Quick delivery
Personal contact
+49 (0)7336 9603 0
info@haeberle-lab.de
Go to homepage
Help
Watch lists
Shopping cart
Filter
Filter
Thermo Elect.LED GmbH (Kendro)
Accessories for Cimarec+™ Hotplates, Stirrers and Hotplate Stirrers
From €19.15*
Variations
Accessories for Dry Baths, AccuBlock™
Corning BV
Accessories for Dry Baths, AccuBlock™
From €103.10*
Variations
Accessories for Dry Block Heaters
Ohaus GmbH
Accessories for Dry Block Heaters
From €78.00*
Variations
Cole-Parmer Ltd. (Stuart)
Accessories for hotplate CC 162 and SC 162

€155.10*

Variations
Accessories for LLG-uniBLOCKTHERM
LLG Labware
Accessories for LLG-uniBLOCKTHERM
Dimensions Heating blocks (W x D x H): 95 x 150 x 50 mm

€0.00*

Accessories for Standard heating mantles
ISOHEAT GmbH
Accessories for Standard heating mantles
LabHEAT® - Accessories made of stainless steel (1.4301) for higher stability or to integrate within support wall. The heating mantles are able to be suspended on its four clips.

€37.00*

Variations
Accessories for Thermo shaker Matrix Orbital Δ+ / Heating block Matrix Δ+
IKA-Werke GmbH & Co.KG
Accessories for Thermo shaker Matrix Orbital Δ+ / Heating block Matrix Δ+

€106.00*

Variations
Hettich Benelux B.V.
Accessories for ThermoMixers and BlockThermostats
*for Cat. No. 9.777 120, 9.777 121, 9.777 122, 9.777 123**for Cat. No. 9.777 130, 9.777 131, 9.777 133, 9.777 132
From €72.50*
Variations
16%
Accessories for ThermoStat plus / ThermoMixer plus
Eppendorf SE
Accessories for ThermoStat plus / ThermoMixer plus
Accessory features: Interchangeable blocksExcellent heat insulation, safe to touch (no direct contact with hot surfaces)Interchangeable thermoblocks for 24 x 0.5ml, 1.5ml or 2.0ml microtubes: Each supplied with a work rack and cooling pack for rapid cooling to 0°C (instead of an ice bath)Interchangeable thermoblock for microtitration plates of all well forms incl. deep well microplates; Adapter plate for 96 x 0.2ml PCR tubes for use with the microtitration plate blockBlock with lid for headspace and other laboratory tubes with diameter 11mm to 12mm, height 30mm to 76mmCombiBox, interchangeable thermoblock for universal temperature control of various sizes of tubes; can be attached easily, without locking

€172.41* €204.00*

Variations
Aluminium blocks for block heaters BH-200 series
Cole-Parmer Ltd. (Stuart)
Aluminium blocks for block heaters BH-200 series
From €193.50*
Variations
Aluminium blocks for Dry Block Heater
IKA-Werke GmbH & Co.KG
Aluminium blocks for Dry Block Heater
Further blocks available on request.

€123.00*

Variations
Block Heaters, analogue and digital, BH-200 series
Cole-Parmer Ltd. (Stuart)
Block Heaters, analogue and digital, BH-200 series
choice of either analogue or digital modelsdigital models available with either 130 or 200 °C maximum temperaturethree block model for extra capacitydual control models have two blocks with independent temperature controluniform and stable block temperaturesDesigned for the precise heating of test-tubes, microcentrifuge tubes, cuvettes and microplates.Range compromises an economical analogue model with easy to use, dial setting and advanced digital models with bright, easy to read, LED display which facilitates setting of the required temperature and also accurate monitoring of the actual temperature.Excellent temperature stability and uniformity is maintained via sensitive, microprocessor control.Heats to 100°C in
From €1,028.10*
Variations
Block thermostat CH3-150 Combitherm-2
Grant Instruments Ltd.
Block thermostat CH3-150 Combitherm-2
Block thermostat with cooling and heating function and with 2 independent modules for interchangeable blocks, combined in a single unit. Control panel is divided in two parts for separate control of cooling and heating blocks.Digital temperature control for optimum precisionDigital timer with sound alarmUser adjustable programs for temperature and time: 16 heating programs and 16 cooling programsTemperature Calibration FunctionWith protective lidSpecificationsTemperature range heating / cooling:25 ... 150 °C / -3 ... 20 °CTemperature control range heating / cooling:ambient +5 ... 150 °C / ambient -23 ... ambient +5 °CTemperature uniformity: Temperature accuracy:±0.1 °C 0.1 °CTimer:1 min ... 99 h 59 minDimensions (W x D x H):295 x 285 x 220 mmWeight:5.6 kgPower supply:230 V, 50/60 Hz

€1,649.00*

Variations
Block thermostats PCH-1 / PCH-2 / PCH-3
Grant Instruments Ltd.
Block thermostats PCH-1 / PCH-2 / PCH-3
Personal benchtop cooling/heating dry block for microcentrifuge tubes. The ingenious block construction, combined with the powerful Peltier module, produces very rapid cooling and heating.Temperature range:-10 to +100°CHeat up, amb. to 100°C:15 minCool down, 100°C to amb.:15 minCool down, amb. to -10°C:21 min

€1,133.00*

Variations
Block thermostats, QBD, QBH series, accessory covers
Grant Instruments Ltd.
Block thermostats, QBD, QBH series, accessory covers
Not required with QDP-FL mictrotiter blocks
From €139.00*
Variations
Block thermostats,QBD and QBH series
Grant Instruments Ltd.
Block thermostats,QBD and QBH series
For controlled dry heating of test tubes, microplates and Eppendorf tubes in interchangeable aluminium blocks. The following models are available:Choose from 3 digital systems with 1, 2 or 4 interchangeable blocks (QBD models) and 1 digital high-temperature system (QBH2) with 2 blocksFast heat-up time and in-block temperature sensing capability using external sensor probe. Please order Cat. No. 6.228 714 separately.Built-in timer, programmable delayed start and RS232 output for data monitoringIncludes block removal toolRequires but does not include interchangeable QB-series blocksSpecificationsTemperature range:ambient 5 to 130 °C, QBH2: ambient 5 to 200 °CStability at 37 °C: Uniformity±0.1 °Cwithin the block at 37 °C: across similar blocks at 37 °C:±0.1 °C ±0.2 °CSupply requirements:230 V, 50/60 Hz, single phase
From €843.00*
Variations
Blocks and Combination Blocks for Standard Test Tubes for Dry Block Heaters
Ohaus GmbH
Blocks and Combination Blocks for Standard Test Tubes for Dry Block Heaters

€129.50*

Variations
Blocks for Microcentrifuge and Centrifuge tubes for Dry Block Heaters
Ohaus GmbH
Blocks for Microcentrifuge and Centrifuge tubes for Dry Block Heaters

€129.50*

Variations
Blocks for PCR vessels and 96/384 well plates for Dry Block Heaters
Ohaus GmbH
Blocks for PCR vessels and 96/384 well plates for Dry Block Heaters
From €140.50*
Variations
Thermo Elect.LED GmbH (Kendro)
Blocks for Thermo Scientific™ Compact Digital Dry Bath/Block Heater S and D
From €22.36*
Variations
Blocks for Vials for Dry Block Heaters
Ohaus GmbH
Blocks for Vials for Dry Block Heaters

€129.50*

Variations
Hettich Benelux B.V.
BlockThermostats TH 21 / TK 23
The Block Thermostats are used for tempering of solutions in closed reaction tubes and plates. They stand out due to their high temperature accuracy as well as their various fields of application thanks to over 30 different exchangeable blocks.Specifications Thermostats:HeatingBlock TH 21 // Heating/CoolingBlock TK 23Temperature operation range:Amb. +3°C to +130°C // Amb. -16°C to +90°CTemperature adjustable range:0°C to +137°C // -10°C to +105°CAccuracy/ resolution:±0.1°C / 0.1°C // ±0.3°C / 0.1°CMax. heating time:9.5°C / min // 4°C / minMax. cooling time:-- // 7°C / minDimensions (W x D x H):220 x 330 x 109mm // 220 x 330 x 144mmCapacity:2 exchangeable blocks (not included)Weight (with block / blocks):approx. 3.5kg // approx. 7.5kgElectrical heating/ cooling power:350W // 130WSupply requirements:230V, 50HzEasy Control // Smart Control:Timer 19h 59min // 30 program stepsFurther power connectors on request.
From €1,359.00*
Variations
Built-in hotplates series EB-C, CERAN®
Harry Gestigkeit GmbH
Built-in hotplates series EB-C, CERAN®
The EB-C series is designed for table installation, and is supplied with installation suspension. The separate controller housing can be installed directly into the table frame. Electrical connections between controller housing and hotplate are protected by a flexible metal hose. Conductor length between controller housing and hotplate 0.65 m.Heated area marked on CERAN® heating surfaceNo heat loss to table top and heating surface edges

€1,247.00*

Variations
Changeable blocks for CH3-150 Combitherm-2
Grant Instruments Ltd.
Changeable blocks for CH3-150 Combitherm-2

€160.00*

Variations

Promotion

Evaporating dishes, DURAN®
Evaporating dishes, DURAN®
DIN 12336Flat-bottom with spoutAutoclavable
From €10.18*
Variations
Evaporating basins, quartz glass
Evaporating basins, quartz glass
DIN 12336Flat-bottom with spout
From €25.50*
Variations
Evaporating basins, porcelain, shallow form
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard

€11.11*

Variations

Promotion

Evaporating dishes, DURAN®
Evaporating dishes, DURAN®
DIN 12336Flat-bottom with spoutAutoclavable
From €10.18*
Variations
Evaporating basins, quartz glass
Evaporating basins, quartz glass
DIN 12336Flat-bottom with spout
From €25.50*
Variations
Evaporating basins, porcelain, shallow form
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard

€11.11*

Variations

Hot Plates & Hoods

Heating plates are used in many ways in the laboratory for uniform heating of glass vessels (beakers, flasks) and pots as well as for drying substances. Heating plates made of glass ceramic are characterized by high chemical resistance. Universally applicable laboratory hotplates offer a high degree of safety. Analog and digital controllers guarantee reliable temperature settings.
Heating mantles (heating mushrooms) with glass silk insulated heating zones are used for heating glass vessels (flasks). The outer jacket is made in a crocheted form and the flexible heating element ensures uniform heat distribution and gentle treatment of the laboratory glassware. Typical use is in distillation processes. Due to safety requirements, the temperature is controlled by a personal protection switch. The design of heating mantles with corrosion-resistant stainless steel heating pan serves as protection against leaking liquids as a result of vessel book. Various performances such as series heaters also possible practical use in the fume hood.

We use cookies, which are necessary for the efficient operation of the website, in order to analyze visits to our website and to display relevant advertising for you on partner websites. For services provided by Google, data may be transferred to the USA. The USA does not have an adequate level of data protection according to EU standards. It is particularly important to note that US authorities may process your data for monitoring purposes and that there may be no legal remedy against this. If you click on “Accept all Cookies,” you agree to the use of cookies for analyses and advertising, as well as to the transfer of data to the USA. You can change your cookie preferences at any time. If you do not agree, cookies will be limited to technically essential cookies only. More information can be found in our Data Privacy Policy....