Article 1 - 24 from 492

Pasteur pipettes, soda glass

Length: 300 mm Manufacturer Article Number: 3150162 Material: Soda-lime glass UNSPSC: 41121509 With cotton stopper: No

Extra long tip, optimal for NMR applications. With constriction, without cotton wool.

€1,269.87*

Pipettes, Pasteur, PE

Manufacturer Article Number: 1131305 Material: PE Nominal capacity: 1 ml Package: Single packed Sterile: Yes UNSPSC: 15-12-19-00 UNSPSC: 41121509

Variants from €75.98*

From €267.96*

Variations

Pipette stand, horizontal, PP

Depth: 155 mm Height: 230 mm Manufacturer Article Number: 022.02.001 Material: PP No. of pipettes: 12 UNSPSC: 41122801 Width: 210 mm

Pipette stand for 12 pipettes, horizontal is made from moulded polypropylene which is autoclavable. On each side, 6 pipettes (longer than 22 cm) can be stored horizontally. Easy to clean.

€57.02*

New

Pasteur pipettes, PE, Macro

Bulb draw: 8.3 ml Length: 148 mm Manufacturer Article Number: 26 55 206 Nominal capacity: 6.0 ml Package: Single packed Sterile: Yes With graduation: No

For transfer of liquids. Resitant against almost all acids. Soft and elastic bulb.

Variants from €46.46*

€68.20*

65%

Pipette rinser system

Height: 495 mm Height Insert mm: 280 Height mm: 495* Manufacturer Article Number: 0022200 Material: PP/PE Type: Pipette baskets Ø: 145 mm Ø mm: 145

Zur problemlosen und schonenden Reinigung von Pipetten nach dem Saugheberprinzip. Ein komplettes Spülsystem besteht aus Pipettenwascher, Reinigungsbehälter und Pipettenkorb, bitte jeweils separat bestellen. Hitzebeständig bis 105 °C, gute chemische Beständigkeit.Zur Aufnahme von Pipetten oder Büretten nach Mohr. Der Korb ist mit einem Griff und einem höhenverstellbaren Ring versehen. Der Boden aus elastischem PE verringert die Gefahr der Beschädigung der Pipetten. Höhe des Einsatzes 280 mm.

€26.00* €73.48* (64.62% saved)

61%

Pipette rinser system

Height: 734 mm Height Insert mm: - Height mm: 734 Manufacturer Article Number: 0021700 Material: PP/PE Type: Pipette rinser Ø: 170 mm Ø mm: 170

For easy and gentle cleaning of pipettes according to the suction lifter principle. A complete rinsing system consists of pipette washer, pipette soaking jar and pipette basket, please order separately. Heat resistant up to 105 °C, good chemical resistance.Pipette basket: For holding pipettes up to 600 mm or burettes acc. to Mohr. The basket is equipped with a handle and a height-adjustable ring. The bottom of elastic PE reduces the risk of damage to the pipettes.Pipette soaking jar: For pre-cleaning of the pipettesPipette rinser: For rinsing the pre-cleaned pipettes. The emptying siphon permits constant water exchange. The water inlet should be approx. 2 l/min.*with handle

€138.00* €345.70* (60.08% saved)

Pipette stand, vertical, PP

Manufacturer Article Number: 022.01.001 Material: PP No. of pipettes: 94 UNSPSC: 41122801

The pipette carousel can be rotated 360° and can hold up to 94 pipettes. The pipettes are placed vertically in the stand. The base plate has a raised edge which catches dripping liquids.

€66.64*

61%

Pipette rinser system

Height: 503 mm Height Insert mm: - Height mm: 503 Manufacturer Article Number: 0022100 Material: PP/PE Type: Pipette soaking jar Ø: 165 mm Ø mm: 165

Zur problemlosen und schonenden Reinigung von Pipetten nach dem Saugheberprinzip. Ein komplettes Spülsystem besteht aus Pipettenwascher, Reinigungsbehälter und Pipettenkorb, bitte jeweils separat bestellen. Hitzebeständig bis 105 °C, gute chemische Beständigkeit.Zur Vorreinigung der Pipetten.

€64.00* €160.60* (60.15% saved)

Graduated pipettes, Soda-lime glass, class B, amber stain graduation, type 3

Accuracy class: B Colour graduation: Brown Division: 0.01 ml Length: 360 mm Manufacturer Article Number: 1000129 Material: Soda-lime glass Nominal capacity: 0.5 ml Standard: DIN EN ISO 835 Tolerance: 0,0075 ±·ml Tolerance: 0,0075 ± ml Type of measuring pipettes: Type 3 UNSPSC: 41121510 With cotton plug end: No

EX (TD) calibrated. Tolerances better than class B requirements. With durable amber stain graduation, short line, graduated to tip, zero on top, type 3, acc. to DIN EN ISO 835. From 5ml with cotton plug end as standard.* Supplementary to DIN.

Variants from €5.98*

From €8.91*

Variations

Graduated pipettes, soda glass, class AS, type 3

Accuracy class: AS Colour graduation: Blue Division: 0.01 ml Length: 360 mm Manufacturer Article Number: 021.01.001 VE=10 Material: Glass Nominal capacity: 1 ml Standard: DIN EN ISO 835, DIN 12699 Tolerance: 0,007 ±·ml Tolerance: 0,007 ± ml Type of measuring pipettes: Type 3 UNSPSC: 41121510

Soda glass. Conformity-certified. With batch date identification. DIN EN ISO 835, DIN 12699. Calibrated to deliver (EX). Ring marks and graduations in permanent blue enamel.

Variants from €8.39*

€78.84*

Pasteur pipettes, PE

Length: 140 mm Manufacturer Article Number: 26 00 220 Nominal capacity: 1.3 ml Package: Bulk pack Sterile: No With graduation: No

For transfer of liquids. Resitant against almost all acids. Soft and elastic bulb.For transfer of liquids. Resistant against almost all acids. Soft and elastic bulb.

Variants from €26.34*

€50.60*

Pasteur pipettes, PE, Micro

Bulb draw: 3.7 ml Length: 152 mm Manufacturer Article Number: 26 55 151 Material: PE Nominal capacity: 3.0 ml Package: Single packed Sterile: Yes UNSPSC: 41121509

For transfer of liquids. Resitant against almost all acids. Soft and elastic bulb.

Variants from €53.50*

€63.80*

Reagent reservoirs

Autoclavable: Yes Colour: White Depth: 50 mm Height: 37 mm Manufacturer Article Number: HS20821A Material: PP No. of chambers: 13 Type: Dual Solution UNSPSC: 41121522 Width: 125 mm With lid: Yes

Polypropylene solution basin/reagent reservoir has a standard 50mL basin on one side and 12 individual 5mL basins on the other side. Wells are angled both downward and outward, guiding multichannel pipettor tips toward a centered position, which helps to avoid contamination and waste. Imprinted indices identify samples; loose-fitting lids prevent evaporation and contamination. Non-sterile.

€238.56*

Rubber blowballs

Capacity ml: 5 Colour: Red Manufacturer Article Number: 4012520 Material: PVC Max. capacity: 5 ml Type: B Type: B oval Ø bores: 6 mm Ø mm: 30

Non-rigid PVC. Red-brown, smooth. With 6mm i.d. outlet hole.

€12.60*

41%

Graduated pipettes, Soda-lime glass, class AS, blue graduation, type 3

Accuracy class: AS Colour graduation: Blue Division: 0.01 ml Length: 360 mm Manufacturer Article Number: 1101140 Material: Soda-lime glass Nominal capacity: 2 ml Tolerance: 0,01 ± ml Tolerance: 0,01 ±·ml Type of measuring pipettes: Type 3 UNSPSC: 41121510 With cotton plug end: No

EX (TD) calibrated. Main point ring graduation. With dated batch identification. Declaration of conformity acc. to DIN 12600. Main point ring graduation. High-contrast blue graduation. Graduated to the tip, zero on top. Type 3, acc. to DIN EN ISO 835. From 5ml with cotton plug end as standard.For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available.

Variants from €4.79*

From €8.21*

Variations

Pipette Tips, PP

Capacity: 50 ... 1,000 µl Colour: Blue For type: Kartell®, Gilson®, Eppendorf® , Biohit®, Socorex® , HTL®, Nichiryo®, Finnpipette®, Thermo Manufacturer Article Number: 0094100 Material: PP Max. capacity: 1000 µl Min. capacity: 50 µl Package: Bag UNSPSC: 41121600 With graduation: No

From €46.92*

Variations

Pipette teats, latex

Height mm: 45 ± 5 Manufacturer Article Number: 0391400 Material: Latex Max. capacity: 2 ml UNSPSC: 41-12-15-10 Volume ml: 2

Suitable for ranvier dropping tubes and pasteur pipettes. With rim.

From €2.47*

Variations

Tip

Pasteur pipettes, PE

Body Ø: 5 mm Bulb draw: 3.5 ml Length: 150 mm Manufacturer Article Number: 88336/1 Material: PE Nominal capacity: 1.0 ml Package: Bulk pack Sterile: No UNSPSC: 41-12-15-09 UNSPSC: 41121509 With graduation: Yes

Disposable pipettes with fine tip for precise dispensing.With suction ballGraduatedNon-sterile in multi packs or sterile, individually wrapped

From €46.23*

Variations

Measuring pipette, Soda-lime glass, class AS, brown graduation, type 1

Accuracy class: AS Colour graduation: Brown Division: 0.05 ml Length: 360 mm Manufacturer Article Number: 1100253 Material: Soda-lime glass Nominal capacity: 5.0 ml Standard: DIN EN ISO 835 Tolerance: 0,03 ±·ml Tolerance: 0,03 ± ml Type of measuring pipettes: Type 1 UNSPSC: 41121510 With cotton plug end: Yes

Calibrated for EX. Durable gradution with silver diffusion ink, certified conformity, with dated batch identification. Main point ring graduation, not graduated to tip (partial delivery). With standard cotton plug from 5 ml, zero point at top, type 3, DIN EN ISO 835. Additional batch certificates can be generated and printed at any time free of charge at the manufacturer's website.

Variants from €7.99*

From €11.15*

Variations

Filter tips, PP

Capacity: 1.0 ... 20 µl Manufacturer Article Number: 4330-7139 Max. capacity: 20 µl Min. capacity: 1.0 µl Package: 10 x Rack of 96 Package capacity: 96 Tip form: Standard

The pipette tips are produced in clean room and are compatible with most popular brands of pipettors.SterileDNase-, RNase- and pyrogen freeGraduated

From €112.29*

Variations

Pipette tray, PVC

Depth: 283 mm Height: 40 mm Manufacturer Article Number: 0099600 Material: PVC UNSPSC: 41122800 Width: 216 mm

PVC. For pipettes of all sizes. Can accommodate 7 pipettes with overall stem diameter not exceeding 20mm longitudinally or 16 pipettes with stem diameter not exceeding 10mm laterally.

From €40.83*

Variations

Pasteur pipettes, PE

Length: 195 mm Manufacturer Article Number: 0031600 Material: PE Nominal capacity: 5.0 ml UNSPSC: 41121509 With graduation: Yes

With integrated bellow and graduation.

Variants from €30.48*

From €40.94*

Variations

New

Reagent Reservoirs

Colour: White Manufacturer Article Number: HS120637 Material: PS No. of chambers: 1 No. of packages: 50 Nominal capacity: 5 ml Package: 50 x Bag of 1 Package capacity: 1 Pyrogen free: Yes RNase/DNase-free: Yes Sterile: Yes

Disposable Reagent Reservoirs with a V-shaped bottom to ensure that all the reagent is accessible and can be easily aspirated. Thick wall construction and wide base adds stability and durability making the reservoir easy to handle without product deformation.Graduation markings allow for measurement of the liquidWith pour-off spouts on all cornersStackable, with nesting system for easy separationSterile versions are sealed in bags, electron beam sterilised and Dnase, Rnase and pyrogen-freeQuality certificate available on request

From €63.57*

Variations

Safety pipette bulb Howorka-Ball®

Manufacturer Article Number: 1020 Max. capacity: 20 ml Volume ml: 20

no rigid connection with tubeno valves or side vent on tubessuitable for all standard tube diameters, including pipettes, burettes, filter tubes etc.no unstable air pocketslong operational life due to durable componentsEasily cleaned and steam sterilized if contaminated with liquids

From €50.15*

Variations

Article 1 - 24 from 492

Promotion

Evaporating basins, porcelain, shallow form

Glazed inside and outside except for rim.

Variants from €13.80*

Variations

Promotion

Evaporating basins, porcelain, shallow form

Glazed inside and outside except for rim.

Variants from €13.80*

Variations

Pipette accessories

Microliter pipettes are highly accurate and dispense small volumes from 0.1 µl to 10,000 µl. Piston pipettes operate on the displacement principle: a piston displaces air and thereby the liquid when pressed down.

We offer the following manufacturers:

BRAND, Eppendorf, Gilson, LLG, Sartorius, Socorex, Vitlab, Thermo

Brand

Pipettes are crucial in the laboratory. Choosing the right pipette ensures tasks are performed effectively and effortlessly. What should you consider? Pipetting button: Choose between a side pipetting button and a central pipetting knob. The Transferpette® electronic piston pipette requires a brief touch of the pipetting button to initiate the piston movement.

Tip ejection: All Transferpette® models feature a separate tip ejector to prevent accidental tip ejection! The piston pipettes are calibrated in accordance with EN ISO 8655 within the scope of gauge monitoring. All models of Transferpette® pipettes feature the unique Easy Calibration technique allowing adjustment without tools.

The pipettes can be autoclaved. Depending on the model, either the pipette shaft or even the entire pipette can be autoclaved at 121 °C (2 bar), according to DIN EN 285. Shaft tip: Pipette and pipette tips are developed and matched by BRAND. Transferpette® pipettes and tips from BRAND fit perfectly together. Universal shaft tips can also be used with tips from other manufacturers.

The Transferpette® S is an innovative solution with a central pipetting knob for demanding applications. The Transferpette® S piston pipette from BRAND sets a new standard! The Transferpette® S piston pipettes were developed by BRAND, focusing on ergonomics and operation, using new materials. The Transferpette® S models are perfect manual pipettes for demanding laboratory applications. The Transferpette® S piston pipette is light, robust, and energy-efficient. It offers maximum versatility and optimal quality. There are 10 Variable models and 8 Fix models ranging from 0.1 µl to 10 ml. Features include: centrally located large pipetting button and ejection button, one-handed operation, complete autoclavability at 121 °C (2 bar) according to DIN EN 285, easy calibration technique, visible external factory setting adjustment, short stroke length to reduce the risk of RSI, corrosion-resistant piston and ejector, color-coded volume range. Transferpette® S 0.1-1 µl – highest precision in molecular biology, especially for enzyme pipetting. UV-resistant.

Eppendorf

The Eppendorf Research plus pipette is easy to use. It is one of the most widely used pipettes worldwide. The Research plus is highly ergonomic and protects your health in the laboratory. It is lightweight, easy to operate, and highly reliable. We offer many different variants, such as single-channel pipettes with fixed or variable volume, multi-channel pipettes with 8, 12, 16, or 24 channels, and micropipettes with adjustable tip spacing. We are confident that we have the right option for your application.

It feels good to know that you are working with one of the most well-known and advanced pipettes in the world. The pipette features a spring-loaded tip cone, adjustment possibility, and improved volume display. Additionally, it is lightweight and can be fully autoclaved. This is the manual Eppendorf Research plus pipette. In 2021, the non-profit organization My Green Lab® certified the Research plus single-channel pipettes with variable volume with the ACT® Environmental Impact Factor Label. It is the ideal choice for sustainable laboratories.

BRAND Mespipettes

BLAUBRAND® volumetric pipettes according to DIN EN ISO 835 are faster, safer, and easier to use. Pipetting is significantly easier.

The waiting time for BLAUBRAND® class AS volumetric pipettes has been reduced from 15 to 5 seconds. Type 2 has been added. We recommend BLAUBRAND® type 2 volumetric pipettes, as adjusting the meniscus only needs to be done once. There is a risk of dispensing too much during the second meniscus adjustment for type 1 and 3. All BLAUBRAND® volumetric pipettes are delivered with a batch number and certificate. Available upon request with a single certificate, USP single certificate, or DAkkS calibration certificate.

Pipette accessories

Brand

Eppendorf

BRAND Mespipettes

Frequently Asked Questions