Crystal clear, PC dome lid. PP. Lower section and desiccant tray. Venting stopper with non-return valve in lid. Polychlorbutadiene rubber (CK) O-ring seal between lid and base which is compressed when vacuum is applied. Lightweight and easy to use.

PP. For use at room temperature. Not suitable for use with hot crucibles.

Neoprene rubber.

This lightweight plastic vacuum desiccator holds a full vacuum of 760 mm Hg at room temperature for 24 hours.Polycarbonate lid with large ribbed buttonWhite PP baseIncl. 0.32 cm thick perforated plateConical polypropylene valve with PTFE cone, for hoses with 6.4 - 9.5 mm I.D.With neoprene O-ring, for sealing up to 0 °C without grease

Ideal for transporting biological and clinical samples, as well as instruments and products that you want to keep clean and dry under testing environmental conditions. Are light weight and easy to carry; they are ideal for moving samples that must be protected from humidity, dust and other environmental influence. The clarity of the DURAPorter™ enables the user to visibly check sample integrity, so that it can be opened using the right precautions.Polycarbonate construction are available in three colours for use/owner identificationSilicone water-tight seal and three lid clasps provide secure closureCarry handle folds neatly into body space allowing the units to be stackedLid opens a full 180°, allowing total access to contents and making it easier to cleanWill accommodate 13 and 16 mm tubes in a 72-place one rack®, or similar sized/brand of rackUse the separators provided to create your own compartment sizes, or use empty to transport larger products and equipmentAutoclavableMatching rack (e.g. Cat. No. 9.193 997, 9.193 998) please order separately. Further colours available on request.

Transparent, lightweight, unbreakable, for vacuum or non-vacuum use. With stopcock. Large, stable base. No danger of implosion. Capable of maintaining 0.95 bar negative pressure over a 24 hour period. With silicone O-ring, no lubrication required. Suitable for 230 mm diameter desiccator discs or plates. Max. height over plate 195 mm. Suitable for vacuum hoses with an inner diameter of 6 to 10 mm.Plate not included.

Clear glass, with porcelain plate, without vacuum connector.

With porcelain plate. Vacuum-tight. The stopcock has an outer diameter of approx. 9 mm.

With porcelain plate.

With PTFE spindle. For NOVUS-type desiccators.Cone: NS 24/29, bore: NW 2,5 mm, hose connection: outer dia. 8 mm.

Transparent PC bell and blue PP lower part. Will not break or implode under vacuum provided that the operating instructions are obeyed. Lower part is resistant to diluted acids, alkalis and other common desiccants. Vacuum connection at lower part. TFE stopcock is suitable for vacuum tubing 6.4mm i.d. For air tight sealing it is sufficient to grease sealing surface a little. No additional sealing ring is necessary. The additional rim at the bell prevents grease stains on lab benches.

With PTFE spindle. For NOVUS-type desiccators.Cone: NS 24/29, bore: NW 2,5 mm, hose connection: outer dia. 8 mm.

For moisture reduction in desiccators and precision laboratory instruments. The transparent polypropylene dish allows visual inspection of silica gel, which changes in colour from blue to pale pink as it absorbs moisture. The desiccant can be easily regenerated by heating cartridges in an oven at 50°C overnight or at 100°C for 6 hours. For faster regeneration, remove the membrane lid, heat the spent gel crystals in a suitable glass or porcelain dish at 150°C in the oven for one hour.Inert, non-corrosive, non-toxic silica gelIndividually foil sealed

Light-green, ceramic-metal composite. With numbered quadrants. Autoclavable.

All components requiring controlled storage conditions can be stored in the transparent drying chambers, from anhydrous and hygroscopic materials to electronic equipment.Safe sealing with neoprene door sealsDoors secured with two stainless steel locks (three at the largest chamber) and a hinge running over the entire door heightRemovable tray with rim for solid desiccantsInserts are removable, height-adjustable and provided with holes

For dry storage of humidity sensitive products, such as laboratory reagents and samples, optical equipment, electronics, and 3D printing filament.Desiccant-freeKeeps internal humidity at 20-40 %LCD display for internal temperature and humidity levelHigh density foam gasketsLarge clear polycarbonate panelsScope of supply:Desiccator cabinet, 3 shelves

Perforated. Without feet. To DIN 12911. 20mm diameter central hole and 5mm diameter outer holes.

For dry storage of humidity sensitive products, such as laboratory reagents and samples, optical equipment, electronics, and 3D printing filament.LCD display for internal temperature and humidity levelHigh density foam gasketsLarge clear polycarbonate panelsScope of supply:Desiccator cabinet, 3 shelves

Lower portion can be filled with desiccants. The materials to be dried are placed on a perforated disc made of PP. The lid is sealed with a neoprene gasket. Ideal for use in educational laboratories. Also available with stopcock for evacuation.

Silica-Gel Perlen, sind feuchtigkeitsabsorbierende, selbst anzeigende Trockenmittel. Sie sind frei von Schwermetallen und umweltverträglich. Die Originalfarbe orange ändert sich stufenweise zu weiß während das Gel Feuchtigkeit absorbiert. Silica-Gel Perlen können regeneriert werden, wenn Sie auf eine Temperatur von maximal 120 °C erhitzt werden.

With non-return valve.

DURAN® vacuum desiccators complete - with porcelain plate and vacuum connection.DIN ISO 13130Standard ground joint (NS 24/29) junction tube in the lidStopcock with PTFE spindleWith flat flange

DIN ISO 13130Gewindeanschluss GL 32Hahn mit PTFE-SpindelPBT Schraubverschluss