Filter
Filter
Novelis Deutschland GmbH
Aluminium containers, round
Bottom diam. mm:
51
|
Capacity ml:
28
|
Fill height mm:
13
|
Top diam. mm:
64
From
€23.90*
Korff AG
Aluminium containers, square
Capacity ml:
2170
|
Fill height mm:
43
|
Length mm:
316
|
Width mm:
215
€39.40*
Novelis Deutschland GmbH
Aluminium containers, square
Capacity ml:
860
|
Dimensions bottom (D x W) mm:
182 x 118
|
Dimensions top (D x W) mm:
218 x 155
|
Fill height mm:
38
* With lid.
€44.00*
Korff AG
Aluminium foil
Description:
Dispenser box
|
Length m:
100
|
Thickness µm:
30
|
Width mm:
600
Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.
€5.94*
Melitta Europa GmbH&Co.KG
Aluminium foil, Toppits®
Length m:
10
|
Width mm:
300
For transporting or keeping food fresh.TearproofHeat resistantEasy handling by tear-off sawAlso available extra wide
From
€8.09*
Korff AG
Aluminium Pop-up sheets
Description:
Box à 200 sheets
Embossed pure aluminium foils, extremely tare resistent.Handy for everyday useHeat-resistant up to 600°CAir-tight and a barrier to lightDimensions (sheet): 230 mm x 270 mm200 sheets in a box
€18.30*
Sonepar Deutschland
Bag sealer SEVERIN FS 3604
Type:
FS 3604, white
With air-suction function, sealing wire and cut off wire.Viewing window2 pilot lights for vacuum control and sealing function1 roll of foil included, width 28.5 cmcable storageOutput approx. 160 W
€36.80*
Ahlstrom-Munksjö Germany GmbH
Bench protection paper, LabSorb
Length cm:
57
|
Type:
Sheets
|
Width mm:
460
LabSorb is two-layered: The top layer is a quality filter paper to enable rapid absorption of spilt liquids. The bottom layer is polyethylene-coated and protects the surface underneath from contamination and damage.Water absorption:280g/m²Surface weight:140g/m²Other formats and sizes are available on request.
€146.86*
Bel-Art Products
Bench protector, Labmat™
Length m:
15.2
|
Width mm:
508
White. Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear. Highly absorbent upper surface. Flexible polyethylene film backing is non-skid and prevents soak-through of most solutions. Simply roll up and discard after contamination.
€176.90*
Bohlender GmbH
Bench protectors, PTFE
Length mm:
1000
|
Thickness mm:
0.05
|
Width mm:
300
Ideal for using as table pad or for lining drawers. Also suitable for using as slideway or for insulation. White foil with universal chemical resistance, temperature resistance from -200 to 250 °C.Rolls of 1 m.
From
€10.10*
Cytiva Europe GmbH
Benchkote surface protector®
Description:
Sheets
|
Length:
0.57 m
|
Width:
460 mm
The upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):Completely absorbs escaped liquidsPrevents spills from reaching the workbenchProtects against contaminationApplications:Surface protection for lab workbenches, trays or chemical cabinetsContamination protection, e. g. in isotope or bacteriological labsAdsorption of toxic or radioactive substancesHygienic protection in animal cagesAtmospheric regulation in humidity chambers
€126.70*
Saint Gobain
Bytac® Bench protectors
Description:
FEP/Alu
|
Length m:
4.6
|
Width mm:
320
Bytac® Bench protectors, FEP Film with Vinyl or Aluminum Backing. Inert to most chemicals - Non-stick; easy to clean - Use to resurface bench tops and line fume hoods. Contrasting work surface for viewing color changes during titrations. Protects surfaces against absorption of radioactive chemicals. Vinyl backing is recommended for all applications up to 93°C. Aluminium foil-backing is resistant to high temperatures up to 182°C for up to one hour.
€86.80*
Melitta Europa GmbH&Co.KG
Cling film Toppits®
Length m:
20
|
Width mm:
320
Easy to use and better adhesionOur best freshness protectionSlight initial determinationVery easy to rollParticularly strongWith time beginning FinderTear-off cap box with stableRole of fixation for easy rolling
From
€5.83*
HK-Pack
Cord string bag, LDPE
Colour:
Transparent
|
Dimensions (WxH):
250 x 350 mm
|
Height:
350 mm
|
Material:
LDPE
|
Max. temperature resistance:
60 °C
|
Temperature resistance:
60 °C
|
Thickness:
50 µm
|
Width:
250 mm
Transparent and resealable packaging bag with a film thickness of 50 µm.Food-safeFreeze-resistantHeat-resistant up to 60 °CTearproofWith white doublestring
From
€12.76*
BRAND GMBH + CO.KG
Cutter for sealing film
Type:
Cutter for Seal-R-film®
The handy Cutter is convenient for clean storage and cutting of sealing film such as BRAND Seal-R-film™. Suitable for 50 mm and 100 mm wide rolls.
€187.40*
A. Rahf Laborbedarf
Desk protector, cork
Depth mm:
200
|
Height mm:
10
|
Width mm:
200
Made from natural agglomerated cork which can be easily cleaned. Non-allergenic, anti-fungal, anti-bacterial and antistatic material. Heat and erosion resistant and also reduces noise and vibration.
From
€4.62*
ISOLAB Laborgeräte GmbH
Dispenser for Parafilm®, ABS
Colour:
blue
|
Dimensions (W x D x H) mm:
120 x 140 x 140
For safe and easy cutting of 1 x 100 mm or 2 x 50 mm width parafilms. The cutting blade can easily slide in both directions providing a clean and uninterrupted cut.
€26.80*
Rische + Herfurth GmbH
Electromagnetic table-top sealers polystar®
Depth mm:
305
|
Height mm:
155
|
Length*:
400
|
Type:
401 M
|
Weight g:
1370
|
Width mm:
560
For polyethylene films up to 2 x 0.40 mm thickness.Seal width:3 mmCurrent input
401 M:
601 M:
3.0 A
7.0 APower consumption
401 M:
601 M:
0.8 kWh
1.5 kWhMains supply:230 V / 50 Hz* Seal length max. (mm)
€1,773.00*
Heathrow Scientific LLC
Heat Sealer with Cutter
Depth mm:
86
|
Height mm:
166
|
Plug type:
EU
|
Width mm:
446
For sealing polyethylene or polypropylene bags, sheets or flat tubing from 0.01 to 0.8 mm thickSliding blade removes excess material 19 mm from the seal.Timing knob ensures safe sealingHeating element measures 310 mm long and is only hot when sealingScope of supply: 2 extra blades, 2 extra heating elements and 2 extra PTFE cloths
From
€267.10*
Rische + Herfurth GmbH
Heat sealers polystar® 243
Description:
With cutting device
|
Type:
polystar® 243
For welding all polyethylene, polypropylene, cellulose or polyamide foils up to a thickness of 2 x 0.25 mm. Expandable with a plug-in table and a film roll-off device. M model sealers have an additional holding magnet as well as a welding and cooling automatic.SpecificationsSealing length:250 mmSealing width:1.5 mmPower consumption:
Power output:0,6 A / 1,2 A*
0,14 kWh / 0,28 kWh*Dimensions:420 x 120 x 135 mmPower supply:230 V, 50 Hz*M-models
€696.00*
Rische + Herfurth GmbH
Heat sealers polystar® 423 M / 583
Type:
polystar® 423 M
For welding all polyethylene, polypropylene, cellulose or polyamide foils up to a thickness of 2 x 0.25 mm. Expandable with a plug-in table and a film roll-off device. With cutting device and double-sided heating tape clamping device. M model sealers have an additional holding magnet as well as a welding and cooling automatic.Specifications423 M / 583Sealing length:440 mm / 600 mmSealing width:1.5 mmPower consumption:
Power output:1.3 A
0.29 kWh / 0.3 kWhDimensions:720 x 120 x 135 mm / 880 x 120 x 135 mmPower supply:230 V, 50 Hz
€1,054.00*
Rische + Herfurth GmbH
Impulse generator polystar®120 GE
Depth mm:
195
|
Description:
Impulse generator polystar® 120 GE
|
Height mm:
135
|
Width mm:
246
For impulse heat sealing tongs 9.106 837 and 9.106 838.Electric current requirement:3.7A max.Power consumption:approx. 0.1kW/hrSupply requirements:220V 50Hz
€496.00*
Rische + Herfurth GmbH
Impulse heat sealing tongs polystar® 120 GE
Length*:
200
|
Type:
200 D
|
Weight g:
750
Double impulse heating. LED readout allows a visual check on the sealing progress. Pressure switch triggers the welding process. A special pressure switch for generating the heat impulse guarantees constant welding results. Includes 3m connection cable.* Seal length max. (mm)
€465.40*
Thermo Elect.LED GmbH (Nalge)
Lab Soakers Nalgene™ VERSI-DRY®, Super, 1050ml/m²
Description:
Roll
|
Dimensions (WxL):
51 x 3050 cm
|
Length:
3050 cm
|
Type:
74000
|
Width:
51 cm
Paper with PE backers. Absorbs 1050ml/m². With a skid-resistant, waterproof, chemical-resistant polyethylene backing that makes spill containment easy. Thousands of Thirsty Cells™ quickly absorb spills and cushion breakable labware. Sized for benchtop, floor, and fume hood. Use as a tray, drawer or shelf liner or to wipe up spills. Includes durable cloth-like top layer that won't fall apart when wet, can be used as a floor soaker.
From
€66.60*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.10*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.10*
Your watch lists
Loading...