Vacuubrand GmbH & Co.KG

Chemistry Pumping Units VARIO® select | Type: PC 3004 VARIO® select

Article number: 6275104

€7,670.00*

Packaging unit: 1 piece

on order

Flow rate (50/60Hz) L / min.
Plug type
Type
Ultimate vacuum without / with gas ballast mbar
Product information "Chemistry Pumping Units VARIO® select | Type: PC 3004 VARIO® select"
The combination of speed controlled VARIO® chemistry diaphragm pumps and the new VACUU·SELECT vacuum controller makes the VARIO® select chemistry pumps the ideal solution for chemical processes that require precise vacuum, such as rotary evaporation, vacuum drying or vacuum concentration.
  • High chemical resistance and therefore ideally suited for pumping aggressive gases and vapours.

  • Short process times and smooth running due to optimal setting of the pressure via the VACUU·SELECT controller.

  • The VARIO® technology controls the vacuum precisely and efficiently via motor speed.

  • Power consumption, maintenance and noise are exceptionally low.

  • The outlet catchpot and solvent condenser combine to prevent solvent vapor emissions into the lab, allowing for nearly full recovery of solvents.


Country-specific power cord versions available on request.
Dimensions (W x D x H) mm: 243 x 419 x 457
Flow rate (50/60Hz) L / min.: 76.67
Plug type: CH
Type: PC 3004 VARIO® select
Ultimate vacuum without / with gas ballast mbar: 1.5 / 3
Weight kg: 21.1

Other customers also bought

Chemistry Pump Units and Vacuum Systems
Compact design, ready to use, no set-up required. Constructed in chemically resistant materials. Quiet operation.100% oil-free pumping of gasesgas ballast as standard for working with condensable vapoursgood vacuum even with gas ballasthigh vapour tolerance for water and solventslong service life, low maintenanceFeatures:2AK: Inlet and outlet separatorAK + EK: Inlet separator, exhaust vapour condenserPC 510 select (two-stage) / 610 select (three-stage) : with AK + EK; 1 electronically controlled vacuum portPC 511 select (two-stage) / 611 select (three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum portPC 520 select (two-stage) / 620 select (three-stage) : with AK + EK; 2 electronically controlled vacuum portsCharacteristics and applications: Without vacuum control: MZ 2C NT +2AK: e.g. filtration, distillation without condensation at the outletMZ 2C NT +AK+EK: Well-proven unit for a wide range of applications for a single-user, e.g. gel drying, distillation, vacuum concentrator. For solvents with medium to low volatility.MD 1C +AK+EK: Space-saving single-user configuration. For high-boiling-point solvents.MD 4C NT + AK+EK: Larger or multi-user applications, the local vacuum network VACUU·LAN®. For high-boiling solvents.MV 10C NT +EK: Four-stage diaphragm pump with exhaust vapour condenser. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.With vacuum controller: PC 510 select / 511 select: Well-proven units for a wide range of processes in chemistry laboratories, e.g. all common solvents. PC 511 select with addtional manually controlled vacuum port.PC 610 select / 611 select: Proven solution for supporting electronically controlled evaporation or drying processes even with many high boiling point solvents. PC 611 select with additional manually controlled vacuum port.PC 520 select / 620 select: Compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump.Country-specific power cord versions available on request.
€2,860.00*
Chemistry Pumping Unit PC 3001 VARIO® select with condenser Peltronic®
The PC 3001 VARIO® select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. This pump is suitable for even high boiling point solvents. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The pump's variable motor speed responds to demand, reducing energy waste and mechanical wear, ensuring unrivalled service life for the diaphragms.For solvent evaporation, the controller detects solvent boiling and automatically adjusts the pump's motor speed to maintain process controlUser-defined applications with simple drag-and-drop editing.Small footprint and low weight for flexible use in the laboratoryThe inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pumpThe included emission condenser Peltronic® works without any cooling media like water or dry ice.Scope of supply: Chemistry pumping unit PC 3001 VARIO® select completely mounted with conderser Peltronic®, ready for use, with manual.Without mains cable, please order separately.SpecificationsCooling power at 21 °C:50 WAmbient temperature range:10 ... 40 °CPreset cooling temperature:10 °CMaterials in contact with media:PP, PFA, ETFE/ECTFE, borosilicate glassPower supply:100 ... 230 V, 50/60 HzDimensions (W x D x H):175 x 179 x 392 mm
€7,620.00*