Can be labelled:
Yes
|
Colour:
Red
|
Length:
36.4 m
|
Manufacturer Article Number:
F13484-0050
|
Material:
Plastic
|
Max. temperature resistance:
157 °C
|
Min. temperature resistance:
-80 °C
|
Sterilisable:
Yes
|
Temperature resistance:
-80 ... 157 °C
|
Waterproof:
Yes
|
Width:
12.7 mm
Specially coated plastic tape with adhesive backing. Makes labels of any length. Can be used with any pens. Excellent adhesion to glass, metal, PE, etc. Resistant to humidity, as well as acids and alkali solutions in weak concentrations. Leaves no residue when removed.
Variants from €39.20*
Colour:
Transparent
|
Length:
32.9 m
|
Manufacturer Article Number:
F13491-0100
|
Material:
PES
|
Max. temperature resistance:
125 °C
|
Min. temperature resistance:
-196 °C
|
Sterilisable:
Yes
|
Temperature resistance:
-196 ... 125 °C
|
Width:
25 mm
Transparent. With special synthetic adhesive. Resistant to moisture and most solvents. Test results prove the tape remains securely affixed with no discoloration after being autoclaved for 40 minutes at 125 °C, as well as after one week in liquid nitrogen at -196 °C. Excellent adhesion to glass, metal, PE etc.
Depth:
206 mm
|
Dimensions (WxDxH):
117 x 206 x 60 mm
|
Height:
60 mm
|
Manufacturer Article Number:
F13450-0000
|
Material:
ABS
|
Width:
117 mm
Durable tape dispenser is molded of strong ABS plastic with a steel serrated cutting blade, tape roll held in place by aluminum roller and spring-loaded cover. Includes four non-slip rubber feet and screws.
Depth:
87 mm
|
Dimensions (WxDxH):
213 x 87 x 95 mm
|
Height:
95 mm
|
Manufacturer Article Number:
H13461-0000
|
Width:
213 mm
For one roll Write-On™ adhesive tapeWith epoxy-coated steel writing platformWeighted base with non-skid pads prevents sliding or lifting76 mm core fits standard tape rolls up to 25 mm wide and accepts tape rolls having a maximum diameter of 133 mmAccepts 36.6 m as well as 54.9 m rollsDimensions (W x D x H): 213 x 87 x 95 mmDimensions of writing platform 102 x 152 mm
Depth:
143 mm
|
Dimensions (WxDxH):
302 x 143 x 105 mm
|
Height:
105 mm
|
Manufacturer Article Number:
F13473-0000
|
Width:
302 mm
Provides a smooth writing surface, making labeling easy and fast. When marked tape is advanced and cut off on the serrated edge, a fresh length of label tape is positioned on the writing platform. Plastic cutting edge is moulded into the housing. Various widths and colours of tape rolls can be mixed together on the spindles, which accommodates 5 or more 12 to 19mm narrow rolls or 4 x 25mm wide rolls. Spindles are easily removed from the unit for loading and unloading and can be adjusted to hold either 25 or 75mm core diameter rolls.Includes three plastic separating discs to assure smooth, snag free dispensing for up to four rolls of tape (additional discs on request).Moulded-in pen holder wells on the dispenser help to keep writing instruments handyIdeal for use with the full line of Write-On™ Tapes, which are available in 6 colors and 3 widths.Includes mounting holes for secure attachment to a benchtop (screws not included). Can also be attached to vertical surfaces using Wall Mount AdapterDimensions (W x D x H): 302 x 143 x 105 mmItems supplied: Adhesive tape dispenser incl. 1 roll of 12mm white Write-On™ Labeling Tape
Colour:
White
|
Dimensions (WxL):
19 x 38 mm
|
For type of vessels:
General use
|
Length:
38 mm
|
Manufacturer Article Number:
099.07.038
|
Max. temperature resistance:
80 °C
|
Min. temperature resistance:
-196 °C
|
Temperature resistance:
-196 ... 80 °C
|
Waterproof:
Yes
|
Width:
19 mm
Manufactured from polyfiber grade flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and alwaysguarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -196 to 80 °C temperature range. Also withstands gamma irradiation. Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. Recommended specially to be used with cryo vials or on any flat or round surface.Supplied as 1000 label rolls packed in a dispenser box for practical use.
21%
Colour:
White
|
Dimensions (WxL):
13 x 33 mm
|
For type of vessels:
1.5 ... 2.0 ml tubes
|
Length:
33 mm
|
Manufacturer Article Number:
TTLW-1000
|
Material:
Polyester
|
Max. temperature resistance:
121 °C
|
Min. temperature resistance:
-40 °C
|
Sterilisable:
Yes
|
Temperature resistance:
-40 ... 121 °C
|
UNSPSC:
55121606
|
Waterproof:
Yes
|
Width:
13 mm
Temperature resistant from -40°C to 121°C. Tough-Tags resist boiling water baths, autoclaving and moderate freezer temperatures. Chemically inert labels resist most organic solvents and caustic agents. They adhere to most plastics, glass and metals without cracking, peeling and degrading. Tubes are pre-cut, peel-off labels which accept many marking instruments. They are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes labeled with Tough-Tags® easily slide in and out of centrifuge rotors without binding.
Colour:
Brown
|
Length:
66 m
|
Manufacturer Article Number:
04024-00235-02
|
Material:
PP
|
Width:
50 mm
Strong, brown tape.
Colour:
Transparent
|
Length:
66 m
|
Manufacturer Article Number:
04124-00012-00
|
Width:
25 mm
tesapack®4124, transparent.
Colour:
White
|
Dimensions (WxL):
38.1 x 21.2 mm
|
Length:
21.2 mm
|
Manufacturer Article Number:
4388
|
Max. temperature resistance:
60 °C
|
Min. temperature resistance:
-60 °C
|
Temperature resistance:
-60 ... 60 °C
|
UNSPSC:
41-12-33-04
|
Width:
38.1 mm
Self-adhesive deep-freeze labels on A4 sheets. Perfect for all PC printers (laser/inkjet/dot-matrix), copiers and multi-functional machines. Suitable for colour printers and copiers.Chlorine-free bleached special paper, PEFC-certifiedSolvent-free adhesiveLabel paper and adhesive are extremely resistant to temperatures (down to -60 °C, Min. adhesive temperature: -25 °C)Good adhesive properties at normal temperatures
21%
Colour:
Brown
|
For type of vessels:
0.5 ml tubes
|
Manufacturer Article Number:
T-SPOTS-C
|
Material:
PVC
|
Max. temperature resistance:
80 °C
|
Min. temperature resistance:
-196 °C
|
Temperature resistance:
-196 ... 80 °C
|
Ø:
9.5 mm
Pre-cut Peel-off round lables for 0.5 and 1.5/2.0ml microcentrifuge tube tops. Temperature resistant from -196 °C to 80 °C. Easy to write on: PVC labels accept writing from most lab markers. Convenient: Dispensing box assists in labeling individual tubes used in small experiments.
Can be labelled:
Yes
|
Length:
30 m
|
Manufacturer Article Number:
099.02.001
|
Material:
Paper
|
Max. temperature resistance:
110 °C
|
Min. temperature resistance:
-5 °C
|
Temperature resistance:
-5 ... 110 °C
|
Waterproof:
Yes
|
Width:
19 mm
Manufactured from colored paper with special resin adhesive that resists to moisture and most solvents. Can be used between -5 to 110 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces and peels off without leaving any sticky residue. Accepts writing from almost all pen types such as pencil, ball point pen, solvent ink marker etc. Markings remain absolutely legible under the most demanding laboratory conditions.Scope of supply:6 rolls (yellow, blue, green, red, orange, white) of 30 m
Colour:
White
|
Dimensions (WxL):
13 x 24 mm
|
For type of vessels:
0.5 ml tubes
|
Length:
24 mm
|
Manufacturer Article Number:
099.06.024
|
Max. temperature resistance:
121 °C
|
Min. temperature resistance:
-40 °C
|
Temperature resistance:
-40 ... 121 °C
|
UNSPSC:
55121606
|
Waterproof:
Yes
|
Width:
13 mm
Manufactured from polyfiber grade flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and alwaysguarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -40 to 121 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. Recommended to be used on flat or round surfaces with different diameters. Supplied as 1000 label rolls packed in a dispenser box for practical use.
Dimensions (WxL):
50 x 30 mm
|
For type of vessels:
General use
|
Length:
30 mm
|
Manufacturer Article Number:
099.03.050
|
Material:
PP
|
Max. temperature resistance:
121 °C
|
Min. temperature resistance:
-96 °C
|
Sterilisable:
Yes
|
Temperature resistance:
-96 ... 121 °C
|
UNSPSC:
55121606
|
Waterproof:
Yes
|
Width:
50 mm
Manufactured from polypropylene flexible paper with acrylic resin adhesive back. This unique combination does not expand and retract together with temperature fluctuations and therefore always guarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -96 to 121 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue.
Description:
Dry-Heat Sterilisation
|
Length:
55 m
|
Manufacturer Article Number:
7100025664
|
Width:
19 mm
Comply indicator tapes are process indicators and the ideal solution for securely sealing a wide variety of sheet packaging. For sterilisation with steam, hydrogen peroxide (H2O2) or hot air.Clear colour change visibleEasily readable resultDirect labelling possibleNo ink transfer to adhesive or other packagingStretchable, reduces the risk of tearingLatex freeSolvent freeLead-free
Variants from €11.51*
Manufacturer Article Number:
50-0016
|
Width:
50 mm
With brake.
Colour:
White
|
For:
LabelWriter™ Wireless, 450 TwinTurbo, 450 DUO, 550, 550 Turbo, 5XL
|
Length:
54 mm
|
Manufacturer Article Number:
2112283
|
Material:
Plastic
|
No. of packages:
1
|
Package:
1 x Roll of 160
|
Package capacity:
160
|
Width:
25 mm
LW Labels with industrial adhesive for secure, permanent adhesion to many surfaces, such as paper, plastic, metal, wood, and glass. A protective layer prevents peeling and abrasion caused by moisture, acetone, alcohol, and conventional cleaning agents.Scratch and tear resistant plastic materialLabel printing with direct thermal printing technologyPre-assembled labels for quick and easy applicationMoisture resistantBPA-freeTemperature resistant from -18 to 50 °C
Colour:
Black on white
|
For:
LabelManager™ 160, 210D+, 280, 360D, 420P, PnP, 500TS/LabelWriter™ 450 DUO
|
Length:
7 m
|
Manufacturer Article Number:
2093096
|
Material:
Polyester
|
Width:
9 mm
Label tape adheres to almost all clean, flat surfaces (such as plastic, paper, metal, wood, glass) and can be peeled off without leaving any adhesive residue. With back slit (Easy Peel) for easy removal of the label tapes from the protective film.Resistance to sunlight prevents fading or peeling of the labelExternal D1 ribbon cartridges made from 100 % recycled materialWater resistantTemperature resistant from -18 to 90 °C
Variants from €20.70*
Length:
15 m
|
Manufacturer Article Number:
1061
|
Width:
9 mm
Can be labelled:
Yes
|
Colour:
White
|
Length:
30 m
|
Manufacturer Article Number:
099.02.011
|
Material:
Paper
|
Max. temperature resistance:
110 °C
|
Min. temperature resistance:
-5 °C
|
Temperature resistance:
-5 ... 110 °C
|
Waterproof:
Yes
|
Width:
19 mm
White. Manufactured from paper with special resin adhesive that resists to moisture and most solvents. Can be used between -5 to 110 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces and peels off without leaving any sticky residue. Accepts writing from almost all pen types such as pencil, ball point pen, solvent ink marker etc. Markings remain absolutely legible under the most demanding laboratory conditions. Rolls of 30 m.
Capacity:
200 ml
|
Description:
Spray can, with dosing brush
|
GHS:
GHS02, GHS07, GHS09
|
Manufacturer Article Number:
1035478
|
Type:
SOLVENT 50 Super
SOLVENT 50 is a highly effective label solvent for the effortless removal of self-adhesive labels on the basis of natural orange terpenes. It works on the adhesive and quickly and gently dissolves adhesive labels on glass, porcelain, metal, wood, foil and cardboard. SOLVENT 50 also removes sticky residue of any kind, such as tar spots or glue residue from stickers. Check compatibility when using on plastics. Not suitable for polystyrene.SOLVENT 50 SUPER is the label remover with brush. The optimised formula has high dissolving capacity to remove paper labels and all kinds of adhesive residues.Hazardous Substance DataGHSSignal wordGefahrH-SatzH222, H229, H315, H319, H336, H411, H317P-SatzP102, P210, P211, P251, P261, P271, P410/412, P501-2UNNR1950SDSLink
Variants from €12.27*
Dimensions (WxL):
50 x 25 mm
|
Length:
25 mm
|
Manufacturer Article Number:
5040-0002
|
Material:
Nylon fabric
|
Type:
5040
|
Width:
50 mm
Durable, non-shrinking, plain cloth labels. Ideal for labelling cryoboxes. Supplied in packs of 10 sheets of labels with each sheet containing 20 labels.
Capacity:
200 ml
|
GHS:
GHS02, GHS07, GHS09
|
Manufacturer Article Number:
6040 01000
For easy removal of labels from files, appliances and plastic-coated materials. With capillary-tube applicator.Hazardous Substance DataGHSSignal wordGefahrH-SatzH222-H229, H315, H317, H336, H411P-SatzP251, P211, P280, P303+P361+P353, P304+P340, P312, P410+P412UNNR1950SDSLink
Colour:
Black on yellow
|
For:
Rhino™ 4200, 5200, 6000+
|
Length:
5.5 m
|
Manufacturer Article Number:
18432
|
Material:
Vinyl
|
Width:
12 mm
The label tape with industrial adhesive is suitable for versatile labelling applications and withstands UV light, extreme temperatures, chemicals, and moisture. With back slit for easy removal of the label tapes from the protective film.No smudging or fading of text thanks to thermal transfer printing technologyExternal ribbon cartridges made from 100 % recycled materialUL recognized as a component to UL 969Meet OSHA, ANSI, and ISO standardsREACH and RoHS compliantLabel tapes made of vinylTemperature resistant from -40 to 80 °C
Variants from €26.79*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*