Filter
Filter
LLG Labware
4-Position-Magnetic Stirrer LLG-uniSTIRRER 1/M4
Colour housing:
Orange
|
Depth:
457 mm
|
Depth working area:
385 mm
|
Dimensions (WxDxH):
126 x 457 x 13.5 mm
|
Display:
Digital
|
Height:
13.5 mm
|
IP code:
IP 65
|
Material housing:
Stainless steel
|
Material stirring surface:
Stainless steel
|
Max. permitted ambient temperature:
40 °C
|
Max. speed:
1200 1/min
|
Min. permitted ambient temperature:
5 °C
|
Min. speed:
15 1/min
|
No. of stirring positions:
4
|
Permitted ambient temperature:
5 ... 40 °C
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Rated capacity:
13 W
|
Speed:
15 ... 1200 1/min
|
Stirring capacity per position:
400 ml
|
Stirring centre distances:
95 mm
|
Type:
LLG-uni STIRRER 1/M4
|
Type of auxiliary energy:
Mains connection
|
Warranty:
3 years
|
Weight:
1900 g
|
Width:
126 mm
|
Width working area:
122 mm
|
With timer:
Yes
|
Working area (WxD):
122 x 385 mm
An Ultra-flat inductive magnetic stirrer without heating with timer. The modern magnet coil technology consists only of non-moving parts and therefore guarantees a wear-free drive.For a better mixing of samples it is possible to change the direction of rotation every 30 seconds.Max. stirring quantity per stirring position 400 mlTimer (1 to 99 min, infinitely)100 % wear- and maintenance-free inductive driveLED-display for an exact adjustment of the rotation speedDigital regulated rotation speedAlteration of the stirring directionHigh Protection class IP 65Stainless steel surfaceScope of supply: magnetic stirrer, 1 mains adapter each US, AUS, UK, 4 stirring rod 25 x 8 mm
€405.00*
2mag AG
Accessories for 2mag magnetic stirring systems
Type:
Setting frame fabFRAME for FABdrive
€14.90*
IKA-Werke GmbH & Co.KG
Accessories for ETS-D5 / ETS-D6 contact thermometer
Description:
Bosshead
|
Type:
H 44
€36.00*
Bürkle GmbH
Accessories for fish-clip®
Description:
Compression-type bung in silicone for NS 19/26
From
€4.80*
LLG Labware
Accessories for LLG-uniSTIRRER 3 / LLG-uniSTIRRER 5 / LLG-uniSTIRRER 7
Description:
Adjustment knob
|
For:
LLG-uniSTIRRER 3
€17.40*
LLG Labware
Accessories for Magnetic stirrer LLG-uniSTIRRER 2
Type:
Replacement power adapter
€13.20*
Cole-Parmer Ltd. (ET Stua)
Accessories for magnetic stirrer, ST-200-P
Description:
Mains adapter, SM27/1 for UK / Ireland,230 V 50Hz single phase supplies
€79.20*
Heidolph Instruments
Accessories for Magnetic Stirrers - Heat-On Attachments
Description:
25ml
|
Type:
Heat-On insert
These attachments are by far the safest, fastest and most efficient method for heating and mixing solutions in round-bottom flasks from 10 ml to 5L. Heat-On fits precisely to every flask, thus insuring maximum surface contact and fast heat transfer. This eliminates the need for oil as a heat conductor.This unique design prevents glass breakage and protects from spilled chemicals or solventsThe high temperature range provides unlimited safety for applications up to 260°CA unique PTFE coating on the aluminum Heat-On body allows for superior chemical resistance and many years of service life150 ml of water boils in less than 11 minutes
€63.00*
Heidolph Instruments
Accessories for Magnetic Stirrers - Heat-On package
Description:
1 Multi-Well Holder, 3 inserts
|
Type:
Heat-On Multi-Well Basic
Multi-Well Holder and Inserts.This unique Multi-Well Holder is designed to hold either one or two inserts for flasks. The inserts are available for 10ml, 25ml, 25ml, 100ml and 150ml flasks. Flask inserts also feature cut-away sides for use with two or three neck flasks and accepts the optional safety lifting handles.
€713.00*
Phoenix Instrument GmbH
Accessories for Magnetic Stirrers
Description:
Reaction block for round flask 50ml
|
Type:
RSM-E 170
For Hotplates with 135mm diameter.The reaction block allows syntheses to be carried out in round flasks without using an oil or sand bath. The reaction block ensures safety at work and preventing oil baths and heating mantles from over heating in your lab. The messy oil clear-ups that result from changing oil or removing flasks from an oil bath will be minimised. This system ensures optimal heat transfer from the heating plate directly into the medium. Uniform mixing is also guaranteed because there is no interference to the magnetic field from the aluminium blocks. Reaction blocks are available in four standard sizes.Syntheses in round flasks without oil bathUniform mixingHigh-precision thermal conduction directly into the reaction blockSafe and clean working
€119.00*
Heidolph Instruments
Accessories for Magnetic stirrers Hei-PLATE Mix'n'Heat series
Description:
Support rod and Clamp kit
€193.00*
2mag AG
Accessories for mixer MIXdrive
Description:
mixBATHcover 15, PP, for mixBath in combination with MIXdrive 15
Special design on request.
€246.00*
Heidolph Instruments
Accessories for MR Hei-PLATE series magnetic stirrers / hotplates
Type:
Holder for temperature sensor Pt 1000
* Only suitable for magnetic stirrers with aluminium alloy hotplate.
€17.00*
Cole-Parmer Ltd. (Stuart)
Accessories for Stuart Magnetic stirrers and Hotplates
Description:
Digital temperature controller
|
Type:
TC-200D
€38.90*
Velp Scientifica SRL
Accessories for Velp magnetic stirrers and hotplates
Description:
Clamp with pobe support
|
For:
AREC Connect / AREC.X / AM4 Digital Pro / AREX 5 Digital / AREX 6 Connect Pro / AREX 6 Digital Pro
€16.50*
IKA-Werke GmbH & Co.KG
Adapters for Power supplies for Magnetic stirrers TWISTER
Description:
Adapter for power supply (≤ 4 devices)
|
Type:
TW.PWR.PLUG.1
€11.80*
IKA-Werke GmbH & Co.KG
Bath tanks for multi-position magnetic stirrers RO 15
Description:
Stainless steel bath vessel
|
Type:
IB R RO 15 pro
€1,025.00*
schuett-biotec GmbH
Beaker insert stirrers, Magneto-stabil
For neck diam. mm:
60 to 95
|
Type:
1
For all beakers from 100 to 2000ml capacity. Comprises conical lid made of chemical-resistant plastic with stirrer bearing, two pipette openings and captive PTFE magnetic stirring bar with support shaft. Guarantees gentle running, with no de-coupling of the stirrer bar.
€39.00*
2mag AG
Control unit atexMIXcontrol
Depth:
460 mm
|
Dimensions (WxDxH):
360 x 460 x 200 mm
|
Display:
Digital
|
Height:
200 mm
|
IP code:
IP 65
|
Material housing:
Die-cast aluminium
|
Max. permitted ambient temperature:
40 °C
|
Max. relative humidity rate:
80 %
|
Max. speed:
2000 1/min
|
Min. permitted ambient temperature:
0 °C
|
Min. speed:
100 1/min
|
Permitted ambient temperature:
0 ... 40 °C
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50 ...60 Hz
|
Rated capacity:
20 W
|
Speed:
100 ... 2000 1/min
|
Type:
atexMIXcontrol
|
Type of auxiliary energy:
Mains connection
|
Weight:
15 kg
|
Width:
360 mm
|
With timer:
No
Explosion-protected control unit with digital display for speed and power setting is suitable for operation in explosion protection zone 1.Jerk-free stirring even at low speeds4-step power settingSoftStartQuickSet for quick setting of the start or maximum speedMemory function to save the last settingsCertified according to ATEX II 2G Ex db eb IIC T6 GbThe control unit and agitator drive are firmly connected to each other to ensure Ex protection.
€5,174.00*
2mag AG
Control unit bioMIXcontrol 4MS for stirring drives bioMIXdrive 1
Depth:
155 mm
|
Dimensions (WxDxH):
200 x 155 x 38 mm
|
Display:
Digital
|
Height:
38 mm
|
IP code:
IP 20
|
Material housing:
Stainless steel
|
Max. permitted ambient temperature:
40 °C
|
Max. relative humidity rate:
80 %
|
Max. speed:
250 1/min
|
Min. permitted ambient temperature:
0 °C
|
Min. speed:
5 1/min
|
Permitted ambient temperature:
0 ... 40 °C
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Rated capacity:
6 W
|
Speed:
5 ... 250 1/min
|
Type:
bioMIXcontrol 4MS
|
Type of auxiliary energy:
Mains connection
|
Weight:
1500 g
|
Width:
200 mm
|
With timer:
No
The powerful control units are characterized by:Fully encapsulated and sealed stainless steel housing, water, dust and germ-proofSoftStart for reliable catching / centering and safe acceleration of the stirring rod with different volumes and viscositiesJerk-free stirring even at low speedsQuickSet for quick setting of start- and maximum speedQuickStop-function against after-run and glass breakage, storage of last working status when turning offDigital display for speed settingExtremely robust construction and performanceEasy to clean and maximum resistance3 years warrantyMade in GermanyIdentical to bioMIXcontrol, but for 4 x bioMIXdrive 1, individual and independent speed setting for each stirring drive, synchronous speed mode for all drives with one touch.
€2,675.00*
2mag AG
Control unit FABcontrol for Magnetic stirrer FABdrive
Depth:
175 mm
|
Dimensions (WxDxH):
200 x 175 x 51 mm
|
Display:
Digital
|
Height:
51 mm
|
IP code:
IP 20
|
Material housing:
Stainless steel
|
Max. permitted ambient temperature:
40 °C
|
Max. relative humidity rate:
80 %
|
Max. speed:
990 1/min
|
Min. permitted ambient temperature:
0 °C
|
Min. speed:
80 1/min
|
Permitted ambient temperature:
0 ... 40 °C
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Rated capacity:
100 W
|
Speed:
80 ... 990 1/min
|
Stirring centre distances:
200 mm
|
Type:
FABcontrol
|
Type of auxiliary energy:
Mains connection
|
Weight:
1600 g
|
Width:
200 mm
|
With timer:
No
The powerful control units are characterized by:Fully encapsulated and sealed stainless steel housing, water, dust and germ-proofSoftStart for reliable catching / centering and safe acceleration of the stirring rod with different volumes and viscositiesJerk-free stirring even at low speedsQuickSet for quick setting of start- and maximum speedQuickStop-function against after-run and glass breakage, storage of last working status when turning offDigital display for speed settingExtremely robust construction and performanceEasy to clean and maximum resistance3 years warrantyMade in GermanySoftStart-setting (variable, 20-99 seconds) and live speedBeep-function at falling below set speed
€1,951.00*
2mag AG
Control unit MAXcontrol for Magnetic stirrer MAXdrive
Depth:
175 mm
|
Dimensions (WxDxH):
200 x 175 x 51 mm
|
Display:
Digital
|
Height:
51 mm
|
IP code:
IP 20
|
Material housing:
Stainless steel
|
Max. permitted ambient temperature:
40 °C
|
Max. relative humidity rate:
80 %
|
Max. speed:
1200 1/min
|
Min. permitted ambient temperature:
0 °C
|
Min. speed:
100 1/min
|
Permitted ambient temperature:
0 ... 40 °C
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Rated capacity:
60 W
|
Speed:
100 ... 1200 1/min
|
Type:
MAXcontrol
|
Type of auxiliary energy:
Mains connection
|
Weight:
1600 g
|
Width:
200 mm
|
With timer:
No
The powerful control units are characterized by:Fully encapsulated and sealed stainless steel housing, water, dust and germ-proofSoftStart for reliable catching / centering and safe acceleration of the stirring rod with different volumes and viscositiesJerk-free stirring even at low speedsQuickSet for quick setting of start- and maximum speedQuickStop-function against after-run and glass breakage, storage of last working status when turning offDigital display for speed settingExtremely robust construction and performanceEasy to clean and maximum resistance3 years warrantyMade in Germany
€1,675.00*
2mag AG
Control unit MIXcontrol 20
Depth:
155 mm
|
Dimensions (WxDxH):
200 x 155 x 38 mm
|
Display:
Digital
|
Height:
38 mm
|
IP code:
IP 20
|
Material housing:
Stainless steel
|
Max. permitted ambient temperature:
40 °C
|
Max. relative humidity rate:
80 %
|
Max. speed:
1600 1/min
|
Min. permitted ambient temperature:
0 °C
|
Min. speed:
100 1/min
|
Permitted ambient temperature:
0 ... 40 °C
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50 ... 60 Hz
|
Rated capacity:
20 W
|
Speed:
100 ... 1600 1/min
|
Type:
MIXcontrol 20
|
Type of auxiliary energy:
Mains connection
|
Weight:
1300 g
|
Width:
200 mm
|
With timer:
No
Universal control unit for the connection of one stirring drive.Jerk-free stirring even at low speeds4-step power settingSoftStartDigital display for speed and power settingQuickSet for quick setting of the start or maximum speedMemory function to save the last settingsEasy-to-clean
€720.00*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.10*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.10*
Magnetic stirrer
A special form of stirrer is the magnetic stirrer. The magnetic drives work according to the inductive principle. Stationary coils generate an electromagnetic rotating field with the aid of alternating currents. Magnetic stirring bars are set in motion by the rotating field due to the magnetic field at the bottom of the vessel and thus generate mixing in liquids. Depending on the adjustable speed and power, varying degrees of turbulence can be produced. In combination with a heating plate with temperatures of up to 300°C, magnetic stirrers serve as a perfect tool in numerous fields of application. With the help of external temperature sensors, the media temperatures can be controlled very precisely.
Your watch lists
Loading...