Manufacturer Article Number:
0105500
|
Material:
SAN
|
Nominal capacity:
1000 ml
|
Standard:
DIN 12672
|
Type of closure:
Screw cap
|
With stopcock:
No
Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.
30%
Height:
40 mm
|
Int. Ø:
8 mm
|
Manufacturer Article Number:
645001
|
Material:
Cellulose
|
Type:
MN 645
|
UNSPSC:
41104817
|
Wall thickness:
1,0 mm
Fat determination in food and feedDetermination of binder content in asphaltAnalysis of soil contaminantsDetermination of additives in rubber and elastomers
30%
Height:
50 mm
|
Int. Ø:
15 mm
|
Manufacturer Article Number:
649103
|
Material:
Glass fiber (GF)
|
Max. temperature resistance:
500 °C
|
Type:
MN 649
|
UNSPSC:
41104817
|
Wall thickness:
1,0 mm
Pollution monitoring, air samplingHigh temperature filtration (up to 500 °C)For solvents incompatible with cellulose thimbles (for example strong acids or bases)
Depth:
300 mm
|
Dimensions (WxDxH):
150 x 300 x 294 mm
|
Height:
294 mm
|
Manufacturer Article Number:
0105600
|
No. of sedimentation cones:
2
|
Width:
150 mm
Acrylic/PP. To hold two Imhoff sedimentation cones. Compact and easy to transport even when fully loaded.
26%
For:
Nickel
|
Manufacturer Article Number:
91305
|
Measuring range:
10 ... 1000 mg/l Ni2+
For semi-quantitative determinations.* Test strips with reagent** Box with 60 test strips and reagent*** CE-marked according to the directive for medical products 93/42/EWG.
Variants from €17.85*
25%
Accuracy:
±0.01 NTU or ±2 % of measured value
|
Battery/rechargeable battery:
4 x 1.5 V, AA
|
Depth:
170 mm
|
Designation ANSI:
AA
|
Dimensions (WxDxH):
82 x 170 x 236 mm
|
Height:
236 mm
|
IP code:
IP 67
|
Illuminants:
Infrared LED
|
Interfaces:
RS 232
|
Manufacturer Article Number:
600321
|
Max. measured value:
1100 NTU
|
Max. voltage battery/rechargeable battery:
1.5 V
|
Measured range:
0 ... 1,100 NTU
|
Min. measured value:
0 NTU
|
No. of batteries/rechargeable batteries:
4
|
Resolution:
0.01 NTU (0.02 ... 9.99 NTU), 0.1 NTU (10 ... 99.90 NTU), 1 NTU (100 ... 1100 NTU)
|
Standard:
DIN EN ISO 7027-1
|
Type:
Turb® 430 IR/SET
|
Type of auxiliary energy:
Battery
|
Weight:
0.6 kg
|
Width:
82 mm
The turbidity meters Turb® 430 IR acc. to DIN ISO 27027 and Turb® 430 T acc. to US EPA 180.1 meet the requirements of the nephelometric measurement at 90° stray light for drinking water with highest precision, especially in the range < 1 NTU. The measuring range comprises 0-1100 NTU/FNU with automatic measuring range switching and is therefore suitable for water analysis as well as quality control, such as gasoline, cell cultures, as well as in the food and beverage industries.The measurement and automatic 3-point calibration runs self-explanatory and menu-controlled. The calibration takes place via an AMCO Clear® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata. The quality assurance of the measured results is supported by calibration interval setting with documentation.Scope of supply: Turbidity meter in case with table insert, calibration set 0.02-10.0-1000 NTU, PC software LSdata, accessories
Manufacturer Article Number:
03.2265
|
Type:
Micro III
|
UNSPSC:
41103903
Small centrifuge for the determination of fat in milk and dairy products acc. to Gerber or Babcock.Microprocessor control with actual display in minutes and seconds, adjustable from 1 to 99 minutesHeating with 2 segment advertisements, adjustable from 0 to 65 ° CIncreased precision thanks to the controlled speedUnbalance shwitch-off in case of uneven filling or sudden glass breakageIncl. Rotor (aluminium) and bushing (brass)Small centrifuge for the determination of fat in milk and dairy products acc. to Gerber or Babcock.Microprocessor control with actual display in minutes and seconds, adjustable from 1 to 99 minutesHeating with 2 segment advertisements, adjustable from 0 to 65 ° CIncreased precision thanks to the controlled speedUnbalance shwitch-off in case of uneven filling or sudden glass breakageIncl. Rotor (aluminium) and bushing (brass)
Depth:
180 mm
|
Description:
2 channels, with SenTix® 940, TetraCon® 925
|
Dimensions (WxDxH):
80 x 180 x 55 mm
|
Height:
55 mm
|
IP code:
IP 67
|
Interfaces:
USB-A, Mini USB-B
|
Manufacturer Article Number:
2FD56C
|
Max. voltage:
240 V
|
Min. voltage:
100 V
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
Multi 3620 SET C
|
Type:
Multi 3620 Set C
|
Type of auxiliary energy:
Mains connection/rechargeable battery
|
Width:
80 mm
Professional digital multiparameter meters for mobile measurement, wireless preparation, data logger manually or automatically (timed). Easy to clean with a soft brush under water jet. The Multi 3620 IDS with two universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to cable or wireless. Documentation of meter and sensor data. User control over MultiLab® users. With USB-A and Mini USB-B interface and colour display.Scope of supply: Meter in a carrying case with IDS sensors (digital pH sensor SenTix® 940, digital conductivity cell TetraCon® 925), QSC Kit, buffer 4 and 7, conductivity standard, stand, beaker, CD-ROM, batteries, cables, power supply, arming SM Pro
Description:
Test tubes 2.0 ml with ring mark
|
Manufacturer Article Number:
05.5020
Variants from €41.72*
For tests:
50
|
Manufacturer Article Number:
931210
|
Measuring range:
0,5 - 15 mg/l NH4+
|
Type:
Ammonium 15
|
UNSPSC:
41-11-61-16
All test kits are qualified for the analysis of seawater.Hazardous Substance DataUNNR3316
Variants from €26.10*
Description:
Chlorine LR / pH
|
Manufacturer Article Number:
151600
|
Measuring range:
0.1-3 mg/l / 6.8-8.2
|
Type:
AF 105
|
UNSPSC:
41-11-61-17
The Pooltester is designed for the simultaneous determination of the most popular water treatment agents and the pH value. Each pool tester contains tablets in foil for every 20 analyzes and a multilingual user manual.Hazardous Substance DataSDSLink
Ground size:
NS14/23
|
Manufacturer Article Number:
386038
|
Manufacturer Article Number:
386038 VE
|
Material:
Soda-lime glass
|
Nominal capacity:
150 ml
For the determination of oxygen dissolved in water. The measured volume is specified to two decimal places. White withe inscription field. Solid, obliquely cut NS glass stopper can be secured with a fastening clip. Each flask is calibrated with its own stopper. Stoppers and flasks are therefore not interchangeable. The bottle and stopper each have the same device number.
Battery/rechargeable battery:
1 x CR2450
|
Description:
1 x measuring head grey, 1 x measuring head blue, 2 sample bottles, 2 rubber quivers,2 magnetic stirring rods
|
Designation IEC:
CR2450
|
IP code:
IP 54
|
Manufacturer Article Number:
208264
|
Max. measured value:
4000 mg/l
|
Max. pressure:
1250 hPa
|
Measured range:
0 ... 4,000 mg/l
|
Measuring time:
7 d
|
Min. measured value:
0 mg/l
|
Min. pressure:
500 hPa
|
No. of batteries/rechargeable batteries:
1
|
Pressure:
500 ... 1,250 hPa
|
Type:
OxiTop®-i Set 2
|
Type:
OxiTop®-i Set 2
|
Type of auxiliary energy:
Battery
Menu-operated measuring heads. Output of the BOD measurement values directly on the display.3 operating buttonsBacklit graphic LCDControl LEDVolume pre-selectionMeasurement duration selectable (1 to 7 days)Display of measuring curveDisplay of current readingsScope of supply: 1 x measuring head grey, 1 x measuring head blue, 2 sample bottles, 2 rubber quivers, 2 magnetic stirring rods
Manufacturer Article Number:
B00179003
|
No. of sedimentation cones:
2
Imhoff pattern, solid grey PVC. Stable design.
For:
Chlorine
|
Manufacturer Article Number:
511231BT
|
Type:
DPD (Ness) No. 1
|
UNSPSC:
41-11-61-17
Hazardous Substance DataSDSLink
Variants from €53.02*
Manufacturer Article Number:
209713
|
Max. measured value:
4000 mg/l
|
Max. pressure:
1250 hPa
|
Max. voltage:
240 V
|
Measured range:
0 ... 4,000 mg/l
|
Measuring time:
180 d
|
Min. measured value:
0 mg/l
|
Min. pressure:
500 hPa
|
Min. voltage:
100 V
|
No. of measuring positions:
12
|
Nominal volume bottle:
510 ml
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Pressure:
500 ... 1,250 hPa
|
Type:
OxiTop®-IDS Set 12
|
Type of auxiliary energy:
Battery/mains connection
These tests quantify the biological degradability of chemicals.With the proven Bluetooth® connectivity and the convenient operation via MultiLine® multi parameter instrument Multi 3620 IDS or Multi 3630 IDS. Using a Multi 3620 IDS or Multi 3630 IDS in BOD special mode the BOD measuring range extends to 400000 mg/l. For an already existing Multi 3620 or 3630 IDS, a firmware update is sufficient. Herewith beneath the OxiTop® applications also measurement of pH, conductivity, solved oxygen and turbidity are available. All heads can be used independently for routine BOD measurements from 1 to 7 days.Respirometric degradability tests according to OECD 301F/DIN EN ISO 9408Versatile measurement by using the BOD special modeMeasurement duration selectable (0.5 hours to 180 days)Bluetooth® connectivityDirect calculation of all results in the meterRepresentation of curves for monitoringParallel measurement of different examinations and methodsExport to data acquisition programsPlease order CO2 absorber NHP 600 (9.303 403) separately.The IDS multi parameter measuring instruments Multi 3620 IDS Set WL or Multi 3630 IDS Set WL are required. Please order separately.OxiTop®-IDS Set 12 also for BOD self-monitoring measurementsScope of supply: 12 x OxiTop®-IDS measuring heads, 12 x bottles PF600 (510 ml), 12 x rubber sleeves, nitrification inhibitor, overflow measuring flask, 12 x magnetic stirring bars, stirring bar retriever, stirring platform IS 12
Battery/rechargeable battery:
3 x C, AlMn
|
Depth:
230 mm
|
Description:
with 6 bottles, GLP conformity
|
Designation ANSI:
C
|
Dimensions (WxDxH):
181 x 230 x 375 mm
|
Electrochemical system:
AlMn
|
Height:
375 mm
|
IP code:
IP 51
|
Manufacturer Article Number:
2444461
|
Max. voltage:
240 V
|
Measuring time:
28 d
|
Min. voltage:
100 V
|
No. of batteries/rechargeable batteries:
3
|
No. of measuring positions:
6
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
BD 600 GLP
|
Type:
BD 600 GLP
|
Type of auxiliary energy:
Battery/mains connection
|
Width:
181 mm
Die BSB Bestimmung ist ein wichtiges Instrument zur Ermittlung des Einflusses von häuslichen und industriellen Abwässern auf Kläranlagen und Vorfluter. Das Sensorsystem BD 600 ermöglicht die exakte und komfortable Bestimmung des Biochemischen Sauerstoffbedarfs (BSB) nach dem respirometrischen Prinzip. Der verbrauchte Sauerstoff wird hierbei über eine Druckminderung im geschlossenen BSB-Messsystem ermittelt. Durch den Einsatz moderner Drucksensoren kann auf die Verwendung schädlichen Quecksilbers gänzlich verzichtet werden. Das Messsystem BD 600 erfasst unabhängig von der Messdauer jede Stunde einen Messwert. Auf diese Weise lässt sich frühzeitig die Qualität einer Messreihe beurteilen. Sowohl Momentanwerte als auch gespeicherte Werte können jederzeit abgefragt werden. Gespeicherte Werte werden wahlweise numerisch oder grafisch angezeigt. Das Gerät ist fernbedienbar. Nach dem Start einer Messreihe werden die BSB-Messwerte in regelmäßigen Zeitintervallen automatisch gespeichert. Diese können jederzeit in mg/l BSB auf dem großen Display angezeigt werden ohne dass ein umständliches Umrechnen über Faktoren erforderlich ist. So können auch Messreihen, die beispielsweise an einem Sonntag enden, problemlos in der folgenden Woche ausgewertet werden. Die Messreihen können auf einem Speichermedium (USB-Stick, SD-Karte) in einer Datei gespeichert, bzw. per USB-Kabel übertragen werden und auf einem Computer weiter ausgewertet werden.Für unterschiedliche Anwendungen ist der Messzeitraum frei zwischen 1 und 28 Tagen wählbar. Während Kurzzeitmessungen für wissenschaftliche Anwendungen von Nutzen sind, erstrecken sich reguläre BSB-Messung über einen Zeitraum von 5 Tagen. Eine respirometrische Messung über einen Zeitraum von 28 Tagen kommt beispielsweise bei der OECD Bestimmung zum Zuge.Messprinzip: Respirometrischer, elektronischer DrucksensorMessbereiche: 0 - 40, 0 - 80, 0 - 200, 0 - 400, 0 - 800, 0 - 2000, 0 - 4000 mg/l O2Einsatzgebiete: BSB 5/ BSB F/ OECD301FGLP konformLieferumfang: BD 600, komplett mit 6 Sensoren und Steuerungseinheit mit BatterienNetzteil inkl. Y-Kabel zur gemeinsamen Stromversorgung des BD 600 und des RührsystemsInduktiv-Magnetrührsystem6 Probenflaschen6 Köcher6 Rührstäbe1 Überlaufmesskolben, 157 ml1 Überlaufmesskolben, 428 ml1 Flasche, 50 ml Kaliumhydroxid-Lösung1 Flasche, 50 ml Nitrifikationshemmstoff1 BedienungsanleitungFernbedienung
Depth:
265 mm
|
Dimensions (WxDxH):
250 x 265 x 310 mm
|
Display:
Digital
|
Height:
310 mm
|
Manufacturer Article Number:
F105A0117
|
Max. speed:
300 1/min
|
Max. voltage:
240 V
|
Min. speed:
10 1/min
|
Min. voltage:
100 V
|
No. of stirring positions:
4
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Speed:
10 ... 300 1/min
|
Type:
FP 4
|
Type of auxiliary energy:
Mains connection
|
Weight:
3.8 kg
|
Width:
250 mm
|
With timer:
Yes
The digital flocculator was specially designed for coagulation and flocculation determinations in water treatment analysis. The practical handle makes it possible to carry out tests in real time in the laboratory or on site. The device can be powered by a car cigarette lighter or plugged into the power grid. The speed and timer (1 min to 99 h 59 min) can be easily set using the ergonomic rotary knob and LED display. The robust brushless motor delivers precise and reproducible stirring speeds and thanks to SpeedServo™ torque compensation technology, the speed remains constant even if the viscosity of the sample changes. The central illumination system improves sample visibility during the flocculation process and makes it easier to observe results in real time. Stainless steel stirring rods are adjustable in height.
Manufacturer Article Number:
209731
|
Max. measured value:
4000 mg/l
|
Max. pressure:
1250 hPa
|
Measured range:
0 ... 4,000 mg/l
|
Measuring time:
180 d
|
Min. measured value:
0 mg/l
|
Min. pressure:
500 hPa
|
No. of measuring positions:
6
|
Nominal volume bottle:
1000 ml
|
Pressure:
500 ... 1,250 hPa
|
Type:
OxiTop®-IDS B6M
|
Type of auxiliary energy:
Battery
Respirometric measuring system for 6 measuring heads for determination of aerobic soil respiration, OxiTop®-IDS B6M-2.5 acc. to AT4 guideline. These sets are suitable for forecast, survey and monitoring of clean-up operations as well as measurement of bio-degradation of pesticides, fungicides, insecticides and fertilizers for example.With the proven Bluetooth® connectivity and the convenient operation via MultiLine® multi parameter instrument Multi 3620 IDS or Multi 3630 IDS. Using a Multi 3620 IDS or Multi 3630 IDS in BOD special mode the BOD measuring range extends to 400000 mg/l. For an already existing Multi 3620 or 3630 IDS, a firmware update is sufficient. Herewith beneath the OxiTop® applications also measurement of pH, conductivity, solved oxygen and turbidity are available. All heads can be used independently for routine BOD measurements from 1 to 7 days.Bluetooth® connectivityDirect calculation of all results in the meterRepresentation of curves for monitoringParallel measurement of different examinations and methodsExport to data acquisition programsMeasurement duration selectable (0.5 hours to 180 days)Please order CO2 absorber NHP 600 (9.303 403) separately.The IDS multi parameter measuring instruments Multi 3620 IDS Set WL or Multi 3630 IDS Set WL are required. Please order separately.Scope of supply: 6 measuring heads, 6 vessels MG 1,0 (1000 ml), 6 adapters OxiTop® AD/SK
Manufacturer Article Number:
05.25700
|
Type:
C1
For easy and quick determination of the freezing point of milk acc. to ISO 5764/IDF 108.Extremely quiet operationOperation via user-friendly touch screenEasy calibration thanks to comprehensible menu navigationCooling system with heat pipe (without water cooling)Dust filter to protect the cooling systemData output to external printer and/or PC selectableCryoscope C1:Manual for single samplesCryoscope C1A:Automat for 12 samplesScope of supply: Cryoscope, standard solution 408 (250 ml), standard solution 512 (250 ml), standard solution 600 (250 ml), Heat transfer fluid (250 ml), 10 test tubes 2.0 ml with ring marks, operating manual, country-specific power cableMeasuring range:0 ... -1000 m°C/m°HResolution:0.1 m°C/m°HRepeatability:±2 m°C/m°HTest time:90 s (time mode 30 s)Sample volume:2.0 ml or 2.5 mlAmbient temperature:15 ... 35 °CDimensions (W x D x H):280 × 420 × 320 mmWeight:11 kgPower supply:110 ... 240 V, 50/60 Hz
Height:
80 mm
|
Int. Ø:
30 mm
|
Manufacturer Article Number:
645220
|
Material:
Cellulose
|
Type:
MN 645 D
|
UNSPSC:
41104817
Extraction thimbles are used for holding solid materials, from which certain substances are to be extracted with a suitable solvent. Additionally, extraction thimbles are used in the fields of air and waste gas analysis for collecting solid particles. With lid.
Depth int.:
680 mm
|
Ext. depth:
654 mm
|
Ext. height:
1684 mm
|
Ext. width:
600 mm
|
External dimensions (WxDxH):
600 x 654 x 1,684 mm
|
Height int.:
1460 mm
|
Int. width:
475 mm
|
Internal dimensions (WxDxH):
475 x 680 x 1,460 mm
|
Manufacturer Article Number:
2438260
|
Material interior:
Plastic
|
Max. no. of inserts:
4
|
Max. temperature:
40 °C
|
Max. voltage:
240 V
|
Min. temperature:
2 °C
|
Min. voltage:
220 V
|
Nominal capacity:
288 l
|
Plug type:
EU
|
Power supply:
220 ... 240 V, 50 Hz
|
Power supply frequency:
50 Hz
|
Temperature:
2 ... 40 °C
|
Type:
TC 715 G
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104400
|
Weight:
72 kg
The incubators from Lovibond® are designed for continuous tempering for different applications, mainly for the determination of BOD, the storage of wastewater samples, and the determination of enzymatic activity. The temperature range is +2°C up to +40°C and can be regulated in steps of 0,1°C. Temperature tolerance is defined with +/- 1°C respectively +/- 0,5°C (at 20°C). Low engergy consumption due to reinforced isolation. The interior of the cabinets is equipped with sockets for connecting stirrers. Illuminated LED display with actual / setpoint display.Temperature range 2 °C to 40 °C, continuously adjustable in steps of 0.1 °CLow power consumptionIlluminated LED display of preset and current temperaturesWith natural refrigerant R600aIdeal for BOD determination at 20 °CPower sockets inside the incubatorThe incubators from Lovibond® are designed for continuous tempering for different applications, mainly for the determination of BOD, the storage of wastewater samples, and the determination of enzymatic activity. The temperature range is +2°C up to +40°C and can be regulated in steps of 0,1°C. Temperature tolerance is defined with +/- 1°C respectively +/- 0,5°C (at 20°C). Low engergy consumption due to reinforced isolation. The interior of the cabinets is equipped with sockets for connecting stirrers. Illuminated LED display with actual / setpoint display.Temperature range 2 °C to 40 °C, continuously adjustable in steps of 0.1 °CLow power consumptionIlluminated LED display of preset and current temperaturesWith natural refrigerant R600aIdeal for BOD determination at 20 °CPower sockets inside the incubator
Variants from €2,421.30*
Description:
RESPIROMETRIC Sensor System 6 BOD without Databox™
|
Manufacturer Article Number:
SB10200146
Measuring systems for the reliable determination of 90 to 4000 ppm BOD, BOD5 and BOD7 for the control of water and wastewater quality.Complete with sensor heads and multi-position magnetic stirring station for performing aerobic and anaerobic respiration tests. Measurement data is transmitted wirelessly from the RESPIROMETRIC sensor head to a PC via the Databox™. The Databox™ can store results from up to 48 RESPIROMETRIC sensors. With the RESPIROSoft™ software, these measurement data can be evaluated and monitored on the PC. Alternatively, the Databox™ can be connected to the Velp Ermes cloud platform. After registration, measurement data can also be monitored and analysed from mobile devices.4-digit LED display2-button user interfaceResults available in BOD (mg/l) and pressure (mbar)Automatic conversion of pressure results into BODWireless transmission of data to the PC (Wlan)Scope of supply: 6-position magnetic stirring station, 6 x sensor heads incl. batteries, 6 x 500 ml amber bottles, 6 x KOH containers, 6 x magnetic stirring barsBOD range:90 ... 4000 ppmPressure range:500 ... 2000 mbarMeasuring period:5 ... 30 daysDimensions sensor (W x D x H):50 x 70 x 70 mmDimensions stirring station (W x D x H):270 x 185 x 300 mmWeight sensor:80 gWeight stirring station:1 kgPower supply sensor:2 x CR 2430Power supply stirring station:230 V, 50 ... 60 HzIP code:IP54
Description:
Reference oil
|
Manufacturer Article Number:
05542650
|
UNSPSC:
15-12-19-00
Plant-based reference oil for calibration and adjustment of the cooking oil tester. To do this, simply immerse the measuring device in the reference oil heated to 50 °C while in calibration mode. The displayed measured value can be compared and noted or the device can be adjusted to this value. Bottle with 100 ml content.Hazardous Substance DataSDSLink
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €13.34*