Filter
Filter
Anton Paar Germany GmbH
Accessories for Density meters DMA 35
Description:
Calibration according to ISO 17025
€86.00*
Anton Paar Germany GmbH
Accessories for Density meters DMA 501
Description:
Peristaltic pump highly resistant
€675.00*
GECO Gering
Acid tester for batteries,1.10-1.30
Type:
Battery hydrometer
Battery acid tester 1.10 to 1.30.Boxed complete with glass tube, rubber bulb and hydrometer.
From
€20.90*
GECO Gering
Alcoholometer 0 - 100 %
Type:
Alcoholometer
0 to 100% at reference temperature: 20°C.Without thermometer.
From
€16.60*
GECO Gering
Alcoholometer according to E.E. 76/765
Length mm:
330
|
Measuring range:
0 ... 5 %
|
Scale:
0.1
According to E.E. 76/765. Class II, ethanol % vol. Suitable for official testing. Reference temperature: 20 °C. With thermometer.
From
€98.90*
Ludwig Schneider GmbH & Co.KG
Alcoholometer, Richter-Tralles type
Length mm:
260
|
Type:
Alcoholometer
0 to 100 % mas / % Vol at reference temperature: +20°C.Without thermometer. With DAkkS calibration certificate and 3 checkpoints.Packed in a square plastic sleeve.
From
€219.35*
Ludwig Schneider GmbH & Co.KG
ASTM Hydrometers
Length mm:
380
|
Measuring range kg/m3:
600 ... 650
|
Reference temperature °C:
15
|
Scale:
0.5
Precision hydrometers acc. to ASTM E2995-14 for determination of density for mineral oil, with thermometer "mercury free".Hydrometer with thermometer, error-limit for density: ± 0,5 kg/m³, with thermometer -20 to +65°C in 1°C, blue filling, error-limit ± 1°C. With works calibration on request. With blue, environmental friendly filling of thermometers. Each item packed in plasic tubes for breakage protection.
From
€73.97*
Ludwig Schneider GmbH & Co.KG
ASTM Hydrometers, with works calibration and 3 checkpoints
Length mm:
380
|
Measuring range kg/m3:
850 ... 900
|
Reference temperature °C:
15
|
Scale:
0.5
Precision hydrometers acc. to ASTM E2995-14 for determination of density for mineral oil, with thermometer "mercury free".Hydrometer with thermometer, error-limit for density: ± 0,5 kg/m³, with thermometer -20 to +65°C in 1°C, blue filling, error-limit ± 1°C. With blue, environmental friendly filling of thermometers. Each item packed in plasic tubes for breakage protection.
From
€314.16*
Mettler-Toledo GmbH (Waagen)
Combined density and refractometry index standards
Density at 20 °C g/cm3:
0.998
|
Refractive Index at 20 °C:
1.333
|
Type:
Water
For density and refractometer calibration in one step. Bottles can directly be used in SC1 and SC30 automation units. Coded with barcodes for fully automatic verification procedure in METTLER-TOLEDO LiQC systems.
€171.00*
GECO Gering
Density hydrometers without thermometer
Length mm:
160
|
Measuring range g / ml:
0.600 ... 0.660
|
Subdivisions g / ml:
0,001
Shot poised. Without thermometer. Reference temperature: +20°C.Further models availlable on request.
From
€15.20*
ISOLAB Laborgeräte GmbH
Density bottle 5 ml
Capacity ml:
5
For easy differentiation both the body and the stopper carries the same identification code number. Nominal volume and inscriptions are printed with blue enamel. Manufactured according to ISO 3507 standard.
€25.34*
BRAND GMBH + CO.KG
Density bottles, Borosilicate glass 3.3., uncalibrated
Nom. capacity cm³:
5
All BLAUBRAND® density bottles are supplied with one accompanying individual certificate in the original packaging. On request, they are also available with a DAkkS calibration certificate.DIN ISO 3507,Gay-Lussac typeStopper NS 10/19 with capillaryTop of stopper ground and polishedNominal capacity printed on the bottom
From
€29.10*
Amarell GmbH & Co KG
Density hydrometers without thermometer
Length mm:
300
|
Measuring range g/cm3:
1.000 ... 1.100
|
Reference temperature °C:
20
|
Scale g/cm³:
0.001
Scale 0,100 g/cm³, paper scale, shot weighted body, hydrometer accuracy ±1 scale division, in transparent plastic case. Reading below.* Complete set with 14 insturments in stuffed case.
From
€11.09*
Amarell GmbH & Co KG
Density hydrometers without thermometer
Length mm:
280 ... 300
|
Measuring range g/cm3:
2.000 ... 2.500
|
Reference temperature °C:
20
|
Scale g/cm³:
0.005
Scale 0,300 up to 0,500 g/cm³, paper scale, shot weighted body, hydrometer accuracy ±1 scale division, capilary round, in transparent plastic case. Reading below.
From
€11.20*
Anton Paar Germany GmbH
Density meter DMA 501
Type:
DMA 501
Density meter for measuring of chemicals, pharmaceuticals, cosmetics and food. Suitable for samples with difficult properties like paste, inhomogeneous, sedimenting and particulate samples or aerosol sprays.The DMA 501 contains all relevant concentration tables and formulas for calculating product specific parameters and the results are displayed in the appropriate unit. Automatic filling and measuring with the optional available industrial peristaltic pump possible.Camera image of the measuring cell (U-view™) for viewing the correct sample filling, whereby potential filling errors due to inhomogeneous samples, gas bubbles or paticles are automatically detected with the FillingCheck™ functionSplash-proof frontFanless temperature control of the sampleUser-defined layouts of the measurement display with result outputs for individual requirementsDocumentation and traceability of dataElimination of external influences through the implementation of a standardised sample handlingIntegrated temperature and humidity sensorIntegrated pressure sensor for adjustmentAutomatic full-range viscosity correction of results3 years warrantySpecificationsDensity measuring range / Accuracy:0 ... 3 g/cm³ / 0.001 g/cm³Reproducibility standard deviation (acc. to ISO 5725):0.0004 g/cm³Minimal sample volume:approx. 1 mlTemperature range / Accuracy:15 ... 40 °C / 0.3 °CDisplay:7 inches, TFT WVGA (800 x 480 Px), PCAP touchscreenInterfaces:1 x Ethernet, 3 x USB, 1 x RS-232Dimensions (W x D x H):265 x 375 x 180 mmWeight:13,5 kgPower supply:100 .. 240 V, 47/63 Hz, 24 V, 3 A
€6,730.00*
Xylem Analytics Germany
Density meter DSG
Accuracy:
±0.0001 g/cm3
|
Accuracy temperature:
±0.05 °C
|
Accuracy temperature Number:
0.05 °C
|
Depth:
290 mm
|
Dimensions (WxDxH):
430 x 290 x 300 mm
|
Height:
300 mm
|
Max. temperature:
95 °C
|
Max. voltage:
265 V AC
|
Measuring range:
0 ... 3 g/cm3
|
Min. temperature:
10 °C
|
Min. voltage:
90 V AC
|
Power supply:
90 ... 265 V AC, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Resolution:
0.0001 g/cm3
|
Sample volume ml:
2
|
Temperature:
10 ... 95 °C
|
Type:
DSG40
|
Type of auxiliary energy:
Mains connection
|
Weight:
9.1 kg
|
Width:
430 mm
Precise measuring device for determining the density of liquids for use in laboratories and factories with high sample throughput.Measurement according to the oscillating U-tube principle7" colour touchscreen and intuitive user interfaceMenu structure with method system simplifies the performance of routine analysesMethods: Density, relative density, sucrose %w/w (°Brix), ethanol (%w/w, %v/v), customised scalesStandard Luer connections for sample applicationPeltier temperature control for rapid temperature stabilizationPowerful air pump for thorough cleaningData memory for over 100000 readingsUSB, LAN, and serial interfaceCompatible with FDA regulation 21 CFR Part 11Detailed test protocols (audit trail)
€17,499.00*
Anton Paar Germany GmbH
Density meters DMA 35
Type:
DMA 35 Standard
Portable, digital measuring device for the determination of density, relative density and concentration. DMA 35 EX and DMA 35 EX Petrol are certified according to ATEX for applications in hazardous environments.On-site measurements for fast reactionsOscillator principle (borosilicate glass oscillator)Sample filling via manual filling pump or syringeComplete data control through traceabilityViscosity correction for measurements also on highly viscous samplesGesture control for one-handed measurementRecognition of results outside the tolerance limitMeasuring of density, relative density, alcohol concentration, sugar/extraction concentration, API functions, H2SO4 concentration, ten programmable custom-specific measuring unitsRobust case with exchangeable cell3 years warrantyScope of supply: Density meter, filling tube, adapter for syringe filling, syringes, transportation case, rubber protection for measuring cell, 3 x batteries, allen key, instructions.SpecificationDensity range:
Resolution:
Accuracy:0 ... 3 g/cm3
0.0001 g/cm3
±0.001 g/cm3Sample temperature range:
Temperature measurement range:0 ... 100 °C
0 ... 40 °CResolution:
Accuracy:0.1 °C
±0.2 °CReproducibility standard deviation (acc. to ISO 5725):0.0007 g/cm3Sample volume:2 mlData memory:1024 measurement results, 250 sample IDs, 30 measuring methodsDisplay:coloured LCD, self-rotatingInterfaces:Bluetooth®, RFIDDimensions (W x D x H):103 x 245 x 126 mmWeight:660 gPower supply:3 x Mignon alkaline batteries, 1.5 V LR06 AAIP code:IP 54
€3,224.00*
Ludwig Schneider GmbH & Co.KG
Hydrometer
Length mm:
270
|
Measuring range g/cm3:
1.050 ... 1.100
|
Reference temperature °C:
20
|
Scale g/cm³:
0.001
Acc. to DIN 12791. Error limit ±0.001 g/cm3.Packed in a square plastic sleeve.
From
€28.78*
VITLAB GmbH
Hydrometer cylinders, PP
Capacity ml:
500
|
Grad. ml:
5,0
|
Height mm:
351
|
Ø mm:
73
Highly transparent. For density measurements using a hydrometer. Hydrometer can be read through the overflow vessel with a completely filled cylinder.With spoutMolded graduations and ring marks at the primary scale pointsCalibrated to contain (IN)Hexagonal base with bottom studs
€35.64*
GECO Gering
Hydrometers Dr. Ammer
Length mm:
290
|
Measuring range Bé:
-1 / 0 / +1
Dr. Ammer type.For testing boiler feedwater.With integral thermometer and temperature correction.Reference temperature +20°C.
From
€75.20*
GECO Gering
Hydrometer, mineral oil, adjustable
Length mm:
390
|
Measuring range g / ml:
0.610 ... 0.700
|
Subdivisions g / ml:
0,001
With -10 to +60°C thermometer.Adjustable.Reference temperature: +15°C.
From
€59.90*
GECO Gering
Hydrometer jars, glass
Height:
400 mm
|
Ø:
40 mm
Hydrometer jars made of glass.
From
€24.30*
Ludwig Schneider GmbH & Co.KG
Hydrometer, Casagrande
Length mm:
350
|
Measuring range g/cm3:
0.995 ... 1.030
|
Reference temperature °C:
20
|
Scale g/cm³:
0.0005
Casagrande type, acc. to DIN 18123 / BS 1377. Error limit of ±0.0005 g/cm3.Packed in a square plastic sleeve.
From
€47.08*
GECO Gering
Hydrometer,for Ca(OH)²,without thermometer
Length mm:
300
|
Measuring range:
0 ... 340 g/l
For lime water Ca(OH)2.Without thermometer.Reference temperature: +20°C.
From
€28.00*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.32*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.32*
Your watch lists
Loading...