With short stem. With a cone angle of 60° offers an optimum fit for all filter sizes. Ideal for easy filling of laboratory bottles and filtration of liquids. High temperature and chemical resistance.* according to DIN ISO 4798
Universally applicable filtration unit made of high-quality borosilicate glass. Wide range of applications for filtration with filter paper or membrane filters (47 mm).Large funnel (300 ml) with scaleFilter flask 1 or 2 litres, with scaleSafe plastic oliveFilter plate with porosity 2Filter plates with porosity 1 or 3 optionally availableAll components available as spare partsScope of supply: Filter flask NS 45/40, funnel 300 ml, filter holder NS 45/40 with connector GL 14 and filter plate 47 mm (por. 2), clamp
DIN EN ISO 835, DIN 12699Conformity-certifiedWith batch date identificationCalibrated to deliver (EX)Ring marks and graduations in permanent blue enamel
Conformity certified with batch ID.DIN EN ISO 1042With standard ground joint and PE stopperBlue ring mark and inscription
Trapezoidal shape. Conformity certified with batch ID.DIN EN ISO 1042With standard ground joint and PE stopperBlue ring mark and inscription
Side necks are parallel to the centre neck. With white inscription. Acc. to DIN 12392.
Side necks at 20° angle to the middle neck. With white inscription. Acc. to DIN 12394.
Side neck at 20° angle to the middle neck. With white inscription. Acc. to DIN 12394.
DIN EN ISO 648, DIN 12687Conformity-certifiedWith batch date identificationCalibrated to deliver (EX)Ring mark and inscriptions in permanent blue enamel
Filter flask with side-arm made of glass. With heavy wall for vacuum apllications.Erlenmeyer shapeWhite graduation and inscription
Tall form. Conformity certified with batch ID.DIN EN ISO 4788With hexagonal base and spoutBlue graduation
Desiccator made of soda-lime glass with lid, porcelain plate and stopcock. The stopcock has an outer diameter of about 9 mm.
Test tubes with round bottom.Hydrolytic resistance: Class HGB 3 acc. to ISO 719, Type III acc. to C - USP.
For condensing vapours. Water connection with PP olives. With standard ground cone and socket. Acc. to DIN 12591.
Ideal zum Mischen von Flüssigkeiten. Mit weißer Graduierung. Nach DIN EN ISO 24450.
Crystallising dishes without spout. DIN 12337. Autoclavable.
With standard ground joint and white inscription. Acc. to DIN EN ISO 4797.
Separating funnel acc. to Squibb with PTFE stopcock.DIN ISO 4800With standard ground joint and stopperWhite graduation
ISO 3819. With spout. From 25 ml with graduation. With easy-to-read scale and large labelling field for easy marking. In fired-on, highly durable white ceramic. Due to the uniform wall thickness, it is suitable for use as a heating vessel. Glass Type I / neutral as per USP, EP and JP. With retrace code (Batch Identification, for all) except 5 ml, 10 ml and 25 ml. Certificate available via the Internet. Autoclavable.
Supplied with PTFE stopcock. With PE conical stopper.ISO 4800NS necks according to DIN 12242 standard
Tall form.Detachable hexagonal baseWith spout and protection collarWhite graduation
With approximate graduations and spout. Reinforced, sturdy rim and increased mechanical strength for heavy duty. Glass Type I / neutral glass as per USP, EP and JP. With retrace code (Batch Identification). Certificate available via the Internet. Autoclavable.
Twist-off jar, with wide-neck. Suitable for storing or transporting liquids and coarse solids. The large opening facilitates cleaning and filling of the clear glass.Please order caps separately.
Recommendations
Complies with ISO 3819 and DIN 12331Manufactured from Pyrex® borosilicate glassTall form with spoutWhite graduations and marking spotPrinted with Trace Code for downloadable batch certificateBatch certificate available to download from www.scilabware.com
Mechanically stronger than standard beakersDesigned for longer life and increased user safetyReinforced rims and spout, less prone to breakage during washing etc.Thicker walls and heavier basesManufactured from Pyrex® borosilicate glassWhite graduations and marking spot
Transparent, in different colors. With stable handle and easily readable, printed graduations on both sides. Therefore, the volume is equally visible for left- and right handers. To preserve markings, do not clean at temperatures exceeding 60 ºC.StackableFood-safe product according to regulation (EU) No. 10/2011
ISO 3819. With approximate graduations and spout. With easy-to-read scale and large labelling field for easy marking, in fired-on, highly durable white ceramic. Due to the uniformly wall thickness, it is suitable for use as a heating vessel. Glass Type I / neutral glass as per USP, EP and JP. With retrace code (Batch Identification). Certificate available via the Internet. Autoclavable.
Crystal clear. With spout and easily readable, printed red scale. To preserve markings, cleaning at no higher than 60 °C is recommended. 10 ml, 150 ml, 400 ml, 600 ml Variants in addition to ISO 7056.
Actions New
PET-coated Adhesive PVC-tape with water-soluble adhesive. Available in different widths and colours.Easy to remove without stainsThickness: 0,14 mmCore: PE
Sturdy balance ideal for routine tasks in terms of fast stabilisation and accurate repeatable results as well as the large high contrast LCD display.With large draft shield with 3 sliding doors for easy accessLarge, backlit LCD display, digit height 22 mmEasy navigation through direct access to the diferent functionsComfortable formulation / documentation with separate tara print-buttonStable temperature behaviourSafe results through external calibrationOperation with power supplyWith RS232 interface
This beard mask has a detectable strip on the inside. That's why it can be detected by a dector machine at any time- even if the beard mask gets into the production.air-permeable and breathableideal for special hygienc-sensitive areas
The bottle-top dispenser makes liquid dosing easy and secure.Analog volume displayQuickly adjustable dosing volumeVolume selection with interior scalloped trackSimple calibration adjustment with a supplied toolValve system - tight sealing without additional sealing ringsFilling valve, olive-shapedAutoclavable at 121 °CScope of supply:Bottletop dispensers Dispensette® S, DE-M marked, performance certificate, telescope filling tube, mounting tool, adapters made of PPYellow color code. Ideal for dispensing organic solvents, e.g., chlorinated and fluorinated hydrocarbons such as trichlorotrifluoroethane and methylene chloride, or concentrated acids such as HCl and HNO3 (not HF) as well as trifluoroacetic acid (TFA), tetrahydrofuran (THF) and peroxides.
The combination of a springless PTFE valve and PTFE piston with chemically resistant ETP O-ring enables dispensing of both organic reagents as well as bases, thus, eliminating the need to buy different dispensers for different applications. The improved design of the uniTOPDISPENS 2 bottle top dispenser including a re-circulation valve allows a smooth, precise and reliable bubble free dispensing without any loss of reagent. The specially designed bottle adaptor which permits a 360° rotation of the unit, the easy volume setting as well as the flexible delivery nozzle underline the user friendliness of this bottletop dispenser. Available in six volume ranges.Springless PTFE valve, PTFE piston with chemically resistant ETP O-ring enables high chemical compatibility Glass cylinder from borosilicate glass 3.3Re-circulation valve enables easy priming and bubble free dispensingSmooth, reproducible and effortless dispensing360° rotation possible due to specially designed bottle adapterFlexible and adjustable delivery nozzle provides dispensing angle flexibility to the userSpecially designed volume adjustment knob for quick and easy volume settingThe telescopic extractable intake tube can be easily adjusted to varying bottle heightsNozzle cap reduces contact with air and prevents drying and dripping if the tip cover is attachedFive bottle adaptors included (28 mm, 32 mm, 37 mm, 40 mm and 45 mm). Standard thread: 30 mm.Fully autoclavable at 121 °C, 15 psi for 10 to 15 minIndividually calibrated in accordance with ISO 8655 standards and each unit is supplied with an individualcalibration certificateYou can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.3 years warranty