For liquid flows down to 5 ml/sec. Wheel spins freely and speed of rotation is proportional to flow rate. Maximum recommended flow rate up to 95 ml/sec, max 2 bar pressure. Not to be used with corrosive fluids or over +85 °C. Can be used with gases.

For liquid flow from 50 ml/min in horizontal position, and 140 ml/min in vertical position. Minimum air flow 3 l/min horizontal and 8 l/min vertical. Speed of rotation of ball proportional to flow. Not to be used with corrosive fluids or over +50 °C.

With 3 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

With 2 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380 mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

Long flex life, high-precision tubing with 3 colour-coded bridges. Suitable for peristaltic pumps and for food and beverage dispensing. Contains no BPA or phthalates. Broad resistance to acids and alkalis. Meets USP Klasse VI and ISO 10993.

Transparent. Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mm1.5 m discharge tube, PVCStopcock made of PP/PE

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 8 mm

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 8 mm

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 4 barFor tubing ID 12 mm

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 4 barFor tubing ID 8 mm

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 12 mm

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 12 mm

Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size

Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 4 barFor tubing ID 8 mm

Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size

Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size

These pump drives are able to be configured for multi-channel use: Value 01, Advantage 01, Precision 01Increased output by running up to 12 individual cassettes on one single pump drive and pump head systemSeparate metering into multiple vessels with different feed rates at the same time by using different tubing dimensions to adjust flow ratesEasy and quick tubing changeIn addition to standard pump heads which feature a 4 roller system, 8 roller pump heads are available for low pulsationEasy change of cassettes, even during operationCassettes adjustments and changes are simple due to click systemWith possibility to upgrade the pump drive with an adapter for multi-channel operationAccepts 12 cassettes smallBuilt-in reduction gear allows feeding of smallest quantities8 rollers minimizing pulsation

Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.Feed direction reversibleFor safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheatingPump heads with convex rollers for cell protection are available for use in cell biologyThe flow rate depends on the used pump head. The pump head is not included. Please order separately.With an optional pump head adapter the Hei-FLOW Core 120 can be upgraded for multi-channel operation.

Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interfacePre-programmed flow characteristics are shown in the displayDigital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause functionWith buttons for selecting all process parametersEasy calibration of flow volume and flow rateSmooth start operation prevents from spills and splashing mediaA press of the max button accelerates the filling and draining of the tubingFor safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheatingOptional foot switch to operate pump drive in closed fume hoods and to facilitate filling operationsPump heads with convex rollers for cell protection are available for use in cell biologyThe pump head is not included. Please order separately.With an optional pump head adapter the Hei-FLOW Ultimate 120 can be upgraded for multi-channel operation.

Feed pump for reproducible results. The speed is adjustable with the analog control knob, and the electronic speed control guarantees constant speeds even under changing loads.Speed, direction of rotation and on/off function is controllable with an analog interfaceA press of the max. button accelerates the filling and draining of the tubingFor safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheatingOptional pump heads with convex rollers for cell protection are available for use in cell biologyOptional footswitch to operate pump drive in closed fume hoods and to facilitate filling operationsThe flow rate depends on the used pump head. The pump head is not included. Please order separately.With an optional pump head adapter the Hei-FLOW Expert 120 can be upgraded for multi-channel operation.