Memmert GmbH + Co. KG
Our bestsellers
The Memmert humidity chamber HCP - This climate chamber offers a full range of comfort, reliability and safety. This humidity chamber is ideally suited for environmental testing, environmental simulation, accelerated service life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.The active humidity control is the guarantee for ideal homogeneity of temperature and humidity as well as for short recovery times after opening the door. In combination with heating on all six sides, including heated inner glass door, it also minimises vaporisation in the interior and thus the risk of condensed water dripping onto the test object. An aluminium thermal conductive layer supports optimum temperature distribution and serves as a heat accumulator in case of a temporary power failure.Model variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Reliable, comfortable and energy-efficient - that's how vacuum drying works today. Separately adjustable and directly heated thermoshelves ensure precise temperature control and, thanks to the digital pressure control, the chamber load is not only dried at high speed but also extremely gently in our powerful and robust vacuum drying oven.Safety glass door with armoured glass on the inside and splinter shield on the outsideDigital pressure controlDirectly heated and individually controllable thermoshelvesWith 2 thermoshelf connectionsOptional: Pump base cabinet and energy-efficient vacuum pumpModel variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.comScope of supply: Vacuum drying oven, 1 aluminium thermoshelf, calibration certificate (for 160 °C at 20 mbar), software AtmoCONTROL
The laboratory water bath with the highest degree of comfort is available in six model sizes. The operating concept impresses with its intuitive and convenient menu navigation. A particular highlight: Thanks to the personalisable remote viewing through the CustomView, you always have an eye on the important information.The modular concept of this modern water bath guarantees maximum flexibility. If the application calls for it, a circulation pump, cooling unit, shaking device and test tube holder or insertable rack can easily be retrofitted.Standard equipment: Stainless steel gable cover, Drain system, Timer
The CO2 incubator ICOmed is the perfect solution: Thanks to the battery-buffered ControlCOCKPIT, the operating display, logging and CO2 control remain fully functional even when there is a power failure. All parameters are logged in accordance with the FDA and, when individually adjusted ranges for CO2, O2, temperature and humidity are exceeded, notifications can be sent to a mobile phone in addition to an alarm. With its rounded corners, the interior is easy to clean and can be sterilised for 60 minutes at 180 °C (including all sensors). The active humidity control offers optimal protection for cell and tissue cultures. It minimizes evaporation in the interior and ensures short recovery times. Every Memmert CO2 incubator ICOmed is a medical device of class IIa according to MDD 93/42/EEC until 26 May 2024 according to the transitional provisions by the (EU) 2017/745 article 120 (2).fully insulated stainless steel door and heated inner glass doorModel variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
The CO2 incubator is ideal for biosynthesis as well as the cultivation of cells, bacteria, and tissues in the laboratory. Thanks to turbulence-free chamber ventilation, a consistently homogeneous atmosphere is ensured.User-friendly, intuitive operating conceptControlCOCKPIT: TwinDISPLAY with 2 high-definition TFT colour displaysUSB and Ethernet interfaceSterilisation of the interior including all installations and sensors at 180 °C in 60 minutesMultifunctional all-round heating with additional door and rear wall heatingFail-safe FDA-compliant data loggingVisual and acoustic alarm as well as alarm notification when individually adjustable corridors are exceededRounded corners enable easy and thorough cleaning of the interior
Thanks to the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and simultaneously the most powerful cooled incubator of its kind.Compared to similar appliances, its heat-up, cool down and recovery times are much shorter.The Peltier-cooled incubator saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient.9 model sizes (32 to 2140 litres volume)2 model variants: SingleDISPLAY and TwinDISPLAYDouble doors as standard with fully insulated stainless steel, inside glass: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves)Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distributionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Thanks to the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and simultaneously the most powerful cooled incubator of its kind.Compared to similar appliances, its heat-up, cool down and recovery times are much shorter.The Peltier-cooled incubator saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient.9 model sizes (32 to 2140 litres volume)2 model variants: SingleDISPLAY and TwinDISPLAYDouble doors as standard with fully insulated stainless steel, inside glass: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves)Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distributionTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Our product suggestions
Incubators for research, medicine, pharmacy, and food technology. Ideal for all applications with temperatures up to 80 °C, especially for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are excluded, and the load is warmed up particularly carefully.User-friendly, intuitive operating menuPrecise and homogeneous temperature control thanks to product-specific heating conceptPre-heated fresh air prevents temperature fluctuationsWith inner glass doorNatural convectionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Incubators for research, medicine, pharmacy, and food technology. Ideal for all applications with temperatures up to 80 °C, especially for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are excluded, and the load is warmed up particularly carefully.User-friendly, intuitive operating menuPrecise and homogeneous temperature control thanks to product-specific heating conceptPre-heated fresh air prevents temperature fluctuationsWith inner glass doorForced air circulationFan speed adjustableSterilization programme (4 h/160 °C) for sterilization of working chamberTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.Extremely quiet, vibration-free and space saving as no compressor is requiredNo condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchangedLED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)SingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.Extremely quiet, vibration-free and space saving as no compressor is requiredNo condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchangedLED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
The cooled incubators with the unique ControlCOCKPIT for a quick and intuitive operation. Ideal at temperatures around zero and below. For rapid and precise alternation between heating up and cooling down times in ramp operation. Extraordinarily quiet.Standard equipment :PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel, material 1.4301 (ASTM 304) very stable and easy to cleanStructured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel (all sizes mounted on lockable castors)High-temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber.Adjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPITTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Safer than disinfection, hot-air sterilisation of containers and instruments.The safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times.Textured stainless steel housing, rear of zinc-plated steel, intuitively operated TwinDISPLAY(TFT colour display) with touchscreenYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.comAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB and mechanical temperature limiter TB acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarm
The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Forced air circulationSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
FAQs
Yes. We are an authorized Memmert distributor, which means all products are 100% genuine, covered under Memmert's official warranty, and supplied with full compliance documentation including calibration certificates.
Yes. Memmert equipment carries CE marking and complies with IEC/EN safety standards. Products are suitable for GLP and GMP environments and are accompanied by factory calibration certificates. IQ/OQ documentation is available for regulated pharma and QA labs requiring equipment qualification.
Memmert UN and UF series ovens are engineered for exceptional temperature uniformity — typically ±0.2°C at setpoint — making them a preferred choice for material testing, pharmaceutical drying, and aging studies where batch-to-batch consistency is critical. Each oven includes AtmoCONTROL software compatibility for full process documentation.
The Memmert UN and UF series drying ovens differ primarily in the type of air movement within the chamber. The UN series operates with natural air circulation and is suitable for applications where minimal airflow is preferred. The UF series uses forced air circulation to achieve faster heat transfer and more uniform temperature distribution throughout the chamber. The choice between the two depends on the specific application, sample characteristics, and process requirements. Contact us for assistance in selecting the most suitable model.
Memmert equipment comes with the manufacturer's standard warranty. We assist with warranty registration, service escalation, and spare parts. Calibration and preventive maintenance support is available through Memmert's authorized service network. Accessories and consumables can be reordered directly through our platform.
We supply a wide range of Memmert laboratory equipment including drying ovens, incubators, cooled incubators, CO₂ incubators, vacuum ovens, water baths, constant climate chambers, humidity chambers, environmental simulation chambers, material testing chambers, and ultra-low temperature freezers. If you need a specific model or configuration not listed, contact us and we will source it directly from Memmert.