Ahlstrom-Munksjö Germany GmbHBench protection paper, LabSorb
LabSorb is two-layered: The top layer is a quality filter paper to enable rapid absorption of spilt liquids. The bottom layer is polyethylene-coated and protects the surface underneath from contamination and damage.Water absorption:Surface weight:140g/m²Other formats and sizes are available on request.
Bel-Art ProductsBench protector, Labmat™
White. Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear. Highly absorbent upper surface. Flexible polyethylene film backing is non-skid and prevents soak-through of most solutions. Simply roll up and discard after contamination.
Cytiva Europe GmbHBenchkote surface protector®
The upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):Completely absorbs escaped liquidsPrevents spills from reaching the workbenchProtects against contaminationApplications:Surface protection for lab workbenches, trays or chemical cabinetsContamination protection, e. g. in isotope or bacteriological labsAdsorption of toxic or radioactive substancesHygienic protection in animal cagesAtmospheric regulation in humidity chambers
Saint GobainBytac® Bench protectors
Bytac® Bench protectors, FEP Film with Vinyl or Aluminum Backing. Inert to most chemicals - Non-stick; easy to clean - Use to resurface bench tops and line fume hoods. Contrasting work surface for viewing color changes during titrations. Protects surfaces against absorption of radioactive chemicals. Vinyl backing is recommended for all applications up to 93°C. Aluminium foil-backing is resistant to high temperatures up to 182°C for up to one hour.
Heathrow Scientific LLCHeat Sealer with Cutter
For sealing polyethylene or polypropylene bags, sheets or flat tubing from 0.01 to 0.8 mm thickSliding blade removes excess material 19 mm from the seal.Timing knob ensures safe sealingHeating element measures 310 mm long and is only hot when sealingScope of supply: 2 extra blades, 2 extra heating elements and 2 extra PTFE cloths
Rische + Herfurth GmbHHeat sealers polystar® 243
For welding all polyethylene, polypropylene, cellulose or polyamide foils up to a thickness of 2 x 0.25 mm. Expandable with a plug-in table and a film roll-off device. M model sealers have an additional holding magnet as well as a welding and cooling automatic.SpecificationsSealing length:250 mmSealing width:1.5 mmPower consumption: Power output:0,6 A / 1,2 A* 0,14 kWh / 0,28 kWh*Dimensions:420 x 120 x 135 mmPower supply:230 V, 50 Hz*M-models
Rische + Herfurth GmbHHeat sealers polystar® 244 / 245
For germ-free welding with sterile foil. The 8 mm wide weld provides optimal protection and prevents the penetration of bacteria into the sterile packaging. The devices work with the heat pulse method. Expandable with a plug-in table and a film roll-off device.SpecificationsSealing length:250 mmSealing width:8 mmPower consumption:0,3 kWhDimensions:425 x 120 x 135 mmPower supply:230 V, 50 Hz
Rische + Herfurth GmbHHeat sealers polystar® 423 M / 583
For welding all polyethylene, polypropylene, cellulose or polyamide foils up to a thickness of 2 x 0.25 mm. Expandable with a plug-in table and a film roll-off device. With cutting device and double-sided heating tape clamping device. M model sealers have an additional holding magnet as well as a welding and cooling automatic.SpecificationsSealing length:440 mm / 600 mmSealing width:1.5 mmPower consumption: Power output:1.3 A 0.29 kWh / 0.3 kWhDimensions:720 x 120 x 135 mm / 880 x 120 x 135 mmPower supply:230 V, 50 Hz
Rische + Herfurth GmbHImpulse heat sealing tongs polystar® 120 GE
Double impulse heating. LED readout allows a visual check on the sealing progress. Pressure switch triggers the welding process. A special pressure switch for generating the heat impulse guarantees constant welding results. Includes 3m connection cable.* Seal length max. (mm)
Thermo Elect.LED GmbH (Nalge)Lab Soakers Nalgene™ VERSI-DRY®, Super, 1050ml/m²
Paper with PE backers. Absorbs 1050ml/m². With a skid-resistant, waterproof, chemical-resistant polyethylene backing that makes spill containment easy. Thousands of Thirsty Cells™ quickly absorb spills and cushion breakable labware. Sized for benchtop, floor, and fume hood. Use as a tray, drawer or shelf liner or to wipe up spills. Includes durable cloth-like top layer that won't fall apart when wet, can be used as a floor soaker.
Thermo Elect.LED GmbH (Nalge)Lab Soakers Standard Nalgene™ VERSI-DRY®, 750ml/m²
Paper with PE backing. Absorbs 750ml/m². With a skid-resistant, waterproof, chemical-resistant polyethylene backing that makes spill containment easy. Thousands of Thirsty Cells™ quickly absorb spills and cushion breakable labware. Use as a tray, drawer or shelf liner or to wipe up spills.
Heathrow Scientific LLCLaboratory mats Workstation Lab Mat, silicone
Non-slip Laboratory mats with 2 different sides for organising and thus simplyfying workflow processes. One side with a completely flat surface and one side with a combination of gridded and flat surface. The gridded area avoids unwanted movement of small partsIdeal for all laboratories and more specialised areas such as cold rooms or areas with high sterility requirements such as clean rooms. Dimensions (W x D x H): 305 x 379 x 2 mmProtection of the work bench from hot items up to 200 °CLip around the edge can hold approx. 250 ml of liquidReusableChemically resistantDishwasher safeFood safeNoise dampeningCan be rolled upAutoclavable at 121 °C for 15 minutes
Your watch lists