Quick delivery
Division:
0.5 %
|
Manufacturer Article Number:
0884
|
Max. measured value:
35 %
|
Measured range:
0 ... 35 %
|
Min. measured value:
0 %
|
Reference temperature:
20 °C
|
UNSPSC:
41-10-33-12
|
With thermometer:
No
Ohne Thermometer.Ohne Thermometer.
Division:
0.001 g/cm³
|
Dual Use:
0
|
Length:
300 mm
|
Manufacturer Article Number:
3031013/04/3P
|
Max. measured value:
1.900 g/cm³
|
Measured range:
1.800 ... 1.900 g/cm³
|
Min. measured value:
1.800 g/cm³
|
Reference temperature:
20 °C
Dichte-Aräometer mit einer Fehlergrenze von ±0,001 g/cm3. In 4-kant Kunststoffhülse verpackt.
Variants from €204.76*
Length:
350 mm
|
Manufacturer Article Number:
0874
|
Reference temperature:
20 °C
|
Standard:
DIN 18123
|
UNSPSC:
41-10-33-12
|
With thermometer:
No
Bezugsthemperatur 20°C. Ohne Thermometer.Bezugsthemperatur 20°C. Ohne Thermometer.
Division:
0.001 g/cm³
|
Length:
300 mm
|
Manufacturer Article Number:
3031008/03/3P
|
Max. measured value:
1.400 g/cm³
|
Measured range:
1.300 ... 1.400 g/cm³
|
Min. measured value:
1.300 g/cm³
|
Reference temperature:
20 °C
|
UNSPSC:
41-11-30-24
Dichte-Aräometer mit einer Fehlergrenze von ±0,001 g/cm3. In 4-kant Kunststoffhülse verpackt.
Variants from €90.30*
Accuracy:
±0.0001 g/cm3
|
Accuracy temperature:
±0.05 °C
|
Accuracy temperature Number:
0.05 °C
|
Depth:
290 mm
|
Dimensions (WxDxH):
430 x 290 x 300 mm
|
Dual Use:
0
|
Height:
300 mm
|
Manufacturer Article Number:
43-40
|
Max. temperature:
95 °C
|
Max. voltage:
265 V·AC
|
Measuring range:
0 ... 3 g/cm3
|
Min. temperature:
10 °C
|
Min. voltage:
90 V·AC
|
Power supply:
90 ... 265 V·AC, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Resolution:
0.0001 g/cm3
|
Sample volume ml:
2
|
Temperature:
10 ... 95 °C
|
Type:
DSG40
|
Type of auxiliary energy:
Mains connection
|
Weight:
9.1 kg
|
Width:
430 mm
Precise measuring device for determining the density of liquids for use in laboratories and factories with high sample throughput.Measurement according to the oscillating U-tube principle7" colour touchscreen and intuitive user interfaceMenu structure with method system simplifies the performance of routine analysesMethods: Density, relative density, sucrose %w/w (°Brix), ethanol (%w/w, %v/v), customised scalesStandard Luer connections for sample applicationPeltier temperature control for rapid temperature stabilizationPowerful air pump for thorough cleaningData memory for over 100000 readingsUSB, LAN, and serial interfaceCompatible with FDA regulation 21 CFR Part 11Detailed test protocols (audit trail)
Division:
0.001 g/cm³
|
Length:
90 mm
|
Manufacturer Article Number:
0908
|
Max. measured value:
1.030 g/cm³
|
Measured range:
1.000 ... 1.030 g/cm³
|
Min. measured value:
1.000 g/cm³
Bezugsthemperatur 20°C. Ohne Thermometer.Bezugsthemperatur 20°C. Ohne Thermometer.
Division:
0.001 g/cm³
|
Length:
300 mm
|
Manufacturer Article Number:
H801090
|
Max. measured value:
2.000 g/cm³
|
Measured range:
0.600 ... 2.000 g/cm³
|
Min. measured value:
0.600 g/cm³
|
Reference temperature:
20 °C
|
UNSPSC:
41-11-30-24
|
With thermometer:
No
Messbereichsspanne 0,100 g/cm³, Papierskala, schrotbeschwerter Körper, Aräometergenauigkeit: ±1 Skalenteilungswert, in transparenter Plastikhülse. Ablesung unten.LieferumfangKompletter Satz mit 14 Insturmenten im Etui.
Division:
1
|
Manufacturer Article Number:
0896
|
Max. measured value:
95 %
|
Measured range:
45 ... 95 %
|
Min. measured value:
45 %
|
Reference temperature:
15 °C
|
UNSPSC:
41-11-30-24
|
With thermometer:
No
Without thermometer.
Division:
0.001 g/cm³
|
Length:
300 mm
|
Manufacturer Article Number:
H801058
|
Max. measured value:
1.100 g/cm³
|
Measured range:
1.000 ... 1.100 g/cm³
|
Min. measured value:
1.000 g/cm³
|
Reference temperature:
20 °C
|
UNSPSC:
41-11-30-24
|
With thermometer:
No
Scale 0,100 g/cm³, paper scale, shot weighted body, hydrometer accuracy ±1 scale division, in transparent plastic case. Reading below.* Complete set with 14 insturments in stuffed case.
Variants from €11.09*
Dual Use:
0
|
Ground size:
NS10/19
|
Manufacturer Article Number:
43305
|
Material:
Boro 3.3
|
Nominal capacity:
5 ml
|
Reference temperature:
20 °C
|
Standard:
DIN ISO 3507
|
Type of construction (Pycnometers):
Acc. to Gay-Lussac
DIN ISO 3507, gay-lussac type. Including individual certificate. Adjusted. Reference temperature 20°C.With NS10/19 capillary stopper. Stopper top ground and polished. Inscription in highly contrasting blue enamel. The volume in cm³ is specified to a precision of 3 decimal places. Calibrated to contain. Every pycnometer is calibrated with its own stopper; hence, stoppers are not interchangeable. Each bottle and its stopper is marked with an unique matching identification number.
Dual Use:
0
|
Manufacturer Article Number:
186376
|
Type:
DMA 501
Density meter for measuring of chemicals, pharmaceuticals, cosmetics and food. Suitable for samples with difficult properties like paste, inhomogeneous, sedimenting and particulate samples or aerosol sprays.The DMA 501 contains all relevant concentration tables and formulas for calculating product specific parameters and the results are displayed in the appropriate unit. Automatic filling and measuring with the optional available industrial peristaltic pump possible.Camera image of the measuring cell (U-view™) for viewing the correct sample filling, whereby potential filling errors due to inhomogeneous samples, gas bubbles or paticles are automatically detected with the FillingCheck™ functionSplash-proof frontFanless temperature control of the sampleUser-defined layouts of the measurement display with result outputs for individual requirementsDocumentation and traceability of dataElimination of external influences through the implementation of a standardised sample handlingIntegrated temperature and humidity sensorIntegrated pressure sensor for adjustmentAutomatic full-range viscosity correction of results3 years warrantySpecificationsDensity measuring range / Accuracy:0 ... 3 g/cm³ / 0.001 g/cm³Reproducibility standard deviation (acc. to ISO 5725):0.0004 g/cm³Minimal sample volume:approx. 1 mlTemperature range / Accuracy:15 ... 40 °C / 0.3 °CDisplay:7 inches, TFT WVGA (800 x 480 Px), PCAP touchscreenInterfaces:1 x Ethernet, 3 x USB, 1 x RS-232Dimensions (W x D x H):265 x 375 x 180 mmWeight:13,5 kgPower supply:100 .. 240 V, 47/63 Hz, 24 V, 3 A
Division:
0.002 g/cm³
|
Length:
280 mm
|
Manufacturer Article Number:
0112
|
Max. measured value:
0.800 g/cm³
|
Measured range:
0.600 ... 0.800 g/cm³
|
Min. measured value:
0.600 g/cm³
|
Reference temperature:
20 °C
|
UNSPSC:
41-10-33-12
|
With thermometer:
No
Shot poised. Without thermometer. Reference temperature: +20°C.Further models availlable on request.
Manufacturer Article Number:
023.01.005
|
Material:
Boro 3.3
|
Nominal capacity:
5 ml
|
Standard:
ISO 3507
For easy differentiation both the body and the stopper carries the same identification code number. Nominal volume and inscriptions are printed with blue enamel. Manufactured according to ISO 3507 standard.
Variants from €24.10*
Division:
0.001 g/cm³
|
Length:
160 mm
|
Manufacturer Article Number:
0001
|
Max. measured value:
0.660 g/cm³
|
Measured range:
0.600 ... 0.660 g/cm³
|
Min. measured value:
0.600 g/cm³
|
Reference temperature:
20 °C
|
UNSPSC:
41-10-33-12
|
With thermometer:
No
Shot poised. Without thermometer. Reference temperature: +20°C.Further models availlable on request.
Calibratable:
Yes
|
Division:
0.002 g/cm³
|
Length:
250 mm
|
Manufacturer Article Number:
0343
|
Max. measured value:
0.700 g/cm³
|
Measured range:
0.600 ... 0.700 g/cm³
|
Min. measured value:
0.600 g/cm³
|
Reference temperature:
20 °C
|
Standard:
DIN 12791
|
UNSPSC:
41-10-33-12
|
With thermometer:
No
DIN 12791 (and BS718). M100 series. Shot poised.Without thermometer. Reference temperature: +20 °C.Further models availlable on request.
Adjustment:
Yes
|
Manufacturer Article Number:
023.02.005
|
Material:
Boro 3.3
|
Nominal capacity:
5 ml
|
Standard:
ISO 3507
ISO 3507. Individually calibrated to contain (In) to 0.001ml. Net volume capacity is engraved on the body. Each bottle is calibrated together with its stopper. In order to differentiate easily, both the body and the stopper have the same code numbers printed on themselves.
Calibratable:
Yes
|
Division:
0.1 Vol.-%
|
Length:
330 mm
|
Manufacturer Article Number:
0750WG
|
Max. measured value:
5 Vol.-%
|
Measured range:
0 ... 5 Vol.-%
|
Min. measured value:
0 Vol.-%
|
Reference temperature:
20 °C
|
With thermometer:
Ja
According to E.E. 76/765. Class II, ethanol % vol. Suitable for official testing. Reference temperature: 20 °C. With thermometer.
Variants from €98.90*
Ground size:
NS10/19
|
Manufacturer Article Number:
43205
|
Material:
Boro 3.3
|
Nominal capacity:
5 ml
|
Standard:
DIN ISO 3507
|
Type of construction (Pycnometers):
Acc. to Gay-Lussac
|
UNSPSC:
41-10-33-16
All BLAUBRAND® density bottles are supplied with one accompanying individual certificate in the original packaging. On request, they are also available with a DAkkS calibration certificate.DIN ISO 3507,Gay-Lussac typeStopper NS 10/19 with capillaryTop of stopper ground and polishedNominal capacity printed on the bottom
Length mm:
290
|
Manufacturer Article Number:
0651WG
|
Measuring range Bé:
-1 / 0 / +1
|
UNSPSC:
41-10-33-12
Dr. Ammer type.For testing boiler feedwater.With integral thermometer and temperature correction.Reference temperature +20°C.
Manufacturer Article Number:
0899
|
Type:
Battery hydrometer
Battery acid tester 1.10 to 1.30.Boxed complete with glass tube, rubber bulb and hydrometer.
Division:
0.002 g/cm³
|
Dual Use:
0
|
Length:
300 mm
|
Manufacturer Article Number:
3001220-R1
|
Material:
PC
|
Max. measured value:
1.220 g/cm³
|
Measured range:
1.000 ... 1.220 g/cm³
|
Min. measured value:
1.000 g/cm³
|
Reference temperature:
20 °C
Hydrometers made of high-quality plastics (polycarbonate).Breakage protected (no glass breakage)Fully made of resistant polycarbonate (PC)High transparency (like glass), easy-to-read scalesHigh precision and reproducibilitySuitable for applications in food, pharmaceutical and cosmetic industries as well as many othersMeasuring units: specific gravity, density, Oechsle, % mass, Brix, saturation, ° Baumé, etc.Made in GermanyWorks certificate available on request (option)Food safety according to HACCP
Colour filling:
Blue
|
Division:
0.001 g/cm³
|
Length:
350 mm
|
Manufacturer Article Number:
3051002S
|
Max. measured value:
0.800 g/cm³
|
Max. temperature:
35 °C
|
Measured range:
0.700 ... 0.800 g/cm³
|
Min. measured value:
0.700 g/cm³
|
Min. temperature:
0 °C
|
Reference temperature:
20 °C
|
Temperature:
0 ... 35 °C
|
With thermometer:
Ja
Density Hydrometers with an error limit of ±0.001 g/cm3. With thermometer 0 to 35°C in 1°C increments, blue filling, error limit ±2 °C.Further measuring ranges available on request.
Capacity ml:
1000
|
Manufacturer Article Number:
05660007
|
NS:
60/37
|
Type:
Pycnometer head with conical shoulder bottle
For density determinations (raw density) of bitumen-like materials and mineral materials. Consists of 1000ml wide-neck bottle with conical shoulder and NS joint neck, and pycnometer head.Material: head made of DURAN® tubing, bottle: DURAN®
Variants from €57.00*
Division:
1 °Bé
|
Length:
250 mm
|
Manufacturer Article Number:
3261041-20
|
Max. measured value:
30 °Bé
|
Measured range:
0 ... 30 °Bé
|
Min. measured value:
0 °Bé
|
Reference temperature:
20 °C
|
With thermometer:
No
Without thermometer.
Variants from €12.00*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.32*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.32*