Filter
Filter
Ext. Ø:
0,22 mm
|
Int. Ø:
0.05 mm
|
Length:
2 m
|
Manufacturer Article Number:
062444
|
Material:
Quartz glass
|
UNSPSC:
41-12-17-09
Beschichtete Schläuche aus Quarzglas für GC-Kapillaranwendungen.Hohe HomogenitätChemisch inertStandard-Polyimid-Temperaturbeständigkeit bis 380 °CPolyimid-Beschichtung ist chemisch beständigNiedrige Dielektrizitätskonstante, geringer dielektrischer VerlustUndurchlässig für alle Gase (außer H2, He)Frei von thermischer HystereseHohe intrinsische ZugfestigkeitSehr geringe thermische AusdehnungDie Verwendung mit Flusssäure, Phosphorsäure, Alkalien und alkalimetallhaltigen Verbindungen ist zu vermeiden, da es zur Auflösung von Quarzglas und zur Entglasung der Oberfläche kommen kann.
Manufacturer Article Number:
041901
|
Material:
Silicone
|
Material:
EC
|
Temp. max. °C:
350
|
Ø:
9.5 mm
|
Ø mm:
9.5
Alle Septen sind aus hochwertigem Silikon hergestellt, um die Lochbildung durch die Nadel zu minimieren. Diese neuen Materialien erfüllen oder übertreffen die Industriestandards, sodass die Sicherheit und Qualität Ihrer Arbeit gewährleistet ist. Alle Septen garantieren eine gute Haltbarkeit, eine hervorragende Wiederverschließbarkeit und hervorragende Beständigkeit gegen Lösungsmittel.EC = Hochtemperatur Silikon Septen, mit deutlich längerer Lebensdauer, geringem Bluten und niedriger Haftung am Injektor.
Int. Ø:
0.3 mm
|
Manufacturer Article Number:
215103
Qualitativ hochwertige Ferrules aus 15 % Graphit/ 85 % Vespel®. 1/16" GC Ferrules lang.
Int. Ø:
0.4 mm
|
Manufacturer Article Number:
215164
Qualitativ hochwertige Ferrules aus 15 % Graphit/ 85 % Vespel®. 1/16" GC Ferrules.
Description:
Viton o-ring, suitable for liners with OD 6.3 mm
|
Ext. Ø:
6.3 mm
|
Int. diam. mm:
4.0
|
Length mm:
78.5
|
Manufacturer Article Number:
0726532
|
Outer diam. mm:
6.3
|
UNSPSC:
31181506
Gauge:
26 (0,47)
|
Length needle:
50 mm
|
Manufacturer Article Number:
0019821
|
Needle:
fixed
|
Nominal capacity:
5 µl
|
Shape tip (needle):
Conical
|
UNSPSC:
41-12-20-01
Syringes for CTC Analytics CombiPal and GC PAL. High reproducibility, low carry-over.
Gauge:
23 (0,63)
|
Length needle:
42 mm
|
Manufacturer Article Number:
002812
|
Needle:
fixed
|
Nominal capacity:
10 µl
|
UNSPSC:
41-12-20-01
GC syringes for Agilent autosampler 7673, 7683 and 6850With fixed or removable needleTwo different needle diameter and tapered needlesHigh reproducibility, low carry-over
Gauge:
23 (0,63)
|
Length needle:
50 mm
|
Manufacturer Article Number:
003987
|
Needle:
fixed
|
Nominal capacity:
25 µl
|
Shape tip (needle):
Conical
|
UNSPSC:
41-12-20-01
Syringes for CTC Analytics CombiPal and GC PAL.High reproducibility, low carry-overFor Thermo TriPlus
Variants from €82.72*
Ext. Ø:
0,68 mm
|
Int. Ø:
0.53 mm
|
Length:
5 m
|
Manufacturer Article Number:
064114
|
Material:
Quartz glass
|
UNSPSC:
41105108
Beschichtete Schläuche aus Quarzglas für GC-Kapillaranwendungen.Hohe HomogenitätChemisch inertStandard-Polyimid-Temperaturbeständigkeit bis 380 °CPolyimid-Beschichtung ist chemisch beständigNiedrige Dielektrizitätskonstante, geringer dielektrischer VerlustUndurchlässig für alle Gase (außer H2, He)Frei von thermischer HystereseHohe intrinsische ZugfestigkeitSehr geringe thermische AusdehnungDie Verwendung mit Flusssäure, Phosphorsäure, Alkalien und alkalimetallhaltigen Verbindungen ist zu vermeiden, da es zur Auflösung von Quarzglas und zur Entglasung der Oberfläche kommen kann.
Description:
Ersatz-Beutel
|
Description:
Replacement sample bags
|
Manufacturer Article Number:
090112
|
UNSPSC:
41-12-20-01
Variants from €28.93*
Gauge:
26 (0,47)
|
Length needle:
50 mm
|
Manufacturer Article Number:
0029851
|
Needle:
with
|
Nominal capacity:
10 µl
|
Shape tip (needle):
Conical
|
UNSPSC:
41-12-20-01
Syringes for CTC Analytics CombiPal and GC PAL. High reproducibility, low carry-over.
Int. Ø:
0.5 mm
|
Manufacturer Article Number:
215125
Qualitativ hochwertige Ferrules aus 15 % Graphit/ 85 % Vespel®. 1/16" GC Ferrules lang.
Filmdicke:
1.00 µm
|
Max. Temperatur Temperaturprogramm:
360 °C
|
Polarität:
unpolar
|
Temperatur Max. Isotherme:
340 °C
|
Int. Ø:
0.32 mm
|
Length:
12 m
|
Manufacturer Article Number:
054070
100% Dimethyl Polysiloxane. General purpose GC column for all routine analyses such as hydrocarbons, aromatics, pesticides, phenol, herbicides and amines. Suitable replacement for: DB-1, DB-Petro, HP-1, HP-1MS, Rtx-1, Ultra-1, SPB-1, SPB-1 Sulfur, Petrocol DH, CP-Sil 5CB, VB-1, ZB-1, VF-1ms.Low bleedNon-polar
Variants from €412.39*
Filmdicke:
0.50 µm
|
Max. Temperatur Temperaturprogramm:
340 °C
|
Polarität:
unpolar
|
Temperatur Max. Isotherme:
320 °C
|
Int. Ø:
0.53 mm
|
Length:
25 m
|
Manufacturer Article Number:
726523.25
|
Material column:
Quarzglas
|
USP listing:
G27, G36
5% phenyl - 95% dimethylpolysiloxane USP G27, G36 nonpaolar standard phase with large range of application similar phases: Permabond® SE-52 , SE-54, SE-52, DB-5, HP-5, SPB-5, CP-Sil 8, Rtx-5, 007-5, BP5, MDN-5, AT-5, ZB-5 for columns with 0.1 to 0.32mm ID and films
Variants from €329.00*
Filmdicke:
1.00 µm
|
Max. Temperatur Temperaturprogramm:
340 °C
|
Temperatur Max. Isotherme:
320 °C
|
Int. Ø:
0.53 mm
|
Length:
25 m
|
Manufacturer Article Number:
054198
5% Phenyl / 95% Dimethyl Polysiloxane. Low bleed. General purpose GC column for all routine analyses such as aromatics, pesticides, herbicides, hydrocarbons. Suitable replacement for: DB-5, Rtx-5, HP-5, Ultra-2, PTE-5, SPB-5, MDN-5, CP-Sil 8CB, VB-5, ZB-5, VF-5ms.
Variants from €368.61*
Colour:
Yellow/white
|
Manufacturer Article Number:
75801
|
Material:
PTFE/Silicone
|
Thickness:
3.18 mm
|
UNSPSC:
41-12-15-02
|
Ø:
6.35 mm
Preconditioned PTFE/silicone rubber septa. Maximum operatin gtemperature: 212 °C.
Variants from €32.40*
Filmdicke:
0.50 µm
|
Max. Temperatur Temperaturprogramm:
340 °C
|
Polarität:
unpolar
|
Temperatur Max. Isotherme:
320 °C
|
Int. Ø:
0.53 mm
|
Length:
25 m
|
Manufacturer Article Number:
726519.25
|
Material column:
Quarzglas
|
USP listing:
G1,G2,G38
100% dimethylpolysiloxanenonpolar phase separation of components according to boiling points thick film columns ≥3µm film are especially recommended for solvent analysis.Similar phases: Permabond® SE-30, OV-1, DB-1, SE-30, HP-1, SPB-1, CP-Sil 5 CB, Rtx-1, 007-1, BP1, MDN-1, AT-1, ZB-1, OV-101.For columns with 0.25 to 0.32mm ID and films
Variants from €590.00*
Filmdicke:
0.10 µm
|
Max. Temperatur Temperaturprogramm:
280 °C
|
Polarität:
polar
|
Temperatur Max. Isotherme:
260 °C
|
Int. Ø:
0.1 mm
|
Length:
10 m
|
Manufacturer Article Number:
054405
Polyethylene Glycol phase. GC column for analyses such as alcohol, free acids, fatty acid methyl esters, aromatics, solvents and essential oils. Suitable replacement for: Carbowax 20M, CP-Wax 52 CB, DB-WAX, Elite-WAX, HP-20M, HP-INNOWax RH-WAX, Rtx-Wax, Stabilwax, SUPELCOWAX 10, TG-WaxMS, VF-WAXms, ZB-WAX.Industry standard wax columnPolar phase
Gauge:
23 (0,63)
|
Length needle:
42 mm
|
Manufacturer Article Number:
002814
|
Needle:
fixed
|
Nominal capacity:
10 µl
|
UNSPSC:
41-12-20-01
GC syringes for Agilent autosampler 7673, 7683 and 6850With fixed or removable needleTwo different needle diameter and tapered needlesHigh reproducibility, low carry-over
Variants from €64.68*
Filmdicke:
0.25 µm
|
Max. Temperatur Temperaturprogramm:
350 °C
|
Polarität:
hochpolar
|
Temperatur Max. Isotherme:
330 °C
|
Int. Ø:
0.25 mm
|
Length:
30 m
|
Manufacturer Article Number:
054310
5% Phenyl Polysilphenylene-siloxane. For 5% GC-MS analysis and general purpose MS analysis. Suitable replacement for: DB-5ms, ZB-5ms, Rxi-5Sil MS, VF-5ms, CP-Sil 8 CB.
Variants from €406.01*
Filmdicke:
0.10 µm
|
Max. Temperatur Temperaturprogramm:
370 °C
|
Polarität:
unpolar
|
Temperatur Max. Isotherme:
360 °C
|
Int. Ø:
0.25 mm
|
Length:
15 m
|
Manufacturer Article Number:
0542170
5% Phenyl Polysilphenylene-siloxane. General purpose GC column for routine gas chromatographic analysis. Suitable replacement for: DB-5, DB-5ms, DB-5.625, XTI-5, Rtx-5ms, Ultra-2, HP-5, HP-5MS, HP5-TA, SPB-5, MDN-5S, CP-Sil8CB, Rxt-Sil 5MS, AT-5ms, VB-5, ZB-5, VF-5ms.Very low bleedNon-polarExtremely inert
Filmdicke:
0.5 µm
|
Max. Temperatur Temperaturprogramm:
340 °C
|
Polarität:
unpolar
|
Temperatur Max. Isotherme:
320 °C
|
Int. Ø:
0.25 mm
|
Length:
100 m
|
Manufacturer Article Number:
054818
100% Dimethyl Polysiloxane. For the analysis of petroleum products. Suitable Replacement for: Petrocol DH, DB-Petro, HP-PONA, AT-Petro, Elite-PONA, ZB-1, 007-1-100-0.5F, Rtx-1PONA, CP Sil PONA.Non-polar phase for PONA analysisDetailed hydrocarbon analysis according to ASTMCrosslinked and washableVery high resolving power columns for complex samples
Column ID mm:
0.1 - 0.32
|
Ferrule ID mm:
0.5
|
Fits for:
Standard
|
For:
Standard
|
Int. Ø:
0.5 mm
|
Manufacturer Article Number:
072610
|
UNSPSC:
41-12-20-01
High quality ferrules made of 100 % Graphite.
Filmdicke:
1.2 µm
|
Max. Temperatur Temperaturprogramm:
240 °C
|
Temperatur Max. Isotherme:
230 °C
|
Int. Ø:
0.22 mm
|
Length:
30 m
|
Manufacturer Article Number:
054827
|
USP listing:
G43
Cyanopropylphenyl Polysiloxane. For the analysis of volatile components of drinking water, chlorinated hydrocarbons, solvents and for the EPA method 624, USP G43 methods, SW-846 and 8240 / 8260 methods. Suitable replacement for: DB-624, OV-624, AT-624, HP-VOC, CP-Select624CB, 007-624, Rtx-Volatiles, VOCOL, ZB-624.
Variants from €831.60*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*
Your watch lists
Loading...