Manufacturer Article Number:
SG00006014
|
Material:
Polyester
|
Max. temperature resistance:
150 °C
|
Mesh size:
1 µm
|
Min. temperature resistance:
-75 °C
|
Temperature resistance:
-75 ... 150 °C
Thermo-fixed PE mesh with temperature resistance from -75 °C to 150 °C (short). For long term heating max. 125 °C. Resistant to acids but not alkalis.Dimensions: Minimum width 102 cm, Length 100 cm.Other sizes available on request.
Variants from €153.67*
Manufacturer Article Number:
SG00020139
|
Material:
PA
|
Max. temperature resistance:
115 °C
|
Mesh size:
1 µm
|
Min. temperature resistance:
-40 °C
|
Temperature resistance:
-40 ... 115 °C
Thermo-fixed Polyamide (Nylon) mesh is temperature stable from -40 °C to 115 °C. In water from 95 °C to 100 °C. Stability in acids is limited and dependent on concentration and temperature. Nylon exhibits outstanding stability in alkalis, including sodium and potassium solutions. Its chemical behaviour with respect to organic solvents is moderate to good. Minimum mesh width: 102 cm, Length: 1 mOther sizes available on request.
Variants from €99.98*
Description:
Machine cover
|
Manufacturer Article Number:
205923982
Variants from €6.00*
Description:
Analytical Sieve Test Sand
|
Manufacturer Article Number:
ASK-SAND
Test materials can be used to check analytical sieves between the schedulded calibration dates and to demonstrate the presence of the required properties, as well as the suitability of analytical sieves. A test material for analytical sieves with frequent mesh widths ( 2.0mm - 1.0mm - 0.5mm - 0.25mm - 0.125mm ).Pack of 3 bottles, 202g eachGrain size : from 0.125mm to 2.00mmData sheet for the use of traceability for analytical sievesEach bottle contains a mixture of different sizes.
Depth int.:
300 mm
|
Display:
Analogue
|
Ext. depth:
340 mm
|
Ext. height:
500 mm
|
Ext. width:
540 mm
|
External dimensions (WxDxH):
540 x 340 x 500 mm
|
Heating capacity:
1450 W
|
Height int.:
300 mm
|
IP code:
IP 32
|
Int. width:
500 mm
|
Internal dimensions (WxDxH):
500 x 300 x 300 mm
|
Manufacturer Article Number:
143
|
Max. temperature:
80 °C
|
Max. voltage:
230 V
|
Min. temperature:
30 °C
|
Nominal capacity:
45 l
|
Operation:
Rotary knob
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Temperature:
30 ... 80 °C
|
Type:
RK 1028 CH
|
Type of auxiliary energy:
Mains connection
|
Type of display:
Without display
|
Ultrasonic frequency:
35 kHz
|
Ultrasonic power:
300 W
|
Warranty:
2 years
|
Weight:
23.7 kg
|
With stopcock:
Yes
Heavy duty ultrasonic baths for cleaning or sample treatment in aqueous liquids. Suitable for laboratory and respiratory protection area, industry, workshop and service area.Stainless steel tank and housingDrip water protectedRadio shieldedTimer from 1 to 15 min or continuousWith integral tank drain tap (G 1/2) for easy emptyingWith handles on both sidesFor 5 test sieves with 200 mm diameterPlease order sieve holder SH 28 C separately.
Depth int.:
300 mm
|
Display:
Analogue
|
Ext. depth:
340 mm
|
Ext. height:
500 mm
|
Ext. width:
540 mm
|
External dimensions (WxDxH):
540 x 340 x 500 mm
|
Height int.:
300 mm
|
IP code:
IP 32
|
Int. width:
500 mm
|
Internal dimensions (WxDxH):
500 x 300 x 300 mm
|
Manufacturer Article Number:
661
|
Max. voltage:
230 V
|
Nominal capacity:
45 l
|
Operation:
Rotary knob
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
RK 1028 C
|
Type of auxiliary energy:
Mains connection
|
Type of display:
Without display
|
Ultrasonic frequency:
35 kHz
|
Ultrasonic power:
500 W
|
Warranty:
2 years
|
Weight:
24.4 kg
|
With stopcock:
Yes
Heavy duty ultrasonic baths for cleaning or sample treatment in aqueous liquids. Suitable for laboratory and respiratory protection area, industry, workshop and service area.Stainless steel tank and housingDrip water protectedRadio shieldedTimer from 1 to 15 min or continuousWith integral tank drain tap (G 1/2) for easy emptyingWith handles on both sidesFor 5 test sieves with 200 mm diameterPlease order sieve holder SH 28 C separately.
Dimensions external (Ø x H):
540 x 500 mm
|
Dimensions internal (Ø x H):
500 x 195 mm
|
Display:
Analogue
|
Ext. height:
500 mm
|
Ext. Ø:
540 mm
|
Height int.:
195 mm
|
IP code:
IP 32
|
Int. Ø:
500 mm
|
Manufacturer Article Number:
319
|
Max. voltage:
230 V
|
Nominal capacity:
39.5 l
|
Operation:
Rotary knob
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
RK 1040
|
Type of auxiliary energy:
Mains connection
|
Type of display:
Without display
|
Ultrasonic frequency:
35 kHz
|
Ultrasonic power:
380 W
|
Warranty:
2 years
|
Weight:
19.7 kg
|
With stopcock:
Yes
Heavy duty ultrasonic baths for cleaning or sample treatment in aqueous liquids. Suitable for laboratory and respiratory protection area, industry, workshop and service area.Stainless steel tank and housingDrip water protectedRadio shieldedTimer from 1 to 15 min or continuousWith integral tank drain tap (G 1/2) for easy emptyingUltrasonic bath for cleaning of 1 test sieve with 500 mm diameterPlease order sieve holder GH 28 separately.
Dimensions external (Ø x H):
265 x 270 mm
|
Dimensions internal (Ø x H):
240 x 130 mm
|
Display:
Analogue
|
Ext. height:
270 mm
|
Ext. Ø:
265 mm
|
Height int.:
130 mm
|
IP code:
IP 32
|
Int. Ø:
240 mm
|
Manufacturer Article Number:
306-GB
|
Max. voltage:
230 V
|
Nominal capacity:
5.6 l
|
Operation:
Rotary knob
|
Plug type:
UK
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
RK 106
|
Type of auxiliary energy:
Mains connection
|
Type of display:
Without display
|
Ultrasonic frequency:
35 kHz
|
Ultrasonic power:
120 W
|
Warranty:
2 years
|
Weight:
5 kg
|
With stopcock:
Yes
Heavy duty ultrasonic baths for cleaning or sample treatment in aqueous liquids. Suitable for laboratory and respiratory protection area, industry, workshop and service area.Stainless steel tank and housingDrip water protectedRadio shieldedTimer from 1 to 15 min or continuousWith integral tank drain tap (G 1/4) for easy emptyingUltrasonic bath for cleaning of 1 test sieve with 200 mm diameterPlease order sieve holder SH 7 separately.
Division:
10 µl
|
Increments µl:
10
|
Manufacturer Article Number:
VF2107
|
Max. measured value:
100 µm
|
Measured range:
0 ... 100 µm
|
Measuring range µm:
0 ... 100
|
Min. measured value:
0 µm
|
Width mm:
1 groove: 1x 12 mm
Zur Korngrößenbestimmung. Nach ISO 1524. Weitere Messbereiche auf Anfrage erhältlich.
Division:
1.5 µl
|
Increments µl:
1,5
|
Manufacturer Article Number:
VF2110
|
Max. measured value:
15 µm
|
Measured range:
0 ... 15 µm
|
Measuring range µm:
0 ... 15
|
Min. measured value:
0 µm
|
UNSPSC:
41-10-17-01
|
Width mm:
2 groove: 2x 12 mm
For sieving. Acc. to ISO 1524. Further measuring ranges available on request.
Description:
30, 16, 8, 4 mesh, 3/8", 3/4", 1 1/4"
|
For:
AS 300
|
Height:
40 mm
|
Manufacturer Article Number:
60.159.000999
|
Ø:
305 mm
Each set with one collecting pan.Other accessories, such as sieve lids and intermediate receivers, are available on request.
Height:
50 mm
|
Manufacturer Article Number:
60.149.000020
|
Material:
Stainless steel
|
Mesh size:
20 µm
|
UNSPSC:
41105003
|
Ø:
203 mm
Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.
Variants from €117.00*
Height:
25 mm
|
Manufacturer Article Number:
60.122.000020
|
Material:
Stainless steel
|
Mesh size:
20 µm
|
UNSPSC:
41105003
|
Ø:
200 mm
Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.
Variants from €117.00*
Height:
50 mm
|
Manufacturer Article Number:
60.131.000020
|
Material:
Stainless steel
|
Mesh size:
20 µm
|
UNSPSC:
41105003
|
Ø:
200 mm
Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.
Variants from €117.00*
Height:
50 mm
|
Manufacturer Article Number:
60.131.001000
|
Material:
Stainless steel
|
Mesh size:
1.00 mm
|
UNSPSC:
41105003
|
Ø:
200 mm
Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.
Height:
25 mm
|
Manufacturer Article Number:
60.122.001000
|
Material:
Stainless steel
|
Mesh size:
1.00 mm
|
UNSPSC:
41105003
|
Ø:
200 mm
Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.
Height:
50 mm
|
Manufacturer Article Number:
60.149.001000
|
Material:
Stainless steel
|
Mesh size:
1.00 mm
|
UNSPSC:
41105003
|
Ø:
203 mm
Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.
Height:
50 mm
|
Manufacturer Article Number:
60.132.006300
|
Material:
Stainless steel
|
Mesh size:
6300 µm
|
UNSPSC:
41105003
|
Ø:
200 mm
Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sievePreviously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieve
Variants from €117.00*
Height:
25 mm
|
Manufacturer Article Number:
60.123.000180
|
Material:
Stainless steel
|
Mesh size:
180 µm
|
UNSPSC:
41105003
|
Ø:
200 mm
Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sievePreviously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieve
Description:
Collecting pan, Ø 200 mm, height 50 mm
|
Manufacturer Article Number:
69.720.0050
In accordance to ISO 3310-1:2016 and ASTM E11:2009.Further collecting pans available on request.
Description:
Adapter and lid for analysing sieves 200 x 50 mm and 200 x 25 mm
|
Manufacturer Article Number:
02.025.0070
Variants from €129.00*
Height:
50 mm
|
Manufacturer Article Number:
552.050.222-042
|
Material:
Stainless steel
|
Mesh size:
0.355 mm
|
UNSPSC:
41105003
|
Ø:
200 mm
With soft solder seam (temperature resistant to 170°C). 200mm diameter. Height 50mm.
Height:
25 mm
|
Manufacturer Article Number:
552.025.222-011
|
Material:
Stainless steel
|
Mesh size:
20 µm
|
UNSPSC:
41105003
|
Ø:
200 mm
With soft solder seam (temperature resistant up to 170 °C).Diameter: 200 mm.
Variants from €81.00*
Height:
25 mm
|
Manufacturer Article Number:
552.025.222-042
|
Material:
Stainless steel
|
Mesh size:
0.355 mm
|
UNSPSC:
41105003
|
Ø:
200 mm
With soft solder seam (temperature resistant to 170°C).200mm diameter.Height 25mm.
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*