Quick delivery
CertoClav Sterilizer GmbH
Tabletop autoclaves CertoClav MultiControl | Type: MultiControl
Article number: 9842018
Product information "Tabletop autoclaves CertoClav MultiControl | Type: MultiControl"
Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.
All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
The PT100 sensor-controlled, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST test, pressure vessel test und ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. Basic version of PC software for data monitoring is included. With this software, you can only set single-step programs. For multi-step programs, PC software professional version is required.
Scope of suppy: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller
All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
- Programmable from 1 minute to 30 days and from room temperature to 140 °C
- Automated process control and error detection
- USB port
- Printer port (RS232) for printing sterilisation protocols
Scope of suppy: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller
| Specifications | |
| Chamber diameter: | 240 mm |
| Chamber depth: | 260 mm |
| Air evacuation: | Fractional flow procedure |
| Chamber material: | Aluminium |
| Operating pressure: | 2,7 bar |
| Heating capacity: | 1900 W |
| Power supply: | 230 V ±10 % / 50 - 60 Hz |
| Capacity l: | 12 |
|---|---|
| Type: | MultiControl |
| Weight kg: | 6.6 |
| Working Temp. range °C: | 20 ... 140 |
Accessories
Accessories for Autoclaves, CertoClav
Service kit 1: with lid gasket, valve gasket, gasket for exhaust cock and manometer, steam valveService kit 2: with lid gasket, control valve gasket, seals for exhaust cock and pressure gauge, steam valve and safety valveService kit 3: with door gasket, safety valve and bacteria filter
€18.00*
Other customers also bought
Tabletop autoclaves CertoClav EL
Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.The vertical laboratory autoclave with valve control is suitable for sterilisation of unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials, food preservation, culture media preparation and waste. A precision manometer with drag pointer and a precision thermometer ensure that operations and processes are precise. This autoclave is available in two versions, each with two temperature levels. Pressure control via valve, temperature control via thermostat. Pressure valves are not interchangeable, because the thermostat of the device is perfectly adapted and calibrated to the valve.Scope of supply: Autoclave, stable instrument panel with 3 feeds, minimum water level indicator, power cableSpecificationsEL 12 // EL 18Chamber diameter:240 mmChamber depth:260 // 390 mmAir evacuation:Free steam flow processChamber material:AluminiumOperating pressure:2.7 barHeating capacity:1900 WPower supply:230 V ±10 % / 50 - 60 Hz
€2,510.00*