Autoclavable:
Yes
|
Colour:
Blue/green
|
Depth:
56 mm
|
Dimensions (WxDxH):
181 x 56 x 76 mm
|
For vessel Ø:
12...30 mm
|
For vessels:
5...50 ml
|
Height:
76 mm
|
Manufacturer Article Number:
HS120184
|
Material:
POM
|
No. of positions:
4
|
UNSPSC:
41122804
|
Width:
181 mm
Capable of holding different size tubes in each available slot as the well literally adapts to your tube size to hold firming in an upright position. The design enables you to hold 12 to 30mm (5 to 50ml) tubes simultaneously and still allow full viewing of the tube label. Racks can be linked together for additional holding capacity. Autoclavable. Dimensions (W x D x H): 181 x 56 x 76mm
Variants from €18.20*
Autoclavable:
Yes
|
Colour:
Blue
|
Depth:
121 mm
|
Dimensions (WxDxH):
246 x 121 x 50 mm
|
Height:
50 mm
|
Manufacturer Article Number:
HS2345C
|
Material:
PP
|
UNSPSC:
41122804
|
Width:
246 mm
Autoclavable. Polypropylene rack has 96 wells for 0.5 ml microcentrifuge tubes on one side, and 96 wells for 1.5 ml to 2.0 ml microcentrifuge tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack.
Autoclavable:
Yes
|
Colour:
Natural
|
Depth:
95 mm
|
Dimensions (WxDxH):
175 x 95 x 51 mm
|
Height:
51 mm
|
Manufacturer Article Number:
HS29022A
|
Material:
PP
|
UNSPSC:
41122804
|
Width:
175 mm
Racks feature a unique system of tabs and slots, which facilitate easy assembly and sturdy fit to build as large as rack as you need. Heavy-duty polypropylene racks can hold 4 x 50 ml or 12 x 15 ml conical tubes, 32 x 1.5 ml or 32 x 0.5 ml microtubes. Autoclavable.
Autoclavable:
Yes
|
Colour:
Colour sorted
|
Depth:
67 mm
|
Dimensions (WxDxH):
225 x 67 x 28 mm
|
For vessels:
1,5/2,0 ml
|
Height:
28 mm
|
Manufacturer Article Number:
HS29025G
|
Material:
PP
|
No. of positions:
80
|
UNSPSC:
41122804
|
Width:
225 mm
Autoclavable. Popular fraction collector plate-style rack. Easily load and transfer 80 tubes with 1.5 ml or 2.0 ml in a compact format (5 x 16 array). Polypropylene rack has moulded-in coordinates to aid organisation. Assorted colours.Dimensions (L x W x H): 225 x 67 x 28mm
Variants from €15.54*
Autoclavable:
Yes
|
Depth:
110 mm
|
Dimensions (WxDxH):
224 x 110 x 110 mm
|
Height:
110 mm
|
Manufacturer Article Number:
HS29040A
|
Material:
PP
|
UNSPSC:
41122804
|
Width:
224 mm
Interlocked racks. Rotate each of the four modules independently. Use several sizes of test tubes, culture tubes, centrifuge tubes or microcentrifuge tubes at the same time. Autoclavable.Each module holds:2 x 50 ml tubes, 8 x 10-15 ml tubes, 6 x 15-20 ml tubes or 10 x 10-13 ml tubes
Height:
95 mm
|
Manufacturer Article Number:
51-0520
|
Material:
K-Resin®
|
No. of packages:
20
|
Package:
20 x Beutel à 25 Stück
|
Package capacity:
25 st
|
Ø:
25 mm
Hohe TransparenzSichere und kostengünstige Alternative zu GlasfläschchenEinfache Beobachtung der Proben
Variants from €161.00*
Dimensions (ØxL):
16 x 120 mm
|
Length:
120 mm
|
Manufacturer Article Number:
42770048
|
Material:
Soda-lime glass
|
UNSPSC:
41121701
|
Wall thickness:
0.5 mm
|
With beaded rim:
Yes
|
Ø:
16 mm
Round bottom.
Variants from €11.54*
Height:
95 mm
|
Manufacturer Article Number:
51-0510
|
Material:
PP
|
No. of packages:
20
|
Package:
20 x Beutel à 25 Stück
|
Package capacity:
25 st
|
Ø:
25 mm
Flexible, corrosion resistant, and fully autoclavable (121 °C, 15 min)Safe and cost-effective alternative to glass vialsEasy to observe samples
Autoclavable:
Yes
|
Colour:
White
|
Depth:
265 mm
|
Dimensions (WxDxH):
126 x 265 x 75 mm
|
For vessel Ø:
13 mm
|
Height:
75 mm
|
Manufacturer Article Number:
4340000 VE
|
Manufacturer Article Number:
4340000
|
Material:
PP
|
Max. temperature resistance:
90 °C
|
Min. temperature resistance:
-20 °C
|
No. of positions:
84
|
Temperature resistance:
-20 ... 90 °C
|
UNSPSC:
41122804
|
Width:
126 mm
PP. For all common test tube diameters. Very sturdy design. All openings are widely spaced apart to accommodate screw cap tubes. All racks have the same footprint and can be stacked easily when empty. Modified PP with greater density than water makes them ideal for use in water baths. Large marking area (60 x 12mm) for barcode labels and alphanumeric references for clear sample identification. Racks are supplied in three parts for quick and permanent assembly. Continuous use temperature -20 to 90 °C. Autoclavable at 121 °C (2 bar), according to DIN EN 285. Choice of colours as outlined below.
Autoclavable:
Yes
|
Colour:
Colour sorted
|
Depth:
151 mm
|
Dimensions (WxD):
141 x 151 mm
|
For tubes:
1,5/2,0 ml
|
Height:
57 mm
|
Manufacturer Article Number:
HS120044
|
Material:
PP
|
Min. temperature:
-80 °C
|
No. of positions:
100
|
Width:
141 mm
Autoclavable. Compact storage box has angled front slot for easy access to tubes. Rugged, polypropylene box has durable three-point hinges, snapping clasp for secure closure, moulded grid lines on lid, imprinted coordinates on bottom of base and imprinted and raised coordinates on tube wells. Ideal for sample or case study storage. Holds 1.5 ml to 2.0 ml microtubes. Resist storage temperatures from -80 to 121 °C.The set contains the colours blue, green, violet, yellow and orange.
Variants from €33.99*
Autoclavable:
Yes
|
Colour:
White
|
Depth:
126 mm
|
Dimensions (WxDxH):
265 x 126 x 38 mm
|
For vessel Ø:
11 mm
|
Height:
38 mm
|
Manufacturer Article Number:
4341050
|
Manufacturer Article Number:
4341050 VE
|
Material:
PP
|
Max. temperature resistance:
90 °C
|
Min. temperature resistance:
-20 °C
|
No. of positions:
128
|
Temperature resistance:
-20 ... 90 °C
|
UNSPSC:
41122804
|
Width:
265 mm
Stackable racks with alphanumerical positions. Operating temperature -20 °C to 90 °C. Autoclavable at 121 °C (2 bar), acc. DIN EN 285. Density 1.2 g/cm³. Will not float in water bath. Racks are supplied in two-pieces (up to Ø 11 mm, for micro tubes) or three-pieces (up to Ø 13 mm for cryogenic tubes) for convenient and permanent assembly.
Height:
95 mm
|
Manufacturer Article Number:
51-0500
|
Material:
PS
|
No. of packages:
20
|
Package:
20 x Beutel à 25 Stück
|
Package capacity:
25 st
|
Ø:
25 mm
High transparency and lightweightSafe and cost-effective alternative to glass vialsEasy to observe samples
Manufacturer Article Number:
51-17720
|
Material:
PP
|
No. of packages:
1
|
Nominal capacity:
177 ml
|
Package:
1 x Beutel à 200 Stück
|
Package capacity:
200 st
Corrosion-resistant and fully autoclavable (121°C, 15 min)Good temperature stabilityFirm, specially shaped neck prevents the stopper from falling inUniversal closure compatibility
Manufacturer Article Number:
51-22730
|
Material:
PE
|
No. of packages:
1
|
Nominal capacity:
227 ml
|
Package:
1 x Beutel à 100 Stück
|
Package capacity:
100 st
Sturdy bottle with good temperature stabilityFirm, specially shaped neck prevents the stopper from falling inUniversal closure compatibility
Depth:
256 mm
|
Dimensions (WxDxH):
256 x 256 x 30 mm
|
Height:
30 mm
|
Manufacturer Article Number:
51-05010
|
Material:
Plastic
|
Width:
256 mm
Suitable for vials with diameter of 25 mmWith 10x10 divider
Depth:
292 mm
|
Dimensions (WxDxH):
292 x 292 x 57 mm
|
Height:
57 mm
|
Manufacturer Article Number:
51-0X210
|
Material:
Aluminium
|
Width:
292 mm
Sturdy and durableWithout divider
Autoclavable:
Yes
|
Colour:
Blue
|
Dimensions (ØxH):
65 x 279 mm
|
For vessel Ø:
18...20 mm
|
For vessels:
10/15 ml
|
Height:
279 mm
|
Manufacturer Article Number:
HS120956
|
Material:
PP
|
No. of positions:
10
|
UNSPSC:
41122804
|
Ø:
65 mm
Efficient and practical solution for work processes with roller mixers. The tube rack can simultaneously process 10 tubes in the roller mixer. Processing larger quantities of tubes reduces the number of roller cycles and saves process time, money, and valuable space. The axis of the tube rack is parallel to the roller axis for horizontal rotation of the tubes. The tube rack slows down the speed of the roller mixer due to the larger rotation. This ensures more gentle sample mixing and reduces cell damage.Organize samples pre and post mixingCan also be used as a tube rack for upright storage or submerse in an ice bathWear-resistant PP constructionAutoclavable
Manufacturer Article Number:
51-17730
|
Material:
PE
|
No. of packages:
1
|
Nominal capacity:
177 ml
|
Package:
1 x Beutel à 200 Stück
|
Package capacity:
200 st
Sturdy bottle with good temperature stabilityFirm, specially shaped neck prevents the stopper from falling inUniversal closure compatibility
Manufacturer Article Number:
51-22720
|
Material:
PP
|
No. of packages:
1
|
Nominal capacity:
227 ml
|
Package:
1 x Beutel à 100 Stück
|
Package capacity:
100 st
Korrosionsbeständig und vollständig autoklavierbar (121°C, 15 min)Gute TemperaturstabilitätFester speziell geformter Hals verhindert das Hineinfallen des StopfensUniverselle Verschlusskompatibilität
Autoclavable:
Yes
|
Colour:
Blue/white
|
Depth:
115 mm
|
Dimensions (WxDxH):
200 x 115 x 50 mm
|
For vessel Ø:
12 ... 18 mm
|
Height:
50 mm
|
Manufacturer Article Number:
37 12 303
|
Material:
PP
|
Max. temperature resistance:
75 °C
|
No. of positions:
50
|
Temperature resistance:
75 °C
|
UNSPSC:
41122804
|
Width:
200 mm
Mit dem Multistand Plus können bis zu 50 Probenröhrchen sicher gelagert und platziert werden.Für Röhrchen von Ø 12 bis 18 mmTemperaturbeständig bis zu 75 °CAutoklavierbar
Manufacturer Article Number:
516.181.070-0312
|
Max. temperature resistance:
150 °C
|
No. of positions:
36
|
Temperature resistance:
150 °C
|
UNSPSC:
41122804
Reagenzglasgestell mit weißem Plastiküberzug, kurzzeitig bis 150 °C beständig mit 2 Facheinteilungen, Boden aus Schweißgitter w 8 mmFachanzahl: 3 x 12Gestellhöhe: 70 mmFachgröße: 18 x 18 mm (bis Ø 16 mm)
Colour:
Transparent
|
For ext. Ø:
10 mm
|
Manufacturer Article Number:
162010-100
|
Material:
Silicone
Transparent. Sealing caps have a slight taper and offer a very secure hold and are comfortable to use.
Variants from €3.51*
Autoclavable:
Yes
|
Depth:
120 mm
|
Dimensions (WxDxH):
150 x 120 x 32 mm
|
For vessels:
15 ml
|
Height:
32 mm
|
Manufacturer Article Number:
078.06.015B
|
Material:
PP
|
No. of positions:
25
|
UNSPSC:
41122804
|
Width:
150 mm
Suitable to hold 15 ml and 50 ml centrifuge tubes with conical bottom. Just push the tubes into the cavities and leave them. Unique design has an angular end to provide easy stacking for space saving purpose. Moulded in alpha numeric grid reference on the rack allows easy sample identification.
Variants from €16.31*
Autoclavable:
Yes
|
Colour:
Yellow
|
Depth:
300 mm
|
Dimensions (WxDxH):
112 x 300 x 85 mm
|
For vessel Ø:
30 mm
|
Height:
85 mm
|
Manufacturer Article Number:
0056806
|
Material:
PP
|
No. of positions:
24
|
UNSPSC:
41122804
|
Width:
112 mm
Will not float. Alphanumeric grid referenced on top tier for easy identification of samples. Stackable when empty. Can be used in freezers or water baths. Autoclavable at 121°C for 20 min.
Variants from €22.54*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*