23%
Cooling system:
Peltier modules
|
Depth int.:
250 mm
|
Ext. depth:
506 mm
|
Ext. height:
704 mm
|
Ext. width:
585 mm
|
External dimensions (WxDxH):
585 x 506 x 704 mm
|
Height int.:
320 mm
|
Int. width:
400 mm
|
Internal dimensions (WxDxH):
400 x 250 x 320 mm
|
Manufacturer Article Number:
IPP30
|
Material interior:
Stainless steel
|
Max. no. of inserts:
3
|
Max. temperature:
70 °C
|
Max. voltage:
230 V
|
Min. temperature:
0 °C
|
Nominal capacity:
32 l
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
140 W
|
Temperature:
0 ... 70 °C
|
Type:
IPP30
|
Type of auxiliary energy:
Mains connection
|
Weight:
40 kg
|
With timer:
Yes
Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.Extremely quiet, vibration-free and space saving as no compressor is requiredNo condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchangedLED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)SingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
20%
Depth int.:
250 mm
|
Ext. depth:
434 mm
|
Ext. height:
704 mm
|
Ext. width:
585 mm
|
External dimensions (WxDxH):
585 x 434 x 704 mm
|
Height int.:
320 mm
|
Int. width:
400 mm
|
Internal dimensions (WxDxH):
400 x 250 x 320 mm
|
Manufacturer Article Number:
UN30
|
Material interior:
Stainless steel 1.4301
|
Max. no. of inserts:
3
|
Max. temperature:
300 °C
|
Max. voltage:
230 V
|
Min. temperature:
+5 °C
|
Nominal capacity:
32 l
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1600 W
|
Temperature:
RT+5 ... 300 °C
|
Temperature addition:
RT
|
Type:
UN30
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104510
|
Weight:
45 kg
|
With timer:
Yes
The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Natural convectionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
20%
Depth int.:
250 mm
|
Ext. depth:
434 mm
|
Ext. height:
704 mm
|
Ext. width:
585 mm
|
External dimensions (WxDxH):
585 x 434 x 704 mm
|
Height int.:
320 mm
|
Int. width:
400 mm
|
Internal dimensions (WxDxH):
400 x 250 x 320 mm
|
Manufacturer Article Number:
UN30PLUS
|
Material interior:
Stainless steel 1.4301
|
Max. no. of inserts:
3
|
Max. temperature:
300 °C
|
Max. voltage:
230 V
|
Min. temperature:
+5 °C
|
Nominal capacity:
32 l
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1600 W
|
Temperature:
RT+5 ... 300 °C
|
Temperature addition:
RT
|
Type:
UN30plus
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104510
|
Weight:
45 kg
|
With timer:
Yes
The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Natural convectionTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
20%
External dimensions (W x D x H) mm:
745 x 555** x 864
|
Included grids:
2
|
Internal dimensions (W x D x H) mm:
560 x 400* x 480
|
Manufacturer Article Number:
HPP110ECO
|
Max. grids:
5
|
Nominal capacity l:
108
|
Rated capacity kW:
0.42
|
Rating W:
420
|
Shelf support ribs/shelves:
5/2
|
Type:
HPP110eco
|
Weight kg:
64
Thanks to unbeatable energy efficiency and low-maintenance operation, the HPPeco constant climate chambers are perfectly suited for stability tests, environmental testing and materials testing. The high precision temperature control as well as the active humidification and dehumidification were particularly adapted to the ICH guidelines, option Q1A, for stability tests.LED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)Heating and cooling seamlessly with one system thanks to Peltier technology. Almost vibration-free and extremely quietTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.comWorking temperature range sizes 110 - 1060Without light, without humidity:0 (at least 20 below ambient temperature) ... 70 °CWithout light, with humidity:5 (at least 20 below ambient temperature) ... 70 °CWorking temperature range sizes 110 - 750With light, without/with humidity:15 ... 40 °CWorking temperature range sizes 1400 - 2200Without light, without humidity:0 (at least 20 below ambient temperature) ... 70 °CWithout light, with humidity:15 (at least 10 below ambient temperature) ... 60 °CSetting accuracy temperature:0.1 °CSetting ranges humiditySizes 110 - 1060:10 ... 90 % rhSizes 1400 - 2200:10 ... 80 % rhSetting accuracy humidity:0.5 % rhPower supply:230 V, 50/60 Hz* Less 10 mm for fan-Peltier** Depth without door handle and Peltier element, please add 56 mm for door handle and 111 mm for Peltier element
20%
External dimensions (W x D x H) mm:
745 x 555** x 864
|
Included grids:
2
|
Internal dimensions (W x D x H) mm:
560 x 400* x 480
|
Max. grids:
5
|
Nominal capacity l:
108
|
Rated capacity kW:
0
|
Type:
IPP110ecoplus
|
Weight kg:
78
TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Depth int.:
400 mm
|
Ext. depth:
584 mm
|
Ext. height:
1104 mm
|
Ext. width:
745 mm
|
External dimensions (WxDxH):
745 x 584 x 1,104 mm
|
Height int.:
720 mm
|
Int. width:
560 mm
|
Internal dimensions (WxDxH):
560 x 400 x 720 mm
|
Manufacturer Article Number:
IN160 UK
|
Material inserts:
Stainless steel
|
Max. no. of inserts:
8
|
Max. temperature:
80 °C
|
Max. voltage:
230 V
|
Min. temperature:
+5 °C
|
Nominal capacity:
161 l
|
Plug type:
UK
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1600 W
|
Temperature:
RT+5 ... 80 °C
|
Temperature addition:
RT
|
Type:
IN160
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104400
|
Weight:
96 kg
|
With timer:
Yes
Incubators for research, medicine, pharmacy, and food technology. Ideal for all applications with temperatures up to 80 °C, especially for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are excluded, and the load is warmed up particularly carefully.User-friendly, intuitive operating menuPrecise and homogeneous temperature control thanks to product-specific heating conceptPre-heated fresh air prevents temperature fluctuationsWith inner glass doorNatural convectionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Variants from €1,319.00*
Depth int.:
570 mm
|
Ext. depth:
870 mm
|
Ext. height:
1590 mm
|
Ext. width:
1165 mm
|
External dimensions (WxDxH):
1,165 x 870 x 1,590 mm
|
Height int.:
1300 mm
|
IP code:
IP 20
|
Int. width:
1000 mm
|
Internal dimensions (WxDxH):
1,000 x 570 x 1,300 mm
|
Manufacturer Article Number:
9010-0301
|
Material interior:
Stainless steel
|
Max. no. of inserts:
16
|
Max. temperature:
300 °C
|
Max. voltage:
400 V·3/N/PE
|
Min. temperature:
+12 °C
|
Nominal capacity:
741 l
|
Plug type:
CEE
|
Power supply:
400 V·3/N/PE, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
4.5 kW
|
Temperature:
RT+12 ... 300 °C
|
Temperature addition:
RT
|
Temperature stability:
±0,6 K (150 °C)
|
Type:
FED 720
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104510
|
Weight:
166 kg
|
With timer:
Yes
Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convectionController with LCD display and enhanced timer functionsAdjustable fan speedEthernet interface
Variants from €2,660.00*
Depth int.:
330 mm
|
Ext. depth:
514 mm
|
Ext. height:
784 mm
|
Ext. width:
585 mm
|
External dimensions (WxDxH):
585 x 514 x 784 mm
|
Height int.:
400 mm
|
Int. width:
400 mm
|
Internal dimensions (WxDxH):
400 x 330 x 400 mm
|
Manufacturer Article Number:
IF55 UK
|
Material inserts:
Stainless steel
|
Max. no. of inserts:
4
|
Max. temperature:
80 °C
|
Max. voltage:
230 V
|
Min. temperature:
+10 °C
|
Nominal capacity:
53 l
|
Plug type:
UK
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1000 W
|
Temperature:
RT+10 ... 80 °C
|
Temperature addition:
RT
|
Type:
IF55
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104400
|
Weight:
57 kg
|
With timer:
Yes
Incubators for research, medicine, pharmacy, and food technology. Ideal for all applications with temperatures up to 80 °C, especially for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are excluded, and the load is warmed up particularly carefully.User-friendly, intuitive operating menuPrecise and homogeneous temperature control thanks to product-specific heating conceptPre-heated fresh air prevents temperature fluctuationsWith inner glass doorForced air circulationFan speed adjustableSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Variants from €1,640.00*
Depth int.:
250 mm
|
Ext. depth:
434 mm
|
Ext. height:
704 mm
|
Ext. width:
585 mm
|
External dimensions (WxDxH):
585 x 434 x 704 mm
|
Height int.:
320 mm
|
Int. width:
400 mm
|
Internal dimensions (WxDxH):
400 x 250 x 320 mm
|
Manufacturer Article Number:
SF30PLUS
|
Max. no. of inserts:
3
|
Max. temperature:
250 °C
|
Max. voltage:
230 V
|
Min. temperature:
+10 °C
|
Nominal capacity:
32 l
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1.6 kW
|
Temperature:
RT+10 ... 250 °C
|
Temperature addition:
RT
|
Type:
SF30plus
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104510
|
Weight:
46 kg
|
With timer:
Yes
Safer than disinfection, hot-air sterilisation of containers and instruments.The safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times.Textured stainless steel housing, rear of zinc-plated steel, intuitively operated TwinDISPLAY(TFT colour display) with touchscreenYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.comAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB and mechanical temperature limiter TB acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarm
Depth int.:
385 mm
|
Ext. depth:
605 mm
|
Ext. height:
735 mm
|
Ext. width:
710 mm
|
External dimensions (WxDxH):
710 x 605 x 735 mm
|
Height int.:
550 mm
|
IP code:
IP 20
|
Int. width:
550 mm
|
Internal dimensions (WxDxH):
550 x 385 x 550 mm
|
Manufacturer Article Number:
9010-0305
|
Material interior:
Stainless steel
|
Max. no. of inserts:
5
|
Max. temperature:
300 °C
|
Max. voltage:
230 V
|
Min. temperature:
+10 °C
|
Nominal capacity:
116 l
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1.3 kW
|
Temperature:
RT+10 ... 300 °C
|
Temperature addition:
RT
|
Temperature stability:
±0,3 K (150 °C)
|
Type:
FD 115
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104510
|
Weight:
54 kg
|
With timer:
Yes
Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convectionController with LCD display
Variants from €1,959.00*
Cooling system:
Cooling compressor
|
Depth int.:
386 mm
|
Ext. depth:
710 mm
|
Ext. height:
905 mm
|
Ext. width:
650 mm
|
External dimensions (WxDxH):
650 x 710 x 905 mm
|
Height int.:
400 mm
|
Int. width:
406 mm
|
Internal dimensions (WxDxH):
406 x 386 x 400 mm
|
Manufacturer Article Number:
9020-0471
|
Material inserts:
Stainless steel
|
Material interior:
Stainless steel
|
Max. no. of inserts:
4
|
Max. temperature:
70 °C
|
Max. voltage:
240 V
|
Min. temperature:
0 °C
|
Min. voltage:
220 V
|
Nominal capacity:
63 l
|
Plug type:
EU
|
Power supply:
220 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
0.9 kW
|
Temperature:
0 ... 70 °C
|
Temperature stability:
±0,2 K (37 °C)
|
Type:
KB 65
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104423
|
Weight:
95 kg
Die Kühlinkubatoren der KB Serie bestechen durch die APT.line™ Vorwärmkammertechnologie, sowie einem großen Temperaturbereich, wodurch sie sich für ein breites Anwendungsspektrum eignen. Sie beherrschen zudem eine Heißluft-Desinfektionsroutine. Die Kühlinkubatoren sind mit der bewährten Kompressortechnologie ausgestattet, um einen zuverlässigen und ausfallsicheren Langzeitbetrieb sicherzustellen. Dank der modernen Inverter-Kältemaschine und dem klimaneutralen Kältemittel R-600a wird eine energieeffiziente und umweltfreundliche Kühlung gewährleistet. Der Innenraum, sowie die zwei Einschubgitter sind aus Edelstahl, die Innentüren sind aus metalloxidbeschichtetem Sicherheitsglas gefertigt.Türheizung zur KondensatvermeidungEinfache Programmierung eines zweiten Temperatur-SollwertesInterner Datenlogger, Messwerte im offenen Format über USB-Schnittstelle auslesbarEthernet-SchnittstelleGeräteselbsttest zur umfassenden StatusanalyseTemperaturwählwächter Klasse 3.3 (DIN 12880) mit optischem und akustischem AlarmGroße Durchführung mit SilikonstopfenTischgeräte sind stapelbar (für Modelle bis 130 l Volumen)Standgeräte mit robusten Doppel-Lenkrollen, vorne mit Feststellern
Depth int.:
380 mm
|
Ext. depth:
565 mm
|
Ext. height:
625 mm
|
Ext. width:
560 mm
|
External dimensions (WxDxH):
560 x 565 x 625 mm
|
Height int.:
420 mm
|
IP code:
IP 20
|
Int. width:
360 mm
|
Internal dimensions (WxDxH):
360 x 380 x 420 mm
|
Manufacturer Article Number:
9010-0324
|
Max. no. of inserts:
4
|
Max. temperature:
100 °C
|
Max. voltage:
120 V
|
Min. temperature:
+5 °C
|
Nominal capacity:
57 l
|
Plug type:
US
|
Power supply:
120 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Rated capacity:
0.3 kW
|
Temperature:
RT+5 ... 100 °C
|
Temperature addition:
RT
|
Temperature stability:
±0,1 K (37 °C)
|
Type:
BD 56UL
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104400
|
Weight:
39 kg
|
With timer:
Yes
Incubators with homogeneous temperature distribution ensure the best results for a wide range of incubation tasks.High temperature accuracy thanks to APT.line™ technology100 °C disinfection routineHigh process reliabilityController with LCD displayElectromechanical control of the exhaust air flapInner door made of tempered safety glass2 chrome-plated racksChambers up to 115 l are stackableClass 3.1 integrated independent temperature safety device (DIN 12880) with visual alarmErgonomic handle designUSB connection for data recordingIncubators with natural convection
Depth int.:
810 mm
|
Ext. depth:
1400 mm
|
Ext. height:
1710 mm
|
Ext. width:
1115 mm
|
External dimensions (WxDxH):
1,115 x 1,400 x 1,710 mm
|
Height int.:
700 mm
|
Int. width:
735 mm
|
Internal dimensions (WxDxH):
735 x 810 x 700 mm
|
Manufacturer Article Number:
9020-0408
|
Material inserts:
Stainless steel
|
Material interior:
Stainless steel
|
Max. no. of inserts:
6
|
Max. relative humidity:
98 %
|
Max. temperature:
180 °C
|
Max. voltage:
400 V·3/N/PE
|
Min. relative humidity:
10 %
|
Min. temperature:
-40 °C
|
Nominal capacity:
417 l
|
Plug type:
CEE
|
Power supply:
400 V·3/N/PE, 50 Hz
|
Power supply frequency:
50 Hz
|
Rated capacity:
8 kW
|
Relative humidity:
10 ... 98 %
|
Temperature:
-40 ... 180 °C
|
Temperature stability:
0,1 ... 0,5 K
|
Type:
MKF 400
|
Type of auxiliary energy:
Mains connection
|
Weight:
432 kg
|
With CO₂ control:
No
Environmental chambers are ideal for material testing under dynamic conditions. The standard rapid alternation speeds of approx. 5 K/min enable standard-compliant testing.Homogeneous climate conditions thanks to APT.line™ preheating chamber technologyTouchscreen controller with time-segment and real-time programmingInternal data logger, measured values can be read out via USBProgrammable condensation protectionTroubleshooting system with visual and acoustic alarmsCFC-free refrigerant R-452AHeated viewing window with LED interior lighting1 stainless steel rackHumidity regulation with capacitive humidity sensor and responsive steam humidificationAutomatic water and wastewater managementIntegrated 20 l water storage tank4 zero-voltage relay contactsModels with 480 V nominal voltage are equipped with a voltage and frequency converter.Temperature range:-40 ... 180 °CTemperature range climate:10 ... 95 °CHumidity range:10 ... 98 % RHHumidity fluctuation:≤2.5 K ± % RH
Variants from €19,549.00*
For:
MK 400/MKF 400
|
Manufacturer Article Number:
8012-2260
|
Material:
Stainless steel
|
Type of insert:
Einschubblech
Shelves made of stainless steel, perforated.If you are ordering replacement shelves, please provide the serial number prior to ordering, since it might be necessary to order other shelves with different dimensions.
Variants from €71.60*
CO₂ range:
0 ... 20 %
|
Depth int.:
575 mm
|
Ext. depth:
785 mm
|
Ext. height:
1020 mm
|
Ext. width:
740 mm
|
External dimensions (WxDxH):
740 x 785 x 1,020 mm
|
Height int.:
750 mm
|
Int. width:
620 mm
|
Internal dimensions (WxDxH):
620 x 575 x 750 mm
|
Manufacturer Article Number:
9640-0021
|
Material interior:
Stainless steel
|
Max. CO₂:
20 %
|
Max. no. of inserts:
8
|
Max. relative humidity:
95 %
|
Max. temperature:
60 °C
|
Max. voltage:
230 V
|
Min. CO₂:
0 %
|
Min. relative humidity:
50 %
|
Min. temperature:
+6 °C
|
Min. voltage:
200 V
|
Nominal capacity:
267 l
|
Plug type:
EU
|
Power supply:
200 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1.5 kW
|
Relative humidity:
50 ... 95 %
|
Temperature:
RT+6 ... 60 °C
|
Temperature addition:
RT
|
Temperature stability:
±0,1 K (37 °C)
|
Type:
CBF 260
|
Type of auxiliary energy:
Mains connection
|
Weight:
126 kg
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactContamination-safe humidification system without water panTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
Variants from €12,762.00*
CO₂ range:
0 ... 20 %
|
Depth int.:
575 mm
|
Ext. depth:
785 mm
|
Ext. height:
1020 mm
|
Ext. width:
740 mm
|
External dimensions (WxDxH):
740 x 785 x 1,020 mm
|
Height int.:
750 mm
|
Int. width:
620 mm
|
Internal dimensions (WxDxH):
620 x 575 x 750 mm
|
Manufacturer Article Number:
9640-0013
|
Material interior:
Stainless steel
|
Max. CO₂:
20 %
|
Max. no. of inserts:
8
|
Max. relative humidity:
95 %
|
Max. temperature:
60 °C
|
Max. voltage:
230 V
|
Min. CO₂:
0 %
|
Min. relative humidity:
90 %
|
Min. temperature:
+5 °C
|
Min. voltage:
200 V
|
Nominal capacity:
267 l
|
Plug type:
EU
|
Power supply:
200 ... 230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1.5 kW
|
Relative humidity:
90 ... 95 %
|
Temperature:
RT+5 ... 60 °C
|
Temperature addition:
RT
|
Temperature stability:
±0,1 K (37 °C)
|
Type:
CB 260
|
Type of auxiliary energy:
Mains connection
|
Weight:
125 kg
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
Variants from €8,560.00*
Depth int.:
371 mm
|
Ext. depth:
570 mm
|
Ext. height:
576 mm
|
Ext. width:
744 mm
|
External dimensions (WxDxH):
744 x 570 x 576 mm
|
Height int.:
345 mm
|
IP code:
IP 20
|
Int. width:
415 mm
|
Internal dimensions (WxDxH):
415 x 371 x 345 mm
|
Manufacturer Article Number:
51014548
|
Material interior:
Stainless steel 1.4404
|
Max. no. of inserts:
2
|
Max. temperature:
300 °C
|
Max. voltage:
230 V
|
Min. temperature:
+10 °C
|
Nominal capacity:
53 l
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1600 W
|
Temperature:
RT+10 ... 300 °C
|
Temperature addition:
RT
|
Type:
VT 6060 P-BL
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104510
|
Ultimate vacuum:
0.01 mbar
|
Weight:
90 kg
For the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steelSilicone door sealSmall flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinetAn overheat cut-out (Class 2) is supplied as standardTubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.
Depth int.:
310 mm
|
Ext. depth:
577 mm
|
Ext. height:
625 mm
|
Ext. width:
614 mm
|
External dimensions (WxDxH):
614 x 577 x 625 mm
|
Height int.:
440 mm
|
IP code:
IP 20
|
Int. width:
400 mm
|
Internal dimensions (WxDxH):
400 x 310 x 440 mm
|
Manufacturer Article Number:
9090-0018
|
Material interior:
Stainless steel
|
Max. no. of inserts:
3
|
Max. temperature:
250 °C
|
Max. voltage:
230 V
|
Min. temperature:
+10 °C
|
Nominal capacity:
55 l
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1.1 kW
|
Temperature:
RT+10 ... 250 °C
|
Temperature addition:
RT
|
Temperature stability:
±0,4 K (150 °C)
|
Type:
FD-S 56
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104510
|
Weight:
35 kg
|
With timer:
Yes
Drying and heating chambers are suitable for drying and heat storage in research and quality assurance.Easy handlingAccurate temperature controlSimple and ergonomic door openingAPT.line™ preheating chamber technologyAdjustable exhaust air flapController with timer functionClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convection for homogenous temperature distribution.
Depth int.:
307 mm
|
Ext. depth:
450 mm
|
Ext. height:
600 mm
|
Ext. width:
480 mm
|
External dimensions (WxDxH):
480 x 450 x 600 mm
|
Height int.:
275 mm
|
IP code:
IP 20
|
Int. width:
300 mm
|
Internal dimensions (WxDxH):
300 x 307 x 275 mm
|
Manufacturer Article Number:
51014553
|
Max. no. of inserts:
4
|
Max. temperature:
200 °C
|
Max. voltage:
230 V
|
Min. temperature:
+15 °C
|
Nominal capacity:
25 l
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
1300 W
|
Temperature:
RT+15 ... 200 °C
|
Temperature addition:
RT
|
Type:
VT 6025
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104510
|
Ultimate vacuum:
0.01 mbar
|
Weight:
58 kg
For the gentle and rapid drying or heat treatment of temperature sensitive substances and components in the electronics, pharmacy, cosmetics and biochemistry fields. With double glazed safety glass door window, very low external casing temperature, freely adjustable overheat cut-out with separate temperature sensor, Kelvitron® microprocessor controlled temperature controller and pull-out, non-tilting shelves with end stops.With stainless steel vacuum ball valve, inert gas connection, digital pressure display, recorder connection, overpressure safety and precision valve, seamlessly welded chamber, and DN25 access port
Depth int.:
340 mm
|
Ext. depth:
565 mm
|
Ext. height:
625 mm
|
Ext. width:
560 mm
|
External dimensions (WxDxH):
560 x 565 x 625 mm
|
Height int.:
440 mm
|
IP code:
IP 20
|
Int. width:
400 mm
|
Internal dimensions (WxDxH):
400 x 340 x 440 mm
|
Manufacturer Article Number:
9010-0313
|
Max. no. of inserts:
4
|
Max. temperature:
100 °C
|
Max. voltage:
230 V
|
Min. temperature:
+7 °C
|
Nominal capacity:
59 l
|
Plug type:
EU
|
Power supply:
230 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
0.4 kW
|
Temperature:
RT+7 ... 100 °C
|
Temperature addition:
RT
|
Temperature stability:
±0,1 K (37 °C)
|
Type:
BF 56
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104400
|
Weight:
39 kg
|
With timer:
Yes
Incubators with homogeneous temperature distribution ensure the best results for a wide range of incubation tasks.High temperature accuracy thanks to APT.line™ technology100 °C disinfection routineHigh process reliabilityController with LCD displayElectromechanical control of the exhaust air flapInner door made of tempered safety glass2 chrome-plated racksChambers up to 115 l are stackableClass 3.1 integrated independent temperature safety device (DIN 12880) with visual alarmErgonomic handle designUSB connection for data recordingIncubators with forced convectionAdjustable fan speedTemperature stability ±0.1 K (at 37 °C)
Depth int.:
443 mm
|
Ext. depth:
925 mm
|
Ext. height:
1940 mm
|
Ext. width:
1115 mm
|
External dimensions (WxDxH):
1,115 x 925 x 1,940 mm
|
Height int.:
700 mm
|
Int. width:
735 mm
|
Internal dimensions (WxDxH):
735 x 443 x 700 mm
|
Manufacturer Article Number:
9020-0383
|
Material inserts:
Stainless steel
|
Material interior:
Stainless steel
|
Max. no. of inserts:
6
|
Max. relative humidity:
98 %
|
Max. temperature:
180 °C
|
Max. voltage:
400 V·3/N/PE
|
Min. relative humidity:
10 %
|
Min. temperature:
-70 °C
|
Nominal capacity:
228 l
|
Plug type:
CEE
|
Power supply:
400 V·3/N/PE, 50 Hz
|
Power supply frequency:
50 Hz
|
Rated capacity:
6 kW
|
Relative humidity:
10 ... 98 %
|
Temperature:
-70 ... 180 °C
|
Temperature stability:
0,1 ... 0,5 K
|
Type:
MKFT 240
|
Type of auxiliary energy:
Mains connection
|
Weight:
415 kg
|
With CO₂ control:
No
Umweltsimulationsschränke sind ideal für Materialprüfungen unter dynamischen Bedingungen. Die standardmäßig hohen Wechselgeschwindigkeiten von ca. 5 K/min ermöglichen eine normgerechte Prüfung.Homogene Klimabedingungen durch APT.line™ VorwärmkammertechnologieTouchscreen Controller mit Zeitabschnitts- und EchtzeitprogrammierungInterner Datenlogger, Messwerte über USB auslesbarProgrammierbarer BetauungsschutzFehlerdiagnosesystem mit optischem und akustischem AlarmBeheiztes Sichtfenster mit LED-InnenraumbeleuchtungBINDER Multi Management Software APT-COM™ Basic EditionTemperaturwählbegrenzer Klasse 2 (DIN 12880) mit optischem AlarmEthernet-SchnittstelleEinstellbare RampenfunktionIntegrierter LinienschreiberTürheizungInnenraum aus Edelstahl1 Einschubgitter aus EdelstahlFeuchteregelung mit kapazitivem Feuchtesensor und reaktionsschnelle DampfbefeuchtungAutomatisches Wasser- und AbwassermanagementIntegrierter 20 l Wasservorratsbehälter4 potenzialfreie SchaltkontakteFCKW-freies Kältemittel R-452A und R-23Modelle mit 480 V Nennspannung sind mit einem Spannungs- und Frequenzwandler ausgestattet.
Cooling system:
Cooling compressor
|
Depth int.:
415 mm
|
Ext. depth:
635 mm
|
Ext. height:
1000 mm
|
Ext. width:
700 mm
|
External dimensions (WxDxH):
700 x 635 x 1,000 mm
|
Height int.:
550 mm
|
IP code:
IP 20
|
Int. width:
550 mm
|
Internal dimensions (WxDxH):
550 x 415 x 550 mm
|
Manufacturer Article Number:
0020126186
|
Material interior:
Stainless steel 1.4301
|
Max. no. of inserts:
6
|
Max. temperature:
100 °C
|
Max. voltage:
240 V
|
Min. temperature:
-5 °C
|
Min. voltage:
220 V
|
Nominal capacity:
125 l
|
Plug type:
EU
|
Power supply:
220 ... 240 V, 50/60 Hz
|
Power supply frequency:
50/60 Hz
|
Rated capacity:
950 W
|
Temperature:
-5 ... 100 °C
|
Temperature stability:
±0,2 K
|
Type:
INC 125 FC
|
Type of auxiliary energy:
Mains connection
|
Weight:
80 kg
|
With timer:
Yes
Ideal for microbiological applications thanks to the wide temperature range and precise temperature control. Resource and environmentally friendly thanks to powerful compressor cooling technology.Decontamination mode with 100 °CInternal air circulation can be influenced by electronically adjustable fan speedUse of the natural refrigerant R290Excellent temperature management and optimised energy consumption thanks to very good insulation of the inner chamberAdditional inner glass doorEasy cleaning of the spacious interior thanks to rounded corners and smooth surfacesDefrost function with continuous water drainage through drain openingDoor hinge on the right, can be changed on requestOptional lockable doorInstallation and operation qualification (IQ/OQ) available on requestScope of supply: Cooling incubator INC 125 FC, 2 x wire grid trays IO T 2.10, 2 x tilt protection/assembly material, USB A-B cable, calibration certificate at 37 °C and 10 °C, hose adapter (for Ø 9 to 11 mm)
Depth int.:
520 mm
|
Ext. depth:
765 mm
|
Ext. height:
1025 mm
|
Ext. width:
1235 mm
|
External dimensions (WxDxH):
1,235 x 765 x 1,025 mm
|
Height int.:
800 mm
|
IP code:
IP 20
|
Int. width:
1000 mm
|
Internal dimensions (WxDxH):
1,000 x 520 x 800 mm
|
Manufacturer Article Number:
9010-0168
|
Material interior:
Stainless steel
|
Max. no. of inserts:
10
|
Max. temperature:
300 °C
|
Max. voltage:
208 V
|
Min. temperature:
+5 °C
|
Nominal capacity:
400 l
|
Plug type:
US
|
Power supply:
208 V, 60 Hz
|
Power supply frequency:
60 Hz
|
Rated capacity:
3.4 kW
|
Temperature:
RT+5 ... 300 °C
|
Temperature addition:
RT
|
Temperature stability:
±0,5 K (150 °C)
|
Type:
ED 400UL
|
Type of auxiliary energy:
Mains connection
|
UNSPSC:
41104510
|
Weight:
125 kg
|
With timer:
Yes
Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.Uniform drying conditions thanks to APT.line™ preheating chamber technologyIdentical test conditions throughout the chamber interior independent of sample size and quantityAdjustable exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmWith natural convectionController with timer functions
Depth int.:
350 mm
|
Ext. depth:
778 mm
|
Ext. height:
1445 mm
|
Ext. width:
720 mm
|
External dimensions (WxDxH):
720 x 778 x 1,445 mm
|
Height int.:
420 mm
|
Int. width:
400 mm
|
Internal dimensions (WxDxH):
400 x 350 x 420 mm
|
Manufacturer Article Number:
9020-0374
|
Material inserts:
Stainless steel
|
Material interior:
Stainless steel
|
Max. no. of inserts:
4
|
Max. temperature:
180 °C
|
Max. voltage:
230 V
|
Min. temperature:
-40 °C
|
Nominal capacity:
60 l
|
Plug type:
EU
|
Power supply:
230 V, 50 Hz
|
Power supply frequency:
50 Hz
|
Rated capacity:
2.8 kW
|
Temperature:
-40 ... 180 °C
|
Temperature stability:
0,1 ... 0,5 K
|
Type:
MK 56
|
Type of auxiliary energy:
Mains connection
|
Weight:
165 kg
|
With CO₂ control:
No
Environmental chambers are ideal for material testing under dynamic conditions. The standard rapid alternation speeds of approx. 5 K/min enable standard-compliant testing.Homogeneous climate conditions thanks to APT.line™ preheating chamber technologyTouchscreen controller with time-segment and real-time programmingInternal data logger, measured values can be read out via USBProgrammable condensation protectionTroubleshooting system with visual and acoustic alarmsCFC-free refrigerant R-452AHeated viewing window with LED interior lighting1 stainless steel rackModels with 480 V nominal voltage are equipped with a voltage and frequency converter.Temperature range:-40 ... 180 °CTemperature fluctuation:±0.1 ... 0.5 K
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.99*