Quick delivery
Verfahrweg:
400 mm
|
Depth:
610 mm
|
Dimensions (WxDxH):
340 x 610 x 970 mm
|
Display:
Digital
|
Dual Use:
0
|
Height:
970 mm
|
Manufacturer Article Number:
N159010
|
Max. measured value:
10 N
|
Max. voltage:
240 V·AC
|
Measured range:
10 N
|
Min. voltage:
90 V·AC
|
Power supply:
90 ... 240 V·AC, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
TX-900
|
Type of auxiliary energy:
Mains connection
|
Weight:
27 kg
|
Width:
340 mm
Der Texturanalysator ist ein Prüfgerät zur Bestimmung der physikalischen Eigenschaften verschiedenster Stoffe und Materialien. Unter anderem lassen sich die Elastizität, das Haftvermögen und die Festigkeit von Stoffen bestimmen. In dem TX-900 können eigene Methoden programmiert und gespeichert werden. Auf dem großen Farb-Touchscreen werden Messungen direkt als Kurven angezeigt. Messergebnisse können auf einem USB-Stick exportiert und gesichert werden.Große Auswahl verschiedener PrüfkörperDisplayeinstellungen: Kraft, Geschwindigkeit, Distanz, Zeit, Temperatur, Messsensor, KraftsensorEinheiten: Gramm oder NewtonMessmodi: Penetration, Kompression, Traktion, Entspannung, TPA-ZyklusPT100-Fühler zur Temperaturmessung von -50 bis 300 °CGeschwindigkeit von 0,1 bis 10 mm/s einstellbarRS232- und USB-Schnittstelle
Display:
Digital
|
Dual Use:
0
|
Manufacturer Article Number:
FL 5
|
Material housing:
Metal
|
Max. measured value:
5 N
|
Measured range:
5 N
|
Readability:
0.002 N
|
Type:
FL 5
Universal digital force gauges with integrated measuring cell.Turnable display with backlightCan be mounted on all SAUTER test standsMetal housingSelectable measuring units: N, kN, kg, oz, lbReal time or Peak Hold Mode to observe transcients or capture peaksCapacity display: A bar lights up to show how much of the measuring range is still availableMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signalInternal memory for up to 500 measurementsContinuous analogue output: Linear voltage signal in relation to the load (-2 up to +2 V)Scope of supply: Digital force gauge, hard carrying case, 3 standard attachments (FL 2K: with external measuring cell, tension loops and pressure plates, without standard attachments)
Description:
Metal stand, vertical and horizontal positioning
|
Manufacturer Article Number:
RK-06A
Depth:
82 mm
|
Dimensions (WxDxH):
195 x 82 x 35 mm
|
Display:
Digital
|
Height:
35 mm
|
Manufacturer Article Number:
FK 500
|
Max. measured value:
500 N
|
Max. voltage:
230 V
|
Measured range:
500 N
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Readability:
0.2 N
|
Type:
FK 500
|
Weight:
0.72 kg
|
Width:
195 mm
Robust Push/Pull force gauge for simple measurement.Turnable display: automatic direction identificationSecure operability due to ergonomic designPeak-hold function to capture peaks (value is "frozen" for approx. 10 seconds) or Track function mode for a continuous measurement indicationSelectable measuring units: N, lb, kg, ozAuto-Power-OffCan be mounted on all SAUTER test standsSpecificationsPrecision:0.5 % of MaxInternal measuring frequency:1000 HzOverload protection:200 % of MaxThread:M8Dimensions (W x D x H):195 x 82 x 35 mmNet weight:approx. 0.72 kgPower supply:230 V, 50/60 Hz
Lighting:
LED, white
|
Magnification:
10x ... 140x
|
Manufacturer Article Number:
AM4115ZTL
|
Material:
Plastic
|
Resolution:
1.3 MP
|
Type:
AM4115ZTL
|
With:
LWD
Dino-Lite digital USB microscopes are powerful, portable and easy to use for many different applications in the industry and for material sciences.USB 2.0, max. 30 fpsMetall housing or plastic housingDinoCapture software for Windows / DinoXcope for MacOSEdge sensor for low image errors or vignettingAdjustable polariser for reflective objectsExtended Depth of Field (EDOF)Extended Dynamic Range (EDR)Automatic Magnification Reading (AMR)Flexible LED Control (FLC)Long Working Distance (LWD)
Dual Use:
0
|
Lighting:
LED, white
|
Magnification:
10x ... 70x, 200x
|
Manufacturer Article Number:
AM4113ZT
|
Material:
Plastic
|
Resolution:
1.3 MP
|
Type:
AM4113ZT
|
With:
-
Dino-Lite digital USB microscopes are powerful, portable and easy to use for many different applications in the industry and for material sciences.USB 2.0, max. 30 fpsMetall housing or plastic housingDinoCapture software for Windows / DinoXcope for MacOSAdjustable polariser for reflective objectsLong Working Distance (LWD)
Verfahrweg:
200 mm
|
Depth:
610 mm
|
Dimensions (WxDxH):
340 x 610 x 710 mm
|
Display:
Digital
|
Dual Use:
0
|
Height:
710 mm
|
Manufacturer Article Number:
N151050
|
Max. measured value:
50 N
|
Max. voltage:
240 V·AC
|
Measured range:
50 N
|
Min. voltage:
90 V·AC
|
Power supply:
90 ... 240 V·AC, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
TX-700
|
Type of auxiliary energy:
Mains connection
|
Weight:
25 kg
|
Width:
340 mm
The Texture Analyzer TX-700 is a test instrument for the determination of the physical properties of various substances and materials. E.g. the elasticity, the adhesiveness and the strength of substances can be measured. The following parameters can be determined: penetration, relative compression, TPA cycle, traction and relaxation. The TX-700 is ideal for your consistent, elastic and adhesive products.Wide selection of different test specimensDisplay settings: force, speed, distance, time, sensitivityUnits: grams or NewtonMeasurement modes: penetration, compression, traction, relaxation, TPA cycleIncludes PT100 for temperature controlLanguage French, English, Russian, SpainConnections for RS-232, USBSpecificationsSensors / Resolution:10 N (1 kg) / 0.001 N (0.1 g)
20 N (2 kg) / 0.001 N (0.1 g)
50 N (5 kg) / 0.001 N (0.1 g)
250 N (20 kg) / 0.01 N (1 g)
500 N (50 kg) / 0.01 N (1 g)Accuracy:± 0.05 % of full scaleSpeed range:0.1 to 10 mm/s ± 0.2 %Motion Height / Resolution:370 mm / 0,01 mmTemperature range:-20 to +120 °CDimensions (L x W x H):300 x 500 x 600 mmWeight:21 kgPower supply:90-240 VAC, 50/60 Hz
Variants from €10,268.00*
Manufacturer Article Number:
130080
|
Type:
Probe, plate, stainless steel 316L
|
Ø mm:
34
Description:
Trinocular
|
Manufacturer Article Number:
1100100402042
|
Type:
BA310 MET
The BA310 MET series is the ideal microscope for industrial quality inspection or material science. Different alternative stand options also allow applications in brightfield or examination of larger samplesInfinity Optics [CCIS®]Observation Tube Trinocular 30° (Light split 100:00/20:80), F.N. 20Interpupillary distance 48-75mmWidefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces and rubber eyecupsReversed quintuple revolving nosepieceCCIS LM Plan Achromatic objectives 5X, 10X, 20X, 50XCoaxial course and fine focusing systemMechanical stage 180x140mm, hard coated with built-in low position coaxial stage controlEpi-illuminator 12V/50W quartz halogen with integrated field and aperture diaphragms and external lamphousePower supply 100-240V (CE)Power cord, Allen hexagonal key, vinyl dust coverBA310 MET-T:Coaxial course and fine focusing system, course focusing system adjustableTransmitted illumination of 6V/30W Quartz Halogen Koehler illumination with intensity controlBlue, frosted, green and yellow filtersInterchangeable LED modul for transmitted light available
Variants from €34.65*
Lighting:
LED, white
|
Magnification:
20x ... 220x
|
Manufacturer Article Number:
WF4515ZT
|
Material:
Plastic
|
Resolution:
1.3 MP
|
Type:
WF4515ZT
|
With:
AMR, FLC
Dino-Lite digital USB microscopes are powerful, portable and easy to use for many different applications in the industry and for material sciences.USB 2.0, max. 30 fpsMetall housing or plastic housingDinoCapture software for Windows / DinoXcope for MacOSEdge sensor for low image errors or vignettingAdjustable polariser for reflective objectsExtended Depth of Field (EDOF)Extended Dynamic Range (EDR)Automatic Magnification Reading (AMR)Flexible LED Control (FLC)Wireless operation with adapter WF-20 (incl.)
Description:
Trinocular
|
Manufacturer Article Number:
1100103800158
|
Type:
AE2000 MET
The AE2000 MET series is the ideal microscope for industrial quality inspection and material science. Different objective options allow applications in brightfield & darkfield or examination of larger samples.Infinity Optics [CCIS®]Observation Tube Siedentopf Type, Trinocular-/Phototube 45°, F.N. 20, 360° swivellingInterpupillary Distance 48-75 mmEyepieces High-Eyepoint N-WF 10x/20 mm with diopter adjustment on both eyepieces and rubber eyecupsSide facing quintuple nosepieceObjectives CCIS LM Plan achromat DIN 5X, 10X, 20X, 50XM32 with adapters to W 4/5" x 1/36" (RMS standard)Mechanical stage 280 x 192 mm surface with metal round and oval stage insertsX and Y range of 50 x 50 mmExternal lamphouse, Illumination 12 V/100 W halogen with intensity control and sleeping modeUniversal power supply 100-240 V (CE)Blue filter, Allen hexagonal key, vinyl dust cover and power cord
Variants from €46.20*
Depth:
65 mm
|
Dimensions (WxDxH):
30 x 65 x 120 mm
|
Frequency:
5 MHz
|
Height:
120 mm
|
Manufacturer Article Number:
TD 225-0.1US
|
Measuring head:
Ø 8 mm
|
Measuring range mm:
1.2 ... 225
|
Power supply:
4 x 1,5 V AAA
|
Readability mm:
0.1
|
Width:
30 mm
Selectable measuring units: mm, inchData interface RS-232Battery operationScope of supply:Ultrasonic thickness gauge, base plate for adjustment, external sensor, carrying casePrecision:0.5 % of measured value or ±0.1 mmNet weight:approx.164 g
Lighting:
LED, 395 nm UV / white
|
Magnification:
10x ... 70x, 200x
|
Manufacturer Article Number:
AM4113T-FVW
|
Material:
Plastic
|
Resolution:
1.3 MP
|
Type:
AM4113T-FVW
Dino-Lite digital USB microscopes are powerful, portable and easy to use for many different applications in the industry and for material sciences.USB 2.0, max. 30 fpsMetall housing or plastic housingDinoCapture software for Windows / DinoXcope for MacOSLED lights switchable
Depth:
25 mm
|
Dimensions (WxDxH):
60 x 25 x 115 mm
|
Display:
Analogue
|
Height:
115 mm
|
Manufacturer Article Number:
HBD 100-0
|
Material housing:
Metal
|
Max. measured value:
100 HD
|
Measured range:
100 HD
|
Readability:
1,0 HD
|
Tolerance:
3 %
|
Type:
HBD 100-0
|
Weight:
160 g
|
Width:
60 mm
Shore hardness testers for hardness determination of plastics through penetration measurementTypical application: Measurement of penetration depth (Shore).Material thickness of the sample, min. 4 mmParticularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are not possible because of very narrow standard tolerancesCan be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)Shore A for rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materialsShore A0 for foams, spongesShore D for plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.Compact handheld durometer for plastics with drag indicator.Max mode: Holds the maximum value in the displayPoint mode: Shows one instant valueScrews to screw on to the TI: M7 fine threadDelivered in a plastic carrying case
Variants from €121.00*
Description:
Trinocular
|
Dual Use:
0
|
Manufacturer Article Number:
1100104600252
|
Type:
TEC POL
Powerful polarisation microscope for all material sciences. Maximum flexibility for all applications in polarisation microscopy, suitable for transparent as well as opaque samples from the education sector and industrial quality assurance.Tube type Siedentopf, swivelingWidefield oculars for spectacle wearers with diopter adjustment on both ocularsCCIS® Plan achromatic objectives UC PL (strain-free)Reversed coded nosepiece with single centering holesBertrand lens and slot for compensatorsFocusable and centerable Achromat Swing-out Abbe condenser N.A. 0.90/0.13 (strain-free) and rotatable polariserIllumination acc. to Köhler, with interchangeable illuminatorMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorCoaxial coarse and fine focusing system with tension adjustmentCompact, built-in mechanical stageIntegrated power supply with sleep modeVisual camera outputUSB 2.0 for external camera powerScope of supply: Microscope, dust cover, power cord, Allen key, blue filter, halogen bulb, LED module, adjustable key for nosepiece, interference color chart, screws for metal extension supportSpecificationsInclination Tube:25°Angle of rotation Tube:360°Eyepieces:Widefield UC-WF10X/22 mmNosepiece:QuintupleObjectives:4X/0.1 (AA 30.5 mm), 10X/0.25 (AA 17.4 mm), 40X/0.65/S (AA 0.6 mm), 60X/0.8/S (AA 0.35 mm)Interpupillary distance:
Trinocular light split:48 ... 75 mm
Fixed 50:50Condenser:N.A. 0.90/0.13 Abbe-CondenserIllumination:3 W LEDs / 30 W HalogenFine focus increment:
Focusing stroke:2 µm
25 mmDimensions Stage (W x D):
Stage size (Ø):1 increment, 0.1 skale
160 mmDimensions (W x D x H):410 x 300 x 395 mmNet weight:9.8 kgPower supply:110 ... 240 V, 50 / 60 Hz
Depth:
82 mm
|
Dimensions (WxDxH):
132 x 82 x 31 mm
|
Display:
Digital
|
Dual Use:
0
|
Height:
31 mm
|
Manufacturer Article Number:
HK-D
|
Material housing:
Metal
|
Max. measured value:
960 HL
|
Measured range:
170 ... 960 HL
|
Min. measured value:
170 HL
|
Readability:
1 HL
|
Tolerance:
1 %
|
Type:
HK-D
|
Type of auxiliary energy:
Battery
|
Weight:
450 g
|
Width:
132 mm
The Leeb hardness tester measures metallic samples and offers mobility and flexibility compared to stationary tabletop devices and testing devices with internal sensor.External impact sensorAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 600 data groupsMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (Type A, B, C), Vickers (HV), Shore (HS), Leeb (HL), Brinell (HB)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmedAcoustic and visual signalMatrix display: Backlit multi-function displayRobust metal housingScope of supply:HK-D: Mobile Leeb hardness tester, hard carrying caseHK-DB: Mobile Leeb hardness tester, hard carrying case, standard block for calibration, hardness approx. 800 HLDSpecificationsMeasuring range:170 ... 960 HLReadability:1 HL
Depth:
74 mm
|
Dimensions (WxDxH):
150 x 74 x 32 mm
|
Dual Use:
0
|
Frequency:
5 MHz
|
Height:
32 mm
|
Manufacturer Article Number:
TN 230-0.01US
|
Measuring head:
Ø 10 mm
|
Measuring range mm:
1,2 ... 230
|
Power supply:
2 x 1,5 V AA
|
Readability mm:
0,01
|
Width:
150 mm
Scan mode (10 measurements per sec.) or single point measuring modeInternal memory for up to 20 files (with up to 100 values per file)Selectable measuring units: mm, inchBattery operationUSB data interfaces as standard (for models with readout 0.01 mm)Scope of supply:Ultrasonic thickness gauge, external sensor, carrying case
Variants from €630.00*
Description:
7 plates for Shore A, tolerance up to ±2 HA
|
Manufacturer Article Number:
AHBA-01
Variants from €86.00*
Dual Use:
0
|
Lighting:
LED, white, coaxial
|
Magnification:
700x ... 900x
|
Manufacturer Article Number:
AM7515MT8A
|
Material:
Metal
|
Resolution:
5.0 MP
|
Type:
AM7515MT8A
|
With:
AMR, FLC
Dino-Lite digital USB microscopes are powerful, portable and easy to use for many different applications in the industry and for material sciences.USB 2.0, max. 30 fpsMetall housing or plastic housingDinoCapture software for Windows / DinoXcope for MacOSEdge sensor for low image errors or vignettingAutomatic Magnification Reading (AMR)Flexible LED Control (FLC)
Variants from €786.45*
Depth:
36 mm
|
Dimensions (WxDxH):
66 x 36 x 230 mm
|
Display:
Digital
|
Height:
230 mm
|
Manufacturer Article Number:
FH 2
|
Max. measured value:
2 N
|
Measured range:
2 N
|
Plug type:
EU
|
Readability:
0,001 N
|
Type of auxiliary energy:
Rechargeable battery
|
Weight:
0.64 kg
|
Width:
66 mm
Universal digital force gauges for tension and compression tests with integrated measuring cell.Turnable display with backlightDigital force gauge with internal sensorData interface RS-232Selectable measuring units: N, lb, kgPeak-Hold function to capture peaks (measurement result will be "frozen" for a short time) or Track function mode for a continuous measurement indication (period of time approx. 10 s)Function to set limits, programming of Max./ Min., in pull and push direction, with output of acoustic and optical signal. Ideal mode for efficient and accurate testing of standard partsAuto-Power-OffInternal memory for up to 10 measurementsMini Statistics Kit: calculates the average result from up to ten stored single results, min., max., nCan be mounted on all SAUTER test standsScope of supply:Force gauge, carrying caseSpecificationsResolution:up to 10,000 points (total measuring range)Internal measuring frequency:0.5 % of MaxInternal measuring frequency:2000 HzOverload protection:150 % of MaxThread:M6Dimensions (W x D x H):66 x 36 x 230 mmNet weight:approx. 0.64 kgPower supply:Battery powered, internal
Depth:
65 mm
|
Dimensions (WxDxH):
131 x 65 x 28 mm
|
Height:
28 mm
|
Manufacturer Article Number:
TE 1250-0.1FN
|
Measuring range µm:
100/1250
|
Power supply:
4 × 1,5 V AAA
|
Readability:
0,1/1 µm
|
Width:
131 mm
For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, mlAuto-Power-OffBattery operationData interface RS-232Scope of supply: Coating thickness gauge, external sensor, base plate, calibration foils, carrying casePrecisionStandard:3 % of measured value or ± 2,5 µmOffset-Accur:1 % of measured value or ± 1 µmMinimal base thickness:0.3 mm
Depth:
65 mm
|
Dimensions (WxDxH):
126 x 65 x 35 mm
|
Height:
35 mm
|
Manufacturer Article Number:
TG 1250-0.1FN
|
Measuring range µm:
100/1250
|
Power supply:
2 × 1,5 V AAA
|
Readability:
0,1/1 µm
|
Width:
126 mm
For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying casePrecisionStandard:3 % of measured value or ± 2,5 µmOffset-Accur:1 % of measured value or ± 1 µmMinimal base thickness:0.3 mm
Display:
Digital
|
Dual Use:
0
|
Manufacturer Article Number:
TVL 500FHS71
|
Max. measured value:
500 N
|
Measured range:
500 N
|
Readability:
0,1 N
|
Type:
TVL 500FHS71
|
Weight:
10 kg
For tensile and compressive force measurement. The set consists of test stand TVL, digital force gauge FH 500, 2 x screw clamp AE 500, threaded pin AFM 20.
Depth:
65 mm
|
Dimensions (WxDxH):
162 x 65 x 38 mm
|
Display:
Digital
|
Dual Use:
0
|
Height:
38 mm
|
Manufacturer Article Number:
HDA 100-1
|
Material housing:
Plastic
|
Max. measured value:
100 HA
|
Measured range:
100 HA
|
Readability:
1,0 HA
|
Shore hardness:
A
|
Tolerance:
1 %
|
Type:
HDA 100-1.
|
Type of auxiliary energy:
Battery
|
Weight:
173 g
|
Width:
162 mm
Shore hardness testers for hardness determination of plastics through penetration measurementTypical application: Measurement of penetration depth (Shore).Material thickness of the sample, min. 4 mmParticularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are not possible because of very narrow standard tolerancesCan be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)Shore A for rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materialsShore A0 for foams, spongesShore D for plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.Compact handheld durometer for plastics with digital display.Large display with backlightSelectable: AUTO-OFF function or continuous operation, charge indicatorDelivered in a hard carrying case
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.32*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.32*