Transparent. Shore A 55. Universal-Laborschlauch mit sehr guten Haftungseigenschaften auf Glas- oder Kunststoff-Fittings. Viel geringere Gasdurchlässigkeit als Gummi. Beständig gegen die meisten Laborchemikalien. Als Pumpenschlauch und für die Lebensmittel- und Getränkeausgabe einsetzbar. Erreicht FDA und USP Class Vl Anforderungen.Temperaturbereich von -50 bis 74 °CGlatte InnenwändeEnthält kein BPA oder Phthalate

Transparent, heat resistant up to 60°C. Hardness 80 Shore A. Supplied per meter.

Food safe, non talc-coated. According to BfR XV (Silicone), FDA 177.2600 and EC 1935/2004, RAU-SIK 6602. Durometer 60 ± 5 Shore A to DIN 53505. Supplied per meter.

Made in a compound of pure PTFE and fine carbon dust.Main characteristics: good conducting capacity, high chemical resistance (except of substances with high reactivity to carbon), load resistance 106 ohm/m, black.Temperature: -200 °C to 250 °C

Silicone rubber (VMQ), transparent, hardness 60 Shore A, food safe, temperature-resistant from -60 to 200 °C (short term up to 260 °C), suitable for peristaltic pumps. BFR XV, FDA CFR 21 õ 177.2600, EP-Europ. Pharmacopoeia / DAB, biocompatibility: Cytotoxicity (USP Class 1-6), Hemolysis, Pyrogenicity, Sensitization, Dermatological Irritation, Implantation (90 days) according to ISO 10993-1. Supplied per meter.

PFA fluorocarbon resin. Highly chemical resistant and temperature resistant up to 260°C.

Red. Durometer 45 Shore A. Supplied per meter.

Flexible connecting line of a rubber tubing with a contracted metal spiral and double-sided end sockets according to DVGW 5501(P). Kink resistant. For connecting between safety gas connection fitting according to DIN 3383-4 and gas burners for laboratories according to DIN 30665 section 1.For all gases according to DVGW worksheet G 260, at pressures up to 100 mbar and temperatures up to 70°C. Installations according to DVGW-TRGI 2008 and DVGW worksheet G 621. DVGW Reg.-No. DG-4607AU2366. Sold only in specified lenght

Versilic® 60 shore tubing is biologically inert and does not inhibit cell culture. It stays flexible down to -50 °C and maintains its chemical, mechanical and electrical performance up to 200 °C. Versilic® meets the European Pharmacopoeia requirements for silicone elastomer for closures and tubing, USP Class VI biological tests and ISO 10993 biocompatibility (systemic toxicity, irritation, sensitization, citotoxicity, hemocompatibility and Ames test).

Transparent. Shore A 55. Universal laboratory tubing with very good gripping properties on glass or plastic fittings. Very low gas permeability level similar to rubber. Resistant to most laboratory chemicals. Suitable for peristaltic pumps and for food and beverage dispensing. Meets FDA and USP class VI.Temperature range -50 to 74°CSmooth inner surfaceContains no BPA or phthalates

Black, thermoplastic elastomer, Shore A 61. Suitable for use as tubing for peristaltic pumps. High endurance. Resistant to many aggressive chemicals.Temperature range -60 to 135 °CSuperior weatheringAbrasion resistantLow gas permeability versus rubber tubingOzone (300 pphm) and UV light resistant

For slurry transfer, pellet and powder transfer, control lines and coolant recovery systems. Resistant to oils, greases and fuels. High tear and abrasion resistance.

Thermoplastic elastomer, beige, Shore A 64. Can be used at temperatures from -51 to 135 °C. Can be autoclaved repeatedly, and non toxic. To USP Class VI. Fulfills FDA and NSF criteria. Suitable for laboratory, medical and research work, e.g. cell culture application. Significantly less gas leakage than silicone. Long working lifespan when used in peristaltic pumps. Ozone and UV resistant. Very good chemical resistance.

Transparent. Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

Natural Rubber, light, transparent, sterilizable to 120 °C. Supplied in 10 m coil.To determine outer diammeter, add wall thickness twice to interal diammeter (Eg: 9.205 243: internal diam. 2.00 mm. + wall thickness 0.30mm x 2 = outer diammeter 2.6mm).

Transparent. PVC with terylene mesh reinforcement. Certificated by German TÜV with due regard to regulatory of DIN EN ISO 5774:2008. Proofed by BGVO directive 2002/72/EC bis 2008/39/EC for food contact. Durometer 77 Shore A. Supplied per meter.

Clear. Shore A 40. For low-torque peristaltic pumps, Synthesis and research set ups and vent and drain lines. Meets FDA requirements for food contact.Soft and flexibleTemperature range -55 °C to 52 °CResistant to corrosive chemicals

Silicone-platinum tubing, Shore A 50. For sterile filling systems, chemistry and blood analyzers and liquid chromatography. Biocompatibility for sensitive applications. To FDA and USP Class VI, in accordance with ISO 10993.Temperature range -81 to 200°CSmooth inner surfaceHigh flexibilityOzone and UV resistant

FEP fluorocarbon resin. Highly chemical resistant and temperature resistant up to 205°C.

Fluoroelastomer Rubber (FPM), blackTemperature range -10 to over 200 °CGood resistance to ozone and weathering, as well as benzine and mineral oilDurometer 75 Shore ASupplied per meter.

Highly chemical resistant. Supplied per meter.