Removes dust and dirt from shoe soles in different adhesive levels with a thickness of 35 µm per layer.If the top adhesive mat is soiled, you can simply remove this layer and work directly on the next one of the stack. The number of remaining mats on the stack is indicated by the number in the corner.1 carton with 10 mats, 30 layers or 1 carton with 6 mats, 60 layers
Sterilisized with gamma raysClean package, cleaned with ultrapure water (case) with 1 carton with 2 x 5 pieces
Sterilisized with gamma raysClean package, cleaned with ultrapure water (case) with 1 carton with 2 x 5 pieces
Sterilisized with gamma rays
Hangers with name tagsHooks for hanging masks and gloves
To be attached to air shower wall.30 layersWith count-down tag per layerWater-soluble adhesive
Sterilisized with gamma rays
Removes dust and dirt from shoe soles.Adhesiveness can be restored by wiping with waterAntibacterialWhipeable
Sit-Over-Bank bestehend aus Sitzfläche, Schuhablagefächern und Sockel.Material Edelstahl (1.4301/AISI 304)Funktionsoberflächen in KEK-Finish3 reihige Anordnung der Schuhfächer
Cleanroom racks consisting of base frame and welded in shelves.Material stainless steel (1.4301 / AISI 304)Functional surfaces in KEK-FinishBase frame made of square tubeupper ends closed with plastic capsFloor leveling with disc feets made of CNS (+/- 10 mm)Shelves, folded on all sidesfirmly weldedsmooth surfacefor perforated version: Dimension punching ø 10 mm in 15 x 15 mm grid to support the laminar flow of airdepending on design and dimensions stabilized by reinforcement
Wardrobe consisting of a base frame and coat hangersMaterial stainless steel (1.4301 / AISI 304)Firmly welded hangersBase frame made of square tubeCrossbar for stabilizationSquare profiles with plastic caps (black) closed at the topFloor leveling with disc feet made of CNS (+/- 10 mm)Variants with 9, 12, 15 coat hangers
Sit-Over-Bench consisting of seating area, compartments for shoes and plinthMaterial: AISI 304Working surfaces: KEK-FinishSingle sided version with rear panel or double sided versionShoe boxes in three rows
Reinraumarbeitstisch bestehend aus Tischplatte und UntergestellMaterial Edelstahl (1.4301/AISI 304)Tischplatte aus 1,5 mm dicken Edelstahl allseitig 42 mm abgekantet, davon 12 mm 15° nach innen gekantet Funktionsoberflächen in KEK-Finish, Maßlochung (ø10 mm im Raster 15 x 15 mm) zur Unterstützung der laminaren Luftströmung glatte Oberfläche je nach Ausführung und Abmessung durch Verstärkung stabilisiertGrundgestell aus VierkantrohrGrundboden mit gelochter Oberfläche Maßlochung (ø10 mm im Raster 15 x 15 mm) fest eingeschweißtFußbodenausgleich mit Tellerfüßen aus CNS (+/-10 mm)
Material Edelstahl (1.4301/AISI 304)Funktionsoberflächen in KEK-FinishBöden mit Maßlochung (ø 10 mm im Raster 15 x 15 mm)Fest eingeschweißtJe nach Ausführung und Abmessung durch Verstärkung stabilisiertVierkantprofile oben mit Kunststoffkappe geschlossen4 Lenkrollen elektrisch leitfähig, davon 2 feststellbar
Reinraumarbeitstisch bestehend aus Tischplatte und Untergestell.Material Edelstahl (1.4301/AISI 304)Tischplatte aus 1,5 mm dicken Edelstahl allseitig 42 mm abgekantet, davon 12 mm 15° nach innen gekantet Funktionsoberflächen in KEK-Finish glatte Oberfläche je nach Ausführung und Abmessung durch Verstärkung stabilisiertGrundgestell aus VierkantrohrGrundboden mit glatter Oberfläche fest eingeschweißtFußbodenausgleich mit Tellerfüßen aus CNS (+/-10 mm)
Clean room worktable consisting of worktop and underframeMaterial stainless steel (1.4301 / AISI 304)Table top made of 1.5 mm thick stainless steel42 mm bevelled on all sides, 12 mm of which 15 ° after folded inside Functional surfaces in KEK-Finish smooth surface depending on design and dimensions stabilized by reinforcementBase frame made of square tubesGround floor with smooth surface firmly weldedFloor leveling
Material stainless steel (1.4301 / AISI 304)Functional surfaces in KEK-FinishShelves with a smooth surface or shelves with punched holes (ø 10 mm in 15 x 15 mm grid) to support the laminar flow of airFirmly weldedStabilized by reinforcement depending on design and dimensionsSquare profiles closed at the top with plastic caps4 castors electrically conductive, 2 of them lockable
Sit-Over-Bench consisting of seating area and base frame with single walled, angular welded in shoe shelvesMaterial: AISI 304Working surfaces: KEK-FinishDouble sided versionStorage place for 3 pairs of shoes each sideBase frame made of square tubesAdjustable feets (+ 10 mm)
Clean room worktable consisting of worktop and underframeMaterial stainless steel (1.4301 / AISI 304)Table top made of 1.5 mm thick stainless steel 42 mm bevelled on all sides, 12 mm of which 15 ° after folded inside Functional surfaces in KEK-Finish Dimension punching (ø10 mm in the grid 15 x 15 mm) to support the laminar flow of air depending on design and dimensions stabilized by reinforcementBase frame made of square tubesGround floor with perforated surface dimension punching (ø10 mm in the grid 15 x 15 mm) firmly weldedFloor leveling
Wardrobe consisting of a base frame and coat hangersMaterial stainless steel (1.4301 / AISI 304)Firmly welded hangersBase frame made of square tubeSquare profiles with plastic caps (black) closedPrepared for on-site wall mounting4 with plastic caps (black) closed mounting holesWithout fastening materialVariants with 7, 8, 9, 10, 11 coat hangers
Material stainless steel (1.4301 / AISI 304)Functional surfaces in KEK-FinishTo dispense ofdisposable items (hoods, gloves, etc.)1 - 4 boxesHinged lid with bow handle for fillingViewing slots on the front to monitor the filling levelEmbossed removal openingRemovable drip tray arranged under the removal opening2 mounting holes on the back for wall mounting
Reinraumarbeitstisch bestehend aus Tischplatte und UntergestellMaterial Edelstahl (1.4301/AISI 304)Tischplatte aus 1,5 mm dicken Edelstahl allseitig 42 mm abgekantet, davon 12 mm 15° nach innen gekantet Funktionsoberflächen in KEK-Finish, Maßlochung (ø10 mm im Raster 15 x 15 mm) zur Unterstützung der laminaren Luftströmung glatte Oberfläche je nach Ausführung und Abmessung durch Verstärkung stabilisiertGrundgestell aus VierkantrohrFußbodenausgleich mit Tellerfüßen aus CNS (+/-10 mm)Höhenverstellung:Hublänge 300 mm (im Bereich von 750 mm bis 1.050 mm)Hubgeschwindigkeit ca. 9 mm/s;mit Digitalanzeige und Memory-Funktion für bis zu 3 eingespeicherte HöhenTechnikfach mit Edelstahl vollverblendet und an das Gestell befestigt montiert und reversibel geschlossenNetzanschluss für EU- Stecker
Reinraumarbeitstisch bestehend aus Tischplatte und Untergestell.Material Edelstahl (1.4301/AISI 304)Tischplatte aus 1,5 mm dicken Edelstahl allseitig 42 mm abgekantet, davon 12 mm 15° nach innen gekantet Funktionsoberflächen in KEK-Finish glatte Oberfläche je nach Ausführung und Abmessung durch Verstärkung stabilisiertGrundgestell aus VierkantrohrFußbodenausgleich mit Tellerfüßen aus CNS (+/-10 mm)Höhenverstellung:Hublänge 300 mm (im Bereich von 750 mm bis 1.050 mm)Hubgeschwindigkeit ca. 9 mm/s;mit Digitalanzeige und Memory-Funktion für bis zu 3 eingespeicherte HöhenTechnikfach mit Edelstahl vollverblendet und an das Gestell befestigt montiert und reversibel geschlossenNetzanschluss für EU- Stecker
Material stainless steel (1.4301 / AISI 304)Functional surfaces in KEK-FinishTo dispense ofdisposable items (hoods, gloves, etc.)1 - 4 boxesHinged lid with bow handle for fillingViewing slots on the front to monitor the filling levelEmbossed removal openingRemovable drip tray arranged under the removal opening2 mounting holes on the back for wall mounting
Promotion
DIN 12336Flat-bottom with spoutAutoclavable
DIN 12336Flat-bottom with spout
Glazed inside and outside except for rim.
Promotion
DIN 12336Flat-bottom with spoutAutoclavable
DIN 12336Flat-bottom with spout
Glazed inside and outside except for rim.