
|
Connection for exhaust filter:
1
|
Manufacturer Article Number:
107960
|
Material:
PTFE
|
No. of fittings:
3 x 2,3/3,2 mm
|
Thread:
S 55
|
UNSPSC:
41-12-18-14
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries, hose olives for tubes with 5.0 - 11.5 mm inner diameter and a connection for exhaust air filter. Please order your exhaust filter separately.The integrated float warns in time if the container is overfilled. Perfect for containers of opaque material, where the fill level is not visible from the outside.
21%
Filter size:
M
|
Manufacturer Article Number:
490336
|
Shelf life:
6 months
|
Thread:
GL14
The exhaust air filters are equipped with three different activated carbon layers, which bind acids and alkalis and adsorb organic solvent vapours. Depending on the required capacity, filter with different service lifes are available.Filter media with a very high performance spectrum for acids and alkalisOptimised for binding buffer solutions and solvent vapoursWith splash guard1500 m²/g adsorption surface area
Variants from €59.90*
Autoclavable:
Yes
|
Capillary connections:
4
|
Connection for exhaust filter:
1
|
Hose connections:
1
|
Manufacturer Article Number:
108055
|
Material:
PTFE
|
No. of fittings:
4 x 2,3 / 3,2 mm
|
No. of olives:
1
|
Thread:
S 65
|
UNSPSC:
41-12-18-14
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries, hose olives for tubes with 5.0 - 11.5 mm inner diameter and a connection for exhaust air filter. Please order your exhaust filter separately.Scope of supply:Safety Waste Cap, PFA fittings, hose olive, grounding connection
Autoclavable:
Yes
|
Capillary connections:
4
|
Connection for exhaust filter:
1
|
Manufacturer Article Number:
107928
|
Material:
PTFE
|
No. of fittings:
4 x 2,3 / 3,2 mm
|
Thread:
S 90
|
UNSPSC:
41-12-18-14
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries, hose olives for tubes with 5.0 - 11.5 mm inner diameter and a connection for exhaust air filter. Please order your exhaust filter separately.Scope of supply:Safety Waste Cap, PFA fittings, hose olive, grounding connection
Colour:
Colourless
|
Manufacturer Article Number:
107168
|
Material:
PP
|
Thread:
UNF 1/4" 28G
|
UNSPSC:
41121815
For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.
Colour:
Colourless
|
For ext. tubing Ø:
1.6 mm
|
Manufacturer Article Number:
107165
|
Material:
PP
|
Thread:
UNF 1/4" 28G
|
UNSPSC:
41121815
For fixing tubing in the capillary connections. For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.
Colour:
Green
|
Manufacturer Article Number:
317010-PP
|
Material:
PP
|
Shelf life:
6 months
|
Thread:
UNF 1/4" 28G
The air valve blocks harmful vapours and ensures safe pressure equalisation in the storage tanks. For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.With filter membraneLuer-Lock connectionChange indicator
Autoclavable:
Yes
|
Capillary connections:
2
|
Connection for exhaust filter:
1
|
Hose connections:
1
|
Manufacturer Article Number:
307944
|
Material:
PTFE
|
No. of blind plugs:
1
|
No. of fittings:
2 x 2,3 / 3,2 mm
|
No. of olives:
1
|
Thread:
S 60/61
|
UNSPSC:
41-12-18-14
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries, hose olives for tubes with 5.0 - 11.5 mm inner diameter and a connection for exhaust air filter. Please order your exhaust filter separately.Scope of supply:Safety Waste Cap, PFA fittings, hose olive, grounding connection
Manufacturer Article Number:
M 146-10
|
Thread:
GL45
|
Thread:
GL 45
|
Type:
Starter Box 1
|
Type:
Starter box 1
Initial equipment for HPLC with b.safe-Caps for bottles with thread GL 45. Furthermore fittings for easy connection of capillary tubing, blind fittings for closing unused connections and air valves for a trouble-free withdrawal of solvents are included. For up to 4 storage bottles. Scope of supply: 3 x b.safe-cap GL 45 with 2 connections UNF ¼" 28G, 1 x b.safe-cap GL 45 with 3 connections UNF ¼" 28G, 4 x air valve with service life indicator, 5 x fittings yellow for tubing O.D. 3.2 mm, 1 x blind fitting
Colour:
Yellow/green
|
Manufacturer Article Number:
M 405-01
|
Material:
PP
|
Shelf life:
6 months
|
Thread:
UNF ¼" 28G
The integrated non-return valve avoids evaporation of solvents and lets flow ambient air into the bottle in case of vacuum. The upstream PP membrane restrains pollutant particles and other contaminations from outside.Free from polyhaloolefinsLid with aeration opening and Luerlock connectorClip-on service life indicator
Colour:
White
|
Manufacturer Article Number:
350110
|
Material:
PTFE
|
Thread:
M30x35
|
UNSPSC:
41121815
Autoclavable:
Yes
|
Capillary connections:
3
|
Connection for exhaust filter:
1
|
Manufacturer Article Number:
107936
|
Material:
PTFE
|
No. of fittings:
3 x 2,3 / 3,2 mm
|
Thread:
S 55
|
UNSPSC:
41-12-18-14
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries, hose olives for tubes with 5.0 - 11.5 mm inner diameter and a connection for exhaust air filter. Please order your exhaust filter separately.Scope of supply:Safety Waste Cap, PFA fittings, hose olive, grounding connection
Description:
HPLC Supply and waste set
|
Manufacturer Article Number:
307338
Scope of supply:4 x Safety Cap III, GL458 x air valve1 x Safety Waste Cap, GL451 x Exhaust filter L, V3.0, with splash guard and change indicator, service life 12 months1 x 5 l canister, HDPE4 x Laboratory bottle DURAN, GL45, 1000 ml, clear glass, with cap and pouring ring5 x PFA-fitting, 2.3 mm OD, violet5 x PFA fitting, 1.6 mm OD, green10 x PFA fitting, 3.2 mm OD, blue10 x PFA blind plug2 x hose connectors, straight, 6 - 8 mm ID1 x hose connectors, curved, 5.0 - 11.5mm ID1 x hose connectors, angled, 9.5 - 10 mm ID
Colour:
White
|
For ext. tubing Ø:
1.6 mm
|
Manufacturer Article Number:
M 401-06
|
Material:
PE
|
Thread:
UNF 1/4“ 28G
|
UNSPSC:
41121815
For fixing tubes in the capillary connections of b.safe Caps.
Autoclavable:
Yes
|
Capillary connections:
3
|
Connection for exhaust filter:
1
|
Manufacturer Article Number:
107915
|
Material:
PTFE
|
No. of fittings:
3 x 2,3 / 3,2 mm
|
Thread:
S 70/71
|
UNSPSC:
41-12-18-14
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries, hose olives for tubes with 5.0 - 11.5 mm inner diameter and a connection for exhaust air filter. Please order your exhaust filter separately.Scope of supply:Safety Waste Cap, PFA fittings, grounding connection
Colour:
White
|
Manufacturer Article Number:
M 401-01
|
Material:
PE
|
Thread:
UNF ¼"
|
UNSPSC:
41121815
To close unused connections on b.safe Caps PFAS Analytic.
Connection for exhaust filter:
1
|
Manufacturer Article Number:
306482
|
Material:
PTFE
|
Thread:
S 60/61
Safe venting is optionally via SCAT exhaust air filters or direct connection to your exhaust air system. Connection GL 25.
Colour:
Black
|
Connection for exhaust filter:
1
|
Manufacturer Article Number:
307971
|
Thread:
S60/61
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries, hose olives for tubes with 5.0 - 11.5 mm inner diameter and a connection for exhaust air filter. Please order your exhaust filter separately.NPT 3/8"Connection for exhaust air filter, 45° bevelled
Description:
HPLC Waste set 20
|
Manufacturer Article Number:
307380
Scope of supply:1 x Safety Waste Cap, S60/613 x PFA fitting 2.3 mm OD3 x PFA fitting 2.3 mm OD3 x PFA fitting 3.2 mm OD3 x PP tube connector 5.0 - 11.5mm ID1 x GL14 connection for exhaust filter1 x canister, S60/61, 5 l, HDPE, UN-X1 x exhaust filter M, with splash guard and change indicator
Capillary connections:
3
|
Connection for exhaust filter:
1
|
Manufacturer Article Number:
108200
|
Material:
PTFE
|
No. of fittings:
3 x 2,3/3,2 mm
|
Thread:
S 55
|
UNSPSC:
41-12-18-14
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries, hose olives for tubes with 5.0 - 11.5 mm inner diameter and a connection for exhaust air filter. Please order your exhaust filter separately.Electronic level control with floater and signal cable for connecting with electronic signal boxes.
Description:
Eluent SafetyCap Starter Kit I
|
Manufacturer Article Number:
SC000164.1*LE
|
Thread:
GL45
|
Thread:
GL 45
|
Type:
Starter Kit I
Starter Kits für die HPLC mit bis zu 4 Vorratsflaschen. Die Kits enthalten zusätzlich Belüftungsventile, Fittings zum Anschluss von Kapillaren, sowie Blindstopfen zum Verschließen nicht benötigter Anschlüsse.Lieferumfang: 4 x Eluent SafetyCaps mit 1 PP-Fitting, 4 x Belüftungsventile
Description:
HPLC starter kit IV
|
Manufacturer Article Number:
399203-PP
|
Thread:
GL45
|
Type:
HPLC Starter Kit IV
For the safe withdrawal of solvents. Screw caps, with freely movable insert, with PP fittings for capillaries and an air valve, with change indicator. For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.Complete set for up to 4 storage bottlesSuitable for all current HPLC systemsScope of supply:4 x Safety Cap IV, GL 45, PFAS-Analytic4 x air valve, PFAS-Analytic4 x change indicator16 x PP fitting 1.6 mm OD16 x PP fitting 2.3 mm OD16 x PP fitting 3.2 mm OD12 x PP blind plug4 x labelling field
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*
Your watch lists
Loading...