Quick delivery
CertoClav Sterilizer GmbH
Tabletop autoclaves CertoClav Vacuum Pro series
Capacity l:
12
|
External dimensions (W x D x H) mm:
500 x 610 x 430
|
Int. depth mm:
360
|
Int. diam. mm:
200
|
Manufacturer Article Number:
8500487
|
Type:
Vac Pro 12
|
Weight kg:
51
Due to the intelligent combination of vacuum, pressure and steam, the autoclaves are suitable for liquids and solids of all kinds. The additional media sensor guarantees a complete sterilisation of liquids such as culture media. Solids of all kinds and hollow materials are optimally sterilised with the help of a vacuum pump. The preheatable chamber, cooling-ventilation and vacuum pump guarantees short cycle times from 20 minutes including drying time.7-inch touchscreenIncluding free CertoCloud software for all protocols and programsRemote maintenance, alarm system via PC, tablet or smartphoneNotification by e-mail and SMS12 customisable programs (45 l version with 8 customisable programs)Interfaces: USB, WiFi, Ethernet, Bluetooth, SD-CardIntegrated documentation (GMP/GLP conform)Standard interfaces for bar scanner, protocol and label printerScope of suppy: Autoclave, tray set, power cable, touchscreenSpecificationsTemperaturrange:105 ... 134 °CCooling system:Air ventingChamber material:Stainless steel 304LOperating pressure:2.3 barHeater power:2400 WPower supply:220 V ±10 % / 50 - 60 Hz
€4,930.00*
PMS TIP TEKNOLOJILERI
Sterilisation rolls, with gusset
Dual Use:
0
|
Length:
100 m
|
Manufacturer Article Number:
GS 7.5100
|
Width:
75 mm
Heat-sealable sterilisation reels as a packaging solution for sterilisation applications, ensure reliable protection of the medical device against contamination with bacteria from the time of sterilisation until use of the sterile medical device. The sterilisation reels are constructed from transparent PET/PP multi-layer copolymer film and medical grade paper. Water based, non-toxic process indicators for steam and ethylene oxide sterilisation (complying with ISO 11140-1) are applied on the paper surface. This helps differentiating between processed and unprocessed packages. The sterilisation reels are effective barriers against germs and according the requirements of ISO 11607, EN 868-5 and ISO 11140-1 standards.Reinforced film to avoid tearing during openingClean and accurate indicator colour changeTear, fibre-free opening and aseptic presentationTriple band seal for higher package integrityHeat sealable sterilisation rollsHeat-sealable sterilisation reels as a packaging solution for sterilisation applications, ensure reliable protection of the medical device against contamination with bacteria from the time of sterilisation until use of the sterile medical device. The sterilisation reels are constructed from transparent PET/PP multi-layer copolymer film and medical grade paper. Water based, non-toxic process indicators for steam and ethylene oxide sterilisation (complying with ISO 11140-1) are applied on the paper surface. This helps differentiating between processed and unprocessed packages. The sterilisation reels are effective barriers against germs and according the requirements of ISO 11607, EN 868-5 and ISO 11140-1 standards.Reinforced film to avoid tearing during openingClean and accurate indicator colour changeTear, fibre-free opening and aseptic presentationTriple band seal for higher package integrityHeat sealable sterilisation rolls
From
€27.10*
PMS TIP TEKNOLOJILERI
Heat-sealable sterilization pouches, with gusset
Dimensions (WxH):
100 x 300 mm
|
Dual Use:
0
|
Height:
300 mm
|
Manufacturer Article Number:
GP 1030
|
UNSPSC:
47121701
|
Width:
100 mm
Heat-sealable sterilisation pouches as a packaging solution for sterilisation applications, ensure reliable protection of the medical device against contamination with bacteria from the time of sterilisation until use of the sterile medical device. The sterilisation pouches are constructed from transparent PET/PP multi-layer copolymer film and medical grade paper. Water based, non-toxic process indicators for steam and ethylene oxide sterilisation (complying with ISO 11140-1) are applied on the paper surface. This helps differentiating between processed and unprocessed packages. The sterilisation pouches are effective barriers against germs and according the requirements of ISO 11607, EN 868-5 and ISO 11140-1 standards.Reinforced film to avoid tearing during openingClean and accurate indicator colour changeTear, fibre-free opening and aseptic presentationTriple band seal for higher package integrityHeat-sealable sterilisation pouches as a packaging solution for sterilisation applications, ensure reliable protection of the medical device against contamination with bacteria from the time of sterilisation until use of the sterile medical device. The sterilisation pouches are constructed from transparent PET/PP multi-layer copolymer film and medical grade paper. Water based, non-toxic process indicators for steam and ethylene oxide sterilisation (complying with ISO 11140-1) are applied on the paper surface. This helps differentiating between processed and unprocessed packages. The sterilisation pouches are effective barriers against germs and according the requirements of ISO 11607, EN 868-5 and ISO 11140-1 standards.Reinforced film to avoid tearing during openingClean and accurate indicator colour changeTear, fibre-free opening and aseptic presentationTriple band seal for higher package integrity
From
€150.50*
interscience
Autoclave deodorant Anabac® natural
Description:
Natural coconut fragrance
|
Dual Use:
0
|
Manufacturer Article Number:
321.100
|
Type:
Coconut
Anabac® natural is an autoclave deodorant with 100% natural perfume, obtained from natural extracts. The ball dissolves without residue during autoclaving and the perfume is released. Autoclaving processes are not affected. Compatible with all autoclavesBiodegradableECOCERT certified according to the COSMOS standardAnabac® natural is an autoclave deodorant with 100% natural perfume, obtained from natural extracts. The ball dissolves without residue during autoclaving and the perfume is released. Autoclaving processes are not affected. Compatible with all autoclavesBiodegradableECOCERT certified according to the COSMOS standardHazardous Substance DataSDSLink
€93.60*
3M Deutschland GmbH
Biological Indicators Attest™ for Control of Steam Autoclaves
Manufacturer Article Number:
7000002535
|
Type:
Biological Indicators Attest™ for steam autoclaves, brown cap
|
UNSPSC:
41-11-30-34
Biological control involves the use of indicators, which check whether all microorganisms were killed during the sterilisation process. The bio-indicators are unique, as they directly indicate how many microbial spores have actually been killed. Thanks to the reliability and quality of the information, the regular use of a bio-indicator can lead to an improvement in the performance of the sterilisation process and thus to better results.Features:No external laboratory is required for performance evaluationEasy handlingReasonable to use after repairs or maintenance of autoclavesApplication:Program 3.5 minutes, holding time at 121 °C or 134 °CAfter sterilisation, break the vial in order to bring the nutrient solution into contact with the spore stripResults in 48 hoursMeets EN ISO 11138 standard
€393.40*
Zirbus technology GmbH
Tabletop autoclaves LabStar 25
Description:
Equipment version Basic Lab
|
Dual Use:
0
|
Manufacturer Article Number:
A1200101
Small laboratory table-top autoclave with round chamber for sterilization tasks of various kinds. A hinged lid with electromotive locking mechanism in combination with the robust lip seal ensures easy and safe closing of the sterilization chamber. A temperature lock in the liquid program prevents opening at temperatures higher than 80 °C and therefore unwanted boiling delay. For an exact control the autoclave has an electronic absolute pressure sensor and a flexible temperature sensor PT100 Kl. A.Loading capacity: 10 media bottles or 6 Erlenmeyer flasks (500 ml)Safe and simple locking deviceCompletely made of stainless steelFits on any laboratory benchEquipment versionsBasic Lab: With heating elements. For the sterilization of simple materials or liquids without dry removal.Dry Lab: With heating elements, membrane-vacuum pump. For the sterilization of non-infectious waste bags and materials which require intensive subsequent drying.Quick Lab Basic: With heating elements, water-cooling system, internal heat exchanger. For the sterilization of large quantities of liquids.Quick Lab: With heating elements, water-cooling system, internal heat exchanger, membrane-vacuum pump. For the sterilization of non-infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying.Safe Lab: With heating elements, membrane-vacuum pump, exhaust air filtration EAF. For operation in the level S2 lab. Recommended for the sterilization of infectious waste bags and materials which require intensive subsequent drying.Complete Lab: With heating elements, membrane-vacuum pump, exhaust air filtration EAF, water-cooling system, internal heat exchanger. Fully equipped laboratory autoclave for operation in the level S2 lab. Recommended for the sterilization of infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying.SpecificationsChamber volume:25 lPermissible operating pressure:3.8 bar absolutePermissible operating temperature:140 °CHeat output:2.5 kWChamber dimensions (Ø x D):300 x 360 mmOuter dimensions (W x D x H):450 x 640 x 525 mmWeight basic unit:45 kgPower supply:240 V, 50 Hz, 16 A
€8,153.00*
R. ESPINAR S.L. (Raypa)
Digital vertical autoclaves, AES series
Capacity l:
50
|
Chamber diam. x depth mm:
300 x 700
|
Dual Use:
0
|
Height mm:
1300
|
Length mm:
560
|
Manufacturer Article Number:
AES-50
|
Power W:
3200
|
Type:
AES-50
|
Width mm:
510
These autoclaves are microprocessor controlled and monitored with 10 sterilisation programmes of which 4 are fixed and 6 are freely programmable.Operating temperature range 100 °C to 134 °COn request also available with with vacuum pump and steam generatorAgar modus (40 °C to 80 °C)RS 232 interfaceTimerProgrammable auto-start (24 h)Fully automatic functionsCase and lid shrouding are AISI 304 stainless steelSterilisation chamber, lid and sealing system are AISI 316 stainless steelElectrical heating with protected heating elements in the interior of the chamberSafety pressure valveSafety thermostatAutomatic steam controlled by microprocessorManual valves for emptying the sterilisation chamber and for draining steamSupply requirements:AES-12 and AES-75: 230 V 16 A single phaseAES-110 and AES-150: 400 V + Neutral (3-phase)
€4,809.00*
Zirbus technology GmbH
Tabletop autoclaves LabStar 70
Description:
Equipment version Basic Lab
|
Dual Use:
0
|
Manufacturer Article Number:
A1240101
Laboratory table-top autoclave with round chamber for sterilization tasks of various kinds. A hinged lid with electromotive locking mechanism in combination with the robust lip seal ensures easy and safe closing of the sterilization chamber. A temperature lock in the liquid program prevents opening at temperatures higher than 80 °C and therefore unwanted boiling delay. For an exact control the autoclave has an electronic absolute pressure sensor and a flexible temperature sensor PT100 Kl. A.Loading capacity: 24 medium-flasks or 17 Erlenmeyer flasks (500 ml)Safe and simple locking deviceCompletely made of stainless steelFits on any laboratory benchEquipment versionsBasic Lab: With heating elements. For the sterilization of simple materials or liquids without removal dry.Dry Lab: With heating elements, membrane-vacuum pump. For the sterilization of non-infectious waste bags and materials which require intensive subsequent drying.Quick Lab Basic: With heating elements, water-cooling system, internal heat exchanger. For the sterilization of large quantities of liquids.Quick Lab: With heating elements, water-cooling system, internal heat exchanger, membrane-vacuum pump. For the sterilization of non-infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying.Quick Lab Advanced: With steam generator, water ring vacuum pump, water-cooling system, internal heat exchanger, air recirculation valve, steam/air mixture method (SAMM). For the sterilization of non-infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying. This also applies to liquids in closed containers.Safe Lab: With heating elements, membrane-vacuum pump, exhaust air filtration EAF. For operation in the level S2 lab. Recommended for the sterilization of infectious waste bags and materials which require intensive subsequent drying.Complete Lab: With heating elements, membrane-vacuum pump, exhaust air filtration EAF, water-cooling system, internal heat exchanger. Fully equipped laboratory autoclave for operation in the level S2 lab. Recommended for the sterilization of infectious waste bags, large quantities of liquids and materials which require intensive subsequent drying.SpecificationsChamber volume:65 lPermissible operating pressure:3.8 bar absolutePermissible operating temperature:140 °CHeat output:6.0 kWChamber dimensions (W x D x H):310 x 680 x 310 mmOuter dimensions (W x D x H):700 x 820 x 644 mmWeight basic unit:125 kgPower supply:400 V, 50 Hz, 16 A
€15,608.00*
SOCOREX ISBA SA
Sterilisation Pouches Qualitix®
Autoclavable:
Yes
|
Dimensions (WxH):
110 x 65 mm
|
Dual Use:
0
|
Height:
65 mm
|
Manufacturer Article Number:
3210.0816
|
UNSPSC:
47121701
|
Width:
110 mm
Suitable for many laboratory instruments. The disposable bags are used for simple and effective wrapping of sterilization goods that are visible through the transparent PET / CPP film. With the self-sealing strip they can be closed safely and quickly.Intended for steam and EO gas sterilizationWith two colour indicatorsRobust, durable materialWide, self-sealing stripThumb notch for easy openingISO 17665-06 and ISO 11135 conform
From
€9.83*
R. ESPINAR S.L. (Raypa)
Accessory baskets for Digital vertical autoclaves, AES series
Baskets per autoclave:
2 / 3
|
Dual Use:
0
|
For:
AES 75 - 110
|
Height mm:
280
|
Manufacturer Article Number:
CV-75
|
Type:
Mesh basket
|
Ø mm:
370
€164.00*
HMC-EUROPE GmbH
Steam sterilizers (autoclaves), HV series
Capacity l:
50
|
External dimensions (W x D x H) mm:
540 x 530 x 1040
|
Internal dimensions (Ø x H) mm:
300 x 710
|
Manufacturer Article Number:
20001
|
Power W:
2000
|
Type:
HV-L50
|
UNSPSC:
42-28-15-08
|
Weight kg:
57
|
Working Temp. range °C:
60 ... 135
Tireless, durable and ingeniously simpleCertified according to the Pressure Equipment Directive 2014/68/EUAvailable in 4 sizes with 25, 50, 85 and 110 liters of effective usable volumeSimple, reliable and with a long service life, your perfect choice for standard tasksOptionally available with flexible temperature sensor for the sterilization of liquidsFor all devices up to 110 liters only a single-phase power supply (220/240 V; 50/60 Hz) is requiredTimer function and 3 program groups with a max. of 6 programs including dissolution program, adaptions for customized programs are always possibleNo installation to a feed water supply requiredCastors for mobile useEasy to clean plastic surface with rounded edges in contact areas (no burns or injuries)Electrical, mechanical and constructional factors guarantee the highest level of quality and user protectionThe accessories make it possible to configurate the autoclave according to your wishesExhaust air filters for laboratories of safety level S2 and higher are optionally available
€8,500.00*
CertoClav Sterilizer GmbH
Accessories for Autoclaves, CertoClav
Description:
Exhaust hose
|
For:
EL, Classic, MultiControl, MultiControl 2
|
Manufacturer Article Number:
8582016
Service kit 1: with lid gasket, valve gasket, gasket for exhaust cock and manometer, steam valveService kit 2: with lid gasket, control valve gasket, seals for exhaust cock and pressure gauge, steam valve and safety valveService kit 3: with door gasket, safety valve and bacteria filter
€18.00*
PMS TIP TEKNOLOJILERI
Roll dispenser with Cutter
Description:
Roll dispenser with cutter
|
Manufacturer Article Number:
KA201
The dispenser frame is made of stainless steel and steel rods with nylone bearings for hygienic use at CSSDs. The integrated cutting unit includes an accurate and high quality cutting blade, providing safe and secure handling, as well as easy replacement. The roll dispenser and cutter is an useful addition to rotary sealing machines. It's renewed and the modular design makes it an ergonomic and economic tool which can be used as single or double rack model on working stations or just mounted on the wall.
€1,265.00*
R. ESPINAR S.L. (Raypa)
Smart vertical autoclaves, TLV series
Capacity l:
58
|
Chamber diam. x depth mm:
400 x 450
|
Dimensions (W x D x H) mm:
610 x 870 x 1000
|
Dual Use:
0
|
Manufacturer Article Number:
TLV-50
|
Power W:
3600
|
Type:
TLV-50
|
Weight kg:
140
These autoclaves are microprocessor controlled and monitored with 50 sterilisation programmes and comes with bacteriological filters included by default.Operating temperature range 100 °C to 140 °CWith with vacuum pump and steam generatorMaximum working pressure 2.6 bar (37psi)RS 232 interface, USB and WiFiTimerFully automatic functionsPT 100 temperature sensorCase and lid shrouding, stainless steelSterilisation chamber, lid and sealing system, stainless steelElectrical heating with protected heating elements in the interior of the chamberSafety pressure valveSafety thermostatAutomatic steam controlled by microprocessorPressure gauge4 casters (with brakes in two of them7" capacitive colour touch screenPower Supply: 230V 50/60 HzRemote maintenance and diagnosis via cloudRemote operation monitoring via cloudTLV: BasicTLV-FA: with Air Ballast and Fast CoolingTLV-PD: with Super Drying
€19,041.00*
SHP Steriltechnik AG
Steam sterilizers Laboklav 80
Description:
basic unit
|
Manufacturer Article Number:
21.0080.001.000
|
Type:
Laboklav 80 B
Laboklav 80 series provides an extensive and diversified range of equipment variants - customized for you laboratory application. The focus is on safe and reproducible processes, safety for the user and the environment as well as a comfortable operation of the autoclave. All steam steriliser are:suitable for the liquid sterilisation in open and lightly closed vessels, solid sterilisation and waste sterilisation at 134°Cupgradable for high demanding laboratory applicationsvolume of chamber: 80lmax. permissible pressure: 2.8barsterilising temperature: 98°C to 138°Cmotor driven and self-checking closing mechanismflexible temperature reference sensor PT100 as serial functionThermolocking device according to IEC 61010-2-40A unique installation concept for varied installation possibilities:The autoclave can be installed as vertical or as horizontal unit - without additional costs!The lid can optionally be opened to the right, to the left or backwards.All units can be delivered in three colours: red, green or blue.Numerous equipment variants:vacuum system for difficult to de-aerate solids incl. fractionated pre-vacuum and drying vacuumfast re-cooling system for liquid sterilisation using a double jacket, without rejection of demineralised waterupgrade of the re-cooling system with counter pressure and fan possible - for further reduction of batch timesoptional exhaust air filtration systemAccessories are available on request!
€16,800.00*
Ritter GmbH
Accessories for polySteribox®
Description:
Permanent filterset for polysteribox® L + XL
|
Manufacturer Article Number:
41300-0005
€14.04*
R. ESPINAR S.L. (Raypa)
Digital horizontal autoclave Type AH
Capacity l:
50
|
Chamber diam. x depth mm:
400 x 400
|
Dual Use:
0
|
Height mm:
630
|
Length mm:
780
|
Manufacturer Article Number:
AHS-50-DRY
|
Power W:
2000
|
Type:
AHS-50 DRY
|
Width mm:
760
This autoclave is microprocessor controlled and monitored with 10 sterilisation programmes of which 4 are fixed and 6 are freely selectable and has bacteriological filters included by default.Operating temperature range 100 °C to 134 °COn request, also available with B ClassRS 232 interfaceFully automatic functionsWith water reservoir, pre-vacuum and dryingCase and lid shrouding are AISI 304 stainless steelSterilisation chamber, lid and sealing system are AISI 316 stainless steelElectrical heating with protected heating elementsSafety pressure valveSafety thermostatAutomatic steam controlled by Touch Screen microprocessorManual valves for emptying the sterilisation chamber and for draining steamEquipped with mesh stand on the chamber base and traysSupply requirements: 230 V 16 A single phaseOn request also available counter-pressure, steam generator or without vacuum and drying.
€5,541.00*
PMS TIP TEKNOLOJILERI
Sterilisation rolls, flat
Dual Use:
0
|
Length:
200 m
|
Manufacturer Article Number:
FL 05200
|
Width:
50 mm
Heat-sealable sterilisation reels as a packaging solution for sterilisation applications, ensure reliable protection of the medical device against contamination with bacteria from the time of sterilisation until use of the sterile medical device. The sterilisation reels are constructed from transparent PET/PP multi-layer copolymer film and medical grade paper. Water based, non-toxic process indicators for steam and ethylene oxide sterilisation (complying with ISO 11140-1) are applied on the paper surface. This helps differentiating between processed and unprocessed packages. The sterilisation reels are effective barriers against germs and according the requirements of ISO 11607, EN 868-5 and ISO 11140-1 standards.Reinforced film to avoid tearing during openingClean and accurate indicator colour changeTear, fibre-free opening and aseptic presentationTriple band seal for higher package integrityHeat sealable sterilisation rollsHeat-sealable sterilisation reels as a packaging solution for sterilisation applications, ensure reliable protection of the medical device against contamination with bacteria from the time of sterilisation until use of the sterile medical device. The sterilisation reels are constructed from transparent PET/PP multi-layer copolymer film and medical grade paper. Water based, non-toxic process indicators for steam and ethylene oxide sterilisation (complying with ISO 11140-1) are applied on the paper surface. This helps differentiating between processed and unprocessed packages. The sterilisation reels are effective barriers against germs and according the requirements of ISO 11607, EN 868-5 and ISO 11140-1 standards.Reinforced film to avoid tearing during openingClean and accurate indicator colour changeTear, fibre-free opening and aseptic presentationTriple band seal for higher package integrityHeat sealable sterilisation rolls
From
€17.66*
HMC-EUROPE GmbH
Accessories for HG series steam sterilisers
Description:
Built-in printer HG
|
Manufacturer Article Number:
51016
€274.00*
R. ESPINAR S.L. (Raypa)
Accessories for autoclaves, TLV series
Description:
Barcode scanner
|
Dual Use:
0
|
Manufacturer Article Number:
BAR-SCAN
€114.00*
CertoClav Sterilizer GmbH
Laboratory autoclaves CertoClav Connect
Capacity l:
18
|
Manufacturer Article Number:
8510176
|
Type:
Connect
|
Weight kg:
16
|
Working Temp. range °C:
20 ... 140
Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.The fully automated, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST Test, pressure vessel test, ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. It is operated via of a 7-inch high-resolution tablet. All operating steps are explained with videos directly on the tablet. Compliance with GLP requirements through automatic documentation of users and cycles. Process protocols are stored in the CertoCloud for 10 years. Integration into laboratory data systems possible. For autoclaving liquids, a PT100-media sensor is optionally available.Scope of suppy: Autoclave, stable instrument panel with 3 feeds, minimum water level indicator, power cable, tabletSpecificationsChamber diameter:260 mmChamber depth:350 mmAir evacuation:Fractional flow procedureChamber material:Stainless steel 316LOperating pressure:2.7 barHeating capacity:1300 WPower supply:230 V ±10 % / 50 - 60 Hz* only available in conjunction with a new device
€482.00*
HMC-EUROPE GmbH
Accessories for HV series steam sterilisers
Baskets per autoclave:
3
|
Description:
Stainless steel sterilising basket for HV-50
|
Internal dimensions (Ø x H) mm:
270 x 215
|
Manufacturer Article Number:
50007
|
UNSPSC:
42-28-15-08
€240.00*
R. ESPINAR S.L. (Raypa)
Thermoprinter for automatic autoclaves
Dual Use:
0
|
Manufacturer Article Number:
IT/TS
|
Type:
Thermoprinter IT/TS
Built-in printer IT:Must be installed ex factory, please order with autoclave.For Models: AES-12, AES-28, AES-50, AES-75, AES-110, AES-150, AE-28-DRY, AE-50-DRY, AE-75-DRY, AE-110-DRY, AE-150-DRY, AHS-50-N, AHS-75-N, AH-21-L, AHS-50-DRY, AHS-75-DRYBuilt-in printer IT/TS:Must be installed ex factory, please order with autoclave.For Models: AE-50-B, AE-75-B, AE-110-B, AE-150-B, AH-21-B, AHS-50-B, AHS-75-B, AE-20-MP, AE-40-MP, AE-60-MP, AE-80-MP, AE-100-MPTable top printer ITS:Print program number, cycle number, temperature, date and hour of the run. Error messages are also printed. With RS 232 interface. Only for AES-12 / AES-28 / AES-50 / AES-75 / AES-110 / AES-150 / DRYBuilt-in printer IT/TLVMust be installed ex factory, please order with autoclave.For TLV/Series
€531.00*
SHP Steriltechnik AG
Steam steriliser LABOKLAV 55 - 195
Description:
with integrated rapid recooling and vacuum system
|
Manufacturer Article Number:
21.0100.001.005
|
Type:
LABOKLAV 100 MV
|
UNSPSC:
42-28-15-08
Steam sterilisers are availible in wide range of chamber sizes between 55 l and 195 l, universal installation options as a free-standing or tabletop unit and numerous configurations provide individual solutions meeting your specific requirements. Typical areas of application for our units include all microbiological laboratories in research institutions, universities, quality controls in the pharmaceutical and food industries as well as waste sterilization, for example in the field of medical diagnosis. Laboklav series autoclaves are characterized by their reliability and quality. We manufacture our products exclusively in Germany to high and continuously monitored quality standards. Our units are TÜV-certified and approved for series production. They comply with the following standards:Pressure Equipment Directive 97/23/EUDIN 58950: Sterilization - Steam sterilizers for pharmaceutical productsDIN 58951: Sterilization - Steam sterilizers for laboratory useNo accessories included, please inform us in your order if a horizontal or vertical device is required.Specifications55 | 100 | 135 | 160 | 195Chamber volume:55 l | 100 l | 135 l | 160 l | 195 lChamber dimensions (Diam. x D):410 x 460 mm | 410 x 760 mm | 500 x 660 mm | 500 x 760 mm | 500 x 990 mmOuter dimensions of free-standing unit (W x H x D):740 x 765 x 600 mm | 740 x 1065 x 600 mm | 840 x 965 x 700 mm | 840 x 1065 x 700 mm | 840 x 1215 x 700 mmOuter dimensions of tabletop unit (W x H x D):740 x 600 x 765 mm | 740 x 600 x 1065 mm | 840 x 700 x 965 mm | 840 x 700 x 1065 mm | 840 x 700 x 1215 mmWeight:115 kg | 185 kg | 195 kg | 210 kg | 245 kgMax. allowable pressure (PS):2,8 barMax. allowable temperature (TS):143 °CHeating power of steam generator:3-6 kW, selectable | 6 kW, selectable | 6-10 kW, selectable | 6-10 kW, selectable | 10 kWElectrical connection:3N 400 V ~, 50 Hz, 16 ASterilization temperature:98 ... 135 °C, adjustable
€14,800.00*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.32*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.*According to DIN standard
€12.32*