Quick delivery
Capacity l:
20.0
|
Manufacturer Article Number:
20687012
|
Type:
Oil for rotary vane pumps B
|
UNSPSC:
41-10-51-09
Oil for rotary vane pumps B: Standard pump oil. High viscosity, low vapour pressure, good chemical resistance.Oil for rotary vane pumps K 8: For acid vapours. Strongly hygroscopic, with limited capacity for water vapour. Pump must be factory-adjusted to accept this oil.Perfluorpolyether oil: Synthetic Oil. Certified for pumping pure oxygen.Oil for rotary vane pumps B: Standard pump oil. High viscosity, low vapour pressure, good chemical resistance.Oil for rotary vane pumps K 8: For acid vapours. Strongly hygroscopic, with limited capacity for water vapour. Pump must be factory-adjusted to accept this oil.Perfluorpolyether oil: Synthetic Oil. Certified for pumping pure oxygen.Hazardous Substance DataSDSLink
Variants from €39.49*
B* One-off bending:
150
|
B* Repeated bending:
300
|
Dual Use:
0
|
Length mm:
500
|
Manufacturer Article Number:
20686030
|
Size:
DN 16
Antistatic PTFE. Flanges in grade 1.4305 stainless steel.Virtually smooth internal walls to prevent accumulation of condensate or particles, provide high throughput with minimal turbulence.chemically resistant PTFEantistatic according to BS 2050:1978*,
Manufacturer Article Number:
17530
|
Type:
Chemistry pump device GP3
The mobile chemistry pump stand has a cold trap and a pump fork with a separate aeration cell. The pump fork has four independently switched vacuum valves and additionally four independently switched aeration valves. So can every sample holder get individually evacuated or aerated without affecting the vacuum of the other sample holders. You can also connect an electronic vacuum gauge. The vacuum pump is not included in the delivery.Small flange KF-NW 16 with vacuum manometerGL18 glass screw thread10 mm PTFE-olivePE-table plateAluminum-rackFour lockable guide rollsSpecificationsCapacity with cold trap:2000 mlCondensate capacity of cold trap:max. 250 ml
Manufacturer Article Number:
20662701
|
NS:
14 / 23
|
Type:
Male ground joint - DN 10
Small flanges. Stainless steel. With male or female conical ground joints and DN flange as outlined below.
Variants from €52.50*
Description:
KF DN 16
|
Manufacturer Article Number:
20665007
|
Type:
VS 16C
|
Valve bore mm:
16
Butterfly design. Housing made of stainless steel with fluoroelastomer seal. Two Buna-N rings act as rotary shaft seals. Helium leak-tested. Leak rate 1 x 10-6 mbar x l/s. Excellent throughput.
Variants from €386.00*
For tubing Ø mm:
12
|
Manufacturer Article Number:
20662530
|
Size:
DN 10
|
UNSPSC:
41-12-18-15
Flanged tubing nozzles, aluminium. For Type KF small flange.
Variants from €24.53*
Manufacturer Article Number:
20677132
|
Type:
Connection element A2 with external thread M24x1 mm
The VACUU LAN® local vacuum network allows multiple work stations to be connected to a single vacuum pump. This is useful for almost any conventional vacuum application in a chemical laboratory VACUU LAN® can be directly incorporated into new laboratory installations or retro-fitted. All assemblies have integral check (1-way) valves. A practical and economical solution for multiple vacuum users in a single laboratory.Detailed brochures are available on request!
Variants from €34.21*
Manufacturer Article Number:
20660190
|
Size:
DN 10/16
|
Type:
NBR
Plastic 'PBT'. For Type KF small flange.
Int. diam. mm:
6
|
Manufacturer Article Number:
20686000
|
Outer diam. mm:
12
Heavy-walled and flexible.
B1:
18
|
B2:
50
|
Length mm:
250
|
Manufacturer Article Number:
20673305
|
Size:
DN 10
Flanged at both ends. For Type KF small flange. B1 = Minimum radius for one-off bending.B2 = Minimum radius for repeated bending.
Length mm:
500
|
Manufacturer Article Number:
20686010
|
Size:
DN 16
Flanged at both ends. For Type KF small flange. Resistant to most chemicals.
Manufacturer Article Number:
20660000
|
Size:
DN 10/16
|
Type:
Aluminium
Manufacturer Article Number:
20660120
|
Size:
DN 10
Stainless steel/FPM (e.g. Viton®). For Type KF small flange.
Manufacturer Article Number:
1707
|
Type:
With pressure gauge
Vacuum pump trolley with two condensate traps that can be operated alternately or together. The pump trolley consists of an aluminium frame mounted on lockable castors with a lower PE-shelf for a vacuum pump and a PE-top shelf which accommodates two cold traps. The condensate traps can each hold approx. 150ml. Spherical ground joints are sealed with FEP covered O-rings. Supplied without pump.The standard assembly is designed for use with LN2 as coolant. When using CO2and acetone please order 2 x CO2 grid (Cat. No. 9.032 081).Note: Price does not include vacuum pump.
Variants from €4,377.46*
For tubing Ø mm:
10
|
Manufacturer Article Number:
20662806
|
Size:
KF DN 16
Flanged tubing nozzles, aluminium. For Type KF small flange.
Description:
Mains cable
|
Dual Use:
0
|
Manufacturer Article Number:
20612058
|
Plug type:
CEE
|
UNSPSC:
60-10-49-12
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.32*
Promotion
Evaporating basins, porcelain, shallow form
Glazed inside and outside except for rim.
Variants from €12.32*