Filter
Filter
BRAND GMBH + CO.KG
96-tube Racks and accessories, for use with robots
Description:
Rack with lid with 96 coded 0.65 ml tubes
|
Material:
PP
Thanks to the stable connection between the mounting plate and the racks, the stackable SBS racks are especially well-suited for use with robots and other automated dispensing systems. Coded tubes (A1 - H12) and rack sides suitable for barcode labels simplify sample organization.Tubes and rack are autoclavable at 121 °C (2 bar), acc. DIN EN 285Tubes, racks, and lids can withstand temperatures as low as -80 °CThe seal of the tubes is pressure-tested
€642.60*
Eppendorf SE
Accessories for Eppendorf Tubes® 25 ml, PP
Description:
Storage box 3 x 3, PP, for 9 tubes 25 ml
€23.10*
BRAND GMBH + CO.KG
Cap inserts, PP, for reaction tubes
Colour:
blue
For caps without tamper-proof closure.
€18.80*
Greiner Bio-One GmbH
Cell culture tube CELLSTAR®, PS
Height mm:
100
|
Volume ml:
12
|
Ø mm:
17
Transparent, sterile, with red screw cap and round bottom. Improved cell adhesion through physical surface treatment. Free of detectable DNase, RNase and human DNA. Free of detectable endotoxins, free of cytotoxic substances.
€344.20*
Eppendorf SE
DNA LoBind Tubes, with screw cap
Max. rcf x g:
25000
|
Nominal capacity ml:
5
|
Package contents:
2 bags of 100 tubes
Less than 1% loss of DNA / RNA at low concentrations and critical conditions (high salt, short DNA-fragments)No surface coating, e.g. siliconeFree of DNA, DNase, RNase and PCR inhibitors (PCR clean)Novel PP, manufactured under optimized conditionsHighly transparent
€73.30*
Eppendorf SE
DNA LoBind Tubes, with snap-on lid
Max. rcf x g:
17000
|
Nominal capacity ml:
25
|
Package contents:
5 bags of 40 tubes
Less than 1% loss of DNA / RNA at low concentrations and critical conditions (high salt, short DNA-fragments)No surface coating, e.g. siliconeFree of DNA, DNase, RNase and PCR inhibitors (PCR clean)Novel PP, manufactured under optimized conditionsHighly transparent
€16.40*
Nolato Treff AG
DNA Microtubes CapLock LoTrace®, PP
Bottom shape:
round
|
Material:
PP
|
Max. rcf:
30000
|
Nominal capacity ml:
0.5
|
Temp. range °C:
-195 ... 121
For low content DNA sample preparation and assay.Double-Lock™ cap closing systemLow binding DNA surfaceFree of RNase, DNase, human DNA, endotoxins, PCR inhibitors, ATPManufactured under clean room conditionsAutoclavable
From
€7.40*
Nolato Treff AG
DNA Microtubes EasyFit LoTrace®, PP
Bottom shape:
round
|
Material:
PP
|
Max. rcf:
30000
|
Nominal capacity ml:
0.5
|
Temp. range °C:
-195 ... 121
For low content DNA sample preparation and assay.Low binding DNA surfaceFree of RNase, DNase, human DNA, endotoxins, PCR inhibitors, ATPManufactured under clean room conditionsAutoclavable
From
€6.45*
Nolato Treff AG
DNA Microtubes LightBlock™ LoTrace®, PP
Bottom shape:
round
|
Colour:
black
|
Material:
PP
|
Max. rcf:
30000
|
Nominal capacity ml:
1.5
|
Temp. range °C:
-195 ... 121
Black. For sample preparation and storage of light sensitive samples.Low binding DNA surfaceFree of RNase, DNase, human DNA, endotoxins, PCR inhibitors, ATPProduced under clean room conditionsAutoclavable
From
€6.65*
Eppendorf SE
Eppendorf tubes SnapTec®, PP
Description:
Eppendorf Quality™
|
Max. rcf x g:
17000
|
Nominal capacity ml:
25
|
Package contents:
5 bags à 40 tubes
|
Sterile:
no
Transparent. For cell culture applications, sample preparations, storage and transport of samples. The SnapTec® lids allow single-handed opening and closing for quick liquid extraction or addition.ConicalSingle handed operationTemperature resistant from -86 °C to 100 °CAutoclavable at 121 °C, 20 min.
€57.80*
Eppendorf SE
Eppendorf Tubes® 25 ml, PP, starter pack
Description:
Starter pack 2
Transparent. For cell culture applications, sample preparations, storage and transport of samples. The SnapTec™ cap version allows single-handed opening and closing for quick liquid extraction or addition. Also available with HDPE screw cap.ConicalSingle-Handed OperationTightness from -86 °C to 100 °CMax. RZB 17000 x gLower hight than 15 ml / 50 ml conical tubesThe SnapTec tubes are autoclavableStarter pack 1: 200 Eppendorf Conical Tubes® 25 ml with snap cap SnapTec™, PCR clean, 4 single tube stands, 6 adapters for rotors with bore for 50 ml conical tubesStarter pack 2: 200 Eppendorf Conical Tubes® 25 ml with screw cap, PCR clean, 4 single tube stands, 6 adapters for rotors with bore for 50 ml conical tubes
€115.00*
Eppendorf SE
Eppendorf Tubes® 5.0 mL, PP, with hinged lid
Description:
Eppendorf Tubes® 5.0 ml, Forensic DNA Grade, single packed
|
Package contents:
4 bags of 50
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedHinged lid for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86 °C to 80 °CFrom 80 °C on, please use tube clips (cat. no. 9.409 294)
€45.10*
Eppendorf SE
Eppendorf Tubes® 5.0 mL, PP, with hinged lid, amber
Description:
Eppendorf Tubes® 5.0 mL, Eppendorf Quality™
|
Package contents:
2 bags of 100
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedHinged lid for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86 °C to 80 °CFor light-sensitive samplesFrom 80 °C on, please use tube clips (cat. no. 9.409 294)
€57.60*
Eppendorf SE
Eppendorf Tubes® 5.0 mL, PP, with screw cap
Description:
Eppendorf Tubes® 5.0 mL, Forensic DNA Grade
|
Package contents:
4 bags of 50
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedOperating temperature range -86 °C to 100 °C
€74.60*
Eppendorf SE
Eppendorf Tubes® 5.0 mL, PP, with screw cap, amber
Description:
Eppendorf Tubes® 5.0 mL
|
Package contents:
2 bags of 100
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedOperating temperature range -86 °C to 100 °CFor light-sensitive samples
€78.10*
Eppendorf SE
Eppendorf Tubes® 5.0 mL, starter pack, with snap caps
Description:
Eppendorf Tubes® 5.0 mL, starter pack, with snap caps
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedSimple, practical and ergonomic single-hand operationLarge labelling areaHinged lid for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86°C to 80°CMaximum safety and stability for centrifugation up to 25000 x gFree of human DNA, free of DNase and RNase, free of PCR inhibiting agentsFor PCR preparations or any reactions where DNase or RNase could interfere with the reaction or analysisFrom 80 °C on, please use tube clips (cat. no. 9.409 294)Scope of supply:400 Eppendorf Tubes® 5.0 mL, PCR clean (Certified purity grade), 8 universal adapters for rotors with bores for 15 ml conical tubes, 2 tube racks 5.0 mL (12 spaces, white)
€160.00*
Eppendorf SE
Eppendorf Tubes®, PP, amber, with screw cap, HDPE
Description:
Pyrogen-, DNase-, RNase- and DNA-free
|
Max. rcf x g:
19500
|
Nominal capacity ml:
15
|
Package contents:
4 bags of 50 tubes
|
Sterile:
+
For cell culture applications, sample preparation and storage of samples and solutions.ConicalTemperature resistant from -86 °C to 100 °CFor light-sensitive samples
€70.90*
Eppendorf SE
Eppendorf Tubes®, PP, with 2D SafeCode
Nominal capacity ml:
15
|
Package contents:
10 bags à 50 tubes
Eppendorf Tubes® with two-level coding (clear coding, 2D datamatrix code) for safe sample identification. Code reading is possible even up to 30 % damaged code. Data processing software is optionally available, further information on request. SterileConicalWith screw capPyrogen-, DNase-, RNase- and DNA-freePre-coded for immediate useTemperature range: -86 °C to 121 °C
€125.00*
LLG Labware
LLG-Centrifuge tubes, 5 ml, PP, with Safe-Lock lid
Form:
Conical
|
Max. rcf x g:
25000
|
Sterile:
No
|
Temp. range °C:
-86 ... 121
|
Volume ml:
5.0
LLG-Centrifuge tubes are versatile and suitable for general laboratory applications such as incubation, centrifugation, and storage of samples. With tight-fitting Safe-Lock lid, which prevents unintentional opening of the lid during centrifugation.Frosted labelling area on the lidLid membrane can be easily piercedEasy opening and closing with one handGraduation lines for visual volume controlRNase- and DNase-free
€36.00*
LLG Labware
LLG-Centrifuge tubes, 5ml, PP
Description:
Amber
|
Package contents:
1 bag of 250 pieces
The LLG-Centrifuge tubes, 5ml, represent the perfect solution for all laboratory applications requiring incubation, centrifugation and sample handling in an intermediate volume range. Available in amber for use with light sensitive samples.Max. 25000 x g, suitable for high speed centrifugationGraduations every 0.25 ml for easy volume estimationA flat, frosted cap and large writing pad for sample labeling and identificationAutoclavableFits all rotors and racks that hold 15 ml conical tubes, no adapters neededCertified free of RNase and DNase
€40.30*
LLG Labware
LLG-Microcentrifuge tubes, PP
Form:
conical
|
Max. rcf:
20000
|
Volume ml:
0.5
LLG Microtubes cover standard volumes for a variety of sample tests. They are available in 0.5 ml, 1.5 ml and 2.0 ml volumes. These standard Microtubes withstand high centrifugal forces, are temperature and chemically-resistant and guaranteed leak-free. An innovative and modern new generation of Microtubes with new features. Perfect sealing qualities, excellent chemical stability and optimal construction materials guarantee even better resistance to centrifugal and chemical forces. Easy to open and to close thanks to the improved lid geometry. For visual volume control the 1.5 ml tubes are equipped with graduations at 0.5 ml, 1.0 ml and 1.5 ml. The 2.0 ml tubes have graduations at 0.5 ml, 1.0 ml, 1.5 ml and 2.0 ml. The 0.5 ml tubes have no graduations.Certified DNase-, RNase- and pyrogen-free.Clear, in bags. Suitable for microbiology. Guaranteed metal-free.SpecificationsAutoclavabilityTemperature:121 °CPressure:1.05 bar or 15 psiTime:20 min or lessCentrifugationFixed angle rotor:25000 x gSwing out rotor:70000 x g
From
€19.00*
LLG Labware
LLG-Microcentrifuge tubes, PP, with Safe-Lock lid
Form:
Conical
|
Max. rcf x g:
15000
|
Sterile:
No
|
Temp. range °C:
-86 ... 121
|
Volume ml:
1.5
LLG-Microcentrifuge tubes are versatile and suitable for general laboratory applications such as incubation, centrifugation, and storage of samples. With tight-fitting Safe-Lock lid, which prevents unintentional opening of the lid during centrifugation.Frosted labelling area on the lidLid membrane can be easily piercedEasy opening and closing with one handGraduation lines for visual volume controlRNase- and DNase-free
€22.00*
LLG Labware
LLG-Test and centrifuge tubes with rim, PS or PP
Height mm:
75
|
Material:
PS
|
Max. rcf:
1400
|
Max. temp. °C:
80
|
Volume ml:
4
|
Ø mm:
12
Ideal for all laboratory applications in the intermediate volume range up to 12 ml, such as incubation, centrifugation or sample preparation.Tube made of transparent PS or opaque PPRound bottomGraduatedLarge writing areaPlease order matching Dual-Position caps separately.
€35.90*
BRAND GMBH + CO.KG
Micro test tubes and racks, PP, 1.2 ml
Type:
Rack with 96 single test tubes, non-sterile, PP
Suitable for biological examination, e.g. PCR, cell uptake studies, RIA, EIA, etc. Functional design for storing, freezing and transporting reagents and samples. Compatible with standard microtitre plates and suitable for work with multi-channel pipettes.8 x 12 configurationAlphanumeric identification systemTubes and rack are autoclavable at 121 °C (2 bar), according to DIN EN 285Tube dimensions: 8.8 mm external Ø, height 45 mmSuitable for storage up to -80°CTest tube capacity 1.2 ml (1.1 ml when capped )Individual tube or 8-tube strips availableWith PE cap (not autoclavable)BIO-CERT® CERTIFIED QUALITY
€37.50*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.10*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.10*
Reaction vessels
We offer reaction tubes made of polypropylene (PP) in different volume sizes from well-known manufacturers. In our online store you will find the corresponding tubes from 0.5 ml, 1.5 ml, 2.0 ml, 5 ml and 25 ml volume with lid locks such as Safe-Lock and SnapTec closure up to the 15 ml and 50 ml conical centrifuge tubes with conventional screw cap. You will also find reaction tubes with screw cap in conical design and with stand ring as well as with matching color-coded lid inserts.
Your watch lists
Loading...