Conductivity standards tested and ISO 17025 certified at 25 °C. Uncertainty of measurement of ± 1%. Directly traceable to N.I.S.T. Temperature dependence data is printed on the label as are lot numbers and expiry dates. Supplied in 500 ml HDPE bottle. 1.3 µS/cm in 250 ml bottle. Calibration values 84, 147, 1413, 12880 µS/cm. Control Values 1.3 - 350000 µS/cm.Hazardous Substance DataSDSLink

Sturdy and economical, ease-of-use with high performance. The handy meter is IP54 splashproof, and comes with a conductivity electrode with automatic temperature compensation function.5-point-calibration with ±1 % full scale accuracyOption of quick, easy automatic calibration or customised, near-to-sample manual calibrationAuto-Ranging for conductivity measurements for fast response and best resolution over wide measurement rangeEasy-to-read displayAutomatic switch-offScope of supply: Conductivity meter, conductivity electrode CONSEN91B, electrode holder Grip-Clip, batteries

The Elite CTS pocket tester simultaneously displays conductivity/TDS/salinity with temperature. Available with Pin sensor. With leakproof, transparent wide-base cap for upright standing with fill line indicator.1-push calibrationLarge 4-digit double line displayBacklit graphic displayAuto-hold readingsEasy-to-operate, intuitive keypadAuto-offScope of supply: Tester incl. batteries, lanyard

Waterproof and rugged conductivity meter with manual or automatic ranging options. Suitable for water and wastewater treatment, e.g. drinking water treatment, aquariums and fish farms, swimming pools and agriculture.User-replaceable SS316 stainless steel sensor elementECTestr® 11+ with cup electrodeUp to 3 measuring rangesUp to 3 calibration points with auto/manual optionAutomatic or manual ranging capabilitiesWith temperature displayCalibration settings remain, even when you run out of batteriesWaterproof and dustproof housingLarge LCD display

The Elite CTS pocket tester simultaneously displays conductivity/TDS/salinity with temperature. Available with Pin sensor. With leakproof, transparent wide-base cap for upright standing with fill line indicator.1-push calibrationLarge 4-digit double line displayBacklit graphic displayAuto-hold readingsEasy-to-operate, intuitive keypadAuto-offScope of supply: Tester incl. batteries, lanyard, soft carry case, CTS conductivity standard sachets (5 x 1413 µS/cm KCl and 5 x 2764 µS/cm KCl)

The Elite CTS pocket tester simultaneously displays conductivity/TDS/salinity with temperature. Available with Cup sensor. With leakproof, transparent wide-base cap for upright standing with fill line indicator.1-push calibrationLarge 4-digit double line displayBacklit graphic displayAuto-hold readingsEasy-to-operate, intuitive keypadAuto-offScope of supply: Tester incl. batteries, lanyard, soft carry case, CTS conductivity standard sachets (5 x 1413 µS/cm KCl and 5 x 2764 µS/cm KCl)

Waterproof and rugged conductivity meter with manual or automatic ranging options. Suitable for water and wastewater treatment, e.g. drinking water treatment, aquariums and fish farms, swimming pools and agriculture.User-replaceable SS316 stainless steel sensor elementECTestr® 11 with pin electrodeWith 2 measuring rangesWith 2 calibration pointsAutomatic or manual ranging capabilitiesWith temperature displayCalibration settings remain, even when you run out of batteriesWaterproof and dustproof housingLarge LCD display

These economy Conductivity meters offer years of reliable, accurate and consistent performance. User-friendly features make the instrument an ideal research partner in laboratories, production plants and schools.Large screen that displays conductivity or TDS readings with temperature in °C or °FReady indicator lets you know when readings are stableSelectable cell constantAuto-ranging across 5 conductivity and TDS rangesIntegral electrode holderExtended memory holds up to 500 data points, time and date-stamped for GLP complianceReplatinization in 5 minutes with the built-in replanitization circuitIndication of necessary recalibrationAuto-logging function for convenient continuous monitoringPassword protection for setup and calibrationSalinity and Resistivity measurementsScope of supply: Meter with integral electrode holder, 4-cell conductivity/ATC electrode

Best value for a waterproof conductivity meter.Large, three line LCD, view conductivity or TDS measurement with temperature as well as cell efficiencyBuilt-in memory function, stores up to 150 measurements along with temperatureAdjustable temperature coeffcient, set to 0.0 % to meet USP methods for non-compensated measurementsAcoustic indication of necessary recalibrationPower with AA batteries or use optional AC adapterCalibrate using automatically recognized standards or manually, to a single point across all ranges or to multiple points (one calibration point per each conductivity range)Ready indicator, manual or automatic measurement hold feature and optional automatic shut-off functionAdjustable conductivity-to-TDS conversion factor, from 0.4 to 1.0Includes innovative Grip-Clip™, quickly and easily secures the electrode to your beaker or containerScope of supply: Meter, conductivity cell (K =1.0), Grip Clip™, 2 x AA batteries, hard carry case, calibration solutions (1 x 1413 µS, 12.88 mS, 84 µS KCL Standard Solutions and 1 x Deionised (Rinse) Water, 60 ml each)

Disposable bags for effective calibration. Traceability according to NIST. Hazardous Substance DataSDSLink

Best value for a waterproof conductivity meter.Large, three line LCD, view conductivity or TDS measurement with temperature as well as cell efficiencyBacklit displayBuilt-in memory function, stores up to 500 data sets, USB and RS232 outputAdjustable temperature coeffcient, set to 0.0 % to meet USP methods for non-compensated measurementsAcoustic indication of necessary recalibrationPower with AA batteries or use optional AC adapterCalibrate using automatically recognized standards or manually, to a single point across all ranges or to multiple points (one calibration point per each conductivity range)Ready indicator, manual or automatic measurement hold feature and optional automatic shut-off functionAdjustable conductivity-to-TDS conversion factor, from 0.4 to 1.0Includes innovative Grip-Clip™, quickly and easily secures the electrode to your beaker or containerBuilt-in real-time clock stamps stored data and calibration data with time and date, meets standards for GLP (Good Laboratory Practices)Scope of supply: Meter, conductivity cell (K =1.0), Grip Clip™, 2 x AA batteries, hard carry case, calibration solutions (1 x 1413 µS, 12.88 mS, 84 µS KCL Standard Solutions and 1 x Deionised (Rinse) Water, 60 ml each), USB cable

2-electrode measuring cell made of PP with Ultem housing and stainless steel rings. For fast and precise conductivity and temperature measurements in the field and laboratory. With 8-pin connector. Suitable for devices COND 610, COND 600, CD 650, PC 650 and PCD 650.

2-electrode measuring cell made of PP with Ultem housing and stainless steel rings. For fast and precise conductivity and temperature measurements in the field and laboratory. With 6-pin connector. Suitable for devices CON 510, CON 400, CON 410, PC 300, PC 510, CON 11 and CON 110.

Sturdy and economical, ease-of-use with high performance. The handy meter is IP54 splashproof, and comes with a conductivity electrode with automatic temperature compensation function.5-point-calibration with ±1 % full scale accuracyOption of quick, easy automatic calibration or customised, near-to-sample manual calibrationAuto-Ranging for conductivity measurements for fast response and best resolution over wide measurement rangeEasy-to-read displayAutomatic switch-offScope of supply: Conductivity meter, conductivity electrode CONSEN91B, 1 x each 84 μS/cm, 1413 μS/cm and 12.88 mS/cm KCl calibration solution, 1 x deionised rinse water, electrode holder Grip-Clip, batteries, hard carrying case

2-electrode measuring cell made of PP with Ultem housing and stainless steel rings. For fast and precise conductivity and temperature measurements in the field and laboratory. With BNC and phono connector. Suitable for devices COND 6+, TDS 6+ and Salt 6+.

The Elite CTS pocket tester simultaneously displays conductivity/TDS/salinity with temperature. Available with Cup sensor. With leakproof, transparent wide-base cap for upright standing with fill line indicator.1-push calibrationLarge 4-digit double line displayBacklit graphic displayAuto-hold readingsEasy-to-operate, intuitive keypadAuto-offScope of supply: Tester incl. batteries, lanyard

For accurate measurement of conductivity, TDS, and salinity in one single instrument, making it an ideal solution for many applications.Large 4 digit double line displayDisplay of battery life, status and re-calibrationAutomatic temperature compensation (ATC)Auto conductivity buffer recognition and calibrationSelectable TDS factor: 0.40 to 1.00Auto offSpecificationsConductivity range:0.00 … 20.00 mS/cmResolution:10 µS/cm below 2.00 mS/cm, 0.10 mS/cm above 2.00 mS/cmAccuracy:±2 % full scale ±1 LSDTDS range:0 … 20000 ppmResolution:10 ppm below 2000 ppm, 100 ppm above 2000 ppmAccuracy:±2% full scale ±1 LSDSalinity range: Resolution: Accuracy:0 … 10000 ppm 100 ppm ±2 % of full scale ±1 LSDCalibration points:1 per parameterTemperature range: Resolution: Accuracy:0 … 50 °C 0.1 °C ±0.5 °C + 1 digitOperating temperature:5 … 45 °CDimensions (W x L x H): Weight:45 x 170 x 30 mm 90 gPower supply:Incl. 4 batteries (A76 or LR44 equivalent)IP code:IP 67Warranty:1 year

Compact conductivity meter for easy measurement of conductivity, salinity, and TDS.Large 5" LCD display with backlight1- to 5-point calibration (conductivity and TDS)1-point calibration (salinity)Calibration with automatic standard recognition or manual entryAutomatic or manual temperature compensation and 1-point temperature calibrationMemory for up to 500 data pointsEasy data export with supplied PC cableWith electrode stand for easy positioning of the probe in the sampleLogs with date and time stamp for GLP-compliant workScope of supply: Conductivity meter, electrode stand, PC cable, universal power supply with plug adapter EU, UK, AUS, US, and China

Compact conductivity meter for easy measurement of conductivity, salinity, and TDS.Large 5" LCD display with backlight1- to 5-point calibration (conductivity and TDS)1-point calibration (salinity)Calibration with automatic standard recognition or manual entryAutomatic or manual temperature compensation and 1-point temperature calibrationMemory for up to 500 data pointsEasy data export with supplied PC cableWith electrode stand for easy positioning of the probe in the sampleLogs with date and time stamp for GLP-compliant workScope of supply: Conductivity meter, electrode stand, conductivity electrode CONSEN9501D, conductivity standard 1413 µS/cm, PC cable, universal power supply with plug adapter EU, UK, AUS, US, and China

Four-electrode sensor made of stainless steel with a wide measuring range and Memosens technology for laboratory and random sample measurement in the field. Ideal for measurements where a broad conductivity measurement range in one system is needed. Memosens technology is based on true Plug & Play for minimised downtime. Measured values, calibration data, and history are stored directly in the sensor. Memosens offers absolutely secure data transmission and thus ensures increased availability of the measuring point and trouble-free processes. In addition, the inductive Memosens coupling is insensitive to moisture and corrosion.Solid platinum electrodes provide easy maintenance and long lifetimeIntegrated Pt1000 temperature sensor for automatic temperature compensationPrecise adjustment and reliable measurement with a quality cerificate indicating the individual cell constantEasy to clean thanks to seamless designSupports quality management requirements with tamper-proof data storage including serial number and calibration historyThe sensor is supplied pre-calibrated and ready for immediate use.

The meter kits are suitable for measuring the conductivity of samples and can be used in a wide range of laboratory areas.Conductivity meter SD30 with large 7" touch screen and Intelligent Sensor Management (ISM®)Conductivity sensor InLab® 741-ISM with stainless steel shaft and NTC 30 kΩ temperature sensor. The 2-pole measuring cell made of stainless steel is particularly suitable for measuring samples with low conductivityScope of supply: Conductivity meter SevenDirect™ SD30, electrode arm EasyPlace™, conductivity sensor InLab® 741-ISM, 2 conductivity standard sachets 84 µS/cm, protective cover, power supply, get-started-guide

The meter kits are suitable for measuring the conductivity of samples and can be used in a wide range of laboratory areas.Conductivity meter SD30 with large 7" touch screen and Intelligent Sensor Management (ISM®)Conductivity sensor InLab® 731-ISM with epoxy shaft and NTC 30 kΩ temperature sensor. The 4-pole measuring cell made of graphite eliminates polarisation effects and ensures high linearity over a wide conductivity rangeScope of supply: Conductivity meter SevenDirect™ SD30, electrode arm EasyPlace™, conductivity sensor InLab® 731-ISM, 2 x 2 conductivity standard sachets 1413 µS/cm and 12.88 mS/cm, protective cover, power supply, get-started-guide