Clamping range:
1 ... 10 mm
|
Depth:
196 mm
|
Dimensions (WxDxH):
80 x 196 x 215 mm
|
Display:
Scale
|
Height:
215 mm
|
IP code:
IP 40
|
Manufacturer Article Number:
SA201A0151
|
Max. Viscosity:
25000 mPa·s
|
Max. Viscosity:
25000 mPa·s
|
Max. clamping width:
10 mm
|
Max. speed:
2000 1/min
|
Max. stirring capacity:
25 l
|
Max. torque:
40 Ncm
|
Max. voltage:
230 V
|
Min. clamping width:
1 mm
|
Min. speed:
50 1/min
|
Min. voltage:
110 V
|
Plug type:
EU
|
Power supply:
110 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
120 W
|
Speed:
50 ... 2,000 1/min
|
Type:
LS System
|
Type of auxiliary energy:
Mains connection
|
Warranty:
3 years
|
Weight:
2.3 kg
|
Width:
80 mm
|
With connection ext. temperature sensor:
No
|
With timer:
No
Robust overhead stirrer for general tasks. Stirs media with low to medium viscosity up to 25000 mPas.Electronic speed controlGentle start-up to avoid splashing and blisteringChemical resistant and corrosion protected housingBlocking detection with switch-off functionNo tool required for assembly of the stirring toolScope of supply: Overhead stirrer, stand, double clamp, stirring shaft with fixed blade
Accuracy speed:
±1 %
|
Accuracy speed Number:
1 %
|
Clamping range:
2.5 ... 10.5 mm
|
Depth:
247 mm
|
Dimensions (WxDxH):
86 x 247 x 350 mm
|
Display:
Digital
|
Height:
350 mm
|
IP code:
IP 54
|
Manufacturer Article Number:
501-61010-03
|
Max. Viscosity:
60000 mPa·s
|
Max. clamping width:
10.5 mm
|
Max. speed:
2000 1/min
|
Max. stirring capacity:
50 l
|
Max. torque:
100 Ncm
|
Max. voltage:
240 V
|
Min. clamping width:
2.5 mm
|
Min. speed:
10 1/min
|
Min. voltage:
100 V
|
Plug type:
UK
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
90 W
|
Speed:
10 ... 2,000 1/min
|
Type:
Hei-TORQUE Expert 100
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41103810
|
Weight:
4.4 kg
|
Width:
86 mm
|
With connection ext. temperature sensor:
No
|
With timer:
No
Ideal for all standard stirring tasks. They are designed to mix and disperse media that require non-reproducible results in high-viscosity applications.Indication of torque tendencies to monitor viscosity changesDigital 2.4" display for ease of operationConstant speed even under changing loadsSafe start and stop of operation via slide touch panelMinimum noise level at maximum power (
ATEX certification:
Ex II 2G Ex h IIC T4 Gb
|
ATEX certification:
Ex II 2G Ex h IIC T4 Gb
|
Capacity max. litres:
3
|
Compressed air consumption:
260 l/min
|
Display:
Analogue
|
Idle speed:
15000 1/min
|
Manufacturer Article Number:
40 26446 00248 0
|
Max. Viscosity:
1000 mPa·s
|
Max. operating pressure:
6 bar
|
Max. stirring capacity:
3 l
|
Nominal torque:
0.3 Ncm
|
Off-load speed rpm.:
15000
|
Operating press bar:
6 bar
|
Power W:
200
|
Rated capacity:
200 W
|
Torque Nm:
0.3
|
Type:
PLR 10T
|
Type:
PLR 10T*
|
Viscosity range mPas:
1000
PLR compressed air laboratory stirrers are designed for all kinds of standard mixing tasks. The vane type, air-driven motor offers a high power density and is significantly lighter and smaller than an equivalent electric motor.General specifications:operating pressure max. 6 barair consumption 260 l/min. at 6 barpower output 200 W at 6 barclockwise rotationATEX certificationBasic models include:all-stainless steel housingcontinuously adjustable speed control valvesupport arm diam. 14 mmsnap connection for NW 5output shaft L x diam. 26 x 10 mmThe viscosity data are intended as a guideline.
Clamping range:
1 ... 10 mm
|
Depth:
196 mm
|
Dimensions (WxDxH):
80 x 196 x 215 mm
|
Display:
Digital
|
Height:
215 mm
|
IP code:
IP 40
|
Manufacturer Article Number:
SA201A0155
|
Max. Viscosity:
25000 mPa·s
|
Max. Viscosity:
25000 mPa·s
|
Max. clamping width:
10 mm
|
Max. speed:
2000 1/min
|
Max. stirring capacity:
25 l
|
Max. torque:
40 Ncm
|
Max. voltage:
230 V
|
Min. clamping width:
1 mm
|
Min. speed:
50 1/min
|
Min. voltage:
110 V
|
Plug type:
EU
|
Power supply:
110 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
120 W
|
Speed:
50 ... 2,000 1/min
|
Type:
DLS System
|
Type of auxiliary energy:
Mains connection
|
Warranty:
3 years
|
Weight:
2.5 kg
|
Width:
80 mm
|
With connection ext. temperature sensor:
No
|
With timer:
Yes
Powerful overhead stirrer with display for stirring of low to medium viscosity media up to 25000 mPas.Stable torque over the entire speed range with automatic compensation on viscosity changesElectronic speed controlGentle start-up to avoid splashing and blisteringChemical resistant and corrosion protected housingBlocking detection with switch-off functionNo tool required for assembly of the stirring toolDisplay shows all important parametersTimer with automatic power-off (up to 999 min 59 sec)Scope of supply: Overhead stirrer, stand, double clamp, stirring shaft with propeller
Flow:
Radial
|
Manufacturer Article Number:
0001243300
|
Stirring head Ø:
40 mm
|
Type:
R 1402
|
Type of stirrer:
Dissolver stirrers
|
UNSPSC:
41-10-38-10
Length:
400 mm
|
Manufacturer Article Number:
6263458
|
Material:
Stainless steel
|
Paddle diam.:
67 mm
|
Stirring rotor Ø:
8 mm
|
Type of stirrer:
Paddle stirrers
Paddle stirrer for gentle mixing and homogenising of media at low to medium speeds. The paddle creates a tangential flow pattern and causes little turbulence.
Adjustable height:
615 ... 1,015 mm
|
Depth:
430 mm
|
Dimensions (W x D x H) mm:
462 x 430 x 1015
|
Dimensions (WxD):
461 x 430 mm
|
For:
DLS/DLH/LH/LS/ES/PW/OHS Digital/OHS Advance
|
Manufacturer Article Number:
A00000369
|
Max. adjustable height:
1015 mm
|
Min. adjustable height:
615 mm
|
Rod diam. mm:
34
|
Type:
Telescopic stand
|
Width:
461 mm
Suitable for VELP overhead stirrers. For stable mounting and low-vibration operation.
Clamping range:
0.5 ... 10 mm
|
Depth:
231 mm
|
Dimensions (WxDxH):
91 x 231 x 297 mm
|
Display:
Digital
|
Height:
297 mm
|
IP code:
IP 40
|
Manufacturer Article Number:
0003992000
|
Max. Viscosity:
100000 mPa·s
|
Max. clamping width:
10 mm
|
Max. speed:
2000 1/min
|
Max. stirring capacity:
100 l
|
Max. temperature:
350 °C
|
Max. torque:
200 Ncm
|
Max. voltage:
230 V
|
Min. clamping width:
0.5 mm
|
Min. speed:
6 1/min
|
Min. temperature:
-10 °C
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
130 W
|
Speed:
6 ... 2,000 1/min
|
Temperature:
-10 ... 350 °C
|
Type:
EUROSTAR 200 control
|
Type of auxiliary energy:
Mains connection
|
Weight:
4.9 kg
|
Width:
91 mm
|
With connection ext. temperature sensor:
Yes
|
With timer:
Yes
Extremely powerful laboratory stirrer for highly viscous applications for quantities up to 100 l (H2O). It is designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/6 to 2000 rpm (two speed ranges). The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters. An integrated torque trend display is provided for the measurement of viscosity changes. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.Multilingual TFT displayDetachable remote controlProgrammable functionsIntegrated temperature measurementInterval operationTimer functionAdjustable safety circuitLocked functionInfinitely adjustable speedOverload protectionShort-term overload operation
Dimensions mm:
Ø 33
|
Length:
400 mm
|
Manufacturer Article Number:
509-31000-00
|
Material:
V 2A
|
Material:
Stainless steel
|
Stirring head Ø:
33 mm
|
Stirring rotor Ø:
8 mm
|
Type:
Propeller stirrer PR 32*
|
Type:
PR 31
|
Type of stirrer:
Propeller stirrers
These impellers are recommended for applications which require an average or high speedFor mixing products with low or medium viscosityExcellent mixing properties for homogenisation and suspensionsThese models create an axial flow
Adjustable height:
620 ... 1,010 mm
|
Depth:
420 mm
|
Dimensions (WxD):
460 x 420 mm
|
Manufacturer Article Number:
0001412100
|
Max. adjustable height:
1010 mm
|
Min. adjustable height:
620 mm
|
Type:
R 2723
|
Width:
460 mm
Stable stands with H-shaped base. Stands have a levelling screw to compensate for unevenness on the laboratory bench. Max. load 10 kg.
Dimensions mm:
60 x 40 x 5
|
Length:
350 mm
|
Manufacturer Article Number:
509-19000-10
|
Material:
PTFE
|
Material:
PTFE
|
Stirring head Ø:
60 mm
|
Stirring rotor Ø:
8 mm
|
Type:
AR 19
|
Type:
Anchor stirrer AR 19
|
Type of stirrer:
Anchor stirrer
These impellers are recommended for applications which require a low speedFor mixing products with medium or high viscosity
Dimensions mm:
Ø 29
|
Flow:
Radial
|
Length:
400 mm
|
Manufacturer Article Number:
509-20000-00
|
Material:
V 2A
|
Material:
Stainless steel
|
Stirring head Ø:
28 mm
|
Stirring rotor Ø:
8 mm
|
Type:
Turbine stirrer TR 20
|
Type:
TR 20
|
Type of stirrer:
Turbine stirrer
These impellers are recommended for applications which require an average speedFor mixing products with average viscosity up to
Flow:
Axial
|
Length:
400 mm
|
Manufacturer Article Number:
6263454
|
Material:
Stainless steel
|
No. of stirring blades:
4
|
Stirring head Ø:
50 mm
|
Stirring rotor Ø:
8 mm
|
Type of stirrer:
Propeller stirrers
Propeller stirrer for mixing and homogenising media at medium to high speeds. The propeller generates an axial flow pattern.
Variants from €57.91*
Accuracy speed:
±3 1/min
|
Accuracy speed Number:
3 1/min
|
Clamping range:
0.5 ... 10 mm
|
Depth:
186 mm
|
Dimensions (WxDxH):
83 x 186 x 220 mm
|
Display:
Digital
|
Height:
220 mm
|
IP code:
IP 21
|
Manufacturer Article Number:
6263427
|
Max. Viscosity:
10000 mPa·s
|
Max. clamping width:
10 mm
|
Max. speed:
2200 1/min
|
Max. stirring capacity:
20 l
|
Max. torque:
40 Ncm
|
Max. voltage:
240 V
|
Min. clamping width:
0.5 mm
|
Min. speed:
50 1/min
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
70 W
|
Speed:
50 ... 2,200 1/min
|
Type:
LLG-uniSTIRRER OH2 pro
|
Type of auxiliary energy:
Mains connection
|
Warranty:
3 years
|
Weight:
2.8 kg
|
Width:
83 mm
|
With timer:
No
Cost-effective, universal laboratory stirrer for simple stirring tasks up to 20 litres (H2O). An electronic safety circuit guarantees that the appliance is switched off in the event of a fault or overload. Microprocessor control continuously synchronises set and actual speed. This means that the speed remains constant even if the viscosity of the medium changes.Brushless, maintenance-free motorRobust housingDigital display of speed and torqueInfinitely adjustable speedOverload protectionNon-slip matQuick-release chuck enables simple stirrer shaft change without toolsSilicone cover protects drill chuck and motor from erosive vapours and splashesRS232 interfaceScope of supply: Overhead stirrer, stand, non-slip mat, 4-blade propeller stirrer
Variants from €993.00*
Clamping range:
3 ... 16 mm
|
Depth:
268 mm
|
Dimensions (WxDxH):
114 x 268 x 345 mm
|
Display:
Digital
|
Height:
345 mm
|
IP code:
IP 42
|
Manufacturer Article Number:
0004214100
|
Max. Viscosity:
100000 mPa·s
|
Max. clamping width:
16 mm
|
Max. speed:
2000 1/min
|
Max. stirring capacity:
150 l
|
Max. temperature:
350 °C
|
Max. torque:
400 Ncm
|
Max. voltage:
230 V
|
Min. clamping width:
3 mm
|
Min. speed:
6 1/min
|
Min. temperature:
-10 °C
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
226 W
|
Speed:
6 ... 2,000 1/min
|
Temperature:
-10 ... 350 °C
|
Type:
EUROSTAR 400 control
|
Type of auxiliary energy:
Mains connection
|
Weight:
8.8 kg
|
Width:
114 mm
|
With connection ext. temperature sensor:
Yes
|
With timer:
Yes
Powerful laboratory stirrer for highly viscous applications and intensive mixing for quantities up to 150 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/6 to 2000 rpm (two speed ranges). The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters. An integrated torque trend display is provided for the measurement of viscosity changes. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.Infinitely adjustable speedPush-through agitator shaftsOverload protectionShort-term overload operationSlim casingMultilingual TFT displayProgrammable functionsIntegrated temperature measurementInterval operationTimer functionAdjustable safety circuitLocked functionConnection for external temperature sensorScope of supply: Overhead stirrer, temperature sensor H 67.60, WiCo holder WH 11
Flow:
Radial
|
Length:
400 mm
|
Manufacturer Article Number:
6263459
|
Material:
Stainless steel
|
No. of stirring blades:
2
|
Stirring head Ø:
80 mm
|
Stirring rotor Ø:
8 mm
|
Type of stirrer:
Centrifugal stirrers
Centrifugal stirrer for mixing and homogenising media at medium to high speeds. The blades align themselves during stirring and create a radial flow pattern. Ideal for stirring in vessels with a narrow neck.
Dimensions mm:
65 x 18 x 3
|
Length:
350 mm
|
Manufacturer Article Number:
509-18000-10
|
Material:
PTFE
|
Material:
PTFE
|
Stirring head Ø:
65 mm
|
Stirring rotor Ø:
8 mm
|
Type:
Half-moon stirrer HR 18
|
Type:
HR 18
These impellers are recommended for applications which require an average speedFor mixing products with average viscosityModel HR 18 come with tilting agitator blades
Dimensions mm:
Ø 58
|
Flow:
Axial
|
Length:
400 mm
|
Manufacturer Article Number:
509-30000-00
|
Material:
V 2A
|
Material:
Stainless steel
|
Stirring head Ø:
58 mm
|
Stirring rotor Ø:
8 mm
|
Type:
PR 30
|
Type:
Propeller stirrer PR 30
|
Type of stirrer:
Propeller stirrers
These impellers are recommended for applications which require an average or high speedFor mixing products with low or medium viscosityExcellent mixing properties for homogenisation and suspensionsThese models create an axial flow
Accuracy speed:
±1 %
|
Accuracy speed Number:
1 %
|
Clamping range:
2.5 ... 10.5 mm
|
Depth:
247 mm
|
Dimensions (WxDxH):
86 x 247 x 350 mm
|
Display:
Digital
|
Height:
350 mm
|
IP code:
IP 54
|
Manufacturer Article Number:
501-62029-00
|
Max. Viscosity:
100000 mPa·s
|
Max. clamping width:
10.5 mm
|
Max. speed:
2000 1/min
|
Max. stirring capacity:
50 l
|
Max. torque:
200 Ncm
|
Max. voltage:
240 V
|
Min. clamping width:
2.5 mm
|
Min. speed:
10 1/min
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
120 W
|
Speed:
10 ... 2,000 1/min
|
Type:
Hei-TORQUE Gold 2 package
|
Type of auxiliary energy:
Mains connection
|
Weight:
5.1 kg
|
Width:
86 mm
|
With timer:
Yes
Ideal for demanding tasks which have to be reproducible and documentable. The large number of additional features and operation modes allows for a perfect adjustment to your individual application.Accurate torque indication shows any viscosity changeConstant speed even under changing loadsRotation direction changeableDigital 3.2" display with easy operation (ramp function, saving of preprogrammed profiles, interval operation, displays rpm and torque graph life, timer with countdown and real time)All performance-related parameters can be set individually (intensity of the start operation, rotational and torque speed limit)Safe start and stop of operation via slide touch panelMinimum noise level at maximum power (
Manufacturer Article Number:
99968-16
|
Type:
Small Paddle stirrer
For use with 9.950 401 and 9.950 402 shafts.
Variants from €62.81*
Length mm:
350
|
Manufacturer Article Number:
C 377-08
|
Shaft diam. mm:
8
|
To fit chuck diam. mm:
6.5
|
UNSPSC:
40-16-17-01
|
Ø Paddle mm:
90
With PTFE-coated, stainless steel shaft.
Variants from €137.20*
Description:
Maxi propeller-three-bladed
|
Length mm:
26
|
Manufacturer Article Number:
C 441-16
|
Paddle diam. mm:
200
|
Shaft diam. mm:
16
|
UNSPSC:
41-12-18-02
Useful extension to the existing range of Bola stirrer shafts. The additional blades can optionally be fixed in your preferred position on every stirrer shaft with diameter 8,10 or 16 mm (a flat spanner is included). The stirrer blades are entirely made of PTFE, the mounting devices are made of a special PTFE-compound. A high chemical and thermical (-200 to +250 °C) resistance is assured. This "building block system" allows the user to define a stirrer of their own special requirements.
Variants from €62.40*
Clamping range:
0.5 ... 10 mm
|
Depth:
208 mm
|
Dimensions (WxDxH):
86 x 208 x 248 mm
|
Display:
Digital
|
Height:
248 mm
|
IP code:
IP 42
|
Manufacturer Article Number:
0004238100
|
Max. Viscosity:
70000 mPa·s
|
Max. clamping width:
10 mm
|
Max. speed:
1300 1/min
|
Max. stirring capacity:
100 l
|
Max. torque:
100 Ncm
|
Max. voltage:
230 V
|
Min. clamping width:
0.5 mm
|
Min. speed:
0 1/min
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
186 W
|
Speed:
0 ... 1,300 1/min
|
Type:
EUROSTAR 100 digital
|
Type of auxiliary energy:
Mains connection
|
Weight:
3.9 kg
|
Width:
86 mm
|
With timer:
No
Powerful laboratory stirrer for highly viscous applications and intensive mixing for quantities up to 100 l (H2O). It automatically adjusts the speed through microprocessor controlled technology. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.Digital speed displayInfinitely adjustable speedPush-through agitator shaftsOverload protectionShort-term overload operationSlim casingQuiet operationError code display
Length mm:
1500
|
Manufacturer Article Number:
42-808-001+F0002
|
Thread M:
10
|
UNSPSC:
41-10-38-00
|
Ø mm:
10
Stainless steel 1.4301. With screwthread fitting as outlined below.
Variants from €11.40*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*