For 1.0 to 2.0 ml test tubes and cryovials. Racks will float with a full load of filled tubes. With moulded identification numbers and letters.
Open style floating rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Tubes are held tightly in rack and can be removed easily.End handles allow easy transportStackableSteam autoclavable at 121 °C
White. Manufactured from polyfiber grade flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and always guarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -196 to 80 °C temperature range. Sticks to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. Recommended to be used on tube caps with different diameters.
Manufactured from polycarbonate with high mechanical strength and high temperature resistance between -196 to +121°C. Uniquely designed to carry 81 cryo tubes in 9 x 9 array "Hedgehog" designed tube compartments holds the tube in their position firmly. Unique design with vent and drainage holes guarantees best, efficient air circulation. Forward slope base ensures quick visual orientation. Easily stackable for reducing storage space. Hinged lid with built-in stop allows easy one-handed access to tubes. Clear box lid enables easy identification of box content and protects the tubes from dust, moisture and other environmental effects. Alphanumerical index both on tube rows and the lid enables easy identification of tube positions. Box is supplied together with a disposable forceps, made from ABS, with fine end for easy handling and fast removal of tubes.
Robust design, autoclavable. With printed grid on lid for cryovials and similar tubes up to 13.5 mm diameter (except type 5026: up to Ø 12.5 mm). Temperature resistant from -196 to 121 °C. With grid numbers for reliable identification of individual samples.
For cryogenic storage of cryotubes.9 x 9 gridGrid numerically codedRemovable grid insertsHinge with safe snap-on lidStackableDrain bores at the bottom for dew liquidTemperature resistant from -90 to 121°CAutoclavable
The set contains the colours red, blue and yellow.For storage of small samples and tubesTemperature resistant up to -196 °C
For storage of small samples and tubesTemperature resistant up to -196 °C
With screw cap, self-standing. Increase storage capacity in mechanical and gaseous phase liquid nitrogen freezers. With writing area and graduation. Gamma radiation sterilized. One-handed operation possible. DNAse/RNAse free. Pyrogen-free and non-cytotoxic. Cryovials for space-saving storage (10 x 10 per box).
With vented, insulating HDPE lid. PE covered handle. Unbreakable and completely safe for short term storage of ice water, dry ice solvents and liquid nitrogen. Also suitable for use as warming baths. Chemical-resistant, reinforced walls, filled with urethane foam, are temperature resistant from -196 to 100°C. 1, 2 and 4 litre flasks have a carrying handle.
Autoclavable. Space-saving. Choice of sizes to hold 25 or 50 cryovials of 1.2, 2.0 or 5 ml capacities. With moulded identification numbers and letters. One-handed operation possible.
With screw cap, self-standing. Increase storage capacity in mechanical and gaseous phase liquid nitrogen freezers. With writing area and graduation. Gamma radiation sterilized. One-handed operation possible. DNAse/RNAse free. Pyrogen-free and non-cytotoxic.
With screw cap, self-standing. Increase storage capacity in mechanical and gaseous phase liquid nitrogen freezers. Gamma radiation sterilized.
Made of transparent PVC. For KryoCane™ aluminium vial holder.
Stainless steel. With individual retainers to secure each box safely.
Nickel chromium steel, unbreakable, open top. With high-vacuum, permanent insulation. Temperature range -269 to 300 °C. 5 year insulation guarantee.
Reusable, economical and moisture resistant plastic. Made from polypropylene material. Easy self-assemble boxes shipped flat-packed saving space in the laboratory. More durable than card boxes as they are not susceptible to moisture. Significantly reduces the chance of mould. Suitable for repeated freezing and defrosting. Dividers included with the boxes.Store down to temperatures of -196 °C.
Robust design, autoclavable. Temperature resistant from -196 to 121 °C. With transparent PC lid, without grid.
Intended for cryogenic transportation and storage of biological material. Available in different tube types. Conform to the IATA requirements for the transport of diagnostic specimens and to the US pharmacopoeia USP Class VI. Packed in resealable zip lock bags with printed catalog no. and lot. no. Pyrogen-free. Non-toxic. Sterile (SAL 10-6). Certified RNase- and DNase-free.Warning:Do not use CryoTubes in the liquid phase of liquid nitrogen unless correctly sealed in Nunc CryoFlex™ Tubing (Cat. No. 4.009 142). Improper use may cause liquified nitrogen to be trapped inside the vial and lead to pressure build-up, resulting in possible explosion or biohazard release.
Intended for cryogenic transportation and storage of biological material. Available in different tube types. Conform to the IATA requirements for the transport of diagnostic specimens and to the US pharmacopoeia USP Class VI. Packed in resealable zip lock bags with printed catalog no. and lot. no. Pyrogen-free. Non-toxic. Sterile (SAL 10-6). Certified RNase- and DNase-free.Warning:Do not use CryoTubes in the liquid phase of liquid nitrogen unless correctly sealed in Nunc CryoFlex™ Tubing (Cat. No. 4.009 142). Improper use may cause liquified nitrogen to be trapped inside the vial and lead to pressure build-up, resulting in possible explosion or biohazard release.
For precise gripping and safe removal of cryogenic microtubes and vials from cold storage boxes. Set consisting of 5 different colours (red, purple, blue, green, and yellow).Ergonomic squeeze areaFor cryogenic vials up to Ø 13.5 mmAutoclavable at 121 °C
For precise gripping and safe removal of crimped vaccine/serum vials from cold storage boxes. Set consisting of 5 different colours (red, purple, blue, green, and yellow).Ergonomic squeeze areaFor vaccine vials up to Ø 21 mmAutoclavable at 121 °C
For cryogenic cardboard boxes 133 x 133 mm.
Cryo tubes can be welded in with CryoFlex™ tubing. Therefore they can be stored in liquid nitrogen without penetrating nitrogen into the vials and building up pressure, which can cause the tubes to burst.
Promotion
DIN 12336Flat-bottom with spoutAutoclavable
DIN 12336Flat-bottom with spout
Glazed inside and outside except for rim.
Promotion
DIN 12336Flat-bottom with spoutAutoclavable
DIN 12336Flat-bottom with spout
Glazed inside and outside except for rim.
Nitrogen tanks & accessories
Nitrogen containers made of aluminum or stainless steel are suitable for storing samples in cryoboxes, canisters, and for transportation, as well as for storing liquid nitrogen in various sizes and configurations.
Storage at cryogenic temperatures ensures unlimited lifespan and functionality for biological samples. There is a wide selection of nitrogen containers for sample storage, liquid nitrogen storage, and dewars for handling liquid nitrogen in laboratory or industrial settings. Different applications, such as in dermatology, biobanking, or industry, require different solutions. We recommend contacting us as we work with manufacturers including Airliquid, Cryo Diffusion, Cryonos, and others.