Manufacturer Article Number:
0139600
|
UNSPSC:
40151502
Connection:
Tube connection
|
Manufacturer Article Number:
0139500
|
Material:
PP
|
UNSPSC:
40151502
|
Ultimate pressure:
9804 mbar
This pump will work on pressures up to 10 kg/cm². With built-in, non-return valve to eliminate back flow. Useful for vacuum removal of spilt chemicals, as well as for filter work. Easily dismantled for cleaning. Ø water tube 11.85 mm, Ø vacuum tube 9 mm.
Description:
R 3/8"
|
Manufacturer Article Number:
159665
|
UNSPSC:
41121815
Variants from €5.06*
Flow rate per stroke:
36 ml
|
Manufacturer Article Number:
6132-0020
With PVC casing. Vacuum of approx. 86 mbar can be achieved and maintained. With outlet valve with detachable cover and separate vacuum release lever. Tubing connection nozzle fits tubing with an internal diameter of 6.4 mm. Supplied with 60 cm length of clear plastic tubing. Can be disassembled for repair or replacement of internal parts.
Flow rate per stroke:
15 ml
|
Manufacturer Article Number:
6131-0010
With PVC casing. Vacuum of approx. 86 mbar can be achieved and maintained. With outlet valve with detachable cover and separate vacuum release lever. Tubing connection nozzle fits tubing with an internal diameter of 6.4 mm. Supplied with 60 cm length of clear plastic tubing.
For:
N 86 KT.18, N 816.3 KT.18
|
Manufacturer Article Number:
000360
|
Type:
G1/8 ID6 PA
|
UNSPSC:
41-10-51-08
Connection pressure side:
G1/8"
|
Connection suction side:
KF DN 16
|
Depth:
224 mm
|
Dimensions (WxDxH):
158 x 224 x 231 mm
|
Flow rate:
3 m³/h
|
Height:
231 mm
|
Manufacturer Article Number:
142030V430+80010
|
Max. voltage:
230 V
|
Noise level:
54 db(A)
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
SCROLLVAC 3S plus
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
0.1 mbar
|
Ultimate vacuum with gas ballast:
0.15 mbar
|
Weight:
8 kg
|
Width:
158 mm
The oil-free, dry-compressing vacuum pump works on the principle of a scroll compressor and combines a high pumping speed with a good ultimate vacuum. Ideal for small laboratories as well as applications in research and development. The integrated exhaust valve provides effective protection against a rapid pressure rise in the event of a power failure. Additional system protection is provided by the solenoid inlet valve with delay relay, which isolates the pump from the system and preserve the vacuum inside the system.Powerful, dry-operating alternative to diaphragm pumpsCan be operated horizontally or verticallyCompact design with low weightMax. pump speed of 3 m3/hCarrying handle facilitates transport of the pumpBuild-in manual gas ballastLong maintenance intervals due to oil-free operation, low maintenanceLow vibration and quiet operation
Variants from €4,132.10*
Connection pressure side:
KF DN 16
|
Connection suction side:
KF DN 25
|
Depth:
623 mm
|
Dimensions (WxDxH):
320 x 623 x 298 mm
|
Flow rate:
40 m³/h
|
Height:
298 mm
|
IP code:
IP 42
|
Manufacturer Article Number:
161040V22
|
Max. permitted ambient temperature:
40 °C
|
Max. voltage:
240 V
|
Min. permitted ambient temperature:
5 °C
|
Min. voltage:
200 V
|
Noise level:
52 db(A)
|
Power supply:
200 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
ECODRY 40 plus
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
0.03 mbar
|
Weight:
43 kg
|
Width:
320 mm
The dry-compressing multi-stage roots vacuum pump was specially developed for applications that require short pump down times, low noise levels, low vibration, and no particulate generation, such as analytical instruments, research laboratories, and light industrial processes. The friction-free operating principle protects its components from any wear, and all components are designed for an operating life of up to five years. During this time, maintenance measures such as replacing seals or changing the oil are not required. The pump is also air-cooled and therefore requires no connection to a water supply for cooling.Integrated castors make it easier to transport the pumpSilencers and integrated acoustic insulation ensure a very low noise levelClean vacuum generation without contaminating the workplace and recipient thanks to the oil-free suction chamber and contact-free rotorsHigh water vapour toleranceManual operation with integrated switchRemote controlled via digital I/O interface from costumer systemComputer-controlled via RS485/MODBUS
Variants from €12,830.00*
38%
Connection pressure side:
KF DN 16
|
Connection suction side:
KF DN 16
|
Flow rate:
3.2 m³/h
|
IP code:
IP 54
|
Manufacturer Article Number:
140000
|
Max. permitted ambient temperature:
40 °C
|
Max. voltage:
230 V
|
Min. permitted ambient temperature:
10 °C
|
No. of stages:
2
|
Noise level:
47 db(A)
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
TRIVAC D 2,5 E
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41105109
|
Ultimate vacuum:
0.002 mbar
|
Weight:
16.1 kg
The oil-sealed, two-stage rotary vane pump is suitable for industrial standard applications.Small, compact designLow oil back streamingHigh water vapour compatibilitySuitable for continuous operation at 1000 mbarHigher performance thanks to a 3-stage gas ballast deviceLow noise level
For:
N 938.50 KT.18, N 920 G
|
Manufacturer Article Number:
007006
|
UNSPSC:
40151502
Variants from €15.12*
Connection pressure side:
KF DN 25
|
Connection suction side:
KF DN 25
|
Depth:
298 mm
|
Dimensions (WxDxH):
432 x 298 x 312 mm
|
Flow rate:
10.6 m³/h
|
Height:
312 mm
|
IP code:
IP 42
|
Manufacturer Article Number:
141010V10
|
Noise level:
55 db(A)
|
Type:
SCROLLVAC 10 plus
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
0.009 mbar
|
Weight:
25 kg
|
Width:
432 mm
The oil-free, dry-compressing vacuum pump works on the principle of a scroll compressor and is characterised by high pumping speed, with low ultimate pressure, low power consumption and low noise level. Ideal for general laboratory, light industrial, research, and chemical applications. The gas ballast enables the pumping of condensable vapours, including water, solvents, dilute acids, and bases. Absolute separation of the bearings from the pump mechanism prevents contamination. The integrated smart drive with auto sensing voltage input ensures optimised pump performance worldwide.Compact design with low weightControl panel for convenient control of the pump with remote control interfaceRunning time hours-counter included as standardUniversal voltage drive (100 to 127 V/200 to 240 V, 50/60 Hz)High water vapour capacityLow noise level for a quiet working and laboratory environmentLow-maintenance, simple seal replacement (maintenance kits can be ordered separately)ATEX-certified (Ex II 3 G c IIB T4)The oil-free, dry-compressing vacuum pump works on the principle of a scroll compressor and is characterised by high pumping speed, with low ultimate pressure, low power consumption and low noise level. Ideal for general laboratory, light industrial, research, and chemical applications. The gas ballast enables the pumping of condensable vapours, including water, solvents, dilute acids, and bases. Absolute separation of the bearings from the pump mechanism prevents contamination. The integrated smart drive with auto sensing voltage input ensures optimised pump performance worldwide.Compact design with low weightControl panel for convenient control of the pump with remote control interfaceRunning time hours-counter included as standardUniversal voltage drive (100 to 127 V/200 to 240 V, 50/60 Hz)High water vapour capacityLow noise level for a quiet working and laboratory environmentLow-maintenance, simple seal replacement (maintenance kits can be ordered separately)ATEX-certified (Ex II 3 G c IIB T4)
Variants from €5,908.00*
Connection pressure side:
KF DN 25
|
Connection suction side:
KF DN 25
|
Depth:
298 mm
|
Dimensions (WxDxH):
432 x 298 x 312 mm
|
Flow rate:
14.5 m³/h
|
Height:
312 mm
|
IP code:
IP 42
|
Manufacturer Article Number:
141015V12
|
Noise level:
55 db(A)
|
Type:
SCROLLVAC 15 C plus
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
0.009 mbar
|
Weight:
26 kg
|
Width:
432 mm
The oil-free, dry-compressing vacuum pump works on the principle of a scroll compressor and is characterised by high pumping speed, with low ultimate pressure, low power consumption and low noise level. Ideal for general laboratory, light industrial, research, and chemical applications. The gas ballast enables the pumping of condensable vapours, including water, solvents, dilute acids, and bases. Absolute separation of the bearings from the pump mechanism prevents contamination. The integrated smart drive with auto sensing voltage input ensures optimised pump performance worldwide.Compact design with low weightControl panel for convenient control of the pump with remote control interfaceRunning time hours-counter included as standardUniversal voltage drive (100 to 127 V/200 to 240 V, 50/60 Hz)High water vapour capacityLow noise level for a quiet working and laboratory environmentLow-maintenance, simple seal replacement (maintenance kits can be ordered separately)ATEX-certified (Ex II 3 G c IIB T4)Specially developed for aggressive applications. By using purge gas, the SCROLLVAC C plus can be configured to process corrosive solvents and chemicals without any problems.Chemical resistant exhaust check valve and gas ballast valveStainless steel inlet and exhaust flanges
Manufacturer Article Number:
159600
|
Material:
PP
|
Max. temperature:
80 °C
|
UNSPSC:
40151502
|
Ultimate pressure:
16 mbar
|
Water consumption:
220 l/h
With constant ultimate vacuum, high suction flow rate and very low water consumption. Can be connected to mains water system in a number of different ways using the adapter supplied and reducing adapters that are available as accessories. For continuous use at temperatures up to 80 °C max. High chemical resistance as the media being pumped only comes into contact with PP, FKM and PTFE. Integral non-return valve increases safety. Length approx. 210 mm.Scope of supply: Water jet pump, water connections (R ¾" sleeve nut, R ½" reducing adapter and flexible tubing connection (nozzle) with external diameter from 10 mm to 12 mm), suction line connection (detachable nozzle with external diameter from 6 mm to 9 mm, GL 14 screw cap)
Connection size:
G 3/8
|
Manufacturer Article Number:
6140-0010
|
UNSPSC:
41-10-51-01
For generating a vacuum. Connects directly to a standard faucet via the 3/8" NPT threaded connection. Operates at low water pressure for minimal water consumption.Built-in check valveIncludes 12 cm PE tubing
Connection pressure side:
ID 10 mm
|
Connection suction side:
ID 10 mm
|
Depth:
312 mm
|
Dimensions (WxDxH):
154 x 312 x 207 mm
|
Flow rate:
20 l/min
|
Height:
207 mm
|
Manufacturer Article Number:
309577/026366
|
Material media contact:
PTFE/FFPM
|
Max. overpressure:
1 bar
|
Max. permitted ambient temperature:
40 °C
|
Min. permitted ambient temperature:
5 °C
|
Type:
N 820.3 FT.18
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
8 mbar
|
Width:
154 mm
Application: Fluid aspiration, Degassing, Gel drying, Rotary evaporation, Centrifugal concentration, DistillationHigh level of vapor and condensate compatibilityPTFE pump head combined with PTFE-coated diaphragm are ideal for extremely aggressive/corrosive gases and vaporsIn accordance with ATEX II 2/-G IIB+H2 T3 Gb internal atmosphere only
Connection pressure side:
ID 10 mm
|
Connection suction side:
ID 10 mm
|
Depth:
341 mm
|
Dimensions (WxDxH):
167 x 341 x 223 mm
|
Flow rate:
34 l/min
|
Height:
223 mm
|
Manufacturer Article Number:
057634/042382
|
Material media contact:
PTFE/FFPM
|
Max. overpressure:
1 bar
|
Max. permitted ambient temperature:
40 °C
|
Min. permitted ambient temperature:
5 °C
|
Type:
N 842.3 FT.18
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
2 mbar
|
Width:
167 mm
Application: Fluid aspiration, Degassing, Gel drying, Rotary evaporation, Centrifugal concentration, DistillationHigh level of vapor and condensate compatibilityPTFE pump head combined with PTFE-coated diaphragm are ideal for extremely aggressive/corrosive gases and vaporsApplication: Fluid aspiration, Degassing, Gel drying, Rotary evaporation, Centrifugal concentration, DistillationHigh level of vapor and condensate compatibilityPTFE pump head combined with PTFE-coated diaphragm are ideal for extremely aggressive/corrosive gases and vapors
Connection pressure side:
ID 10 mm
|
Connection suction side:
ID 8 ... 9,5 mm
|
Depth:
260 mm
|
Dimensions (WxDxH):
323 x 260 x 416 mm
|
Flow rate:
20 l/min
|
Height:
416 mm
|
IP code:
IP 30
|
Manufacturer Article Number:
325234/313452
|
Max. permitted ambient temperature:
40 °C
|
Max. voltage:
240 V
|
Min. permitted ambient temperature:
5 °C
|
Min. voltage:
100 V
|
Plug type:
EU
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
60 W
|
Type:
SH 820 G
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
6 mbar
|
Weight:
11.7 kg
|
Width:
323 mm
Vacuum pump systems consisting of chemically resistant diaphragm vacuum pump, base plate, inlet separator and outlet condensor for solvent recovery. The PTFE pump head and the PTFE-coated diaphragm make the vacuum systems suitable for aggressive / corrosive gases and vapours.100 % oil-free transferHigh level of vapor and condensate compatibilityIntegrated gas ballast valve3-color status display (in operation / stand-by / error)Integrated speed controlStart against ultimate vacuum of the pumpModular expandable
Connection pressure side:
ID 9/10 mm
|
Connection suction side:
ID 9/10 mm
|
Depth:
259 mm
|
Dimensions (WxDxH):
163 x 259 x 220 mm
|
Flow rate:
20 l/min
|
Height:
220 mm
|
Manufacturer Article Number:
317121/313452
|
Material media contact:
PTFE/PTFE-coated/FFPM
|
Max. permitted ambient temperature:
40 °C
|
Max. voltage:
240 V
|
Min. permitted ambient temperature:
5 °C
|
Min. voltage:
100 V
|
Plug type:
EU/UK/CH
|
Power supply:
100 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Type:
N 820 G
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
6 mbar
|
Weight:
8.8 kg
|
Width:
163 mm
The compact pumps feature a control knob for manual adjustments of the flow rate, making them well suited to a wide variety of applications, e.g. rotary evaporation, distillation, gel drying, degassing as well as the use with vacuum ovens and vacuum concentrators. Due to the manual rotational speed control, the pumps are quiet, very energy efficient, and can be optimally adjusted in accordance with the application.Easy-to-clean surfaceAdjustable in flow rate due to manual rotational speed controlCombination of PTFE pump head and PTFE-coated diaphragm makes the pump ideal for extremely aggressive/corrosive gases and vaporsHigh level of compatibility with vapor and condensationIntegrated gas ballast valve3-color status display: In operation / Stand-by / ErrorATEX-compliant in accordance with II 2/-G IIB+H2 T3 internal atmpsphere only100% oil-free transfer to ensure uncontaminated transfer, evacuation and compressionOptional: Easily expandable with separators and/or condensers
Connection pressure side:
ID 10 mm
|
Connection suction side:
ID 8 ... 9,5 mm
|
Depth:
260 mm
|
Dimensions (WxDxH):
282 x 260 x 234 mm
|
Flow rate:
20 l/min
|
Height:
234 mm
|
IP code:
IP 30
|
Manufacturer Article Number:
325236/313452
|
Max. permitted ambient temperature:
40 °C
|
Max. voltage:
240 V
|
Min. permitted ambient temperature:
5 °C
|
Min. voltage:
100 V
|
Plug type:
EU/UK/CH
|
Power supply:
100 ... 240 V
|
Rated capacity:
60 W
|
Type:
SR 820 G
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
6 mbar
|
Weight:
10.7 kg
|
Width:
282 mm
Vacuum pump system, consisting of chemically resistant diaphragm vacuum pump, base plate and two separator flasks on suction and pressure side, for filtrations, degassings fluid aspirations centrifugal concentrations and vacuum ovens. The PTFE pump head and the PTFE-coated diaphragm make the vacuum systems suitable for aggressive / corrosive gases and vapours.100 % oil-free transferHigh level of vapor and condensate compatibilityIntegrated gas ballast valve3-colour status display (in operation / stand-by / error)Integrated speed controlStart against ultimate vacuum of the pumpModular expandable
Connection pressure side:
ID 10 mm
|
Connection suction side:
ID 10 mm
|
Depth:
324 mm
|
Flow rate:
21 l/min
|
Manufacturer Article Number:
U302473/057334
|
Material media contact:
PPS/PTFE-coated/FFPM
|
Max. voltage:
115 V
|
Plug type:
US
|
Power supply:
115 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Type:
U N 920 G
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
2 mbar
|
Ultimate vacuum with gas ballast:
5.0 mbar
|
Width:
158 mm
Application: Degassing, Gel drying, Rotary evaporation, DistillationFlow rate 1.26 m³/h / Ultimate vacuum 2 mbar abs.High suction speed, particularly in the low vacuum rangeIntegrated rotational speed control enables pumping capacity to be easily adapted manually to process requirementsPPS pump head combined with PTFE-coated diaphragm are ideal for aggressive/corrosive gases and vaporsIntegrated gas ballast valveTip: When combined with the VC 900 vacuum control unit and the connection cable, the rotational speed is controlled in accordance with the requirements of the process.
Variants from €2,903.00*
Connection pressure side:
ID 10 mm
|
Connection suction side:
ID 10 mm
|
Depth:
312 mm
|
Dimensions (WxDxH):
177 x 312 x 220 mm
|
Flow rate:
20 l/min
|
Height:
220 mm
|
Manufacturer Article Number:
312295/026366
|
Material media contact:
PTFE/PTFE-coated/FFPM
|
Max. overpressure:
1 bar
|
Max. permitted ambient temperature:
40 °C
|
Max. voltage:
230 V
|
Min. permitted ambient temperature:
5 °C
|
Power supply:
230 V, 50 Hz
|
Power supply frequency:
50 Hz
|
Type:
N 820.3 FT.40.18
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
10 mbar
|
Weight:
9.6 kg
|
Width:
177 mm
Application: Rotary evaporation, Distillation, Vacuum oven, Centrifugal concentrationIntegrated KNF self-drying system ensures that condensate is quickly removed from the pump heads without the vacuum being altered. This significantly reduces process time and preserves the pump heads.Chemically resistant and thus ideal for use with extremely aggressive/corrosive gases and vapors
Connection pressure side:
ID 10 mm
|
Connection suction side:
ID 8 ... 9,5 mm
|
Depth:
260 mm
|
Dimensions (WxDxH):
347 x 260 x 416 mm
|
Flow rate:
20 l/min
|
Height:
416 mm
|
IP code:
IP 30
|
Manufacturer Article Number:
329849/338082
|
Max. permitted ambient temperature:
40 °C
|
Max. voltage:
240 V
|
Min. permitted ambient temperature:
5 °C
|
Min. voltage:
100 V
|
Plug type:
EU/UK/CH
|
Power supply:
100 ... 240 V
|
Rated capacity:
60 W
|
Type:
SC 820 G
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
6 mbar
|
Weight:
13.35 kg
|
Width:
347 mm
Vacuum pump systems consisting of chemically resistant diaphragm vacuum pump, base plate, separator on suction side, high performance condenser on pressure side and vacuum controller for rotary evaporations, distillations and vacuum ovens. Automatic, accurate recognition and monitoring of the boiling point using the integrated ramp function.High recovery ratesWireless controller via Bluetooth for safe operation from outside closed fume hoodsEasy, intuitive control via touchscreen display and rotation knobIntegrated gas ballast valveFour operating modesIntegrated speed controlATEX compliant to (Ex) II 3/-G Ex h IIB+H2 T3 Gc internal atmosphere only
Connection pressure side:
ID 12 mm
|
Connection suction side:
ID 12 mm
|
Depth:
331 mm
|
Dimensions (WxDxH):
291 x 331 x 278 mm
|
Flow rate:
60 l/min
|
Height:
278 mm
|
Manufacturer Article Number:
049625/049661
|
Material media contact:
PTFE/PTFE-coated/FFPM
|
Max. overpressure:
1 bar
|
Max. permitted ambient temperature:
40 °C
|
Max. voltage:
230 V
|
Min. permitted ambient temperature:
5 °C
|
Power supply:
230 V, 50 Hz
|
Power supply frequency:
50 Hz
|
Type:
N 860.3 FT.40.18
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41-10-51-01
|
Ultimate vacuum:
4 mbar
|
Weight:
14.8 kg
|
Width:
291 mm
Application: Rotary evaporation, distillation, vacuum oven, centrifugal concentrationFlow rate 3.6 m³/h / ultimate vacuum 4 mbar abs.Integrated KNF self-drying system ensures that condensate is quickly removed from the pump heads without the vacuum being altered. This significantly reduces process time and preserves the pump headsChemically resistant and thus ideal for use with extremely aggressive/corrosive gases and vapors
Connection pressure side:
ID 6 mm
|
Connection suction side:
ID 6 mm
|
Flow rate:
30 l/min
|
Manufacturer Article Number:
U120678/120692
|
Max. overpressure:
0.5 bar
|
Max. voltage:
115 V
|
Plug type:
US
|
Power supply:
115 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Type:
U N 938.50 KT.18
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
40151502
|
Ultimate vacuum:
15 mbar
For filtration, degassing desiccation, liquid extraction and solid phase extraction.N 938.50 KT.18 ensures exceptionally fast evacuation by the parallel and in series connection of both pump headsPTFE-coated diaphragm is ideal for aggressive/corrosive gases and vaporsPump head made from PPS (Polyphenylsulfide), valves made from FFPM (Perfluoro rubber)
Variants from €1,542.00*