Colour:
Transparent
|
Colour graduation:
Blue
|
Division:
0.2 ml
|
Height:
140 mm
|
Manufacturer Article Number:
0256000
|
Material:
PP
|
Nominal capacity:
10 ml
|
Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles):
Tall
|
Tolerance:
0.2 ml
|
UNSPSC:
41121805
Tall form, with spout, high clarity. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions. Food-safe, autoclavable.
Autoclavable:
Yes
|
Colour:
Transparent
|
Division:
2.0 ml
|
Food safe:
Yes
|
Graduation:
20 ml
|
Height:
315 mm
|
Manufacturer Article Number:
0108000
|
Material:
PP
|
Max. temperature resistance:
100 °C
|
Nominal capacity:
250 ml
|
Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles):
Tall
|
Temperature resistance:
100 °C
|
Tolerance:
2.0 ml
|
Type of graduation:
Embossed
|
UNSPSC:
41121805
|
Ø:
41.5 mm
Conforms to ISO 6706 - 1981 (E), high transparency. Autoclavable at 121 °C for 20 min., permanently heat resistant up to 100 °C. Durable, moulded graduation. Inner surface with very low wettability, therefore no meniscus formation. Food safe.
Variants from €8.26*
Colour:
Transparent
|
Colour graduation:
Blue
|
Height:
135 mm
|
Manufacturer Article Number:
016.06.010
|
Material:
PP
|
Max. temperature resistance:
60 °C
|
Nominal capacity:
10 ml
|
Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles):
Tall
|
Standard:
DIN 12681 / ISO 6706
|
Temperature resistance:
60 °C
|
Tolerance:
0.200 ml
|
UNSPSC:
41121805
Tall form, highly transparent, with blue graduations, hexagonal base, calibrated to contain (IN). Tolerances class B according to DIN 12681 / ISO 6706. Exposure to temperatures above 60 °C may effect accuracy. Cleaning up to max. 60 °C is recommended to preserve marks and inscriptions.
Accuracy class:
A
|
Colour:
Clear
|
Ground size:
NS12/21
|
Manufacturer Article Number:
013.01.026
|
Material:
Boro 3.3
|
Material closure:
PE
|
Nominal capacity:
25 ml
|
Standard:
DIN EN ISO 1042
|
Tolerance:
0,060 ±·ml
|
Type of closure:
Stopper
|
UNSPSC:
41121804
Borosilicate glass 3.3. Conformity certified, with batch certificate. With NS and PE stoppers, to DIN EN ISO 1042. Calibrated to contain (IN) and all the tolerances are according to DIN/ISO Class A standards.
Variants from €14.72*
Autoclavable:
Yes
|
Division:
5 ml
|
Food safe:
Yes
|
Graduation:
25 ml
|
Height:
178 mm
|
Manufacturer Article Number:
0081700
|
Material:
PP
|
Max. temperature resistance:
120 °C
|
Nominal capacity:
100 ml
|
Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles):
Low
|
Temperature resistance:
120 °C
|
Type of graduation:
Embossed
|
UNSPSC:
41121805
|
Ø:
34.0 mm
Low form, circular base. Excellent chemical resistance. Moulded graduation. Wide base for high stability. Food-safe, autoclavable.
Variants from €6.04*
Autoclavable:
Yes
|
Colour:
Crystal clear
|
Colour graduation:
White
|
Division:
200 ml
|
Food safe:
Yes
|
Height:
531 mm
|
Manufacturer Article Number:
0157700
|
Material:
PMP
|
Max. temperature resistance:
170 °C
|
Nominal capacity:
2000 ml
|
Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles):
Tall
|
Temperature resistance:
170 °C
|
Tolerance:
20.0 ml
|
UNSPSC:
41121805
Clear. Conforms to ISO 6706 - 1981 (E).Good chemical resistanceFor liquids up to 170 °CPentagon baseFood-safeAutoclavable
Variants from €9.88*
Accuracy class:
A
|
Colour:
Brown
|
Ground size:
NS12/21
|
Manufacturer Article Number:
014.01.026
|
Material:
Boro 3.3
|
Material closure:
PE
|
Nominal capacity:
25 ml
|
Standard:
DIN EN ISO 1042
|
Tolerance:
0,060 ± ml
|
Tolerance:
0,060 ±·ml
|
Type of closure:
Stopper
|
UNSPSC:
41121804
Amber Borosilicate glass with PE stoppers, DE-M marking, with batch certificate and white enamel graduations. According to DIN EN ISO 1042. Calibrated to contain (IN) and all the tolerances are according to DIN/ISO Class A standards.
Variants from €20.24*
Autoclavable:
Yes
|
Colour graduation:
Blue
|
Division:
2 ml
|
Food safe:
Yes
|
Height:
140 mm
|
Manufacturer Article Number:
0257000
|
Material:
PMP
|
Nominal capacity:
10 ml
|
Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles):
Tall
|
Tolerance:
0.2 ml
|
UNSPSC:
41121805
Tall form, with spout, transparent. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 121°C (autoclaving) will not cause tolerance limits to be permanently exceeded! Cleaning temperature below 60°C is recommended to preserve graduations and inscriptions. Food-safe.
Autoclavable:
Yes
|
Food safe:
Yes
|
Manufacturer Article Number:
0148400
|
Material:
PP
|
Nominal capacity:
25 ml
|
Type of closure:
Stopper
|
UNSPSC:
41121804
With stoppersNo meniscusCalibrated gravimetrically at 20 °CChemically non-absorbentNon wetting surfaceThick walls eliminate distortionFood-safeAutoclavable
Accuracy class:
A
|
Colour:
Clear
|
Ground size:
NS10/19
|
Manufacturer Article Number:
013.01.005C
|
Material:
Boro 3.3
|
Material closure:
PE
|
Nominal capacity:
5 ml
|
Standard:
DIN EN ISO 1042
|
Type of closure:
Stopper
|
UNSPSC:
41121804
The flasks are coated with a special formulated coating that holds the broken parts together in case of breakage. The transparent coating can resist up to 135°C with maximum period of 30 minutes. Coated flasks should not be exposed directly to open flame.Conformity certified, with batch certificateDIN EN ISO 1042Calibrated to contain (IN)
Accuracy class:
A
|
Colour:
Clear
|
Ground size:
NS12/21
|
Height:
170 mm
|
Manufacturer Article Number:
2820180 VE=2
|
Material:
DURAN® glass
|
Material closure:
PE
|
Nominal capacity:
100 ml
|
Standard:
DIN EN ISO 1042
|
Tolerance:
0,1 ± ml
|
Tolerance:
0,1 ±·ml
|
UNSPSC:
41121804
IN (TD) calibrated. With dated batch identification. Declaration of conformity acc. to DIN 12600. With NS ground joint and polystopper. Ring mark and graduation in durable blue enamel, acc.to DIN EN ISO 1042.For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available. Also available with dated batch identfication acc. to USP (US Pharmacopeia).
Variants from €18.60*
Autoclavable:
Yes
|
Food safe:
Yes
|
Manufacturer Article Number:
0248500
|
Material:
PMP
|
Nominal capacity:
50 ml
|
Type of closure:
Stopper
|
UNSPSC:
41121804
With stoppers.No meniscusCalibrated gravimetrically at 20 °CChemically non-absorbentNon wetting surfaceThick walls eliminate distortionFood-safeAutoclavable to 170 °C
Accuracy class:
A
|
Ground size:
NS12/21
|
Height:
110 mm
|
Manufacturer Article Number:
2822171
|
Material:
DURAN® glass
|
Material closure:
PE
|
Nominal capacity:
25 ml
|
Standard:
DIN 12600, DIN EN ISO 1042
|
Tolerance:
0,06 ± ml
|
Tolerance:
0,06 ±·ml
|
Type of closure:
Stopper
|
UNSPSC:
41121804
IN (TD) calibrated. With dated batch identification. Declaration of conformity acc. to DIN 12600. NS ground with polystopper. With durable amber stain graduation. According to DIN EN ISO 1042. For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available.* wide neck
Variants from €20.30*
Colour graduation:
Blue
|
Height:
115 mm
|
Manufacturer Article Number:
015.01.005
|
Material:
Boro 3.3
|
Nominal capacity:
5 ml
|
Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles):
Tall
|
Standard:
DIN EN ISO 4788
|
Tolerance:
0.05 ml
|
UNSPSC:
41121805
|
With spout:
Yes
Conformity certified with batch IDDIN EN ISO 4788Hexagonal foot with spoutCalibrated to contain (IN)Inscriptions are printed with blue enamelBatch certificate can be downloaded from website
Variants from €13.22*
Colour:
Transparent
|
Division:
0.2 ml
|
Height:
135 mm
|
Manufacturer Article Number:
016.05.010
|
Material:
PP
|
Max. temperature resistance:
60 °C
|
Nominal capacity:
10 ml
|
Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles):
Tall
|
Standard:
DIN 12681/ ISO 6706
|
Temperature resistance:
60 °C
|
Tolerance:
0.2 ml
|
Type of graduation:
Embossed
|
UNSPSC:
41121805
Manufactured from ultra clear, virgin polypropylene and its thick walls eliminate distortion.They offer high transperency, chemical resistance and remarkable heat tolerance.They meet the highest quality standards according to DIN 12681 and ISO 6706.Individually calibrated through automatic calibration process carried out by robots.Permanent quality control through all steps eliminate possible deviations from nominal values.Cylinders are calibrated to contain (In) and the tolerances are according to DIN/ISO Class "B" standards.Graduations are embossed and specially designed for plastic and resistant to 60°C.For consistent accurracy, polypropylene measuring cylinders should not be used with liquids over 60°C and should not be kept under direct sunlight or overheated conditions.
Colour graduation:
Blue
|
Division:
0.1 ml
|
Height:
115 mm
|
Manufacturer Article Number:
2240154 VE=2
|
Nominal capacity:
5 ml
|
Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles):
Tall
|
Standard:
DIN 12600, DIN EN ISO 4788
|
Tolerance:
0.05 ml
|
UNSPSC:
41121805
|
With spout:
Yes
IN (TD) calibrated. With spout and hexagonal glass base. Main point ring graduation. With dated batch identification. Declaration of conformity acc. to DIN 12600. Graduation in durable blue enamel, acc.to DIN EN ISO 4788.For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available. Also available with dated batch identfication acc. to USP (US Pharmacopeia).
Variants from €12.90*
Colour graduation:
Brown
|
Division:
10.0 ml
|
Height:
470 mm
|
Manufacturer Article Number:
2210193
|
Nominal capacity:
1000 ml
|
Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles):
Tall
|
Standard:
DIN 12600, DIN EN ISO 4788
|
Tolerance:
5.0 ml
|
UNSPSC:
41121805
|
With spout:
Yes
IN (TC) calibrated. With spout and hexagonal glass base. Main point ring graduation. With dated batch identification. Declaration of conformity acc. to DIN 12600. With durable amber stain graduation, acc. to DIN EN ISO 4788.For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available.
Variants from €12.90*
Accuracy class:
A
|
Ground size:
NS14/23
|
Manufacturer Article Number:
36979
|
Manufacturer Article Number:
36979 ALT
|
Material:
Boro 3.3
|
Material closure:
Glass
|
Nominal capacity:
100 ml
|
Standard:
DIN EN ISO 1042
|
Tolerance:
0.08 ± ml
|
Tolerance:
0.08 ±·ml
|
Type of closure:
Stopper
|
UNSPSC:
41121804
All Blaubrand® volumetric flasks are delivered with batch number and one batch certificate included per pack. They are also available with individual certificates or DAkkS calibration certificate upon request.DIN EN ISO 1042DE-M markingGraduation and inscriptions in highly contrasting blue enamelCalibrated to contain (IN)
Variants from €23.90*
Accuracy class:
A
|
Ground size:
NS10/19
|
Manufacturer Article Number:
36943 VE
|
Manufacturer Article Number:
36943
|
Material:
Boro 3.3
|
Material closure:
PP
|
Nominal capacity:
10 ml
|
Standard:
DIN EN ISO 1042
|
Tolerance:
0,02 ± ml
|
Tolerance:
±0.02 ml
|
Tolerance:
0,02 ±·ml
|
Type of closure:
Stopper
|
UNSPSC:
41121804
All Blaubrand® volumetric flasks are delivered with batch number and one batch certificate included per pack. They are also available with individual certificates or DAkkS calibration certificate upon request.DIN EN ISO 1042DE-M markingGraduation and inscriptions in highly contrasting blue enamelCalibrated to contain (IN)
Accuracy class:
A
|
Ground size:
NS14/23
|
Manufacturer Article Number:
37261
|
Manufacturer Article Number:
37261 VE
|
Material:
Boro 3.3
|
Material closure:
Glass
|
Nominal capacity:
200 ml
|
Standard:
DIN EN ISO 1042
|
Tolerance:
±0.15 ml
|
Tolerance:
0,15 ±·ml
|
Tolerance:
0,15 ± ml
|
Type of closure:
NS stopper
|
Type of closure:
Stopper
|
UNSPSC:
41121804
All Blaubrand® volumetric flasks are delivered with batch number and one batch certificate included per pack. They are also available with individual certificates or DAkkS calibration certificate upon request.DIN EN ISO 1042DE-M markingRing marks and inscriptions in highly contrasting blue enamelCalibrated to contain (IN)
Accuracy class:
A
|
Colour:
Brown
|
Ground size:
NS7/16
|
Height:
70 mm
|
Manufacturer Article Number:
2640152
|
Material:
DURAN® glass
|
Material closure:
PE
|
Nominal capacity:
5 ml
|
Standard:
DIN 12600, DIN EN ISO 1042
|
Tolerance:
0,025 ±·ml
|
Tolerance:
0,025 ± ml
|
Type of closure:
Stopper
|
UNSPSC:
41121804
IN (TD) calibrated. Amber glass. With dated batch identification. Declaration of conformity acc. to DIN 12600. With NS and polystopper. Ring mark and graduation in durable white enamel, acc.to DIN EN ISO 1042. For these products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available.* Wide neck.Also available with dated batch identfication acc. to USP (US Pharmacopeia).
Variants from €34.90*
Accuracy class:
A
|
Ground size:
NS14/23
|
Height:
220 mm
|
Manufacturer Article Number:
2820386
|
Material:
DURAN® glass
|
Nominal capacity:
250 ml
|
Standard:
DIN EN ISO 1042
|
Tolerance:
0,15 ±·ml
|
Tolerance:
0,15 ± ml
|
Type of closure:
Without
|
UNSPSC:
41121804
Certified conformity, with dated batch identification, standard ground, without stopper, calibrated for IN, DIN EN ISO 1042. Additional batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com.
Variants from €19.90*
Accuracy class:
A
|
Colour:
Clear
|
Ground size:
NS7/16
|
Height:
60 mm
|
Manufacturer Article Number:
2960133
|
Material:
DURAN® glass
|
Material closure:
PE
|
Nominal capacity:
1 ml
|
Standard:
DIN EN ISO 1042
|
Tolerance:
0,025 ±·ml
|
Tolerance:
0,025 ± ml
|
Type of closure:
Stopper
|
UNSPSC:
41121804
IN (TD) calibrated. With dated batch identification. Declaration of conformity acc. to DIN 12600. NS ground with poly stopper. Ring mark and graduation in high contrasting blue enamel. According to DIN EN ISO 1042.For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available.
Accuracy class:
A
|
Ground size:
NS14/23
|
Manufacturer Article Number:
36851 ALT
|
Manufacturer Article Number:
36851
|
Material:
Boro 3.3
|
Material closure:
PP
|
Nominal capacity:
250 ml
|
Standard:
DIN EN ISO 1042
|
Tolerance:
±0.15 ml
|
Type of closure:
Stopper
|
UNSPSC:
41121804
All Blaubrand® volumetric flasks are delivered with batch number and one batch certificate included per pack. They are also available with individual certificates or DAkkS calibration certificate upon request.BLAUBRAND® ETERNADIN EN ISO 1042DE-M markingGraduation and inscriptions in Eterna amber stainCalibrated to contain (IN)