Manufacturer Navigation
Vacuubrand GmbH & Co.KG
Vacuum Technology at Its Finest: Vacuubrand Products at häberle LABORTECHNIKhäberle LABORTECHNIK GmbH & Co. KG proudly presents the high-precision vacuum technology by Vacuubrand GmbH & Co. KG, one of the leading manufacturers for laboratory and industrial applications. The product range i...
Show more
Our bestsellers
Compact Vacuum Controller VACUU·SELECT®, benchtop version
€2,465.00*
Depth:
127 mm
|
Dimensions (WxDxH):
191 x 127 x 187 mm
|
Height:
187 mm
|
Manufacturer Article Number:
20700070
|
Type:
VACUU·SELECT®
|
UNSPSC:
40151502
|
Width:
191 mm
Fully equipped two-point vacuum controller with capacitive, gas type-independent absolute pressure measurement using an alumina-ceramic diaphragm. Ready to use due to standard laboratory connections.Scope of supply: Vacuum controller VACUU·SELECT® with chemistry suction line valve, check valve, integrated ceramic vacuum sensor, venting valve and power supply.Fully equipped two-point vacuum controller with capacitive, gas type-independent absolute pressure measurement using an alumina-ceramic diaphragm. Ready to use due to standard laboratory connections.Scope of supply: Vacuum controller VACUU·SELECT® with chemistry suction line valve, check valve, integrated ceramic vacuum sensor, venting valve and power supply.
20%
Chemistry Pumping Units VARIO® select
€4,464.00*
€5,580.00*
(20% saved)
Depth:
303 mm
|
Dimensions (WxDxH):
306 x 303 x 400 mm
|
Flow rate:
33.3 l/min
|
Height:
400 mm
|
Manufacturer Article Number:
20700200
|
Plug type:
CEE
|
Type:
PC 3001 VARIO® select
|
UNSPSC:
40151502
|
Ultimate vacuum:
2 mbar
|
Ultimate vacuum with gas ballast:
4 mbar
|
Weight:
8.2 kg
|
Width:
306 mm
Die Kombination aus drehzahlgeregelter VARIO® Chemie-Membranpumpe und dem neuen Vakuum-Controller VACUU·SELECT macht die Chemie-Pumpstände VARIO® select zur optimalen Lösung für chemische Prozesse, die präzises Vakuum erfordern wie z.B. Rotationsverdampfung, Vakuumtrocknung oder Vakuum-Konzentration.Hohe Chemiebeständigkeit und damit beste Eignung für das Fördern von aggressiven Gasen und DämpfenKurze Prozesszeiten und reibungsloser Ablauf durch optimalen Einstellung des Prozessdrucks über den VACUU·SELECT ControllerDie VARIO®-Technologie regelt das Vakuum punktgenau und effizient über die MotordrehzahlEnergieverbrauch, Wartungsaufwand und Geräuschemission sind daher verschwindend geringDer saugseitige Abscheider aus Glas mit Schutzbeschichtung hält Partikel und Tröpfchen zurück, während der sehr kompakte, druckseitige Emissionskondensator die nahezu hundertprozentige Rückgewinnung von Lösemitteln ermöglichtLänderspezifische Steckervarianten auf Anfrage erhältlich.Die Kombination aus drehzahlgeregelter VARIO® Chemie-Membranpumpe und dem neuen Vakuum-Controller VACUU·SELECT macht die Chemie-Pumpstände VARIO® select zur optimalen Lösung für chemische Prozesse, die präzises Vakuum erfordern wie z.B. Rotationsverdampfung, Vakuumtrocknung oder Vakuum-Konzentration.Hohe Chemiebeständigkeit und damit beste Eignung für das Fördern von aggressiven Gasen und DämpfenKurze Prozesszeiten und reibungsloser Ablauf durch optimalen Einstellung des Prozessdrucks über den VACUU·SELECT ControllerDie VARIO®-Technologie regelt das Vakuum punktgenau und effizient über die MotordrehzahlEnergieverbrauch, Wartungsaufwand und Geräuschemission sind daher verschwindend geringDer saugseitige Abscheider aus Glas mit Schutzbeschichtung hält Partikel und Tröpfchen zurück, während der sehr kompakte, druckseitige Emissionskondensator die nahezu hundertprozentige Rückgewinnung von Lösemitteln ermöglichtLänderspezifische Steckervarianten auf Anfrage erhältlich.
Fine vacuum controller package VACUU·SELECT + VSP 3000, KF DN 16
€2,650.00*
Accuracy:
±15 % vom angezeigten Wert im Bereich 0, 01 ... 5 mbar
|
Manufacturer Article Number:
20700101
|
Max. measured value:
1000 mbar
|
Max. permitted ambient temperature:
40 °C
|
Measured range:
0.001 ... 1,000 mbar
|
Min. measured value:
0.001 mbar
|
Min. permitted ambient temperature:
10 °C
|
Type:
VACUU·SELECT + VACUU·VIEW extended, KF DN 16
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
The packages enable convenient vacuum control in the fine vacuum range from 5 mbar down to 10-3 mbar and consist of a VACUU·SELECT vacuum controller, a VSP 3000 vacuum sensor, VV-B 15C solenoid-operated valve and all necessary small flange components. Measurement principle: Thermal conductivity (Pirani), chemically resistant plastics/ceramics.The packages enable convenient vacuum control in the fine vacuum range from 5 mbar down to 10-3 mbar and consist of a VACUU·SELECT vacuum controller, a VSP 3000 vacuum sensor, VV-B 15C solenoid-operated valve and all necessary small flange components. Measurement principle: Thermal conductivity (Pirani), chemically resistant plastics/ceramics.
Chemistry Pump Units and Vacuum Systems
€5,070.00*
Depth:
418 mm
|
Dimensions (WxDxH):
243 x 418 x 457 mm
|
Flow rate:
2.0 m³/h
|
Height:
457 mm
|
Manufacturer Article Number:
20733150
|
Plug type:
CEE
|
Type:
PC 510 select
|
UNSPSC:
40151502
|
Ultimate vacuum:
7 mbar
|
Ultimate vacuum with gas ballast:
12 mbar
|
Width:
243 mm
Dieser Pumpstand bietet ein bewährtes Konzept der Vakuumerzeugung und -regelung für viele Verdampfungsprozesse. Der saugseitige Abscheider aus Glas mit Schutzbeschichtung hält Partikel und Tröpfchen zurück. Der druckseitige Emissionskondensator ermöglicht die nahezu hundertprozentige Rückgewinnung von Lösemitteln.Vakuum-Controller VACUU·SELECT mit grafischer BedienoberflächeVordefinierte Anwendungen ersparen Zeit und bringen reproduzierbare ErgebnisseAnwendungseditor ermöglicht eigene ProzessabläufeGute Chemikalien- und KondensatverträglichkeitÖlfreiDieser Pumpstand bietet ein bewährtes Konzept der Vakuumerzeugung und -regelung für viele Verdampfungsprozesse. Der saugseitige Abscheider aus Glas mit Schutzbeschichtung hält Partikel und Tröpfchen zurück. Der druckseitige Emissionskondensator ermöglicht die nahezu hundertprozentige Rückgewinnung von Lösemitteln.Vakuum-Controller VACUU·SELECT mit grafischer BedienoberflächeVordefinierte Anwendungen ersparen Zeit und bringen reproduzierbare ErgebnisseAnwendungseditor ermöglicht eigene ProzessabläufeGute Chemikalien- und KondensatverträglichkeitÖlfrei
Screw pumps VACUU·PURE® 10C
€9,190.00*
Connection pressure side:
KF DN 25
|
Connection suction side:
KF DN 25
|
Depth:
507 mm
|
Dimensions (WxDxH):
269 x 507 x 413 mm
|
Flow rate:
150
|
Height:
413 mm
|
IP code:
IP 20
|
Manufacturer Article Number:
20751000
|
Max. voltage:
230 V
|
Noise level:
55 db(A)
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
VACUU·PURE® 10C
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
0.005 mbar
|
Weight:
21.1 kg
|
Width:
269 mm
Powerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interfaceThe chemical-resistant version VACUU·PURE® 10C is protected against corrosion due to chemically resistant polymers on all wetted parts. A thick-walled PEEK encapsulation protects the spindles and stator inside the pumping chamber, providing high chemical resistance. An integrated sealing gas supply prevents the bearings from chemical attack. Due to the design-related high condensate compatibility, no gas ballast is required, even with high vapor loads.
Chemistry Pumping Units VARIO® select
€11,330.00*
Depth:
616 mm
|
Dimensions (WxDxH):
387 x 616 x 450 mm
|
Flow rate:
238.33 l/min
|
Height:
450 mm
|
Manufacturer Article Number:
25743850
|
Plug type:
CEE
|
Type:
PC 3012 NT VARIO® select
|
UNSPSC:
40151502
|
Ultimate vacuum:
1.5 mbar
|
Ultimate vacuum with gas ballast:
3 mbar
|
Weight:
29.7 kg
|
Width:
387 mm
Die Kombination aus drehzahlgeregelter VARIO® Chemie-Membranpumpe und dem neuen Vakuum-Controller VACUU·SELECT macht die Chemie-Pumpstände VARIO® select zur optimalen Lösung für chemische Prozesse, die präzises Vakuum erfordern wie z.B. Rotationsverdampfung, Vakuumtrocknung oder Vakuum-Konzentration.Hohe Chemiebeständigkeit und damit beste Eignung für das Fördern von aggressiven Gasen und DämpfenKurze Prozesszeiten und reibungsloser Ablauf durch optimalen Einstellung des Prozessdrucks über den VACUU·SELECT ControllerDie VARIO®-Technologie regelt das Vakuum punktgenau und effizient über die MotordrehzahlEnergieverbrauch, Wartungsaufwand und Geräuschemission sind daher verschwindend geringDer saugseitige Abscheider aus Glas mit Schutzbeschichtung hält Partikel und Tröpfchen zurück, während der sehr kompakte, druckseitige Emissionskondensator die nahezu hundertprozentige Rückgewinnung von Lösemitteln ermöglichtLänderspezifische Steckervarianten auf Anfrage erhältlich.Die Kombination aus drehzahlgeregelter VARIO® Chemie-Membranpumpe und dem neuen Vakuum-Controller VACUU·SELECT macht die Chemie-Pumpstände VARIO® select zur optimalen Lösung für chemische Prozesse, die präzises Vakuum erfordern wie z.B. Rotationsverdampfung, Vakuumtrocknung oder Vakuum-Konzentration.Hohe Chemiebeständigkeit und damit beste Eignung für das Fördern von aggressiven Gasen und DämpfenKurze Prozesszeiten und reibungsloser Ablauf durch optimalen Einstellung des Prozessdrucks über den VACUU·SELECT ControllerDie VARIO®-Technologie regelt das Vakuum punktgenau und effizient über die MotordrehzahlEnergieverbrauch, Wartungsaufwand und Geräuschemission sind daher verschwindend geringDer saugseitige Abscheider aus Glas mit Schutzbeschichtung hält Partikel und Tröpfchen zurück, während der sehr kompakte, druckseitige Emissionskondensator die nahezu hundertprozentige Rückgewinnung von Lösemitteln ermöglichtLänderspezifische Steckervarianten auf Anfrage erhältlich.
Rotary vane pumps RZ 6, two stage, package 1
€3,245.00*
Connection pressure side:
DN 8-10 mm
|
Connection suction side:
KF DN 16
|
Depth:
420 mm
|
Dimensions (WxDxH):
230 x 420 x 240 mm
|
Flow rate:
95 l/min
|
Height:
240 mm
|
IP code:
IP 40
|
Manufacturer Article Number:
20798009
|
Max. voltage:
230 V
|
No. of stages:
2
|
Noise level:
50 db(A)
|
Plug type:
CH
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
180 W
|
Type:
RZ 6+FO+VS 16
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105109
|
Ultimate vacuum:
0.002 mbar
|
Ultimate vacuum with gas ballast:
0.01 mbar
|
Weight:
17.8 kg
|
Width:
230 mm
The powerful rotary vane pumps are ideal for laboratory and process applications that require a very good ultimate vacuum at medium to increased gas flow rate. Typical applications are lyophilisation, fine vacuum distillation, and drying chambers.High flow rate even at vacuum levels approaching ultimate vacuumHigh water vapor tolerance due to efficient gas ballastVery good ultimate vacuum even with gas ballastVacuum-tight at switch-off without suction nozzle valveLong oil change intervals due to large usable oil volumeEasy maintenance due to telescopic designScope of supply: Rotary vane pump, oil mist filter FO, butterfly valve VS 16, manual
Rotary vane pump RZ 6, two-stage
€3,030.00*
Connection pressure side:
DN 8-10 mm
|
Connection suction side:
KF DN 16
|
Depth:
420 mm
|
Dimensions (WxDxH):
156 x 420 x 240 mm
|
Flow rate:
95 l/min
|
Height:
240 mm
|
IP code:
IP 40
|
Manufacturer Article Number:
20798130
|
Max. voltage:
230 V
|
No. of stages:
2
|
Noise level:
50 db(A)
|
Plug type:
CEE
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
180 W
|
Type:
RZ 6
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105109
|
Ultimate vacuum:
0.002 mbar
|
Ultimate vacuum with gas ballast:
0.01 mbar
|
Weight:
17 kg
|
Width:
156 mm
The powerful rotary vane pumps are ideal for laboratory and process applications that require a very good ultimate vacuum at medium to increased gas flow rate. Typical applications are lyophilisation, fine vacuum distillation, and drying chambers.High flow rate even at vacuum levels approaching ultimate vacuumHigh water vapor tolerance due to efficient gas ballastVery good ultimate vacuum even with gas ballastVacuum-tight at switch-off without suction nozzle valveLong oil change intervals due to large usable oil volumeEasy maintenance due to telescopic designScope of supply: Rotary vane pump, manual
Chemistry Diaphragm Vacuum Pumps with ATEX compliance
€5,500.00*
Connection pressure side:
KF DN 16
|
Connection suction side:
KF DN 16
|
Depth:
337 mm
|
Dimensions (WxDxH):
287 x 337 x 251 mm
|
Flow rate:
1.9 m³/h
|
Height:
251 mm
|
Manufacturer Article Number:
20696920
|
No. of stages:
2
|
Plug type:
stranded wire
|
Type:
MZ 2C EX
|
UNSPSC:
40-15-15-48
|
Ultimate vacuum:
12 mbar
|
Ultimate vacuum with gas ballast:
18 mbar
|
Width:
287 mm
ATEX chemistry diaphragm pumps offer all advantages of oil-free chemistry diaphragm pumps. Typical applications are rotary evaporators and drying ovens with potentially explosive atmospheres. The ATEX approval includes the interior of the pump (in contact with pumped gases) as well as the surrounding area of the pump.Outstanding chemical resistance and superior vapor toleranceMainly made of antistatic materialsFlame proof motor with integrated, self-locking overload and excess temperature protection for direct 230V / 50Hz single phase power supplyOverpressure safety relief valves internally and at outletWith separate gas ballast connection part for use of inert gasSafety diaphragm technology with option for inert gas purge and detection of diaphragm breakageATEX compliance:Pump chamber (pumped gases): II 2G IIC T3 XExterior space (pump environment): II 2G IIB T4 X (with inert gas purging) / II 3G IIB T4 X (without inert gas purging)Speed-controlled ATEX VARIO vacuum pumps on request.
Our product suggestions
Vacuum measuring instrument VACUU·VIEW extended
€1,030.00*
Accuracy:
±15 % of indicated value in the range from 0.01 ... 5 mbar, ±3 mbar for >5 mbar
|
Depth:
50 mm
|
Dimensions (WxDxH):
62 x 50 x 103 mm
|
Height:
103 mm
|
Manufacturer Article Number:
20683210
|
Max. measured value:
1100 mbar
|
Max. permitted ambient temperature:
40 °C
|
Max. voltage:
230 V
|
Measured range:
0.001 ... 1,100 mbar
|
Min. measured value:
0.001 mbar
|
Min. permitted ambient temperature:
10 °C
|
Min. voltage:
100 V
|
Power supply:
100 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
VACUU·VIEW extended
|
UNSPSC:
40151502
|
Weight:
190 g
|
Width:
62 mm
The combined rough and fine vacuum gauge VACUU·VIEW extended works in the enhanced range from atmosphere down to 10-3 mbar. The chemically resistant combination of ceramic diaphragm sensor and ceramic jacketed Pirani sensor ensures reliable and precise measurements. The illuminated display enables comfortable reading.Compact design with integrated sensors for useful setup in laboratory and processChemically resistant, heavy duty vacuum sensors, highly reliable at harsh laboratory conditions even in case of very aggressive chemicalsHigh repeatability and long-term accuracy under all typical conditions reliable and repeatable resultsDisplay with menu driven handling, easy to use e.g. for unit settingsCompatible to gauge DCP 3000 and controller CVC 3000 or VACUU·SELECTThe product is delivered ready for use
Diaphragm vacuum pumps -NT Series, Chemistry design
€2,185.00*
Depth:
243 mm
|
Dimensions (WxDxH):
243 x 243 x 198 mm
|
Flow rate:
2.0 m³/h
|
Height:
198 mm
|
Manufacturer Article Number:
20732302
|
No. of stages:
2
|
Plug type:
UK
|
Type:
MZ 2C NT
|
UNSPSC:
40151502
|
Ultimate vacuum:
7 mbar
|
Ultimate vacuum with gas ballast:
12 mbar
|
Width:
243 mm
Hohes Saugvermögen und Endvakuum. Für weites Einsatzgebiet im Labor und industriellen Betrieb bei korrosiven GasenKompromisslose Chemie-Ausführung durch Einsatz optimal chemikalienbeständiger FluorkunststoffeLange Membranlebensdauer durch PTFE-Sandwichdesign und optimale Radialfixierung der MembranWartungsfreundlich. Getrennter Membran- und Ventilwechsel durch neuartige Ventilinseln (patentiert). Einfache Demontage, Reinigung und zuverlässige Wiedermontage ohne NacheinstellungBesonders leise und laufruhig durch kompakten Antrieb mit patentiertem "fliegendem Motor". Ideal für den Einbau in empfindliche Geräte für Labor und IndustrieLeicht zu reinigen durch glatte OberflächenHohe Dampfverträglichkeit durch integrierte Chemieverschaltung und Gasballasteinrichtung
20%
Diaphragm pumps chemistry design, ME 1C
€804.00*
€1,005.00*
(20% saved)
Connection pressure side:
DN 8-10 mm
|
Connection suction side:
DN 8-10 mm
|
Depth:
270 mm
|
Dimensions (WxDxH):
121 x 270 x 154 mm
|
Flow rate:
0.7 m³/h
|
Height:
154 mm
|
IP code:
IP 40
|
Manufacturer Article Number:
20721100
|
Max. voltage:
230 V
|
Min. voltage:
220 V
|
No. of stages:
1
|
Plug type:
CEE
|
Power supply:
220 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ME 1C
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
100 mbar
|
Weight:
5.0 kg
|
Width:
121 mm
The diaphragm pumps ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are the perfect partner for both single and multiple filtrations.One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.In the chemistry diaphragm pumps ("C") all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE).An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum.Gas ballast for reliable pump performance.Two up to four stage chemistry diaphragm pumps (letters in the product name Z, D or V) are equipped with a manual gas ballast valve as standard. The supply of gas ballast minimizes the risk of condensation inside the pump.The diaphragm pumps ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are the perfect partner for both single and multiple filtrations.One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.In the chemistry diaphragm pumps ("C") all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE).An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum.Gas ballast for reliable pump performance.Two up to four stage chemistry diaphragm pumps (letters in the product name Z, D or V) are equipped with a manual gas ballast valve as standard. The supply of gas ballast minimizes the risk of condensation inside the pump.Diaphragm pumps ATEX-models available on request. Country-specific power cord versions available on request.
Oil for rotary vane pumps
€515.00*
Capacity:
20 l
|
Manufacturer Article Number:
20687012
|
Type:
B
|
UNSPSC:
41-10-51-09
Standard pump oil. High viscosity, low vapour pressure, good chemical resistance.Hazardous Substance DataSDSLink
Variants from €40.15*
Fluid aspiration systems BioChem-VacuuCenter BVC control G, glass bottle
€1,995.00*
Depth:
408 mm
|
Dimensions (WxDxH):
194 x 408 x 430 mm
|
Height:
430 mm
|
Manufacturer Article Number:
20727302
|
Material trap flask:
Borosilicate
|
Max. voltage:
230 V
|
Nominal volume trap flask:
2000 ml
|
Plug type:
UK
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
BVC control G
|
Type of auxiliary energy:
Mains connection
|
Weight:
7.7 kg
|
Width:
194 mm
|
With level sensor:
No
The BioChem-VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants with a powerful and long-lasting chemistry diaphragm pump, which is automatically turned on and off as needed.Extremely compact, space saving and low noise and thus the ideal tool in the workplaceEasy operation due to electronically adjustable suction power via touch panel, for strong or sensitive suction and reproducible operationAutoclavable collection bottle designed to reduce aerosol- and foam formationAspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube, mechanics is not in contact with mediaHighly reduced contamination risks for the vacuum pumping system due to hydrophobic 0.2 µm sterilisable filterReady to accept a second aspiration hand controller (optional)The BioChem-VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants with a powerful and long-lasting chemistry diaphragm pump, which is automatically turned on and off as needed.Extremely compact, space saving and low noise and thus the ideal tool in the workplaceEasy operation due to electronically adjustable suction power via touch panel, for strong or sensitive suction and reproducible operationAutoclavable collection bottle designed to reduce aerosol- and foam formationAspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube, mechanics is not in contact with mediaHighly reduced contamination risks for the vacuum pumping system due to hydrophobic 0.2 µm sterilisable filterReady to accept a second aspiration hand controller (optional)
Vacuum fittings, clamping rings for type KF small flange
€22.44*
Connection size:
DN 10/16
|
Manufacturer Article Number:
20660000
|
Material:
Aluminium
|
UNSPSC:
40151502
Vacuum fittings, centring rings
€19.56*
Connection size:
DN 10
|
Manufacturer Article Number:
20660120
|
UNSPSC:
40151502
Stainless steel/FPM (e.g. Viton®). For Type KF small flange.
Vacuum fittings, nozzles, aluminium
€32.56*
Connection size:
DN 10
|
For tubing Ø:
12 mm
|
Manufacturer Article Number:
20662530
|
UNSPSC:
41-12-18-15
Flanged tubing nozzles. For Type KF small flange.
Variants from €24.97*
Vacuum fittings, flexible metal tubing
€104.00*
Connection size:
KF DN 10
|
Length:
250 mm
|
Manufacturer Article Number:
20673305
|
Material:
Stainless steel
|
UNSPSC:
41105108
Flanged at both ends. For Type KF small flange.