Filter
Filter
CertoClav Sterilizer GmbH
Accessories for Autoclaves, CertoClav
Description:
Exhaust hose
|
For:
EL, Classic, MultiControl, MultiControl 2
Service kit 1: with lid gasket, valve gasket, gasket for exhaust cock and manometer, steam valveService kit 2: with lid gasket, control valve gasket, seals for exhaust cock and pressure gauge, steam valve and safety valveService kit 3: with door gasket, safety valve and bacteria filter
€18.00*
R. ESPINAR S.L. (Raypa)
Accessories for autoclaves, TLV series
Description:
Barcode scanner
€114.00*
HMC-EUROPE GmbH
Accessories for benchtop autoclaves HMT FA/-MA and -MB series
Depth:
183 mm
|
Description:
Sterilizing box for HMT 230 FA, MA
|
Dimensions (WxDxH):
345 x 183 x 130 mm
|
Height:
130 mm
|
Width:
345 mm
€105.00*
HMC-EUROPE GmbH
Accessories for HG series steam sterilisers
Description:
Built-in printer HG
€274.00*
HMC-EUROPE GmbH
Accessories for HV series steam sterilisers
Baskets per autoclave:
3
|
Description:
Stainless steel sterilising basket for HV-50
|
Internal dimensions (Ø x H) mm:
270 x 220
€240.00*
Adolf Wolf -SANOclav
Accessories for Laboratory autoclaves MCS models with heating
Description:
Safety locking
€490.50*
Ritter GmbH
Accessories for polySteribox®
Description:
Permanent filterset for polysteribox® L + XL
€14.30*
SHP Steriltechnik AG
Accessories for Steam steriliser Laboklav 25
Description:
Insert with 4 trays
€112.00*
R. ESPINAR S.L. (Raypa)
Accessory baskets for Digital vertical autoclaves, AES series
Baskets per autoclave:
2 / 3
|
For:
AES 75 - 110
|
Height mm:
280
|
Type:
Mesh basket
|
Ø mm:
370
€164.00*
interscience
Autoclave deodorant Anabac®
Description:
Eucalyptus fragrance
|
Type:
Classic
Laboratories are very concerned about hygiene, cleanliness and comfort in the workplace. Try Anabac® autoclave deodorant balls to improve the working environment in the laboratory. These autoclave deodorant balls bring a discrete scent that speaks of cleanliness.You can find ordering information for all articles described above as well as other articles online.Hazardous Substance DataGHSSignal wordGefahrH-SatzH226, H304, H315, H317, H411P-SatzP210, P233, P240, P241, P242, P243, P261, P264, P272, P273, P280, P301+P310, P302+P352, P303+P361+P353, P321, P331, P332+P313, P333+P313, P362+P364, P370+P378, P391, P403+P235, P405, P501UNNR1266SDSLink
€120.00*
interscience
Autoclave deodorant Anabac® natural
Description:
Natural coconut fragrance
|
Type:
Coconut
Anabac® natural is an autoclave deodorant with 100% natural perfume, obtained from natural extracts. The ball dissolves without residue during autoclaving and the perfume is released. Autoclaving processes are not affected. Compatible with all autoclavesBiodegradableECOCERT certified according to the COSMOS standardHazardous Substance DataSDSLink
€93.60*
Bel-Art Products
Autoclave thermometer
Description:
Autoclave thermometer
Durable bi-metal thermometer with a maximum registering pointer (red), moved up by the temperature measuring pointer, (black), to indicate the highest temperature achieved, and remains there until it is manually reset.Traceable to NIST StandardThreaded connection (1/4" NPT), screws directly into in-line processes, can be used to mount thermometer on included standWaterproof and pressurised, withstands autoclave cycles and has a removable protective silicone sleeve to prevent moisture from making contact with the dialConstructed from 304 stainless steel with a glass lens; withstands pressure, high temperatures and rustTested and inspected in the USAIncludes a multi-language (English, French, German, Italian, Portuguese, and Spanish) Statement of Accuracy and instructionsAvailable as an option with an individual Thermometer Calibration ReportSpecificationsMeasuring range:-20 to +150 °CProbe length:50 mm
€95.50*
HMC-EUROPE GmbH
Benchtop-Autoclaves HMT FA/-MA and -MB series
Capacity l:
16
|
Chamber diam. x depth mm:
230 x 410
|
Height:
410 mm
|
Length mm:
594
|
Rating kW:
1.9
|
Type:
HMT 230 MA
|
Width mm:
522
HMT 230/260 FA - for standard tasks:Certified according to regulation 93/42/EECAvailable in 2 sizes with a volume of 16 or 24 liters9 sterilization programs, fully automatic: 121 °C wrapped / unwrapped solid items; with or without drying, 135 °C wrapped / unwrapped solid items; with or without drying, Liquid program: 121 °C, 40 min.Controlled by a microprocessorSimple digital displayWater tankElectromechanical overheating protectionSafety valveMechanical pressure-dependent door lockReset/emergency buttonEasy maintenanceHMT 230/260/300 MA - versatile table-top autoclave:Certified according to regulation 93/42/EECAvailable in 3 sizes with a volume of 16, 24 or 40 litersPowerful integrated vacuum pump, an essential feature for sterilizing tubes and hollow components7 sterilization programs, fully automatic: 121 °C wrapped / unwrapped (vacuum), 134 °C wrapped / unwrapped (vacuum), Liquid and prion programs, Bowie-Dick testControlled by a microprocessorProgress indicatorInternal water tankElectromechanical overheating protectionElectronic overpressure protectionPressure safety valveMechanical pressure-dependent door lockReset/emergency buttonEasy maintenanceHMT 260/300 MB - premium table-top autoclave:Certified according to regulation 93/42/EECAvailable in 2 sizes with a volume of 24 or 40 litersPowerful integrated vacuum pump, an essential feature for sterilizing tubes and hollow components5 sterilization programs, fully automatic: Sterilization of wrapped items: 121 °C - 30 min.; 134 °C - 15 min., Sterilization of unwrapped items: 121 °C - 15 min.; 134 °C - 4 min., Individual temperature selection from 105° to 135 °C, Preset prion program3 test programs: leakage test, helix test, Bowie-Dick testControlled by a microprocessorEasy operation with a LCD displayDocumentation / data storage via SD card and printerDrying program, 1- 60 minutes4 literwater tank, to be filled manually or automatically (purified water)Various safety features, e.g. safety valve or pressure-dependent door lockWith modern design, easy maintenance
€4,995.00*
3M Deutschland GmbH
Biological Indicators Attest™ for Control of Steam Autoclaves
Type:
Biological Indicators Attest™ for steam autoclaves, brown cap
Biological control involves the use of indicators, which check whether all microorganisms were killed during the sterilisation process. The bio-indicators are unique, as they directly indicate how many microbial spores have actually been killed. Thanks to the reliability and quality of the information, the regular use of a bio-indicator can lead to an improvement in the performance of the sterilisation process and thus to better results.Features:No external laboratory is required for performance evaluationEasy handlingReasonable to use after repairs or maintenance of autoclavesApplication:Program 3.5 minutes, holding time at 121 °C or 134 °CAfter sterilisation, break the vial in order to bring the nutrient solution into contact with the spore stripResults in 48 hoursMeets EN ISO 11138 standard
€391.50*
PMS TIP TEKNOLOJILERI
Bowie-Dick Test Pack
Description:
Bowie-Dick-Test (4 kg)
These Bowie-Dick Test Packs are pre-assembled, single use test packs designed to evaluate the performance of the air removal system of pre-vacuum assisted sterilisers in compliance with EN 285 and operating at 134 °C and 3.5 minutes. An indicator sheet printed with water based, non-toxic chemical indicator is placed in the center of each pack. The uniform colour change of the indicator after steam sterilisation indicates that all air was removed and replaced by steam. The backside of the indicator sheet contains fields to be filled out and it can be kept as a permanent record for traceability purposes.Disposable, pre-assembled and ready to use test packsDesigned for STEAM sterilization at 134 °C - 3.5 minutes.Clean and accurate indicator color changeIndicator sheet can be kept as a permanent recordValidated for 4 kg and 7 kg sterilisation loadManufactured in absence of lead or other heavy metals
€131.70*
R. ESPINAR S.L. (Raypa)
Digital horizontal autoclave Type AH
Capacity l:
50
|
Chamber diam. x depth mm:
400 x 400
|
Height mm:
630
|
Length mm:
780
|
Power W:
2000
|
Type:
AHS-50 DRY
|
Width mm:
760
This autoclave is microprocessor controlled and monitored with 10 sterilisation programmes of which 4 are fixed and 6 are freely selectable and has bacteriological filters included by default.Operating temperature range 100 °C to 134 °COn request, also available with B ClassRS 232 interfaceFully automatic functionsWith water reservoir, pre-vacuum and dryingCase and lid shrouding are AISI 304 stainless steelSterilisation chamber, lid and sealing system are AISI 316 stainless steelElectrical heating with protected heating elementsSafety pressure valveSafety thermostatAutomatic steam controlled by Touch Screen microprocessorManual valves for emptying the sterilisation chamber and for draining steamEquipped with mesh stand on the chamber base and traysSupply requirements: 230 V 16 A single phaseOn request also available counter-pressure, steam generator or without vacuum and drying.
€5,541.00*
R. ESPINAR S.L. (Raypa)
Digital vertical autoclaves, AES series
Capacity l:
50
|
Chamber diam. x depth mm:
300 x 700
|
Height mm:
1300
|
Length mm:
560
|
Power W:
3200
|
Type:
AES-50
|
Width mm:
510
These autoclaves are microprocessor controlled and monitored with 10 sterilisation programmes of which 4 are fixed and 6 are freely programmable.Operating temperature range 100 °C to 134 °COn request also available with with vacuum pump and steam generatorAgar modus (40 °C to 80 °C)RS 232 interfaceTimerProgrammable auto-start (24 h)Fully automatic functionsCase and lid shrouding are AISI 304 stainless steelSterilisation chamber, lid and sealing system are AISI 316 stainless steelElectrical heating with protected heating elements in the interior of the chamberSafety pressure valveSafety thermostatAutomatic steam controlled by microprocessorManual valves for emptying the sterilisation chamber and for draining steamSupply requirements:AES-12 and AES-75: 230 V 16 A single phaseAES-110 and AES-150: 400 V + Neutral (3-phase)
€4,809.00*
PMS TIP TEKNOLOJILERI
Heat-Sealable Sterilization Pouches
Description:
flat
|
Dimensions mm:
75 x 200
Heat-sealable sterilisation pouches and reels as a packaging solution for sterilisation applications, ensure reliable protection of the medical device against contamination with bacteria from the time of sterilisation until use of the sterile medical device. Flat and gusseted type and wide range of standard sizes allow optimum choice of correct sized packaging of each item. The sterilisation reels and pouches are constructed from transparent PET/PP multi-layer copolymer film and medical grade paper. Water based, non-toxic process indicators for steam and ethylene oxide sterilisation (complying with ISO 11140-1) are applied on the paper surface. This helps differentiating between processed and unprocessed packages.Reinforced film to avoid tearing during openingClean and accurate indicator colour changeTear, fibre-free opening and aseptic presentationTriple band seal for higher package integrityThe sterilisation pouches and reels are effective barriers against germs and according the requirements of ISO 11607, EN 868-5 and ISO 11140-1 standards.
From
€21.40*
Key Surgical GmbH
Indicator tape for steam, hot air and gas sterilisation
Figure:
e
|
Width mm:
19
|
With:
Hot air indicator
|
colour change:
green / brown
Crepe paper, adhesive. With indicator. Colour changes according to DIN EN ISO 11140-1. Rolls of 50 m.
From
€10.12*
CertoClav Sterilizer GmbH
Laboratory autoclaves CertoClav Connect
Capacity l:
18
|
Type:
Connect
|
Weight kg:
16
|
Working Temp. range °C:
20 ... 140
Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.The fully automated, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST Test, pressure vessel test, ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. It is operated via of a 7-inch high-resolution tablet. All operating steps are explained with videos directly on the tablet. Compliance with GLP requirements through automatic documentation of users and cycles. Process protocols are stored in the CertoCloud for 10 years. Integration into laboratory data systems possible. For autoclaving liquids, a PT100-media sensor is optionally available.Scope of suppy: Autoclave, stable instrument panel with 3 feeds, minimum water level indicator, power cable, tabletSpecificationsChamber diameter:260 mmChamber depth:350 mmAir evacuation:Fractional flow procedureChamber material:Stainless steel 316LOperating pressure:2.7 barHeating capacity:1300 WPower supply:230 V ±10 % / 50 - 60 Hz* only available in conjunction with a new device
€482.00*
CertoClav Sterilizer GmbH
Laboratory autoclaves CertoClav MultiControl 2
Capacity l:
18
|
Type:
MultiControl 2
|
Weight kg:
9.5
|
Working Temp. range °C:
20 ... 140
Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.The PT100 sensor-controlled, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST test, pressure vessel test und ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. Basic version of PC software for data monitoring is included. With this software, you can only set single-step programs. For multi-step programs, PC software professional version is required.The CertoClav MultiControl 2 Touch is additionally equipped with a 7-inch robust high-resolution tablet. The operating steps are explained with videos on the screen.Programmable from 1 minute to 30 days and from room temperature to 140 °CAutomated process control and error detectionUSB portPrinter port (RS232) for printing sterilisation protocolsScope of suppy:MultiControl 2: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controllerMultiControl 2 touch: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller, tabletSpecificationsChamber diameter:260 mmChamber depth:350 mmAir evacuation:Fractional flow procedureChamber material:Stainless steel 316LOperating pressure:2.7 barHeating capacity:1300 WPower supply:230 V ±10 % / 50 - 60 Hz
€3,470.00*
biomedis Vertriebsges. mbH
Laboratory autoclaves D-line
Capacity litres:
94
|
Chamber diam. x depth mm:
380 x 690
|
Dimensions (W x D x H) mm:
730 x 700 x 1000
|
Type:
3870 ELV-CGD
The features of the laboratory autoclave line are specifically designed for most common laboratory applications and can be used for the sterilzation of liquids, instruments, glass, waste and for the preparation of nutrient media.EL = horizontal loadingELV = vertical loadingEL-CGD and ELV-CGD = with integrated steam generator and rapid coolingStores the last 200 cycles in built-in memoryOption: second flexible Pt 100 probe30 Identification Codes and Passwords for access level controlThe controller and software comply with the 21 CFR part 11 standardFilter replacement notifications based on the number of cyclesData archiving via USB interfaceDouble sterilization time monitoringIn/Out test (enables technicians to check each system component separately)Sterilization temperature range up 105 °C to 137 °COptional Disinfection/Isothermal Temperature range from 60°C to 105°C7 standard sterilisation programsOptions available Fast cooling technology and ventilator to reduce cooling time additionallyVacuum pump to evacuate residual airExhaust air filtrationLifting device to elevate/to lower heavy sterilzation goodsPrinter to document the performed cycle (Please order separately)R.PC.R software allows complete control and monitoring of the autoclave
€24,322.00*
Adolf Wolf -SANOclav
Laboratory autoclaves with heating
External dimensions mm:
410 x 530
|
Pressure bar:
3
|
Temperature °C:
143
|
Type:
LaM-3-20-MCS-J
For pressurised steam sterilisation. Temperature control is monitored via a built-in PT 100 sensor. With 1 min. to 100 hours timer.An accessory media probe (Cat. No. 9.842 070), also Pt 100, can be connected. If the "media probe" button is switched on, the autoclave cools down to 60°C after sterilisation and maintains this temperature until the unit is switched off. Culture media can therefore be processed more easily.Chamber and lid made of stainless steel.La-VA-MCS.Fully automatic, 4 bar. With solenoid valve for automatically venting and pulsing steam when sterilising liquids. Safety catch is only temperature dependent when used with accessory media probe.Usable volume:20LChamber (dia. x H):260mm x 400mmSupply requirements:230V 50Hz, 1500W*manual control
€3,698.00*
Adolf Wolf -SANOclav
Media probe for Automatic autoclaves AE-Dry series
Type:
Media probe
Flexible Pt100 probe with silicone feed tube. For the sterilisation of media (liquids), in order to observe the exact temperature at set times. The probe is directly connected to the control panel IN or OUT .Media probe not retrofittable.
€1,065.60*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.10*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.10*
Steam Sterilizers-Autoclaves
The goal of sterilization is to achieve absolute sterility. Steam sterilization at 121°C or 134°C guarantees the killing of microorganisms. For this purpose, we have various table-top autoclaves as horizontal steam sterilizers and floor-standing autoclaves as vertical steam sterilizers in our product range. Suitable accessories such as a variety of destruction bags, bio-indicators, Bowie-Dick tests, sterilization indicator tapes, indicator strips as well as sterilization rolls and bags and deodorant balls complete our range.
Your watch lists
Loading...