Clamping range:
1 ... 10 mm
|
Depth:
196 mm
|
Dimensions (WxDxH):
80 x 196 x 215 mm
|
Display:
Scale
|
Height:
215 mm
|
IP code:
IP 40
|
Manufacturer Article Number:
SA201A0151
|
Max. Viscosity:
25000 mPa·s
|
Max. clamping width:
10 mm
|
Max. speed:
2000 1/min
|
Max. stirring capacity:
25 l
|
Max. torque:
40 Ncm
|
Max. voltage:
230 V
|
Min. clamping width:
1 mm
|
Min. speed:
50 1/min
|
Min. voltage:
110 V
|
Plug type:
EU
|
Power supply:
110 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
120 W
|
Speed:
50 ... 2,000 1/min
|
Type:
LS System
|
Type of auxiliary energy:
Mains connection
|
Warranty:
3 years
|
Weight:
2.3 kg
|
Width:
80 mm
|
With connection ext. temperature sensor:
No
|
With timer:
No
Robust overhead stirrer for general tasks. Stirs media with low to medium viscosity up to 25000 mPas.Electronic speed controlGentle start-up to avoid splashing and blisteringChemical resistant and corrosion protected housingBlocking detection with switch-off functionNo tool required for assembly of the stirring toolScope of supply: Overhead stirrer, stand, double clamp, stirring shaft with fixed blade
Accuracy speed:
±1 %
|
Accuracy speed Number:
1 %
|
Clamping range:
2.5 ... 10.5 mm
|
Depth:
247 mm
|
Dimensions (WxDxH):
86 x 247 x 350 mm
|
Display:
Digital
|
Height:
350 mm
|
IP code:
IP 54
|
Manufacturer Article Number:
501-61010-03
|
Max. Viscosity:
60000 mPa·s
|
Max. clamping width:
10.5 mm
|
Max. speed:
2000 1/min
|
Max. stirring capacity:
50 l
|
Max. torque:
100 Ncm
|
Max. voltage:
240 V
|
Min. clamping width:
2.5 mm
|
Min. speed:
10 1/min
|
Min. voltage:
100 V
|
Plug type:
UK
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
90 W
|
Speed:
10 ... 2,000 1/min
|
Type:
Hei-TORQUE Expert 100
|
Type of auxiliary energy:
Mains connection
|
Weight:
4.4 kg
|
Width:
86 mm
|
With connection ext. temperature sensor:
No
|
With timer:
No
Ideal for all standard stirring tasks. They are designed to mix and disperse media that require non-reproducible results in high-viscosity applications.Indication of torque tendencies to monitor viscosity changesDigital 2.4" display for ease of operationConstant speed even under changing loadsSafe start and stop of operation via slide touch panelMinimum noise level at maximum power (
Heidolph Scientific
Mechanisches Rührwerke RZR 1
Der mechanische Laborrührer ist ideal für Standardanwendungen aller Art. Er ist insbesondere geeignet für schnelle und zuverlässige Rühraufgaben, die nicht reproduzierbar sein müssen.Aufgrund der 2 Getriebestufen werden überproportional hohe Drehmomente erreichtSkala von 35 bis 2200 min-1 zur DrehzahleinstellungDurch die schlanke Bauweise passt der Laborrührer in jeden AufbauDie Rührwelle kann durch das Gehäuse durchgeführt und die Rührflügel daher in jeder beliebigen Höhe positioniert werdenDer optionaler Rührwellenschutz verhindert Unfälle mit dem schnell rotierenden RührflügelSpezifikationenMax. Rührmenge (H2O):20 lDrehzahl:35 ... 250 min-1
280 ... 2200 min-1Max. Viskosität:40000 mPasMotorleistung Aufnahme/Abgabe:77/18 WMax. Drehmoment an der Rührwelle:100 NcmAnzeige:SkalaSpannfutter-Spannbereich:8 mmAbmessungen (B x T x H):71 x 172 x 250 mmGewicht:2,7 kgNetzanschluss:230 V, 50/60 HzSchutzart:IP 20
Clamping range:
1 ... 10 mm
|
Depth:
196 mm
|
Dimensions (WxDxH):
80 x 196 x 215 mm
|
Display:
Digital
|
Height:
215 mm
|
IP code:
IP 40
|
Manufacturer Article Number:
SA201A0155
|
Max. Viscosity:
25000 mPa·s
|
Max. clamping width:
10 mm
|
Max. speed:
2000 1/min
|
Max. stirring capacity:
25 l
|
Max. torque:
40 Ncm
|
Max. voltage:
230 V
|
Min. clamping width:
1 mm
|
Min. speed:
50 1/min
|
Min. voltage:
110 V
|
Plug type:
EU
|
Power supply:
110 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
120 W
|
Speed:
50 ... 2,000 1/min
|
Type:
DLS System
|
Type of auxiliary energy:
Mains connection
|
Warranty:
3 years
|
Weight:
2.5 kg
|
Width:
80 mm
|
With connection ext. temperature sensor:
No
|
With timer:
Yes
Powerful overhead stirrer with display for stirring of low to medium viscosity media up to 25000 mPas.Stable torque over the entire speed range with automatic compensation on viscosity changesElectronic speed controlGentle start-up to avoid splashing and blisteringChemical resistant and corrosion protected housingBlocking detection with switch-off functionNo tool required for assembly of the stirring toolDisplay shows all important parametersTimer with automatic power-off (up to 999 min 59 sec)Scope of supply: Overhead stirrer, stand, double clamp, stirring shaft with propeller
Rührertyp:
Dissolverrührer
|
Strömungsbild:
radial
|
Manufacturer Article Number:
0001243300
|
Stirring head Ø:
40 mm
|
Type:
R 1402
|
UNSPSC:
41-10-38-10
Rührertyp:
Flächenrührer
|
Rührkreis:
67 mm
|
Length:
400 mm
|
Manufacturer Article Number:
6263458
|
Material:
Stainless steel
|
Stirring rotor Ø:
8 mm
Flächenrührer für das sanfte Mischen und Homogenisieren von Medien bei niedrigen bis mittleren Geschwindigkeiten. Das Paddel erzeugt ein tangentiales Strömungsbild und verursacht wenige Turbulenzen.
Clamping range:
0.5 ... 10 mm
|
Depth:
231 mm
|
Dimensions (WxDxH):
91 x 231 x 297 mm
|
Display:
Digital
|
Height:
297 mm
|
IP code:
IP 40
|
Manufacturer Article Number:
0003992000
|
Max. Viscosity:
100000 mPa·s
|
Max. clamping width:
10 mm
|
Max. speed:
2000 1/min
|
Max. stirring capacity:
100 l
|
Max. temperature:
350 °C
|
Max. torque:
200 Ncm
|
Max. voltage:
230 V
|
Min. clamping width:
0.5 mm
|
Min. speed:
6 1/min
|
Min. temperature:
-10 °C
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
130 W
|
Speed:
6 ... 2,000 1/min
|
Temperature:
-10 ... 350 °C
|
Type:
EUROSTAR 200 control
|
Type of auxiliary energy:
Mains connection
|
Weight:
4.9 kg
|
Width:
91 mm
|
With connection ext. temperature sensor:
Yes
|
With timer:
Yes
Extrem leistungsstarkes Rührwerk für hochviskose Medien für Mengen bis zu 100 l (H2O), konzipiert mit abnehmbarer Fernbedienung und digitalem TFT-Display. Konstante Drehzahl durch mikroprozessorgesteuerte Regelung mit einem Drehzahlbereich von 0/6 bis 2000 min-1 (zwei Drehzahlbereiche). Das Rührwerk hat eine RS 232 und eine USB Schnittstelle zur Ansteuerung und zur Dokumentation aller Parameter. Eine integrierte Drehmoment-Trendanzeige misst die Viskositätsänderung der Probe. Ein elektronischer Sicherheitskreis garantiert das Abschalten des Gerätes im Fehlerfall oder bei Überlastung. Kontinuierlicher Angleich von Soll- und Istdrehzahl, um Abweichungen automatisch anzupassen. Dies garantiert eine konstante Geschwindigkeit auch bei einer Viskositätsänderung des Mediums.Mehrsprachiges TFT-DisplayAbnehmbare FernbedienungProgrammierbare FunktionenIntegrierte TemperaturmessungIntervallbetriebZeitschaltuhrEinstellbarer SicherheitskreisVerriegelungsfunktionStufenlos einstellbare DrehzahlenÜberlastungsschutzKurzzeitiger Überlastbetrieb
Adjustable height:
980 ... 1,860 mm
|
Depth:
732 mm
|
Dimensions (WxD):
1,350 x 732 mm
|
Manufacturer Article Number:
0000738700
|
Max. adjustable height:
1860 mm
|
Min. adjustable height:
980 mm
|
Weight:
72 kg
|
Width:
1350 mm
Adjustable height:
620 ... 1,010 mm
|
Depth:
420 mm
|
Dimensions (WxD):
460 x 420 mm
|
Manufacturer Article Number:
0001412100
|
Max. adjustable height:
1010 mm
|
Min. adjustable height:
620 mm
|
Type:
R 2723
|
Width:
460 mm
Stabile Stative mit Fuß in H-Form. Stative verfügen über eine Ausgleichschraube zum Ausgleichen von Unebenheiten auf dem Labortisch. Max. Belastbarkeit 10 kg.
Anzahl Rührblätter:
4
|
Rührertyp:
Propellerrührer
|
Strömungsbild:
axial
|
Length:
400 mm
|
Manufacturer Article Number:
6263454
|
Material:
Stainless steel
|
Stirring head Ø:
50 mm
|
Stirring rotor Ø:
8 mm
Propellerrührer für das Mischen und Homogenisieren von Medien bei mittleren bis hohen Geschwindigkeiten. Der Propeller erzeugt ein axiales Strömungsbild.
Variants from €55.88*
Accuracy speed:
±3 1/min
|
Accuracy speed Number:
3 1/min
|
Clamping range:
0.5 ... 10 mm
|
Depth:
186 mm
|
Dimensions (WxDxH):
83 x 186 x 220 mm
|
Display:
Digital
|
Height:
220 mm
|
IP code:
IP 21
|
Manufacturer Article Number:
6263427
|
Max. Viscosity:
10000 mPa·s
|
Max. clamping width:
10 mm
|
Max. speed:
2200 1/min
|
Max. stirring capacity:
20 l
|
Max. torque:
40 Ncm
|
Max. voltage:
240 V
|
Min. clamping width:
0.5 mm
|
Min. speed:
50 1/min
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
70 W
|
Speed:
50 ... 2,200 1/min
|
Type:
LLG-uniSTIRRER OH2 pro
|
Type of auxiliary energy:
Mains connection
|
Warranty:
3 years
|
Weight:
2.8 kg
|
Width:
83 mm
|
With timer:
No
Cost-effective, universal laboratory stirrer for simple stirring tasks up to 20 litres (H2O). An electronic safety circuit guarantees that the appliance is switched off in the event of a fault or overload. Microprocessor control continuously synchronises set and actual speed. This means that the speed remains constant even if the viscosity of the medium changes.Brushless, maintenance-free motorRobust housingDigital display of speed and torqueInfinitely adjustable speedOverload protectionNon-slip matQuick-release chuck enables simple stirrer shaft change without toolsSilicone cover protects drill chuck and motor from erosive vapours and splashesRS232 interfaceScope of supply: Overhead stirrer, stand, non-slip mat, 4-blade propeller stirrer
Clamping range:
3 ... 16 mm
|
Depth:
268 mm
|
Dimensions (WxDxH):
114 x 268 x 345 mm
|
Display:
Digital
|
Height:
345 mm
|
IP code:
IP 42
|
Manufacturer Article Number:
0004214100
|
Max. Viscosity:
100000 mPa·s
|
Max. clamping width:
16 mm
|
Max. speed:
2000 1/min
|
Max. stirring capacity:
150 l
|
Max. temperature:
350 °C
|
Max. torque:
400 Ncm
|
Max. voltage:
230 V
|
Min. clamping width:
3 mm
|
Min. speed:
6 1/min
|
Min. temperature:
-10 °C
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
226 W
|
Speed:
6 ... 2,000 1/min
|
Temperature:
-10 ... 350 °C
|
Type:
EUROSTAR 400 control
|
Type of auxiliary energy:
Mains connection
|
Weight:
8.8 kg
|
Width:
114 mm
|
With connection ext. temperature sensor:
Yes
|
With timer:
Yes
Leistungsstarkes Laborrührwerk für hochviskose Medien und intensives Mischen für Mengen bis 150 l (H2O). Konstante Drehzahl durch mikroprozessorgesteuerte Regelung mit einem Drehzahlbereich von 0/6 bis 2000 min-1 (zwei Drehzahlbereiche). Das Rührwerk hat eine RS 232 und eine USB Schnittstelle zur Ansteuerung und zur Dokumentation aller Parameter. Eine integrierte Drehmoment-Trendanzeige misst die Viskositätsänderung der Probe. Ein elektronischer Sicherheitskreis garantiert das Abschalten des Gerätes im Fehlerfall oder bei Überlastung. Kontinuierlicher Angleich von Soll- und Istdrehzahl, um Abweichungen automatisch anzupassen. Dies garantiert eine konstante Geschwindigkeit auch bei einer Viskositätsänderung des Mediums.Stufenlos einstellbare DrehzahlRührwellen durchsteckbarÜberlastungsschutzKurzzeitiger ÜberlastbetriebSchmale BauweiseMehrsprachiges TFT-DisplayProgrammierbare FunktionenIntegrierte TemperaturmessungIntervallbetriebZeitschaltuhrEinstellbarer SicherheitskreisVerriegelungs-FunktionAnschluss für externen TemperaturmessfühlerLieferumfang: Rührwerk, Temperatursensor H 67.60, WiCo Halterung WH 11
Anzahl Rührblätter:
2
|
Rührertyp:
Zentrifugalrührer
|
Strömungsbild:
radial
|
Length:
400 mm
|
Manufacturer Article Number:
6263459
|
Material:
Stainless steel
|
Stirring head Ø:
80 mm
|
Stirring rotor Ø:
8 mm
Zentrifugalrührer für das Mischen und Homogenisieren von Medien bei mittleren bis hohen Geschwindigkeiten. Die Flügel richten sich während des Rührens aus und erzeugen ein radiales Strömungsbild. Ideal zum Rühren in Gefäßen mit schmalem Hals.
Manufacturer Article Number:
99968-16
|
Type:
Small Paddle stirrer
For use with 9.950 401 and 9.950 402 shafts.
Variants from €60.61*
Clamping range:
0.5 ... 10 mm
|
Depth:
208 mm
|
Dimensions (WxDxH):
86 x 208 x 248 mm
|
Display:
Digital
|
Height:
248 mm
|
IP code:
IP 42
|
Manufacturer Article Number:
0004442000
|
Max. Viscosity:
10000 mPa·s
|
Max. clamping width:
10 mm
|
Max. speed:
2000 1/min
|
Max. stirring capacity:
15 l
|
Max. torque:
20 Ncm
|
Max. voltage:
230 V
|
Min. clamping width:
0.5 mm
|
Min. speed:
0 1/min
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
70 W
|
Speed:
0 ... 2,000 1/min
|
Type:
EUROSTAR 20 digital
|
Type of auxiliary energy:
Mains connection
|
Weight:
3.9 kg
|
Width:
86 mm
Overhead stirrer designed for simple stirring tasks for quantities up to 15 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 to 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.Digital speed displayInfinitely adjustable speedPush-through agitator shaftsOverload protectionShort-term overload operationSpecificationsStirring quantity max. (H2O):15 lMax. viscosity:10000 mPasMotor rating input/output:70 / 42 WSpeed range:0/30 to 2000 rpmMax. torque at stirring shaft:20 NcmDisplay:LEDChuck range:0.5 to 10 mmDimensions (W x D x H):86 x 208 x 248 mmWeight:4.4 kgProtection class DIN EN 60529:IP 42Power supply:230 V, 50/60 Hz
Length mm:
350
|
Manufacturer Article Number:
C 377-08
|
Shaft diam. mm:
8
|
To fit chuck diam. mm:
6.5
|
UNSPSC:
40-16-17-01
|
Ø Paddle mm:
90
With PTFE-coated, stainless steel shaft.
Variants from €137.20*
Description:
Maxi propeller-three-bladed
|
Length mm:
26
|
Manufacturer Article Number:
C 441-16
|
Paddle diam. mm:
200
|
Shaft diam. mm:
16
|
UNSPSC:
41-12-18-02
Useful extension to the existing range of Bola stirrer shafts. The additional blades can optionally be fixed in your preferred position on every stirrer shaft with diameter 8,10 or 16 mm (a flat spanner is included). The stirrer blades are entirely made of PTFE, the mounting devices are made of a special PTFE-compound. A high chemical and thermical (-200 to +250 °C) resistance is assured. This "building block system" allows the user to define a stirrer of their own special requirements.
Variants from €62.40*
Clamping range:
0.5 ... 10 mm
|
Depth:
208 mm
|
Dimensions (WxDxH):
86 x 208 x 248 mm
|
Display:
Digital
|
Height:
248 mm
|
IP code:
IP 42
|
Manufacturer Article Number:
0004238100
|
Max. Viscosity:
70000 mPa·s
|
Max. clamping width:
10 mm
|
Max. speed:
1300 1/min
|
Max. stirring capacity:
100 l
|
Max. torque:
100 Ncm
|
Max. voltage:
230 V
|
Min. clamping width:
0.5 mm
|
Min. speed:
0 1/min
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
186 W
|
Speed:
0 ... 1,300 1/min
|
Type:
EUROSTAR 100 digital
|
Type of auxiliary energy:
Mains connection
|
Weight:
3.9 kg
|
Width:
86 mm
|
With timer:
No
Powerful laboratory stirrer for highly viscous applications and intensive mixing for quantities up to 100 l (H2O). It automatically adjusts the speed through microprocessor controlled technology. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.Digital speed displayInfinitely adjustable speedPush-through agitator shaftsOverload protectionShort-term overload operationSlim casingQuiet operationError code displaySpecificationsStirring quantity max. (H2O):100 lMax. viscosity:70000 mPasMotor rating input/output:186 / 136 WSpeed range:0/30 ... 1300 rpmMax. torque at stirring shaft:100 NcmDisplay:LEDChuck range:0.5 ... 10 mmProtection class DIN EN 60529:IP 42Power supply:230 V, 50/60 Hz
Length mm:
1500
|
Manufacturer Article Number:
42-808-001+F0002
|
Thread M:
10
|
UNSPSC:
41-10-38-00
|
Ø mm:
10
Stainless steel 1.4301. With screwthread fitting as outlined below.
Variants from €10.73*
Length mm:
450
|
Manufacturer Article Number:
C 384-04
|
To fit chuck diam. mm:
6.5
|
UNSPSC:
41-12-18-02
|
Ø agitator mm:
60
|
Ø agitator shaft mm:
8
The stirrer shafts consist of a PTFE-jacketed, stainless steel shaft and a stirrer paddle made of solid PTFE. The stainless steel core assures stability of the stirrer shaft and allows safe attachment of the stirrer chuck. Thanks to the thick PTFE coat and the paddle made of solid PTFE, the medium will only come into contact with PTFE. High chemical resistance makes it almost universally suitable. PTFE is extremely nonstick so that residues are repelled from shaft and paddle. The stirrer shafts are similar in size to (KPG) glass stirring rods and are therefore interchangeable easily.Operating temperature: -200°C to +250°CAdditional sizes and accessories are available on request.Information on the mixing effects of the different stirring geometries can be found in the descriptions of the stainless steel stirring rotors.Recommended for low speed operations.Additional wings available on request
Variants from €181.90*
Description:
Quick-lock drill chuck
|
For:
LLG-uniSTIRRER OH2, OH2 pro
|
Manufacturer Article Number:
6263424
Variants from €59.62*
For Vessels mm:
115-200
|
Length mm:
500
|
Manufacturer Article Number:
509-17080-00
|
Material:
AISI 316Ti
|
Ø agitator shaft mm:
10
The worldwide patented VISCO JET® Mixing System is the result of the so-called cone-principle. Turbulent flows are created at the taper end by acceleration, displacement and retardation. These flows advance through the stirred medium and result in the new dynamic mixing motion.One system for literally all mixing tasks for low to high viscosity mediaPatented cone-principle creates even at low speeds a turbulent flow which is unique to the VISCO JET®Even with high-viscosity media and gels which naturally do not mix by using common impellers you will observe an immediate flow through the entire beakerThis technology allows for de-gassing of gels while preventing air intake and foamingReduce process times significantly while performing the best mixing result everThe stirring systems are made of stainless steel (V4A or AISI 316 Ti) or polyoxymethylene (POM).Other versions available.
Variants from €85.00*
Strömungsbild:
radial
|
Length:
359 mm
|
Manufacturer Article Number:
0020001206
|
Material:
Stainless steel
|
Stirring head Ø:
30 mm
|
Stirring rotor Ø:
8 mm
|
Type:
R 3004
Generates a radial flow. For drawing the material to be mixed from the top and bottom. For aerating of low viscosity media and for homogenizing solids in liquids. Used at medium to high speeds.
ATEX certification:
Ex II 2G Ex h IIC T4 Gb
|
Capacity max. litres:
3
|
Manufacturer Article Number:
40 26446 00247 3
|
Off-load speed rpm.:
15000
|
Power W:
200
|
Torque Nm:
0.3
|
Type:
PLR 10
|
Viscosity range mPas:
1000
PLR compressed air laboratory stirrers are designed for all kinds of standard mixing tasks. The vane type, air-driven motor offers a high power density and is significantly lighter and smaller than an equivalent electric motor.General specifications:operating pressure max. 6 barair consumption 260 L/min. at 6 barpower output 200W at 6 barclockwise rotationATEX certificationBasic models include:all-stainless steel housingcontinuously adjustable speed control valvesupport arm diam. 14 mmsnap connection for NW 5output shaft L x diam. 26 x 10 mm* analogue tachometerThe viscosity data are intended as a guideline.
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*