Latex (NR)For rotary evaporatorsSuitable for mixture or collection and short-term storage of gasesFor control of air/gas entry or tread out of gas in instrumentsTubing length 140 mm, inside diameter 7 mm
Receiving flasks with spherical ground glass joint KS35 suitable for all Rotary evaporators.
Suitable to be used in distillation assemblies to prevent raw liquid step over from flask to condenser.
Pear shaped Evaporator flask with NS 29/32, suitable for all Rotary evaporators.
Especially for rotary evaporators, with spherical joint socket S 35, autoclavable, material: DURAN®.
Especially for rotary evaporators, with center neck and conical joint, pear-shaped, material: DURAN®
Especially for rotary evaporators, with center neck and conical joint, with highly transparent PUR coating, autoclavable, pear-shaped, material: DURAN®
Specially for rotary evaporators. For the drying of powder-like substances. With center neck and conical joint, with inscription label.
Especially for rotary evaporators, with spherical joint socket S 35, autoclavable, material: DURAN®.
The rotary evaporator RE-100D is suitable for all distillation tasks. The motorized lift is equipped with a safety function that automatically lifts the flask out of the heating bath in case of power failure. LCD display shows temperature, speed and time.Final position recognitionPush-off mechanismTimer functionInterval operation left/rightUSB interfaceVertical condenser. Coated condenser as optionScope of supply: Rotary evaporator, vertical condenser
Protective cover for the heating bath of the rotary evaporator RE 212 FW-G.
This devices are central control units for regulation of all process parameter: vacuum, cooling temperature, rotation and heating bath temperature.Available as hand or motor lift7'' touch display for controlling the entire system including the vacuum and the cooling temperatureFor precise monitoring, the pictogram on the-display also symbolizes active functionsSeparate knobs for quick access: the right one for direct vacuum control, the left one for the rotationSetting of values either via the touch display or the separate quick access knobsDirect access to two favorites on the start screenExpandable solvent library: user defined favorites can be transfered to other devices using a USB stickUser defined evaporation processes (ramps) can be defined and savedAutomatic evaporation with the Dynamic AUTOaccurate Program (DAA)USB, Micro SD and LAN-/RS 232 interfaces (Lab 4.0-ready)Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask, Control-Box. Supplied condensor as indicated.This devices are central control units for regulation of all process parameter: vacuum, cooling temperature, rotation and heating bath temperature.Available as hand or motor lift7'' touch display for controlling the entire system including the vacuum and the cooling temperatureFor precise monitoring, the pictogram on the-display also symbolizes active functionsSeparate knobs for quick access: the right one for direct vacuum control, the left one for the rotationSetting of values either via the touch display or the separate quick access knobsDirect access to two favorites on the start screenExpandable solvent library: user defined favorites can be transfered to other devices using a USB stickUser defined evaporation processes (ramps) can be defined and savedAutomatic evaporation with the Dynamic AUTOaccurate Program (DAA)USB, Micro SD and LAN-/RS 232 interfaces (Lab 4.0-ready)Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask, Control-Box. Supplied condensor as indicated.
For distilling low-boiling solvents. The solvent to be distilled can be continuously fed in through the PTFE inlet tube.Cooling by dry ice, no cooling water requiredMax. condensation thanks to low temperatures
The rotary evaporator has a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller and a cooling water monitoring. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The USB port or the RS-232 interface enable remote control with the IKA "labworldsoft" software package and an update option with the firmware update tool. The rotary evaporator is fitted with the full-automatic vacuum pump VACSTAR digital. This enables better automatic detection of the solvent boiling point. The Vacstar digital is controlled directly from the drive unit of the RV 10 auto via the data cable provided.Integrated solvent library with 40 preset solvents and expansion optionOptimized heating bath volume for rapid achievement of working temperatureProgramming option for up to ten individual proceduresSmooth startRight or left rotationTimer functionAutomatic vacuum managementMotorised lift with "safety-stop" functionScope of supply: Rotary evaporator RV 10 auto pro FLEX, heating bath HB 10, vacuum pump VACSTAR digital, vertical glassware, vapor tube, hoses, USB cable
The four-chamber membrane vacuum pump convinces with its high suction capacity, low space requirement and high serviceability. The setting of the parameters is carried out through a rotary-push button over a digital display showing current rpm. It is used for dry and oil-free applications in the laboratory. The membranes of the pump are particularly chemical resistant.Scope of supply: Vacuum hose (1 m), silencer, USB A-B cable, connecting cable
The RV 10 digital is a robust and reliable lab companion. Its optimized bath volume allows for fast heat-up times. The vertical condenser unit has special designed glass tubes that utilize the surface extremely efficient. That's why the RV 10 digital delivers reliable and reproducible process results that are usually reserved for more costly systems. Additional features such as smooth start, left-right interval or timer function capability support the user in their daily lab work. Another important aspect of the RV 10 digital are the sophisticated safety features. The motorised lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. Safety temperature circuits can be set individually. Dry-run protection, adjustable lower end stop and lock function of bath setting, complete the line of safety features. Furthermore, IKA offers a choice of coated glassware for increased safety needs. The RS 232 interface allows for remote control via IKAs "labworldsoft". The heating bath is controlled via the IR interface from the main unit.Universal water/oil heating bathErgonomically placed handles on heating bathPush-off mechanism to loosen tight fitted glasswareEasy and safe operation due to ergonomical design of the user interfaceScope of supply: Rotary evaporator RV 10 digital, heating bath HB digital, Woulf bottle, spherical joint clip RV 05.10, clamp, NS 29 RV 10.88, vapor tube RV 10.70, support pole
The RV 3 is the ideal entry-level model of the IKA rotary evaporator portfolio. 4 l water heating bath with digital temperature display and carrying handlesMechanical lift end-point safety stopLocking mechanism: red indicator shows unlocked position of the vapor tubeManual lift for precise positioning of the glassware, single-handed, suitable for left and right-handed operatorsAdjustable immersion angleStepless speed setting with dial control and speed displayFlask clamping mechanism with integrated push-off function for easy exchange of evaporation flasksScope of supply: Rotary evaporator RV 3 V, heating bath HB eco, vertical glassware RV 10.1
The RV 10 digital is a robust and reliable lab companion. Its optimized bath volume allows for fast heat-up times. The vertical condenser unit has special designed glass tubes that utilize the surface extremely efficient. That's why the RV 10 digital delivers reliable and reproducible process results that are usually reserved for more costly systems. Additional features such as smooth start, left-right interval or timer function capability support the user in their daily lab work. Another important aspect of the RV 10 digital are the sophisticated safety features. The motorised lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. Safety temperature circuits can be set individually. Dry-run protection, adjustable lower end stop and lock function of bath setting, complete the line of safety features. Furthermore, IKA offers a choice of coated glassware for increased safety needs. The RS 232 interface allows for remote control via IKAs "labworldsoft". The heating bath is controlled via the IR interface from the main unit.Universal water/oil heating bathErgonomically placed handles on heating bathPush-off mechanism to loosen tight fitted glasswareEasy and safe operation due to ergonomical design of the user interfaceScope of supply: Rotary evaporator RV 10 digital, heating bath HB digital, vertical glassware RV 10.1, vapor tube RV 10.70, Woulff bottle, support pole
Digital displays for speed and heating bath temperature allow for optimal control of all distilling processes. Clearly visible glass display Locking mechanism: red display for unlocked state of vapor tubeManual lift for precise positioning of glasswareWater/oil heating bath with integrated ergonomic carrying handlesLock function for the heating bath temperatureAdjustable immersion angleSingle-hand operation; ambidextrous designEasy exchange of evaporation flasks by clamp mechanism with push-out functionScope of supply: Rotary evaporator RV 8, heating bath HB digital, vertical coated glassware RV 10.10, clamp, vapor tube, woulff bottle
Vacuum pump for dry, oil-free applications. Slimline, compact design and long service lifeResistant to chemicals as all parts that come into contact with gas are made of PTFE or PTFE compoundsScope of supply: Vacuum pump, vacuum hose, silencer, Y hose connector 8 mm
The rotary evaporator has a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller and a cooling water monitoring. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The USB port or the RS-232 interface enable remote control with the IKA "labworldsoft" software package and an update option with the firmware update tool. The rotary evaporator is fitted with the full-automatic vacuum pump VACSTAR digital. This enables better automatic detection of the solvent boiling point. The Vacstar digital is controlled directly from the drive unit of the RV 10 auto via the data cable provided.Integrated solvent library with 40 preset solvents and expansion optionOptimized heating bath volume for rapid achievement of working temperatureProgramming option for up to ten individual proceduresSmooth startRight or left rotationTimer functionAutomatic vacuum managementMotorised lift with "safety-stop" functionScope of supply: Rotary evaporator RV 10 auto, heating bath HB 10, vacuum pump VACSTAR digital, balljoint clamp, clamp NS29, vapor tube, hoses, USB cable
Digital displays for speed and heating bath temperature allow for optimal control of all distilling processes. Clearly visible glass display Locking mechanism: red display for unlocked state of vapor tubeManual lift for precise positioning of glasswareWater/oil heating bath with integrated ergonomic carrying handlesLock function for the heating bath temperatureAdjustable immersion angleSingle-hand operation; ambidextrous designEasy exchange of evaporation flasks by clamp mechanism with push-out functionScope of supply: Rotary evaporator RV 8, heating bath HB digital, vertical glassware RV 10.1, vapor tube, woulff bottle
The rotary evaporator has a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller and a cooling water monitoring. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The USB port or the RS-232 interface enable remote control with the IKA "labworldsoft" software package and an update option with the firmware update tool. The rotary evaporator is fitted with the full-automatic vacuum pump VACSTAR digital. This enables better automatic detection of the solvent boiling point. The Vacstar digital is controlled directly from the drive unit of the RV 10 auto via the data cable provided.Integrated solvent library with 40 preset solvents and expansion optionOptimized heating bath volume for rapid achievement of working temperatureProgramming option for up to ten individual proceduresSmooth startRight or left rotationTimer functionAutomatic vacuum managementMotorised lift with "safety-stop" functionScope of supply: Rotary evaporator RV 10 auto pro FLEX, heating bath HB 10, vacuum pump VACSTAR digital, vertical coated glassware, clamp NS29, vapor tube, hoses, USB cable
For reflux distillation. The solvent to be distilled can be continuously fed in through the PTFE inlet tube.
Promotion
Glazed inside and outside except for rim.
Promotion
Glazed inside and outside except for rim.