For torque testing of bottles and other packaging with screw tops. Quick pin system: The four bottle mounts are pushed in, instead of being screwed in, to save time. This allows you to reconfigure quickly for other bottle sizes.Can be used in both directions of rotationMetal housingCapacity display: A bar lights up to show how much of the measuring range is still availablePeak hold mode to capture peaksFunction to set limits: Input of an upper/lower limit valueVisual and acoustic signalAUTO-OFF functionBack-lit LCD graphic displayInternal data memory saves up to 500 measurementsMemory contents can be transferred to the PC using optional softwareUSB and RS 232 data interfacesRubber feet with anti-slip featureScope of supply: Digital torque measurement, four bottle mounts with rubber coat, sturdy carry case

Portable Leeb hardness tester for professional applications.Innovative touchscreenAutomatic recognition of the impact (rebound) sensor connected to the HMOAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to measurementsMini statistics function: Displays the measure value, the average value, the difference between the maximum and minimum values, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsRechargeable battery operationUSB interface for connection to the printer and charging the batteriesScope of supply:Leeb hardness tester, carrying case, standard block, mains adapter

The Leeb hardness tester measures metallic samples and offers mobility and flexibility compared to stationary tabletop devices and testing devices with internal sensor.External impact sensorAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 600 data groupsMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (Type A, B, C), Vickers (HV), Shore (HS), Leeb (HL), Brinell (HB)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmedAcoustic and visual signalMatrix display: Backlit multi-function displayRobust metal housingScope of supply:HK-D: Mobile Leeb hardness tester, hard carrying caseHK-DB: Mobile Leeb hardness tester, hard carrying case, standard block for calibration, hardness approx. 800 HLD

Force-measurement device with external, high-resolution measuring cell for very slight forces or loads in machines and plants.High-resolution displayPeak Hold ModeFunction to set limits: Input of an upper/lower limit valueVisual and acoustic signalData interface RS-232Rechargeable battery packSuitable for almost all SAUTER test standsScope of supply:Force gauge, mains adapter

Advanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness values.External impact sensor (Type D) includedAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionStandard block for calibration included (approx. 790 ± 40 HL)Internal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsDelivered in a hard carrying caseWireless IR printer included for on-site printing of measurement protocols (battery operated)

Content: 1 power blower, cleaning liquid, cleaning cloth, retractable brush

Universal digital force gauges with integrated measuring cell.Turnable display with backlightCan be mounted on all SAUTER test standsMetal housingSelectable measuring units: N, kN, kg, oz, lbReal time or Peak Hold Mode to observe transcients or capture peaksCapacity display: A bar lights up to show how much of the measuring range is still availableMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signalInternal memory for up to 500 measurementsContinuous analogue output: Linear voltage signal in relation to the load (-2 up to +2 V)Scope of supply: Digital force gauge, hard carrying case, 3 standard attachments (FL 2K: with external measuring cell, tension loops and pressure plates, without standard attachments)

Robust Push/Pull force gauge for simple measurement.Turnable display: automatic direction identificationSecure operability due to ergonomic designPeak-hold function to capture peaks (value is "frozen" for approx. 10 seconds) or Track function mode for a continuous measurement indicationSelectable measuring units: N, lb, kg, ozAuto-Power-OffCan be mounted on all SAUTER test stands

Selectable measuring units: mm, inchData interface RS-232Battery operationScope of supply:Ultrasonic thickness gauge, base plate for adjustment, external sensor (8 mm), carrying case

For measuring push and pull forces with peak hold function.Dual scale: shows Newton and kgRotatable display unit for an easy calibration of the instrumentPeak hold function by drag pointerCan be mounted on all manual test standsZeroing by a short push of the switchScope of supply:Mechanical force gauge, carrying case, standard attachments, extension rod 90 mm

Scan mode (10 measurements per sec.) or single point measuring modeInternal memory for up to 20 files (with up to 100 values per file)Selectable measuring units: mm, inchBattery operationUSB data interfaces as standard (for models with readout 0.01 mm)Scope of supply:Ultrasonic thickness gauge, external sensor, carrying case

Universal digital force gauges for tension and compression tests with integrated measuring cell.Turnable display with backlightDigital force gauge with internal sensorData interface RS-232Selectable measuring units: N, lb, kgPeak-Hold function to capture peaks (measurement result will be "frozen" for a short time) or Track function mode for a continuous measurement indication (period of time approx. 10 s)Function to set limits, programming of Max./ Min., in pull and push direction, with output of acoustic and optical signal. Ideal mode for efficient and accurate testing of standard partsAuto-Power-OffInternal memory for up to 10 measurementsMini Statistics Kit: calculates the average result from up to ten stored single results, min., max., nCan be mounted on all SAUTER test standsScope of supply: Force gauge, carrying case

For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, mlAuto-Power-OffBattery operationData interface RS-232Scope of supply: Coating thickness gauge, external sensor, base plate, calibration foils, carrying case

For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying case

Compact handheld durometer for plastics with digital display.Measurement of penetration depth (Shore)Material thickness of the sample, min. 6 mmParticularly recommended for internal comparison measurement. Standard calibrations e.g. to DIN 48-4 are not possible because of very narrow standard tolerancesCan be attached to the test stands TI-ACL (for Shore A and Shore 0) and TI-DL (for Shore D)Large display with backlightSelectable: AUTO-OFF function or continuous operation, charge indicatorDelivered in a hard carrying caseShore A: rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materialsShore 0: foams, spongesShore D: plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.

Manual test stand for compressive force measurement.Quick and consistent testingHigh level of security with repeated measurementsPrecise measuring resultsSlide construction for distance measurementLarge base plate with various holes for fixture mountings

Manual test stand for highly accurate tensile and compressive force measurement, with length measurement.For vertical and horizontal usePrecise measurement resultsHigh level of security with repeated measurementsLarge base plate with various holes for fixture mountingsCan be used for force gauges up to 500 N (not included)Digital length meter: Zero setting possible, pre-length can be set manually

The BA310 MET series is the ideal microscope for industrial quality inspection or material science. Different alternative stand options also allow applications in brightfield or examination of larger samplesInfinity Optics [CCIS®]Observation Tube Trinocular 30° (Light split 100:00/20:80), F.N. 20Interpupillary distance 48-75mmWidefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces and rubber eyecupsReversed quintuple revolving nosepieceCCIS LM Plan Achromatic objectives 5X, 10X, 20X, 50XCoaxial course and fine focusing systemMechanical stage, hard coated with built-in low position coaxial stage controlEpi-illuminator 12V/50W quartz halogen with integrated field and aperture diaphragms and external lamphousePower supply 100-240V (CE)Power cord, Allen hexagonal key, vinyl dust coverThe BA310 MET series is the ideal microscope for industrial quality inspection or material science. Different alternative stand options also allow applications in brightfield or examination of larger samplesInfinity Optics [CCIS®]Observation Tube Trinocular 30° (Light split 100:00/20:80), F.N. 20Interpupillary distance 48-75mmWidefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces and rubber eyecupsReversed quintuple revolving nosepieceCCIS LM Plan Achromatic objectives 5X, 10X, 20X, 50XCoaxial course and fine focusing systemMechanical stage, hard coated with built-in low position coaxial stage controlEpi-illuminator 12V/50W quartz halogen with integrated field and aperture diaphragms and external lamphousePower supply 100-240V (CE)Power cord, Allen hexagonal key, vinyl dust cover

The BA310 MET series is the ideal microscope for industrial quality inspection or material science. Different alternative stand options also allow applications in brightfield or examination of larger samplesInfinity Optics [CCIS®]Observation Tube Trinocular 30° (Light split 100:00/20:80), F.N. 20Interpupillary distance 48-75mmWidefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces and rubber eyecupsReversed quintuple revolving nosepieceCCIS LM Plan Achromatic objectives 5X, 10X, 20X, 50XCoaxial course and fine focusing systemMechanical stage, hard coated with built-in low position coaxial stage controlEpi-illuminator 12V/50W quartz halogen with integrated field and aperture diaphragms and external lamphousePower supply 100-240V (CE)Power cord, Allen hexagonal key, vinyl dust coverCoaxial course and fine focusing system, course focusing system adjustableTransmitted illumination of 6V/30W Quartz Halogen Koehler illumination with intensity controlBlue, frosted, green and yellow filtersInterchangeable LED modul for transmitted light available

An extremely powerful yet affordable Polarization microscope for Transmitted light samples. Designed for the examination of birefringent samples from petrography and mineralogy, and can also be used for the synthetic materials in industry.Infinity Optics [CCIS®]Observation Tube Siedentopf Type, Trinocular-/Phototube 30°, F.N. 20Interpupillary Distance 55-75 mmEyepieces High-Eyepoint N-WF 10x/20 mm with dioptre adjustment on both eyepieces and rubber eyecupsRotatable analyzer 360°, Bertrand lens 0,5X and slot for compensatorsReversed quadruple revolving nosepiece, single centrable positionsObjectives CCIS® EC Plan Achromatic Strain-free 4x, 10x, 40x-S, 60x-S360° circular rotating stage, 160 mm diameter, 1° increments, 0,1°vernier scale and lockableAchromat swing-out condenser N.A. 0.90/0.13 (strain-free) with iris diaphragm and rotatable polarizerKoehler illumination quartz halogen 6V/30 W with intensity controlUniversal power supply 100-240 V (CE)Empty insertion plate, blue filter, power cord, Allen hexagonal key, vinyl dust cover and spare fuse

Universal digital force-measuring devices for tensile and compressive force measurement with external measuring cell.Turnable display with backlightPeak Hold functionMeasuring with tolerance range (limit-setting function)Acoustic and optical signalAuto-Power-OffInternal memoryData interface RS-232Rechargeable battery pack integratedScope of supply:Force gauge, hard carrying case, tension loops, pressure plates, 3 m cable

Force gauge with integrated measuring cell for tensile and compressive force measurement. If an external measuring channel is used, the internal load cell is deactivated as long as an external load cell is connected. Suitable for 4-wire and 6-wire sensors with strain gauges.3,5" touchscreenSimultaneous measurement on up to four channelsTwo-point adjustment with weights or numerical adjustment possibleExternal sensor data is stored directly in the connectorUSB interface for programming, data transfer and power supplyIntegrated SD card memoryTolerance functionTRACK function for continuous display of the measurementPeak value measurementRechargeable battery operationCan be mounted on all SAUTER test standsScope of supply:Force gauge, system case (systainer® T-LOC), plug-in power supply, USB cable type C

Pen type hardness testing device in accordance with Leeb testing for mobile hardness testing of metals.LCD displayAll measurement directions possible (360°) thanks to an automatic compensation functionInternal impact sensor (Type D)Internal memory for up to measurements with date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL)Rechargeable battery operationData interface USBScope of supply:Leeb hardness tester, carrying case, USB interface cable, mains adapter

For tensile and compressive force measurement. The set consists of test stand TVL, digital force gauge FH 500, 2 x screw clamp AE 500, threaded pin AFM 20.