Natural colouring. Conical in shape with tapered filling edge. Food-safe product according to regulation (EU) No. 10/2011.
Measuring scoops which are also suitable as weighing scoops. With precision formed filling edge and comfortable, stable handle. Easily readable volume quantities on the upper side of the handle. Food-safe product according to regulation (EU) No. 10/2011.
Transparent. Rapid flow due to a steep 60° angle. Practical handle with loop for hanging. Food-safe product according to regulation (EU) No. 10/2011.
Highly transparent. With moulded, blue graduations, spout and stable, easy-grip handle. Food-safe product according to regulation (EU) No. 10/2011. To preserve markings, do not clean at temperatures exceeding 60 ºC. Conditionally autoclavable at 121 °C (2 bar) according to DIN EN 285. For autoclaving, we recommend the design with raised graduations.
Highly transparent. With easily readable, raised, embossed blue scale and ring marks at the primary scale points. Calibrated 'In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. To preserve markings, do not clean at temperatures exceeding 60ºC.Food-safe product according to regulation (EU) No. 10/2011.
Tall form. Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN. Class B tolerances according to DIN 12681/ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 60 ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
Also suitable as weighing scoops. Easily readable volume quantities on the upper side of the handle.Food-safe product according to regulation (EU) No. 10/2011.
Short form. Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN. Thermal stress up to 60 ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
Transparent. For transfer of powdered and granular substances.With short, wide stemRapid flow due to a steep 60° angleWith tab for hangingFood-safe
Transparent. Rapid flow due to a steep 60° angle. Practical handle for hanging. Suitable for filling large amounts of liquids. Food-safe products according to regulation (EU) No. 10/2011.Sieve for 9251 640 and 9251 645 available (not approved as a food-safe article). Please order separately.
Transparent, in different colors. With stable handle and easily readable, printed graduations on both sides. Therefore, the volume is equally visible for left- and right handers. To preserve markings, do not clean at temperatures exceeding 60 ºC.StackableFood-safe product according to regulation (EU) No. 10/2011
Round , white with broad, stable edge and circumferential standing ring on the bottom. Food-safe product according to regulation (EU) No. 10/2011.
White. Food-safe product according to regulation (EU) No. 10/2011.
With stable handle and easily readable, printed black graduations on both sides. Therefore, the volume is equally visible for left- and right handers. To preserve markings, do not clean at temperatures exceeding 60 ºC.StackableFood-safe product according to regulation (EU) No. 10/2011
Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Products individually packaged in PE bags, labelled with the article number, description and EAN code. Thermal stress up to 80°C does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
Allround lab bottle made of polypropylene, with GL 45 thread and supplied with tamper-evident closure (PP).Excellent handling due to innovative design. In contrast to common lab bottles, the slim, waisted shape facilitates the handling of the VITgrip™ to a considerable degree. The molded volume graduations support slip-safety while working with glovesLeakproof** due to optimized sealing system of the bottle thread and the screw cap with ergonomic designEasy readability of the volume at all times due to molded, double-sided graduations with high accuracy (± 5%)Smooth pouring of liquids and easy to clean due to hydrophobic material and rounded shape without dirt catching edgesWith tamper-evident closure that reliably signals, if the bottle is still sealedAutoclavable at 121°C (2 bar) according to DIN EN 285Very good chemical resistance against most acids, bases and alcoholic solutions. Furthermore, the VITgrip™ lab bottles and the supplied VITLAB® tamper-evident closures are suitable for contact with foodstuffs (according to regulation EU No. 10/2011).**The VITgripTM lab bottles are leakproof (tested with distilled water at room temperatur and atmospheric pressure and in combination with the supplied VITLAB® screw closures. Please contact us for the detailed test conditions, if required.
Transparent. Rapid flow due to a steep 60° angle. Practical handle for hanging. Suitable for filling large amounts of liquids.
Transparent. With division into 1L segments. With stable handle and spout for easy emptying. Highly resistant to chemicals. Without lid.Food-safe product according to regulation (EU) No. 10/2011.
White. Without spout. With division into 1L segments. Stable handle with reinforcement in the middle for comfortable carrying. Food-safe product according to regulation (EU) No. 10/2011.Tightly closing, transparent LDPE lid - please order separately.
Recommendations
Complies with ISO 3819 and DIN 12331Manufactured from Pyrex® borosilicate glassTall form with spoutWhite graduations and marking spotPrinted with Trace Code for downloadable batch certificateBatch certificate available to download from www.scilabware.com
Mechanically stronger than standard beakersDesigned for longer life and increased user safetyReinforced rims and spout, less prone to breakage during washing etc.Thicker walls and heavier basesManufactured from Pyrex® borosilicate glassWhite graduations and marking spot
Transparent, in different colors. With stable handle and easily readable, printed graduations on both sides. Therefore, the volume is equally visible for left- and right handers. To preserve markings, do not clean at temperatures exceeding 60 ºC.StackableFood-safe product according to regulation (EU) No. 10/2011
ISO 3819. With approximate graduations and spout. With easy-to-read scale and large labelling field for easy marking, in fired-on, highly durable white ceramic. Due to the uniformly wall thickness, it is suitable for use as a heating vessel. Glass Type I / neutral glass as per USP, EP and JP. With retrace code (Batch Identification). Certificate available via the Internet. Autoclavable.
Crystal clear. With spout and easily readable, printed red scale. To preserve markings, cleaning at no higher than 60 °C is recommended. 10 ml, 150 ml, 400 ml, 600 ml Variants in addition to ISO 7056.
Actions New
PET-coated Adhesive PVC-tape with water-soluble adhesive. Available in different widths and colours.Easy to remove without stainsThickness: 0,14 mmCore: PE
Sturdy balance ideal for routine tasks in terms of fast stabilisation and accurate repeatable results as well as the large high contrast LCD display.With large draft shield with 3 sliding doors for easy accessLarge, backlit LCD display, digit height 22 mmEasy navigation through direct access to the diferent functionsComfortable formulation / documentation with separate tara print-buttonStable temperature behaviourSafe results through external calibrationOperation with power supplyWith RS232 interface
This beard mask has a detectable strip on the inside. That's why it can be detected by a dector machine at any time- even if the beard mask gets into the production.air-permeable and breathableideal for special hygienc-sensitive areas
The bottle-top dispenser makes liquid dosing easy and secure.Analog volume displayQuickly adjustable dosing volumeVolume selection with interior scalloped trackSimple calibration adjustment with a supplied toolValve system - tight sealing without additional sealing ringsFilling valve, olive-shapedAutoclavable at 121 °CScope of supply:Bottletop dispensers Dispensette® S, DE-M marked, performance certificate, telescope filling tube, mounting tool, adapters made of PPYellow color code. Ideal for dispensing organic solvents, e.g., chlorinated and fluorinated hydrocarbons such as trichlorotrifluoroethane and methylene chloride, or concentrated acids such as HCl and HNO3 (not HF) as well as trifluoroacetic acid (TFA), tetrahydrofuran (THF) and peroxides.
The combination of a springless PTFE valve and PTFE piston with chemically resistant ETP O-ring enables dispensing of both organic reagents as well as bases, thus, eliminating the need to buy different dispensers for different applications. The improved design of the uniTOPDISPENS 2 bottle top dispenser including a re-circulation valve allows a smooth, precise and reliable bubble free dispensing without any loss of reagent. The specially designed bottle adaptor which permits a 360° rotation of the unit, the easy volume setting as well as the flexible delivery nozzle underline the user friendliness of this bottletop dispenser. Available in six volume ranges.Springless PTFE valve, PTFE piston with chemically resistant ETP O-ring enables high chemical compatibility Glass cylinder from borosilicate glass 3.3Re-circulation valve enables easy priming and bubble free dispensingSmooth, reproducible and effortless dispensing360° rotation possible due to specially designed bottle adapterFlexible and adjustable delivery nozzle provides dispensing angle flexibility to the userSpecially designed volume adjustment knob for quick and easy volume settingThe telescopic extractable intake tube can be easily adjusted to varying bottle heightsNozzle cap reduces contact with air and prevents drying and dripping if the tip cover is attachedFive bottle adaptors included (28 mm, 32 mm, 37 mm, 40 mm and 45 mm). Standard thread: 30 mm.Fully autoclavable at 121 °C, 15 psi for 10 to 15 minIndividually calibrated in accordance with ISO 8655 standards and each unit is supplied with an individualcalibration certificateYou can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.3 years warranty