Depth:
191 mm
|
Dimensions (WxDxH):
226 x 191 x 150 mm
|
Height:
150 mm
|
Manufacturer Article Number:
788111
|
Max. capacity:
10 ml
|
Max. flow rate:
25.99 ml/min
|
Min. capacity:
0.5 µl
|
Min. flow rate:
1.28 pl/min
|
No. of syringes:
2
|
Type:
Legato® 111
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
2.7 kg
|
Width:
226 mm
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Nanoliter Pump. Based on the Legato® 101 model, suitable for infusion and withdrawal of liquids. Includes multi-mode operations and multi-step programs.
Depth:
191 mm
|
Dimensions (WxDxH):
226 x 191 x 150 mm
|
Height:
150 mm
|
Manufacturer Article Number:
788110DRS
|
Max. capacity:
60 ml
|
Max. flow rate:
88.28 ml/min
|
Min. capacity:
0.5 µl
|
Min. flow rate:
1.28 pl/min
|
No. of syringes:
1
|
Type:
Legato® 110 DRS
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
2.7 kg
|
Width:
226 mm
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual syringe pump combination. Two Legato® 110 pumps connected by an input/output cable. Both pumps can be started synchronously and operated at different flow rates. The Legato® 110 is based on the Legato® 100. It offers infuse/withdraw flow control and programmability for up to two multi-step programs of 50 steps each. This pump is ideal for more complex multi-step dosing and has multi-mode operation.
Depth:
254 mm
|
Dimensions (WxDxH):
279 x 254 x 165 mm
|
Height:
165 mm
|
Manufacturer Article Number:
788210
|
Max. capacity:
140 ml
|
Max. flow rate:
215.80 ml/min
|
Min. capacity:
0.5 µl
|
Min. flow rate:
3.06 pl/min
|
No. of syringes:
2
|
Type:
Legato® 210
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
5.0 kg
|
Width:
279 mm
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Infusion/Withdraw Pump. This unit supports infuse only, withdraw only, infuse/withdraw, withdraw/infuse and continuous mode. User defined flow rates with selectable target volumes.
Depth:
191 mm
|
Dimensions (WxDxH):
226 x 191 x 150 mm
|
Height:
150 mm
|
Manufacturer Article Number:
788100
|
Max. capacity:
60 ml
|
Max. flow rate:
88.28 ml/min
|
Min. capacity:
0.5 µl
|
Min. flow rate:
1.26 pl/min
|
No. of syringes:
1
|
Type:
Legato® 100
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
2.7 kg
|
Width:
226 mm
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsSingle Syringe Infusion Pump. This pump is ideal for applications where a single syringe is used.
Depth:
191 mm
|
Dimensions (WxDxH):
226 x 191 x 150 mm
|
Height:
150 mm
|
Manufacturer Article Number:
788180
|
Max. capacity:
10 ml
|
Max. flow rate:
11.70 ml/min
|
Min. capacity:
0.5 µl
|
Min. flow rate:
0.58 pl/min
|
No. of syringes:
2
|
Type:
Legato® 180
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
2.7 kg
|
Width:
226 mm
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Picoliter Infusion/Withdraw Pump. For low flow with program options for 2 programs. 50 steps each. User definable flow rates with selectable target volume or time values to control the total infusion volume.
Depth:
191 mm
|
Dimensions (WxDxH):
226 x 191 x 150 mm
|
Height:
150 mm
|
Manufacturer Article Number:
788101
|
Max. capacity:
10 ml
|
Max. flow rate:
25.99 ml/min
|
Min. capacity:
0.5 µl
|
Min. flow rate:
1.28 pl/min
|
No. of syringes:
2
|
Type:
Legato® 101
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
2.7 kg
|
Width:
226 mm
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Nanoliter Pump. This infusion only pump is ideal for applications where dual syringes are required with small volumes under 10 ml.
Accuracy:
1 %
|
Accuracy:
±1 %
|
Depth:
139.7 mm
|
Dimensions (WxDxH):
177.8 x 139.7 x 266.7 mm
|
Height:
266.7 mm
|
Manufacturer Article Number:
10103468
|
Max. capacity:
50 ml
|
Max. flow rate:
6000 µl/s
|
Max. voltage:
240 V
|
Min. capacity:
1.0 µl
|
Min. flow rate:
0.003 µl/s
|
Min. voltage:
100 V
|
No. of syringes:
2
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ML715-DIL Dual Diluter Advanced
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
5.9 kg
|
Width:
177.8 mm
Dilute with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 diluter system is a high-precision syringe pump with a graphical user interface that quickly and easily dilutes volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDual Syringe DiluterUse two syringes to create up to a 1:50,000 dilution in a single stepDrastically reducing preparation time and wasted bufferWashes the tubing between each sampleDilute with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 diluter system is a high-precision syringe pump with a graphical user interface that quickly and easily dilutes volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDual Syringe DiluterUse two syringes to create up to a 1:50,000 dilution in a single stepDrastically reducing preparation time and wasted bufferWashes the tubing between each sample
Accuracy:
1 %
|
Accuracy:
±1 %
|
Depth:
139.7 mm
|
Dimensions (WxDxH):
177.8 x 139.7 x 266.7 mm
|
Height:
266.7 mm
|
Manufacturer Article Number:
10103460
|
Max. capacity:
50 ml
|
Max. flow rate:
6000 µl/s
|
Max. voltage:
240 V
|
Min. capacity:
1.0 µl
|
Min. flow rate:
0.003 µl/s
|
Min. voltage:
100 V
|
No. of syringes:
1
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ML720-DIS Single Disp Premium
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
5.9 kg
|
Width:
177.8 mm
Dispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/output
Accuracy:
1 %
|
Accuracy:
±1 %
|
Depth:
139.7 mm
|
Dimensions (WxDxH):
177.8 x 139.7 x 266.7 mm
|
Height:
266.7 mm
|
Manufacturer Article Number:
10103464
|
Max. capacity:
50 ml
|
Max. flow rate:
6000 µl/s
|
Max. voltage:
240 V
|
Min. capacity:
1.0 µl
|
Min. flow rate:
0.003 µl/s
|
Min. voltage:
100 V
|
No. of syringes:
2
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ML725-DIS Dual Disp Premium
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
5.9 kg
|
Width:
177.8 mm
Dispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/output
Accuracy:
1 %
|
Accuracy:
±1 %
|
Depth:
139.7 mm
|
Dimensions (WxDxH):
177.8 x 139.7 x 266.7 mm
|
Height:
266.7 mm
|
Manufacturer Article Number:
10103470
|
Max. capacity:
50 ml
|
Max. flow rate:
6000 µl/s
|
Max. voltage:
240 V
|
Min. capacity:
1.0 µl
|
Min. flow rate:
0.003 µl/s
|
Min. voltage:
100 V
|
No. of syringes:
2
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ML725-DTHP Dual Disp Tip Hand Probe Premium
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
5.9 kg
|
Width:
177.8 mm
Dilute with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 diluter system is a high-precision syringe pump with a graphical user interface that quickly and easily dilutes volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDual Syringe DiluterUse two syringes to create up to a 1:50,000 dilution in a single stepDrastically reducing preparation time and wasted bufferWashes the tubing between each sampleDilute with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 diluter system is a high-precision syringe pump with a graphical user interface that quickly and easily dilutes volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDual Syringe DiluterUse two syringes to create up to a 1:50,000 dilution in a single stepDrastically reducing preparation time and wasted bufferWashes the tubing between each sample
Accuracy:
1 %
|
Accuracy:
±1 %
|
Depth:
137.7 mm
|
Dimensions (WxDxH):
177.8 x 137.7 x 266.7 mm
|
Height:
266.7 mm
|
Manufacturer Article Number:
10103458
|
Max. capacity:
50 ml
|
Max. flow rate:
6000 µl/s
|
Max. voltage:
240 V
|
Min. capacity:
1.0 µl
|
Min. flow rate:
0.003 µl/s
|
Min. voltage:
100 V
|
No. of syringes:
1
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ML710-DIS Single Disp Advanced
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
5.9 kg
|
Width:
177.8 mm
Dispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/output
Accuracy:
1 %
|
Accuracy:
±1 %
|
Depth:
139.7 mm
|
Dimensions (WxDxH):
177.8 x 139.7 x 266.7 mm
|
Height:
266.7 mm
|
Manufacturer Article Number:
10103461
|
Max. capacity:
50 ml
|
Max. flow rate:
6000 µl/s
|
Max. voltage:
240 V
|
Min. capacity:
1.0 µl
|
Min. flow rate:
0.003 µl/s
|
Min. voltage:
100 V
|
No. of syringes:
2
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ML715-DIS Dual Disp Advanced
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
5.9 kg
|
Width:
177.8 mm
Dispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/output
Depth:
254 mm
|
Dimensions (WxDxH):
279 x 254 x 165 mm
|
Height:
165 mm
|
Manufacturer Article Number:
788200
|
Max. capacity:
140 ml
|
Max. flow rate:
215.80 ml/min
|
Min. capacity:
0.5 µl
|
Min. flow rate:
3.06 pl/min
|
No. of syringes:
2
|
Type:
Legato® 200
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
5.0 kg
|
Width:
279 mm
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Infusion Pump. This unit supports infuse only. User definable flow rates with selectable target volumes or time values to control the total infusion volume.
Depth:
153 mm
|
Dimensions (WxDxH):
230 x 153 x 130 mm
|
Height:
130 mm
|
Manufacturer Article Number:
789100
|
Max. capacity:
60 ml
|
Max. flow rate:
7.05 ml/min
|
Min. capacity:
10 µl
|
Min. flow rate:
0.0017 µl/min
|
No. of syringes:
1
|
Type:
KDS 100
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
2 kg
|
Width:
230 mm
Economical Single-Syringe Infusion Pump combining precision flow with outstanding ease-of-use and exceptional durability.For single syringes from 10 µl to 60 ml, any manufacturerSimple menu-driven setup (select syringe size from displayed table, set dispense volume and flow rate)Easy to read bright, backlight displayDispense volume displayed and has automatic shutoff at completionVolume and flow rate units (µl/h or ml/h) are selected automatically based on syringe sizeLast settings stored in permanent memoryButton release of drive nut for easy syringe installationChoice of run/stop after a power interruption
Depth:
254 mm
|
Dimensions (WxDxH):
279 x 254 x 165 mm
|
Height:
165 mm
|
Manufacturer Article Number:
788272
|
Max. capacity:
140 ml
|
Max. flow rate:
215.80 ml/min
|
Min. capacity:
0.5 µl
|
Min. flow rate:
3.06 pl/min
|
No. of syringes:
2
|
Type:
Legato® 270P
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
5.0 kg
|
Width:
279 mm
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Push/Pull Syringe Pump. This unit supports infuse only, withdraw only, infuse/withdraw, withdraw/infuse and continuous mode. User defined flow rates with selectable target volumes. Features additional user defined configurations/programs of up to 800 steps. Up to 40 programs of 20 steps each step can be stored in memory.
Depth:
254 mm
|
Dimensions (WxDxH):
279 x 254 x 165 mm
|
Height:
165 mm
|
Manufacturer Article Number:
788212
|
Max. capacity:
140 ml
|
Max. flow rate:
215.80 ml/min
|
Min. capacity:
0.5 µl
|
Min. flow rate:
3.06 pl/min
|
No. of syringes:
2
|
Type:
Legato® 210P
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
5.0 kg
|
Width:
279 mm
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsDual Syringe Infusion/Withdraw Pump. This unit supports infuse only, withdraw only, infuse/withdraw, withdraw/infuse and continuous mode. User defined flow rates with selectable target volumes. Features additional multi-step programming with user defined configurations/programs of up to 1000 steps. Up to 40 programs of 25 steps each can be stored in memory.
Depth:
191 mm
|
Dimensions (WxDxH):
226 x 191 x 150 mm
|
Height:
150 mm
|
Manufacturer Article Number:
788110
|
Max. capacity:
60 ml
|
Max. flow rate:
88.28 ml/min
|
Min. capacity:
0.5 µl
|
Min. flow rate:
1.28 pl/min
|
No. of syringes:
1
|
Type:
Legato® 110
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
2.7 kg
|
Width:
226 mm
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsSingle Syringe Infusion/Withdraw Pump. The Legato® 110 is based on the Legato® 100. It offers infuse/withdraw flow control and programmability for up to two multi-step programs of 50 steps each. This pump is ideal for more complex multi-step dosing and has multi-mode operation.
Accuracy:
1 %
|
Accuracy:
±1 %
|
Depth:
139.7 mm
|
Dimensions (WxDxH):
177.8 x 139.7 x 266.7 mm
|
Height:
266.7 mm
|
Manufacturer Article Number:
10103465
|
Max. capacity:
50 ml
|
Max. flow rate:
6000 µl/s
|
Max. voltage:
240 V
|
Min. capacity:
1.0 µl
|
Min. flow rate:
0.003 µl/s
|
Min. voltage:
100 V
|
No. of syringes:
2
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ML715-CNT Dual Continuous Disp Advanced
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
5.9 kg
|
Width:
177.8 mm
Dispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDispense with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 dispenser system is a high-precision syringe pump with a graphical user interface that quickly and easily dispenses volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/output
Depth:
191 mm
|
Dimensions (WxDxH):
226 x 191 x 150 mm
|
Height:
150 mm
|
Manufacturer Article Number:
788180SGL
|
Max. capacity:
10 ml
|
Max. flow rate:
11.70 ml/min
|
Min. capacity:
0.5 µl
|
Min. flow rate:
0.54 pl/min
|
No. of syringes:
1
|
Type:
Legato® 185
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
2.7 kg
|
Width:
226 mm
The Legato® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).Single and dual syringe infuse, infuse withdraw & continuous modelsHolds syringe sizes from 0.5ul to 140 ml (Model dependent)Flow rates down to the picoliter/min (Model dependent)Programmable interface without the need for a PC (Model dependent)USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only)Rugged construction with cold rolled steel chassisApplications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic InjectionsSingle Syringe Infusion/Withdraw Pump. It offers infuse/withdraw flow control and programmability for up to two multi-step programs of 50 steps each. This pump is ideal for more complex multi-step dosing and has multi-mode operation. Minimum flow rate only 0.54 pl/min.
Accuracy:
1 %
|
Accuracy:
±1 %
|
Depth:
139.7 mm
|
Dimensions (WxDxH):
177.8 x 139.7 x 266.7 mm
|
Height:
266.7 mm
|
Manufacturer Article Number:
10103471
|
Max. capacity:
50 ml
|
Max. flow rate:
6000 µl/s
|
Max. voltage:
240 V
|
Min. capacity:
1.0 µl
|
Min. flow rate:
0.003 µl/s
|
Min. voltage:
100 V
|
No. of syringes:
2
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ML725-DIL Dual Diluter Premium
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105104
|
Weight:
5.9 kg
|
Width:
177.8 mm
Dilute with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 diluter system is a high-precision syringe pump with a graphical user interface that quickly and easily dilutes volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDual Syringe DiluterUse two syringes to create up to a 1:50,000 dilution in a single stepDrastically reducing preparation time and wasted bufferWashes the tubing between each sampleDilute with over 99% accuracy, regardless of a liquid's viscosity, vapour pressure and temperature.The Microlab® 700 diluter system is a high-precision syringe pump with a graphical user interface that quickly and easily dilutes volumes from 10 μl to 50 ml.The software provides a variety of security protection:Simplifies adherence to FDA GXP regulationsAbility to administer user accounts and passwordsCreate log files that conform to 21 CFR Part 11Manage log files on a PC using the LyncStore application only for premium version.Printer set optionally availableSyringe Pump FeaturesHigh torque valve motorsPrecision syringe drives with 48,000 step resolution over 60 millimeterIlluminated power and prime buttonsIndependent left and right trigger portsFanless heat vent24 volt power inputCAN daisy chain input/outputRS-232 console portPower over Ethernet (PoE)TTL input/outputDual Syringe DiluterUse two syringes to create up to a 1:50,000 dilution in a single stepDrastically reducing preparation time and wasted bufferWashes the tubing between each sample
Ext. Ø:
8.0 mm
|
Int. Ø:
5.0 mm
|
Length:
1 m
|
Manufacturer Article Number:
760420
|
Material:
Silicone
|
Max. delivery length:
25 m
|
Max. temperature resistance:
200 °C
|
Min. temperature resistance:
-50 °C
|
Shore hardness:
60
|
Temperature resistance:
-50 ... 200 °C
|
UNSPSC:
41105108
|
Wall thickness:
1.50 mm
Versilic® 60 shore tubing is biologically inert and does not inhibit cell culture. It stays flexible down to -50 °C and maintains its chemical, mechanical and electrical performance up to 200 °C. Versilic® meets the European Pharmacopoeia requirements for silicone elastomer for closures and tubing, USP Class VI biological tests and ISO 10993 biocompatibility (systemic toxicity, irritation, sensitization, citotoxicity, hemocompatibility and Ames test).Versilic® 60 shore tubing is biologically inert and does not inhibit cell culture. It stays flexible down to -50 °C and maintains its chemical, mechanical and electrical performance up to 200 °C. Versilic® meets the European Pharmacopoeia requirements for silicone elastomer for closures and tubing, USP Class VI biological tests and ISO 10993 biocompatibility (systemic toxicity, irritation, sensitization, citotoxicity, hemocompatibility and Ames test).
Variants from €2.24*
Autoclavable:
Yes
|
Colour graduation:
Brown
|
Division:
1.0 ml
|
Manufacturer Article Number:
7.240-41
|
Material barrel:
Glass
|
Material plunger:
Steel
|
Nominal capacity:
20 ml
|
Nozzle type:
Luer lock
|
UNSPSC:
41-12-20-01
Made from neutral glass, with steel piston. Brown graduation, acid and alkali resistant. With centered Luer-slip/Luer-lock. May only be used for technical purposes. Autoclavable up to 200 °C.
Variants from €165.40*
Colour:
Clear
|
Int. Ø:
2.79 mm
|
Manufacturer Article Number:
070534-24L-ND
|
Max. temperature resistance:
74 °C
|
Min. temperature resistance:
-50 °C
|
Shore hardness:
55 A
|
Temperature resistance:
-50 ... 74 °C
|
UNSPSC:
41105108
|
Wall thickness:
0.85 mm
Transparent. Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Long working lifespan. Good resistance to acids and alkalis. Food-safe.
Description:
Labels for Microlab Label Printer
|
For:
Microlab® 700
|
Manufacturer Article Number:
10106806
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*