Colour:
blue
|
Dimensions (W x D x H) mm:
127 x 99 x 30
|
For tubes ml:
0.2
|
Manufacturer Article Number:
HS23461C
Removable hinged lid lies flat. Perfect for pre- or post-PCR sampling. Sturdy polypropylene rack accommodates individual 0.2ml tubes or strips of 8 or 12 tubes. Tube wells are easily identified with embossed numbers and letters. Autoclavable.
Variants from €19.59*
For:
Three 50ml Tubes
|
Manufacturer Article Number:
F19900-0000
Rack suitable for all magnetic separation experiments involving affinity ligands separation of e.g. antibodies and nucleic acids.Model for 1.5 / 2.0 ml, 5 ml / 15 ml and 50 ml tubesIndependent and rotatable sleeves with powerful magnets on 50 ml and 1.5/5 mlEasy removal of liquids96-well PCR plate model has 24 magnetsFlat bottom microplate model has magnets covering entire footprint to accept all standard micro-plates with any number of wells; 6, 12, 24, 48, 96 etc.Racks fit microplates following ANSI standardsClear acrylic allows unobstructed view of tube contents
Variants from €994.50*
For tubes:
0,2 ml
|
Manufacturer Article Number:
F18837-0000
|
Material:
PC
|
Min. temperature:
-86 °C
|
No. of positions:
144
|
UNSPSC:
41123304
Designed to fit in a standard 53mm freezer rack, this 144-place PCR Tube Freezer Box will hold individual and/or strip 0.2ml PCR tubes.Designed for ULT freezer storage at temperatures down to -86°CDurable and impervious to moistureClear polycarbonate lid and base and alpha-numeric index make it easy to identify samples within the boxTwo boxes may be stacked to fit together in one space in a 53mm freezer storage rack if using flat-capped PCR tubes
Colour:
blue, green, purple, yellow, orange
|
For tubes ml:
0.2
|
Manufacturer Article Number:
HS2344A
|
UNSPSC:
41-12-28-01
Removable hinged lid fits both sides. Flip this polypropylene reversible rack to the size of tubes you need. PCR side of the rack has 168 wells that hold 0.2ml tubes. The wells accommodate 8- or 12-tube strips or individual tubes. The opposite side of the rack has 40 wells that hold 0.5ml tubes. Both sides of the rack have 12 wells for 1.5ml tubes. Dimensions (L x W x H): 206 x 131 x 54mm. Autoclavable.
Manufacturer Article Number:
CL02.2108.1000
|
Nominal capacity ml:
1000
|
Type:
Water, nuclease-free
For use in any molecular biology application. Nuclease-free water is pure, quality-tested water suitable for use in all experiments that require nuclease-free water, including molecular biology applications. Nuclease-free water is prepared in a proprietary process, which yields DNase, RNase, and nuclease-free, deionized water without the use of chemical additives, such as diethylpyrocarbonate (DEPC). Nuclease-free water is provided in nuclease-free containers.
Colour:
Blue
|
For vessels:
0,2 ml
|
Manufacturer Article Number:
089.03.012B
|
Material:
PP
|
No. of positions:
96
|
UNSPSC:
41122804
Manufactured from high density polypropylene which is fully autoclavable. Excellent rack for "before" and "after" PCR sampling.This rack can be used alone or inserted in the workstation.This working/storage rack is designed to accommodate 96 pieces 0.2 ml PCR tubes or strips of 8 and 12 tubes.Tube wells are easly identified with alphanumeric,embossed numbers and letters.Translucent clear cover protects the tubes from dust and has a non-slip surface to allow safe storage of multiple racks.Dimensions (W x D x H): 125 x 88 x 31 mm
49%
Description:
MultiSUB Mini 10
|
Manufacturer Article Number:
MSMINI10
The MultiSUB series of horizontal gel units offers the most versatile solution for DNA and RNA agarose gel electrophoresis currently available. The tanks are injection molded and therefore leak free. They are equipped with high quality platinum electrodes. Each unit comes with a variety of gel tray sizes and colour coded combs providing high flexibility for the user. The casting dams supplied with the units offer a simple and leak free solution for casting the gels.The MultiSUB Mini is the smallest unit in the range, designed for low to medium numbers of samples. The cost-effective small gel size does not compromise versatility as two tray options are available: 7 x 7 cm and 7 x 10 cm. Easy preparation up to 16 samples. Simply by altering the gel tray or comb, this compact unit is capable of resolving up to 64 different samples, prepping 1ml of sample or separating sample bands over a distance of 9 cm.Supplied with: MultiSUB Mini 7: 7 x 7 cm UV Tray, 2 x 8 sample combs.MultiSUB Mini 10: 7 x 10 cm UV Tray, 2 x 8 sample combs.MultiSUB Mini DUO: 7 x 7 cm and 7 x 10 cm UV Tray, 2 x 8 sample combs.Set: MultiSUB Mini DUO + Power supply OmniPAC, MINi 300 V 400mA 60 W, 110/230 V.Each model has an additional loading guides and dams.SpecificationsGel dimensions (W x L):7 x 7cm and 7 x 10 cmUnit dimensions (W x L x H):21 x 9 x 9 cmMax. sample capacity:7 x 7 cm tray, 32 samples
7 x 10 cm tray, 64 samplesBuffer volume:225 ml
49%
Manufacturer Article Number:
NANOPAC-300P
|
Power W:
60
|
Supply requirements:
100 ... 240 V, 50 ... 60 Hz, 2,5 A
|
Type:
nanoPAC-300P Mini
The nanoPAC-300 is capable of running all Cleaver Scientific horizontal multiSUB™ systems and vertical omniPAGE mini gel systems.Maximum constant current output of 400mASimple two step feature to set a programmable change in voltage, current and time during the runConstant voltage up to 300 VAdjustable in 1 V and 1 mA incrementsTwo parallel outputsContinuous run or timed setting up to 999 minutesAutomatic safety shutdownAlarm functionEasy-to-clean polycarbonate housing3-digit LED display
49%
Manufacturer Article Number:
PROBLUEVIEW
|
Type:
proBLUEVIEW
Powerful LED lighting arrays for blue (470 nm) and white (broad wavelength) illumination to image fluorescent and colorimetric gels. Through LED lights no ageing of UV bulbs and because of the inbuilt white LED array a separate white light table is not necessary. Well suited for teaching labs in universities and schools. Compatible with blue light excited safe DNA stains, as well as traditional stains such as ethidium bromide.Magnetic filter compatible with wide range of DNA stains3 level adjustable LED intensityBottom up illumination provides even sample illuminationAutomatic power-off to prevent heat build-upHigh quality aluminium housingScope of supply:Transilluminator, orange hinged filter, paper hoodSpecificationsWavelength:470 nm + white lightViewing size:120 x 180 mmDimensions (W x D x H):220 x 185 x 30 mmInput voltage:12 V, 2 APower supply:110 ... 240 V
Colour:
purple, blue, green, orange, yellow
|
For tubes ml:
0.2
|
Manufacturer Article Number:
HS120538
The PCR® rack base is made from robust ABS construction, and the lid is made from PC. Versatile Rack for use on a bench top or for freezer storage.Storing of tubes down to -80 °CHolds 0.2 ml individual tubes or stripsAmbidextrousDetachable lidStackable
Description:
Clear weld Seal Mark II (125 x 78mm)
|
Manufacturer Article Number:
4TI-0575-WB
Clear Polyester backed film, with non peelable seal on Polypropylene microplates.Application:Quantitative PCR, optical assays, Roche Lightcycler480, waterbath cycling.Sealing:2 to 3 sec 170 to 175°C.Seal Integrity:-80°C to 110°C
Capacity g:
50
|
Manufacturer Article Number:
CSL-LMA50
|
Type:
CSL-LMA50
This agaroses are suitable for routine analysis of nucleic acids. They combine tensile strength with low electroendoosmotic effects to achieve high resolving power for a wide size range of nucleic acid fragments. AG agaroses are also very environmentally friendly, being manufactured by a process which excludes organic solvents. Also available as low melting point agarose for nucleic acid recovery and enzymatic applications (Cat. No. 4.658 455) and as High Resolution PCR grade agarose for separation of small DNA fragments of up to 800 bp (Cat. No. 6.270 615). Other packing sizes on request.SpecificationsAG | LMA | HRACAS:
Appearance:9012-36-6 | 39346-81-1 | 39346-81-1
White to off-white powderEEO:≤ 0,13 % | ≤ 0,1 % | ≤ 0,1%Gelling Point:36 °C ±1,5°C (1,5 % gel) | 26-30 °C (1,5 % gel) | ≤ 33 °C (1,5 % gel)Melting Point:88 °C ±1,5°C (1,5 % gel) | ≤ 65 °C (1,5 % gel) | ≤ 70 °C (1,5 % gel)Solubility:Clear, colourless solution at 1g in 100ml waterMoisture: 10 %Gel Strength:≥ 1200 g/cm2 (1% gel) | ≥ 200 g/cm² (1% gel) | ≥ 750 g/cm² (1,5% gel)Sulphate: 0,20 % | ≤ 0,1 % | ≤ 0,1 %DNase, RNase, Protease, Endonuclease:None Detected
Variants from €10.44*
Manufacturer Article Number:
IB47105
|
Type:
MINI Hi-Speed Plasmid Columns
Spin column system consisting of filter tubes with glass fibre filter and collection tubes. For the use of leftover reagents from IBI I-Blue MINI Plasmidpurification-Kits (IB47170, IB47171, IB47172), Gel / PCR / DNA Fragment Extraction Kits (IB47010, IB47020, IB47030), Plasmidpurification-Kits High-Speed MINI (IB47101, IB47102) or similar products from other suppliers using a binding, washing and elution method. Sample size, binding capacity and elution volume listed in the specifications must be observed.SpecificationsGel Fragment Extraction Kit // Plasmidpurification-KitsSample size:300 mg agarose gel / 100 µl PCR product // 1 - 4 ml bacterial cultureBinding capacity:up to 10 µg // up to 30 µgElution volume:20 - 50 µl // 50 - 100 µl
Variants from €67.16*
Manufacturer Article Number:
3-321-20-0
|
Material Filter:
GF-N2
|
Volume ml:
2.0
Each spin column contains 2 filters and is either recommended for purification of DNA (GF-F2) or RNA (GF-N2). The system consisting of 0.8 ml filter tube and 1.5 ml or 2.0 ml receiver tube.Recommended for purificationPrefiltering of dirty solutionsRapid flow rateHigh particle loading capacity
Description:
Gravity flow
|
For:
25 preps
|
Manufacturer Article Number:
IB47181
|
Type:
I-Blue MIDI
For rapid and efficient extraction of plasmid DNA from bacterial cells.The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer. The test kit contains the I-Blue Lysis Buffer, an optional colour indicator. The use of this indicator prevents common handling errors that impair efficient cell lysis and neutralization.Fast extraction timeHigh yieldPrevention of handling errors during cell lysis and neutralisation by I-Blue colour indicatorSpecificationsI-Blue Mini Plasmid Kit // I-Blue Midi Plasmid KitMethod:Spin column // Anion-ExchangeSample size:1 - 7 ml // 50 - 100 ml high-copy plasmid / 100 - 150 ml low-copy plasmidBinding capacity:50 µg // 500 µgFragment size:1 - 15 kb // 1 - 20 kbTypical yield:up to 50 µg // 200 - 500 µgOperation Time:15 min. // 80 min.
Variants from €36.23*
For:
100 preps
|
Manufacturer Article Number:
IB47020
The test kit was developed to obtain or concentrate DNA fragments from agarose gels, PCR or other enzymatic processes.The agarose gel is dissolved, the enzymes are denatured and the DNA fragments will bind to the glass fibre matrix in the spin column. Wash buffers (containing ethanol) are used to remove contaminants and a low salt elution buffer is used to recover the purified DNA fragments. Recoveries are 90 - 95 % for PCR clean-up. With this kit, PCR purification and gel extraction procedures can be performed, so that a second test kit is not necessary.High recovery rateShort process timeOne test kit for two methodsSpecificationsSample size:up to 300 mg of agarose gel / up to 100 µl of PCR productBinding capacity:10 µg DNAFragment size:10 kbTypical yield:80-90% gel extraction / 90-95% PCR clean-upOperation Time:20 min.
Variants from €36.23*
Autoclavable:
Yes
|
Colour:
Transparent
|
Manufacturer Article Number:
781334
|
Material:
PP
|
Shape (PCR tube lids):
Flat
|
UNSPSC:
41-12-17-04
With PCR cap strips you can seal PCR strips and plates reliably and protect your samples effectively against evaporation and contamination. Free from RNase-, DNase- and DNA.
Variants from €30.10*
Manufacturer Article Number:
IB47115
|
Type:
MIDI Plasmid Columns
For the use of leftover reagents from IBI I-Blue MIDI Plasmid purification-Kits (IB47181), Plasmid purification-Kits MIDI Fast Ion (IB47111), Plasmid purification-Kits Maxi Fast Ion (IB47122), Plasmid purification-Kits Maxi Fast Ion, endotoxin-free (IB47125) or similar products from other suppliers using a binding, washing and elution method. Sample size and elution volume listed in the specifications must be observed.SpecificationsMIDI // MAXISample size:50 ml for high copy and 100 ml for low copy // 100 ml for high copy and 250 ml for low copyYield:up to 250 µg // up to 500 µgElution volume:8 ml // 12 mlOperation time:120 min. // 150 min.
Variants from €157.64*
Description:
Gravity flow
|
For:
25 preps
|
Manufacturer Article Number:
IB47111
|
Type:
MIDI Fast Ion
For rapid and efficient extraction of plasmid DNA from bacterial cells.The method is based on a combination of alkaline lysis and RNase treatment to obtain a clear lysate with minimal genomic DNA and RNA contamination. The bound plasmid DNA is washed and finally eluted by adding a buffer.SpecificationsMini Kit // Midi KitMethod:Spin column // Anion-ExchangeSample size:1 - 5 ml // 50 ml high-copy plasmid / 100 ml low-copy plasmidBinding capacity:30 µg // 800 µgFragment size:1 - 15 kb // 1 - 20 kbTypical yield:10- 30 µg // 200 - 800 µgOperation Time:15 min. // 120 min.
Variants from €235.20*
Depth int.:
390 mm
|
Description:
UV sterilisation cabinets Midi with timer, four UV lights and white light
|
Ext. depth:
420
|
Ext. height:
620 mm
|
Ext. width:
580 mm
|
External dimensions (WxDxH):
580 x 420 x 620 mm
|
Height int.:
425 mm
|
Int. width:
530 mm
|
Internal dimensions (WxDxH):
530 x 390 x 425 mm
|
Manufacturer Article Number:
CSL-UVCABMIDI
|
Max. voltage:
230 V
|
Power supply:
230 V
|
Type:
MIDI
|
UNSPSC:
41103517
|
Weight:
14.6 kg
These UV sterilisation cabinets provide a convenient area for setting up PCR reactions in a nucleic acid free environment thus limiting PCR reaction contamination. Acting effectively as a low cost alternative to a Cleanroom, the powerful UV lights on the cabinets denature nucleic acids in 5 to 30 minutes making them unsuitable for amplification. The cabinet incorporates safety features to prevent user exposure to UV light. The UV lights themselves are timer controlled and there are safety switches on the cabinets doors which turn off the UV lights when opened. Constructed from 10 mm acrylic, the cabinets also act as efficient shields from beta radiation emissions and can therefore be safely used with isotopes such as 32P.UV Lights 4 x 15 WattWhite Light 15 Watt
Variants from €2,584.99*
Description:
Compact Gel documentation system
|
Manufacturer Article Number:
CSL-MICRODOC
|
UNSPSC:
41-10-53-00
Recently upgraded with a new 24.1 megapixel digital CMOS camera to guarantee superb resolution, the microDOC is the researcher's choice for a simple ultra-compact gel documentation system that meets constraints in both budget and space within the laboratory. A large 8" TFT screen enables images, including agarose and fluorescent gels, colorimetric gels, autoradiography film and blotting membrane, to be captured clearly and easily. The system is computer-free and supplied with an 8 GB storage card and 58 mm ethidium bromide filter as standard, while an optional SYBR filter is also available. Files are saved onto the storage card in RAW, TIFF-RGB and JPEG formats and may be transferred to computer for analysis with the highly recommended TotalLab™ 1D software.microDOC BASIC: The microDOC BASIC is a simple low-cost system comprising a lift-off dark room hood and 24.1 megapixel digital camera, through which the gel is viewed directly. This system can be supplied with optional TotalLab™ 1D Analysis Software and any one of the 21 x 21cm transilluminators (please enquire).TotalLab™ 1D software: is supplied only as part of a complete package with each of the microDOC and transilluminator options. Its main functions include: lane creation, background subtraction, band detection, profile deconvolution, and molecular size, pI and quantity calibration. More sophisticated standalone software options are available for 1D applications that require band matching, array, colony counting and image ToolBox functionalities.Camera:File Format Design rule for Camera File system, DPOF (version 1.1) compliantFocus-Area Selection AF mode and manual focus are availableHoodMulti-Power Source for camera, Inner light lamp, TFT screen (excludes MicroDOC Basic/1D models)Safety Door Switch Automatically disconnects UV transilluminator, while opening the chamber door during operationwith Video and Audio InputSpecifications Camera:Effective Pixels:
Type:24.1 megapixels
TTL-CT-SIR with CMOS sensorLens:Canon EF/EF-S 18-55 mmMaximum Aperture:f/2.8 - f/5.6Image Resolution:720 × 480 up to 5,184 × 3,456Data Type Still images:Exif 2.3 (JPEG), RAW (CR2)Movies:MOV (Image data: H264 ; Audio data: Linear PCM (stereo))Filter:
Inner White Light:Ethidium Bromide or SYBR Green (58 mm)
2 x 3 W white light LED (excl. MDOC Basic Models)Monitor:
Display Format:
Luminance:8" TFT liquid crystal screen
960 x 234 mm
300 cd/m2Display Mode:NTSC/PAL mode switchableDimensions with camera (W x D x H):290 x 325 x 515 mmRated Voltages:
Weight approx.:110 - 220 V
7.7 kg* incl.Analysis Software TotalLab1D.
Variants from €2,945.25*
Manufacturer Article Number:
GELPRO-302E
|
Type:
gelPRO-302E
An entry level system for routine fluorescence and gel documentation. Suitable for DNA gels, protein gels, colony counting, colorimetric blots and films. Spacious darkroom for viewing gels up to 25 x 30 cm. Internal lighting comes from a UV transilluminator or a white or blue light LED module. This system can be upgraded to a chemiluminescence imager.High resolution 5 MP camera for good spatial resolutionEffective resolution up to 15.1 MPMotor driven zoom lens and filter wheelIntegral white LED lighting for sample positioning, visible light applications and colorimetric markersPre-defined 1-click protocols for rapid imagingGenepix automatic control softwareUnlimited user saveable protocolsCan be used in a 21 cfr part 11 compliant environmentScope of supply:Darkroom, camera, UV transilluminator, UV emission filter, license free acquisition and analysis softwareSpecificationsResolution:5 megapixelsEffective resolution:15.1 megapixelsLens:Zoom, f1.2 with lens feedbackSensor bit-depth:12/16 bitGreyscales:65536Dynamic range:4.8Transilluminator wavelength:302 nmTransilluminator size:250 x 300 mmDimensions (W x D x H):570 x 450 x 840 mmWeight:37 kgPower supply:230 V/50 Hz
Manufacturer Article Number:
GELLITE
|
Type:
gelLITE
Compact gel documentation system for agarose gels and stained protein gels. Suitable for fluorescent and stained agarose gels, spot and colony counting, Coomassie stained protein gels, GFP plant imaging, molecular weight analysis of DNA agarose gels and protein gels as well as autoradiography imaging. A 302 nm UV transilluminator enables imaging of large format agarose gels or stained protein gels up to 20 x 20 cm. A 5-megapixel camera gives low light sensitivity for clear resolution of closely spaced DNA bands and ensures low levels of fluorescence are detected. With intuitive genePIX acquisition software for an efficient workflow.High-resolution 5 megapixel camera with 16 bit image depth and 65536 grey levelsManually controlled camera zoom and focusImage of all commercially available DNA and protein stainsGenepix software for acquisition and analysisUSB connection to PCScope of supply:Darkroom, camera, UV transilluminator, UV emission filter, license free acquisition and analysis softwareSpecificationsResolution:5 megapixelsLens:Manual zoom 6.5 - 39, F1.4Sensor bit-depth:12/16 bitGreyscales:4096 / 65536Transilluminator wavelength:302 nmTransilluminator size:200 x 200 mmDimensions (H x D x W):620 x 375 x 400 mmPower supply:230 V / 60 Hz
Description:
Gel Documentation Workflow Kit gelONE
|
Manufacturer Article Number:
GELONEPACK
The all-in-one package for agarose gel electrophoresis. It includes everything necessary from gel loading to gel documentation and quantification.Gel documentation system gelONE with built-in touch screen and 5 megapixel camera for clear imaging of closely spaced DNA bands. Acquisition and analysis software is already included licence-freeElectrophoresis tank multiSUB Choice has an optimal size for routine separations. The tank is injection-moulded and each platinum electrode is recessed in a removable cassette to protect it from damagePower supply PowerPro can be operated in constant mode or programmed. Stores preset protocols for each Cleaver Scientific gel tankScope of supply: Gel documentation system gelONE, electrophoresis tank multiSUB Choice Trio, power supply PowerPro 300, UV to blue light converter (21 x 26 cm), UV fluorescent ruler, UV gel scoop, agarose (100 g), DNA ladder (100 bp to 10 Kb), DNA staining reagent runSAFE (50 bp to 20 Kb), TAE running buffer (1 l)