Colour:
Black
|
Manufacturer Article Number:
102439
|
Material:
Artificial Leather
|
Max. sitting height:
630 mm
|
Min. sitting height:
510 mm
|
Sitting height:
510 ... 630 mm
|
Suitable for cleanroom:
Yes
|
Type:
WS 1720 RR ESD
|
Version (Foot):
Castors
|
Warranty:
5 years
|
With armrests:
No
|
With foot ring:
No
Backrest upholstered with leatherette, colour: black, (W top/bottom x H: 340/445 x 515 mm), backrest tilt: -10° to +8°Seat upholstered with leatherette, colour: black, (W back/front x D: 480/510 x 470 mm), seat tilt: -4° to +10°Column, chrome-plated, with column coverFive star base, polished with conductive dual castorsConductive chair for discharging static electricity electrical resistance: 6 x 10^6 OhmCertified for class-5 clean rooms acc. to DIN EN ISO 14644-1Load capacity 120 kg5 years warranty
Variants from €742.14*
Colour:
Transparent
|
Height:
100 mm
|
Manufacturer Article Number:
7-2101-31
|
Material:
PP
|
Neck int. Ø:
16 mm
|
Nominal capacity:
100 ml
|
Sterile:
Yes
|
Type of closure:
Screw cap
|
UNSPSC:
41121804
|
Ø:
47 mm
Sterilisized with gamma raysClean package, cleaned with ultrapure water (case) with 1 carton with 2 x 5 pieces
Colour:
Blue
|
Manufacturer Article Number:
9125-MG01-3277-5
|
Material:
Artificial Leather
|
Max. sitting height:
810 mm
|
Min. sitting height:
560 mm
|
Sitting height:
560 ... 810 mm
|
Type:
Labsit 4
|
Version (Foot):
Sit stop castors
|
Warranty:
10 years
|
With armrests:
No
|
With foot ring:
Yes
Labsit is the chair for all kinds of laboratories. Its intelligent Flex function offers comfort and laboratory ergonomics with minimal adjustments required. Labsit has all the properties required for laboratory work and, at the same time, it is light and universally applicable. Labsit is therefore a laboratory specialist and all-rounder all in one.Minimal joints: Hygienic design for easy cleaning and disinfection.Resistant to disinfectants and chemicals: Resistant to all of the usual disinfectants and chemicals.Seat upholstery made of artificial leather (soft and comfortable, washable and antibacterial) or soft-touch PU foam (extremly robust, washable and antibacterial) in black.Suitable for cleanrooms: Certified for the use in cleanrooms category 3 in accordance with ISO 14644-1.Adheres to biosafety level BSL1, BSL2 and BSL3 of the Directive for Biological Agents, GMP-conform.The backrest made of plastic with its 3D-Flex function automatically adapts to the movements of the user and therefore follows the upper body when leaning back or turning sidewards.The Flex function on the front edge of the seat supports the forward-angled working which is typical for laboratory work.Its low weight and integrated handle provide maximum mobility and easy handling in the laboratory.Seat height adjustment by gas spring.Solid polished aluminium star base, flat design.The chrome-plated foot ring for the high chairs provides support through the wide tread area and can be easily and quickly adjusted in height.With certificate "Tested Safety" (GS mark).10 years warranty, Made in Germany.Accessories: Armrests (pair). Lab-Clip: The intelligent Lab-Clip enables Labsit to be easily, individually and quickly labelled, this creates order. Can be added or removed any time.Labsit is the chair for all kinds of laboratories. Its intelligent Flex function offers comfort and laboratory ergonomics with minimal adjustments required. Labsit has all the properties required for laboratory work and, at the same time, it is light and universally applicable. Labsit is therefore a laboratory specialist and all-rounder all in one.Minimal joints: Hygienic design for easy cleaning and disinfection.Resistant to disinfectants and chemicals: Resistant to all of the usual disinfectants and chemicals.Seat upholstery made of artificial leather (soft and comfortable, washable and antibacterial) or soft-touch PU foam (extremly robust, washable and antibacterial) in black.Suitable for cleanrooms: Certified for the use in cleanrooms category 3 in accordance with ISO 14644-1.Adheres to biosafety level BSL1, BSL2 and BSL3 of the Directive for Biological Agents, GMP-conform.The backrest made of plastic with its 3D-Flex function automatically adapts to the movements of the user and therefore follows the upper body when leaning back or turning sidewards.The Flex function on the front edge of the seat supports the forward-angled working which is typical for laboratory work.Its low weight and integrated handle provide maximum mobility and easy handling in the laboratory.Seat height adjustment by gas spring.Solid polished aluminium star base, flat design.The chrome-plated foot ring for the high chairs provides support through the wide tread area and can be easily and quickly adjusted in height.With certificate "Tested Safety" (GS mark).10 years warranty, Made in Germany.Accessories: Armrests (pair). Lab-Clip: The intelligent Lab-Clip enables Labsit to be easily, individually and quickly labelled, this creates order. Can be added or removed any time.
Colour:
Transparent
|
Height:
98 mm
|
Manufacturer Article Number:
7-2102-31
|
Material:
PP
|
Neck int. Ø:
25 mm
|
Nominal capacity:
100 ml
|
Sterile:
Yes
|
Type of closure:
Screw cap
|
UNSPSC:
41121804
|
Ø:
47 mm
Sterilisized with gamma raysClean package, cleaned with ultrapure water (case) with 1 carton with 2 x 5 pieces
Colour:
Blue
|
Manufacturer Article Number:
9121-MG01-3277-5
|
Material:
Artificial Leather
|
Max. sitting height:
770 mm
|
Min. sitting height:
520 mm
|
Sitting height:
520 ... 770 mm
|
Type:
Labsit 3
|
Version (Foot):
Glides
|
Warranty:
10 years
|
With armrests:
No
|
With foot ring:
Yes
Labsit is the chair for all kinds of laboratories. Its intelligent Flex function offers comfort and laboratory ergonomics with minimal adjustments required. Labsit has all the properties required for laboratory work and, at the same time, it is light and universally applicable. Labsit is therefore a laboratory specialist and all-rounder all in one.Minimal joints: Hygienic design for easy cleaning and disinfection.Resistant to disinfectants and chemicals: Resistant to all of the usual disinfectants and chemicals.Seat upholstery made of artificial leather (soft and comfortable, washable and antibacterial) or soft-touch PU foam (extremly robust, washable and antibacterial) in black.Suitable for cleanrooms: Certified for the use in cleanrooms category 3 in accordance with ISO 14644-1.Adheres to biosafety level BSL1, BSL2 and BSL3 of the Directive for Biological Agents, GMP-conform.The backrest made of plastic with its 3D-Flex function automatically adapts to the movements of the user and therefore follows the upper body when leaning back or turning sidewards.The Flex function on the front edge of the seat supports the forward-angled working which is typical for laboratory work.Its low weight and integrated handle provide maximum mobility and easy handling in the laboratory.Seat height adjustment by gas spring.Solid polished aluminium star base, flat design.The chrome-plated foot ring for the high chairs provides support through the wide tread area and can be easily and quickly adjusted in height.With certificate "Tested Safety" (GS mark).10 years warranty, Made in Germany.Accessories: Armrests (pair). Lab-Clip: The intelligent Lab-Clip enables Labsit to be easily, individually and quickly labelled, this creates order. Can be added or removed any time.Labsit is the chair for all kinds of laboratories. Its intelligent Flex function offers comfort and laboratory ergonomics with minimal adjustments required. Labsit has all the properties required for laboratory work and, at the same time, it is light and universally applicable. Labsit is therefore a laboratory specialist and all-rounder all in one.Minimal joints: Hygienic design for easy cleaning and disinfection.Resistant to disinfectants and chemicals: Resistant to all of the usual disinfectants and chemicals.Seat upholstery made of artificial leather (soft and comfortable, washable and antibacterial) or soft-touch PU foam (extremly robust, washable and antibacterial) in black.Suitable for cleanrooms: Certified for the use in cleanrooms category 3 in accordance with ISO 14644-1.Adheres to biosafety level BSL1, BSL2 and BSL3 of the Directive for Biological Agents, GMP-conform.The backrest made of plastic with its 3D-Flex function automatically adapts to the movements of the user and therefore follows the upper body when leaning back or turning sidewards.The Flex function on the front edge of the seat supports the forward-angled working which is typical for laboratory work.Its low weight and integrated handle provide maximum mobility and easy handling in the laboratory.Seat height adjustment by gas spring.Solid polished aluminium star base, flat design.The chrome-plated foot ring for the high chairs provides support through the wide tread area and can be easily and quickly adjusted in height.With certificate "Tested Safety" (GS mark).10 years warranty, Made in Germany.Accessories: Armrests (pair). Lab-Clip: The intelligent Lab-Clip enables Labsit to be easily, individually and quickly labelled, this creates order. Can be added or removed any time.
Colour:
Blue
|
Colour:
Black/blue
|
Description:
Castors
|
Manufacturer Article Number:
9123-MG01-3277-5
|
Material:
Artificial Leather
|
Material:
imitation leather
|
Max. sitting height:
650 mm
|
Min. sitting height:
450 mm
|
Seat height adjustment mm:
450-650
|
Sitting height:
450 ... 650 mm
|
Type:
Lab Chair
|
Type:
Labsit 2
|
Version (Foot):
Sit stop castors
|
Warranty:
10 years
|
With armrests:
No
|
With foot ring:
No
Labsit is the chair for all kinds of laboratories. Its intelligent Flex function offers comfort and laboratory ergonomics with minimal adjustments required. Labsit has all the properties required for laboratory work and, at the same time, it is light and universally applicable. Labsit is therefore a laboratory specialist and all-rounder all in one.Minimal joints: Hygienic design for easy cleaning and disinfection.Resistant to disinfectants and chemicals: Resistant to all of the usual disinfectants and chemicals.Seat upholstery made of artificial leather (soft and comfortable, washable and antibacterial) or soft-touch PU foam (extremly robust, washable and antibacterial) in black.Suitable for cleanrooms: Certified for the use in cleanrooms category 3 in accordance with ISO 14644-1.Adheres to biosafety level BSL1, BSL2 and BSL3 of the Directive for Biological Agents, GMP-conform.The backrest made of plastic with its 3D-Flex function automatically adapts to the movements of the user and therefore follows the upper body when leaning back or turning sidewards.The Flex function on the front edge of the seat supports the forward-angled working which is typical for laboratory work.Its low weight and integrated handle provide maximum mobility and easy handling in the laboratory.Seat height adjustment by gas spring.Solid polished aluminium star base, flat design.The chrome-plated foot ring for the high chairs provides support through the wide tread area and can be easily and quickly adjusted in height.With certificate "Tested Safety" (GS mark).10 years warranty, Made in Germany.Accessories: Armrests (pair). Lab-Clip: The intelligent Lab-Clip enables Labsit to be easily, individually and quickly labelled, this creates order. Can be added or removed any time.Labsit is the chair for all kinds of laboratories. Its intelligent Flex function offers comfort and laboratory ergonomics with minimal adjustments required. Labsit has all the properties required for laboratory work and, at the same time, it is light and universally applicable. Labsit is therefore a laboratory specialist and all-rounder all in one.Minimal joints: Hygienic design for easy cleaning and disinfection.Resistant to disinfectants and chemicals: Resistant to all of the usual disinfectants and chemicals.Seat upholstery made of artificial leather (soft and comfortable, washable and antibacterial) or soft-touch PU foam (extremly robust, washable and antibacterial) in black.Suitable for cleanrooms: Certified for the use in cleanrooms category 3 in accordance with ISO 14644-1.Adheres to biosafety level BSL1, BSL2 and BSL3 of the Directive for Biological Agents, GMP-conform.The backrest made of plastic with its 3D-Flex function automatically adapts to the movements of the user and therefore follows the upper body when leaning back or turning sidewards.The Flex function on the front edge of the seat supports the forward-angled working which is typical for laboratory work.Its low weight and integrated handle provide maximum mobility and easy handling in the laboratory.Seat height adjustment by gas spring.Solid polished aluminium star base, flat design.The chrome-plated foot ring for the high chairs provides support through the wide tread area and can be easily and quickly adjusted in height.With certificate "Tested Safety" (GS mark).10 years warranty, Made in Germany.Accessories: Armrests (pair). Lab-Clip: The intelligent Lab-Clip enables Labsit to be easily, individually and quickly labelled, this creates order. Can be added or removed any time.
Dimensions (D x W) mm:
600 x 900
|
Manufacturer Article Number:
1-3456-32
|
Thickness mm:
6
Removes dust and dirt from shoe soles.Adhesiveness can be restored by wiping with waterAntibacterialWhipeable
Variants from €519.80*
Colour:
white
|
Description:
1 mat of 30 sheets
|
Manufacturer Article Number:
SM46115-W
The Sticky Mat provides a fast, convenient, reliable way to clean shoe soles or other items before entering a clean and sanitary area. Sticky Mats significantly reduce traffic-borne contaminants.Each Sticky Mat consists of a stack of tear-off adhesive polyethylene sheets, effectively capturing dirt and dust from foot-traffic and equipment wheels before they enter controlled environments. A clear release sheet protects the top sheet of the sticky mat until it is ready to use. The corner tabs are consecutively numbered to show the number of remaining sheets, thereby helping you to keep track of the number of sheets remaining and preventing multiple sheets being removed at once.Ergomat White Sticky Mats are produced in an 46 x 114 cm sheet, sold in pads of 30 sheets, with 10 pads per box (300 sheets total.)
Variants from €86.64*
Colour:
Black
|
Manufacturer Article Number:
9473R-MG01
|
Material:
Leather substitute
|
Max. sitting height:
800 mm
|
Min. sitting height:
540 mm
|
Sitting height:
540 ... 800 mm
|
Suitable for cleanroom:
Yes
|
Version (Foot):
Castors
Cleanroom saddle stool with castorsIntuitive 3D seat dynamics3-zone upholstery foamSeamless and crease-free upholsteryCleanroom class 3 in accordance with DIN EN ISO 14644-1Conductive in accordance with EN 61340-5-1Polished aluminium base
Description:
Foot ring, chrome plated
|
Manufacturer Article Number:
100702
|
Type:
GMP
|
Ø:
540 mm
Description:
Soft sit-stop castors
|
For:
Neon/Sintec/Solitec/All-In-One/Labsit
|
Manufacturer Article Number:
23022.0217.02
Colour:
green
|
Dimensions (D x W) mm:
450 x 900
|
Manufacturer Article Number:
1-3933-71
|
Thickness µm:
35
Removes dust and dirt from shoe soles.Medium adhesiveWith count-up tagWater-soluble adhesive1 carton with 6 mats, 30 layers
Dimensions (D x W) mm:
420 x 178.5
|
Manufacturer Article Number:
3-2000-01
|
Type:
Hangers
Hangers with name tagsHooks for hanging masks and gloves
Variants from €6.48*
Depth mm:
600
|
Description:
with perforated worktop
|
Height mm:
900
|
Manufacturer Article Number:
5372230100
|
Width mm:
800
Clean room worktable consisting of worktop and underframeMaterial stainless steel (1.4301 / AISI 304)Table top made of 1.5 mm thick stainless steel 42 mm bevelled on all sides, 12 mm of which 15 ° after folded inside Functional surfaces in KEK-Finish Dimension punching (ø10 mm in the grid 15 x 15 mm) to support the laminar flow of air depending on design and dimensions stabilized by reinforcementBase frame made of square tubesGround floor with perforated surface dimension punching (ø10 mm in the grid 15 x 15 mm) firmly weldedFloor leveling
Colour:
black
|
Description:
Infinity Smooth
|
Height mm:
11
|
Manufacturer Article Number:
INS6090-BK
Polyurethane anti-fatigue mat. Due to its closed surface the Infinity Smooth Mat is very easy to clean and has a very good chemical and UV resistance (except for organic solvents).Solid workstation mat with filled nubsDimensions 600 x 900 mmShaped bevelled edgesSilicone und Latex-freeAnti-static propertiesSuitable for use in cleanrooms of class ISO 56 years warranty
Colour:
white
|
Dimensions (D x W) mm:
450 x 900
|
Manufacturer Article Number:
1-4737-71
|
Thickness µm:
35
|
Type:
Medium adhesive, 30 layers
If the top adhesive mat is soiled, you can simply remove this layer and work directly on the next one of the stack. The number of remaining mats on the stack is indicated by the number in the corner. 30 layers.Medium or weak adhesiveAntistaticSurface resistance: 109 - 1011ΩWith serial layer number (count-down), with a tickness of 35 µm per layerWater soluble adhesive1 carton with 10 mats, 30 layers or 1 carton with 6 mats, 60 layers
Depth mm:
600
|
Description:
Cleanroom table with a smooth worktop
|
Height mm:
900
|
Manufacturer Article Number:
5372225300
|
Width mm:
800
Clean room worktable consisting of worktop and underframeMaterial stainless steel (1.4301 / AISI 304)Table top made of 1.5 mm thick stainless steel42 mm bevelled on all sides, 12 mm of which 15 ° after folded inside Functional surfaces in KEK-Finish smooth surface depending on design and dimensions stabilized by reinforcementBase frame made of square tubesGround floor with smooth surface firmly weldedFloor leveling
Depth mm:
600
|
Description:
with smooth shelve
|
Height mm:
1000
|
Manufacturer Article Number:
5372290000
|
Width mm:
800
Material stainless steel (1.4301 / AISI 304)Functional surfaces in KEK-FinishShelves with a smooth surface or shelves with punched holes (ø 10 mm in 15 x 15 mm grid) to support the laminar flow of airFirmly weldedStabilized by reinforcement depending on design and dimensionsSquare profiles closed at the top with plastic caps4 castors electrically conductive, 2 of them lockable
Depth mm:
600
|
Description:
with smooth shelves
|
Height mm:
900
|
Manufacturer Article Number:
5372264500
|
No. of shelves:
3
|
Width mm:
800
Cleanroom racks consisting of base frame and welded in shelves.Material stainless steel (1.4301 / AISI 304)Functional surfaces in KEK-FinishBase frame made of square tubeupper ends closed with plastic capsFloor leveling with disc feets made of CNS (+/- 10 mm)Shelves, folded on all sidesfirmly weldedsmooth surfacefor perforated version: Dimension punching ø 10 mm in 15 x 15 mm grid to support the laminar flow of airdepending on design and dimensions stabilized by reinforcement
Depth mm:
450
|
Description:
Single sided version, 9 compartments
|
Height mm:
600
|
Manufacturer Article Number:
5370295700
|
Width mm:
820
Sit-Over-Bench consisting of seating area, compartments for shoes and plinthMaterial: AISI 304Working surfaces: KEK-FinishSingle sided version with rear panel or double sided versionShoe boxes in three rows
Colour:
Transparent
|
Height:
76 mm
|
Manufacturer Article Number:
5-001-31
|
Material:
PP
|
Neck int. Ø:
11 mm
|
Nominal capacity:
50 ml
|
Sterile:
Yes
|
Type of closure:
Screw cap
|
UNSPSC:
41121804
|
Ø:
40 mm
Sterilisized with gamma rays
Variants from €147.17*
Colour:
blue
|
Dimensions (D x W) mm:
450 x 900
|
Manufacturer Article Number:
2-4909-01
|
Thickness µm:
45
|
Type:
Strong adhesive
Removes dust and dirt from shoe soles in different adhesive levels with a thickness of 45 µm per layer.With count-up tagWater-soluble adhesive1 carton with 10 mats, 30 layers
Variants from €117.99*
Dimensions (D x W) mm:
575 x 1025
|
For:
450 x 900
|
Manufacturer Article Number:
6-7585-11
|
Material:
Rubber
Frame for sticky mats in different sizes.
Colour:
Transparent
|
Height:
77 mm
|
Manufacturer Article Number:
5-002-31
|
Material:
PP
|
Neck int. Ø:
25 mm
|
Nominal capacity:
50 ml
|
Sterile:
Yes
|
Type of closure:
Screw cap
|
UNSPSC:
41121804
|
Ø:
40 mm
Sterilisized with gamma rays
Variants from €273.49*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*